Power Manager and Access Connections crash, neither help nor solution from Lenovo!?!

Hello
I've already posted here on the forum several weeks ago about the obvious problem that Lenovo has with the latest version of the Power Manager and the Access Connections which both crash either on startup or while tryibg to open it.
So far there has been neither an update, nor a solution nor an official statement from Lenovo about that problem that consists rightnow for over two month!
When searching the forum I see the same all over again: Unanswered threads, solutions that don't solve anything at all and so on...
And just if someone here comes up with comments like:
"work's here" or "just rollback to the old version", what is the point of writing software that doesn't work?? And why not giving ANY SUPPORT AT ALL???!!!
 I really would at least like to see an official statement saying "we work on it". After buying one of the most expensive notebooks on the market (and in my opinion still one of the best) hat would be the least one could expect form a "award wining" company like Lenovo...
Regards
Martin Pauli

Hello, I am a Help Desk Consultant at Rensselaer Polytechnic Institute and currently, we've had many problems with access connections, 4965 agn wireless card, and its drivers.
Symptoms:
1) Wireless card is detected my windows device manager
2) Wireless card is NOT detected by access connections, intel wireless utilities/tests/etc
Other related information:
1)  Events with ID 7036 + source: NETw#v## (the # stand for numbers, I can't quiet remember which ones but the one after the v is a 5
2) Rollback driver is NEVER an abailable option
3) Every failure case with same symptoms came in starting mid September
4) If you select "show hidden devices" in device manager, there is a huge number of devices, most of which seem to be repeats
After many hours of debugging and fustrated complaints, I have determined that it could be one of many problems:
1) Teredo tunnelling: Apparently, atheros/intel/access connections won't find the wireless card if teredo has been enabled or something
2) Power management: A default setting is "let windows turn the wireless off it there's not enough power" in wireless properties>configure>power management
3) Driver update combination conflict: between a update on 9/21 and present time, there's something horribly gone wrong
If anyone has a definitie solution to this, please post. 

Similar Messages

  • Latest versions of Power Manager and Access Connections got borked.

     I have a T60p running a fully patched XP SP2, model 2007CS3, and I work for IBM. I'm posting this because our internal IT support team has no clue how to fix this.
    I updated Power Manager to 1.52 when it had initially released, and since then it always fails with  an error in pwmuictl.dll, however the taskbar indicator is working properly. So I have to rely on Windows' built in power management only.
    Couple of days back I updated the ethernet drivers  to 9.12.41.1001 as in the latest package listed on the site.
    After that Access Connections 5.2 stopped working- the AcSvc service would fail on startup and subsequent restarts.
    I rolled back the ethernet driver to the previous version- uninstalled the device and reinstalled specifying the older drivers- to no avail.
    After a lot of struggle I downgraded it to version 4.23 that is used internally- and now my LEAP based wifi does not work. If I create a new connection profile- Access Connections craps out after filling in wifi security parameters. I reset my LEAP password  and tried again- it still does not connect.
    So effectively, updating the ethernet drivers turned out to be a big mistake. I hope someone can help, if you need additional information/screenshots let me know.

    Hello Martin,
    you have AC 5.02 instead 4.52 installed, like your screenshot shows.
    Some user have been experienced problems with this version and the version of new Powermanager.
    So if your system runs satisfactionally then there is no need to update.
    I would roll back and see if your program became operationally again.
    Kind regards
    Andreas
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • ThinkVantage Access Connections, Power Manager, and Toolbox all crash on startup

    I have a SL 500 with factory Vista , updated to SP2 and the current versions of the thinkvantage components.
    Access Connections has always been very buggy of this machine (I guess the battery monitor has been as well), When I attempted to update them this is where I ended up.
    Also just installed new .net framework 4 as well.
    thanks for any help 
    ian
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: CLR20r3
      Problem Signature 01: pcdrcui.exe
      Problem Signature 02: 6.0.5514.59
      Problem Signature 03: 4c0eb0cb
      Problem Signature 04: wpfview
      Problem Signature 05: 6.0.5514.59
      Problem Signature 06: 4c0eb0cb
      Problem Signature 07: f8
      Problem Signature 08: 9c
      Problem Signature 09: System.IO.FileNotFoundException
      OS Version: 6.0.6002.2.2.0.256.6
      Locale ID: 1033
    Description:  Stopped working
    Problem signature:  Problem Event Name: CLR20r3  Problem Signature 01: pcdrcui.exe  Problem Signature 02: 6.0.5514.59  Problem Signature 03: 4c0eb0cb  Problem Signature 04: wpfview  Problem Signature 05: 6.0.5514.59  Problem Signature 06: 4c0eb0cb  Problem Signature 07: f8  Problem Signature 08: 9c  Problem Signature 09: System.IO.FileNotFoundException  OS Version: 6.0.6002.2.2.0.256.6  Locale ID: 1033
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: PWMUI.EXE
      Application Version: 1.0.0.0
      Application Timestamp: 4bea35c2
      Fault Module Name: KERNEL32.dll
      Fault Module Version: 6.0.6002.18005
      Fault Module Timestamp: 49e037dd
      Exception Code: e0434f4d
      Exception Offset: 0003fbae
      OS Version: 6.0.6002.2.2.0.256.6
      Locale ID: 1033
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Access Connections.exe
      Application Version: 5.3.0.0
      Application Timestamp: 4bcff8d0
      Fault Module Name: KERNEL32.dll
      Fault Module Version: 6.0.6002.18005
      Fault Module Timestamp: 49e037dd
      Exception Code: e0434f4d
      Exception Offset: 0003fbae
      OS Version: 6.0.6002.2.2.0.256.6
      Locale ID: 1033

