Power Manager for Windows Vista - ThinkPad

 The link show the update is for a T61p, running Vist, 
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
But once the download is done, the system refuses to install the  v2.50 - why is that ?
The pc is aT61p, vista Ult., with PMgt 2.3.

Hi Ran,
Thanks!
I haven't tried it yet.
In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
over and over I decide to revert back to the old Intel wireless driver listed on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
I tested it again........ IT WORKS!!!
Please try this combination:
BIOS Version: 1.15
Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41a
ThinkVantage Access Connections for Windows Vista Version 5.12 !!
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
Regards,
Ritchy
Message Edited by Ritchy on 01-14-2009 11:56 PM

Similar Messages

  • Power Manager for Windows Vista - MIGR 67216 - Power Manager Utility for Vista

    I have been trying to install the Power Manager Utility for Windows Vista (MIGR 67216) hoping that this will solve my Power Manager error.  The Power Manager shuts down automatically whenever I start the computer or try to access the Power Manager.  Dow anyone have a solution?

     I have had the same issue, this is the work around that cleared it on the t61p
    a) downloaded TVT SU 3.14 exe package from Lenovo web site
     - http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel​...
     - the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-72758
    b) un installed  power management
    c) un installed TVT SU and cleared directory under  http://forums.lenovo.com/lnv/board/message?message​.uid=135306
    d) installed the TVT SU package
    e) launched the TVT SU and it downloaded TVT PM and other stuff

  • Power Manager for Windows 8.1

    Where is Power Manager for Windows 8.1?  (For ThinkPad Edge series laptops)
    There is a "Lenovo Power Management Driver", but no application/software to go along with it.
    Does anyone know?

    Good day and welcome to the community.
    Please see: http://forums.lenovo.com/t5/Windows-8-and-8-1/ThinkPad-software-for-Windows-8/td-p/899865
    There is no official support for ThinkVantage Power Manager beyond Windows 7.
    There are reports that some have installed it, but there are warnings that it may(?) clash with Windows 8/8.1 native power management functions and potentially cause system instability.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad

    Hello
    i want to ask a Question , why Lenovo Still did not make
    (Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad ) ??!!!
    i look at the Drivers PageAnd i only found this : For windows VISTA and XP :
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70946
    BUT , Where is WINDOWS 7 VERSION ????!!!!!!!!, What are they doing all this time ??? 
    is this the Support which Lenoveo Give to there Customers? , i hope not .
    I am asking lenovo to give me as  a Customers , the software i need as fast as possible .
    Greeting,
    Al-allan Alaa
    Solved!
    Go to Solution.

    Try this URL:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT037696#broadband
    -gan

  • Battery gauge error running Power Manager for Windows XP version 5.20

    Last week on my R61 (8932-CTO),  Update Retriever and System Update requested that I download and install ThinkPad Power Manager for Windows XP version 5.20. After rebooting, I immediately received an error box with the following message: 
    An exception occurred while trying to run"C:\Progra~1\ThinkPad\UTILIT~1\PWRMGRTR.DLL,PwrMgrBkGndMonitor"
    As a result of this error, the battery gauge no longer displays correctly. The space where it used to be is blank, but clicking the empty space still gives you the option of starting Power Manager.
    What is puzzling about this is that version 5.20 is not available in either in the Driver Matrix, nor on the Downloads and Drivers web page. The version of the software that is presented there is version 5.13.
    The driver for ThinkPad Power Manager for Windows XP - version 5.20 can be downloaded from:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.txt
    Another interesting point, is that this version of the driver has, as yet, not been presented to me on my R500 (2714CTO), although both machine types are listed as supported models.
    Why are Update Retriever and System Update downloading software that apparently has not been officially released yet?  Why is this only happening on my R61 and not on my R500?
    And last of all, why has his software been released when it seems to have an obvious problem? 
    Any explanations would be appreciated.
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

    I just wanted to confirm that the last working version for Windows XP is version 5.05 revision 04.
    It can be downloaded from Lenovo:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.txt
    Cheers!

  • Power Manager for Windows 8

    Hey,
    Any news on release date for the power mangager for windows 8? I hate charghing my battery to 100% i'm trying to extend my battery life but it's impossible without the power manager ! 
    W520 427637u
    Solved!
    Go to Solution.

    Good day...
    You may wish to read thru the fairly lengthy thread here:
    http://forums.lenovo.com/t5/Windows-8/ThinkPad-software-for-Windows-8/td-p/899865
    For information on Power Manager and other ThankVantage tools under Windows 8.
    Hope this helps to clarify.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Thinkpad x240 Power manager for Windows 8 and 8.1

    Why is there a power manager program for Thinkpad x240 for Windows 8?

    rephase .. missing KEY word .. Why is there NO power manager program for the Thinkpad x240 on Windows 8?   There is one for Win 7.
    Great program, when I was on win 7 I used it all the time.

  • Edge E540: Power Manager for Windows 8.1?