    Hi...
    I too have  got the same problem...
    i dont know when it started as it was running fine....earlier..
    In Access Connections the 'right click' menu on the taskbar runs just fine ..but the Access Connections program crashes on opening..
    The wireless status also runs fine
    Same is the case with Power Manager
    Shows the right battery status and the right click menu runs fine..but the Power Manager application crashes
    Like by the Lenovo toolbox too crashes
    I am using Lenovo X100e with win 7 starter edition
    i had .net framework 2 installed ...3.5 doesnt install and.net framework 4 installed after the problems started ...but still the problem hasnt stopped

  • Access Connection crash when editing

    Hi,
    Latest version of access connection crash when I try to edit and save an existing profile.
    Last time we had this (there is 2 years) it was due to something wrong in translated version.
    Best regards

    hey Poil,
    could you explain more on what is going on ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • User management and Access Control in HCM Cloud

    Hello,
    Information is scarce about User management and Access Control in Oracle Cloud generally. Today, I have two questions :
    - How can I bridge HCM Cloud user store with my on-premise IDM or security repository in order to allow identty governance to flow to HCM Cloud service ?
    The only information I got was that you can declare manually and by bulk import through files my users. This is not really interresting as I have an automatic IDM with workflows and identity control on provisioning and de-provisioning.
    Is there a SPML or proprietary endpoint to do it automatically ? What are the prerequisites ? Do I have to implement OIM on my side ?
    - Once my users are created, how can I do webSSO from my internal security repositories to the HCM Cloud service ?
    I do not want to distribute new set of login / passwords to my users. Is it possible to do Identity Federation (SAML 2.0 or WS-Fed) with HCM Cloud service ? What are the prerequisites ? Do I have to implement OAM on my side ?
    I accept all pieces of information you can give me on this topic to help me understand the funcitonalites, limits and options offered by Oracle Cloud and more precisely by HCM Cloud service.
    Best regards,

    OIDDAS has limited capability of access control and information hiding. Presently, the permissions and privileges can be set at a realm level, and fine grained access control / information hiding cannot be done.
    At present, the only way to restrict view and access control is by appplying ACLs (which is not the safest bet).

  • After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager  and zapping the PRAM have failed to permit startup. What else can I try?

    After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager  and zapping the PRAM have failed to permit startup. What else can I try?

    Startup – Black screen with cursor
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Difference between Identity Manager and Access Manager

    hi,
    Can any body tell me the difference between Identity manager and Access Manager.
    thanks in advance
    regards
    dhawanmayur

    Access Manager is for access control (web authentication, authorization), Identity Manager is for identity (userid,profile,role, password etc) provision/management across multi resources (such as unix, active directory, peoplesoft, SAP) etc.

  • Any time I try to down   download something from torrents an add fro MacKeeper pops up. It then doesn't let me complete the installation. so I have neither MacKeeper nor anything from Torrents. How do I stop the MacKeeper ad from popping up?

    Any time I try to down load something from Torrents an ad for MacKeeper pops up. It then doesn't let me down load it to my computer so I have neither MacKeeper nor anything from Torrents. It will not let me access the the client Transmission. How do I stop it from popping up and blocking my access to torrents?
    Thank you.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My playlists will neither shuffle nor go from one to the next.  Instead it repeats the same song over

    My playsists will neither shuffle nor go from one song to the next.  Instead it replays the song selected.  Can this be fixed?  I have already rebooted the phone and it didn't change.

    In the Music app, after you select a playlist ans start playing a ong, note that on either side of the progress bar are arrow-like symbols. These control shuffle and repeat modes. Click on the one that has the arrows arranged in an oval. If it is blue, it's on; white means off.

  • Presentation Director and Access Connections when Docking

    When I dock my machine, it automatically selects the right presentation mode because of the way that I configured Presentation Director.  It would be nice if it could automatically select the right Access Connection too.  Is this possible?  Is there a way to select docking actions like there is a way to select eject options?

    Hi,
    in case you update Access Connection, you must already have also following updates installed:
    - Power Management driver
    - Power Manager
    -Hotkey utility
    - System interface driver
    - Wifi driver <for AC 5.x it must be 13.x version>
    <all of course with the latest version>
    Once this all is installed, you can install AC .
    Let me know, if you have also the latest version of the above driver/updates on the system prior to the installation of AC .In case not, just remove AC, install the above mentioned updates and then install AC 5.x
    Chers

  • I have searched for solutions to the error 13019, but everyone with the problem doe'st manually manage their music like I do. I really don't want to have to sync and gothrough that mess. Help? solution for manually managing videos and music!!

    I have searched for solutions to the error 13019, but everyone with the problem doesn't manually manage their music like I do. I really don't want to have to sync and go through that mess. Please Help! solution for manually managing videos and music!!

    - Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
    Apple Retail Store - Genius Bar                          
    you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

  • Location Switching and Access Connections 5.62

    Under Location Switching, I enable the "Include Ethernet connections..." option.  I then see my profiles for LAN connections at the bottom of the list and I can checkmark them.  I can't however select them and change the order in the list.  Is there a reason for this?

    Hi,
    in your situation, could you please make sure, that following Windows Services are started:
    - Windows Zero Configuration
    - Windows Presentation Foundation
    - Terminal Services
    There are the services, that are fully needed for the correct workflow of Access Connection.
    Also please make sure, that you are using the latest version of following apps/drivers, which are also needed for AC to work correctly:
    - Power Manager
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70602
    - Power Management driver
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
    - Hotkey features
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74261
    - .NET 2.0 + SP2
    Can you also tell me which exact  AC service is taking the most CPU ?
    Cheers

  • Windows 7 RTM x64 Power Manager and switchable graphics not working

    Installed Windows 7 RTM x64 on my T400. After windows update and installing Lenovo's drivers, everything is accounted for. ATI graphics works fine, and I can see the Intel graphics on the shortcut menu. I just cannot manually switch to the built-in graphics, nor did I see the Power Manager. What do I need to do? I have installed the drivers for the power management, even though on the list of driver on lenovo's webpage it says it's only for SL models.
    Help would be appreciated.
    Specs:
    T400
    LED
    ATI/Intel switchable graphics
    4Gb

    Have you installed the Power manager http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#powm ?
    And after that, make sure you have installed the right driver (the one for switchable graphics): http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#m8xswitch
    Hope that helps.
    I also have Windows 7 Professional x64 on my T400 and everything works fine (i only uses programs and driver from here: http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html
    T400 2767-AG8
    Windows 7 Professional 64bit

  • Xfce4-power-manager and laptop-mode-tools + backlight problems.

    Cross posted from here: https://bbs.archlinux.org/viewtopic.php?id=127992
    I don't know which forum it belongs to, so maybe a mod can close the one in the wrong forum.
    Out of curiosity, do these two tools conflict with each other? There seems to be some features that do the same thing, ie harddrive spin down time, but I'm not sure if these two will try to kill each other trying to configure the same power settings. If they do conflict, how could I go about disabling the conflicting parts (on either)? laptop-mode-tools claims it needs acpid "for ACPI support", however, acpid seems to be grabbing the standby event and throwing the laptop in standby despite the standby button bound to do nothing in xfce-power-manager. If I take out acpid, does that mean laptop-mode will no longer detect acpi events such as connecting/disconnecting AC power and thus not change modes when its plugged in?
    Another problem I've had after installing xfce4-power-manager is that when I use the brightness hotkeys the backlight gets stuck and starts flashing, locking up the system until I force shutdown. However, I can use the brightness plugin without trouble at all. What's causing the power manager to screw up setting the brightness since it clearly seems to work otherwise.

    It is easier to close this one and move the other thread over here. Just continue there.
    BTW better use the Report button when you want to have a thread of yours moved to another forum. That way it is guaranteed a mod will see this in time. And you never need to cross post.

  • Wireless is missing from Fn+F5 and Access Connections

    Hi,
    I just installed a new harddrive on my T60 and restored WinXP from recovery DVD, everything seems to be work fine, I have upgrade Windows to SP3 plus all hotfixes, and updated ThinkVantage software to latest version using System Update 3. Today when I try to use WLAN I found a problem, there's no way to add a WLAN profile in Access Connections, I can choose Intel PRO/Wireless 3945ABG when creating new profile in AC, but after I clicked Next, I couldn't find any wireless SSID even though there is one active. The #3 dropdown (wireless mode) is also empty, the security property button is also grayed out, so I cann't proceed further.
    I thought this may be becuase wireless is turned off somehow, so I used Fn+F5, to my surprise there's no wireless in it! It only has Bluetooth. I do have Wireless Network Connection 2 in Windows' Network Connections, it's listed as Not connected, the hardware manager also shows the wireless NIC without any problem, so I think WIndows does recognize the wireless NIC, but for some reason Thinkvantage refuses to recognize it, any ideas?
    Thanks
    Jim
    Message Edited by su27k on 01-24-2009 07:40 AM
    Solved!
    Go to Solution.

    I solved my problem by uninstall and reinstall WLAN driver and AC (maybe other related drivers, don't quite remember). The sequence of uninstall/install is important, I think you need to uninstall AC first, and install it last.

Maybe you are looking for