    The Thinkpad Edge E540 currently comes with Windows 7 preinstalled, Windows 8 added as recovery disk. It is also suffering from an issue, where the fan will spin unnecessarily fast until going to standby and waking up again.
    As a solution it was suggested to use the Power Manager utility [1]. However, the download page [2] lists the Power Manager only for Windows 7 (and indeed it won't install on Windows 8.1). 
    Does this mean that the Power Manager is not available for Windows 8? If  it isn't, will it be?  
    [1] http://support.lenovo.com/gb/en/products/laptops-a​nd-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5​...
    [2] http://support.lenovo.com/de/de/products/laptops-a​nd-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5​...

    Hello Klaus1,
    please take a look at this thread, where I postet alsmost the same question yesterday (Message 31) and my conclusion just minutes ago (Message 34).
    http://forums.lenovo.com/t5/ThinkPad-Edge-S-series​/E540-Fan-does-not-stop/m-p/1840680/highlight/fals​...
    Greetings,
    LenU

  • Lenovo power manager for windows 8 - installation freezes

    I installed Lenovo Power Management Driver (file: 7xua14ww.exe) and I would like to install also Power Manager utility  (file: 7xua14ww.exe) but I always get this message:
    "A more recent version of the program has been detected in the destination you have selected. If you continue, your previous installation will be overwritten. Do you want to continue?"
    When I press yes installation bar opens but does not move and installation freezes.
    Can somebody help me? Thanks a lot.
    P.S.. I´m using Thinkpad E530 with Windows 8 Home (64)
    Solved!
    Go to Solution.

    Why do you want to install that on your ThinkPad?  It's for ThinkCentre desktop computers, not ThinkPad laptops.
    I have Power Manager running fine on my X220, as I mentioned above.
    jason404 - X220 (my sixth ThinkPad)

  • Photo and Contact manager for Windows Vista

    I have a Mac but, was helping some people I know set up their iPod Classic and was wondering what Photo and Contact manager on a PC is used to sync to Windows Vista.
    Thanks,
    Barry

     I have had the same issue, this is the work around that cleared it on the t61p
    a) downloaded TVT SU 3.14 exe package from Lenovo web site
     - http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel​...
     - the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-72758
    b) un installed  power management
    c) un installed TVT SU and cleared directory under  http://forums.lenovo.com/lnv/board/message?message​.uid=135306
    d) installed the TVT SU package
    e) launched the TVT SU and it downloaded TVT PM and other stuff

  • Thinkpad T540p Battery Manager for Windows 8.1

    Hi, I recently bought a Thinkpad 540p and wanted to know a way for stopping the battery from getting charged after a certain level. Its a very common feature to stop a battery from charging say after 80% and run on AC power supply direclty.
    Other lenovo laptops do support it, under various apps like Energy Manager, or Power Manager but I am not able to find any such options/app on my laptop?
    Thanks,
    Shashank
    Solved!
    Go to Solution.

    This is almost the correct solution but there are minor things that should be done before fully using Lenovo Power Manager.
    As you said, begin by installing power manager in Windows 7 compatibility mode. But then make sure that the following executable
    C:\Program Files (x86)\ThinkPad\Utilities\PWMOSDV.exe
    is added to the startup, so that its automatically started when system reboots.
    Also open services.msc and change the setting of Lenovo Power Service to automatic.

  • Problem mit ThinkPad Power Manager Desktop Windows 8.1 Thinkpad W530

    Hallo Zusammen
    Ich habe auf meinem W530 Windows 8.1 installiert.
    Ich habe von der Lenovo Website folgendes Tool heruntergeladen und installiert "ThinkPad Power Manager Desktop Windows 8.1". Das hat alles soweit geklappt.
    Nun wollte ich die Einstellungen ändern, es zeigt mir aber nur den Netztbetrieb an ich kann keine Einstellungen ändern für dne Akkubetrieb (Siehe Bild)
    Hat jemand eine Ahnung wie ich die Einstellungen für den Akkubetrieb ändern kann.
    Ich bin fast am verzweifeln, denn der Energie-Manager von Windows ist absoluter schrott, der Akku ist ständig leer.
    Besten Dank
    Chrigge
    Gelöst!
    Gehe zu Lösung.

    Dank für deine Antwort.
    IntecBerlin schrieb:
    Klick mal oben auf Wechseln zu Allgemein da hast du glaub ich eine bessere Ansicht und ganz regeln "Hohe Leistung" oder "Lange Akkulebensdauer. etc..
    Ich habe es ausprobiert, aber es ändert sich garnichts an den Einstellungen, weder wird die Bildschirmhelligkeit verringert noch hält der Akku wirklich länger.
    Ich habe das Gefühl, dass die Windows einstellungen den Powermanager von Lenovo übersteuern.
    IntecBerlin schrieb:
    Ansonsten wenn du denn Akku länger halten willst unten auf Maximale Energiesparung klicken.
    Dieses Vorgehen ist für mich nicht so praktikabel, denn ich möchte die Einstellungen lieber einzeln vornehmen, um die Akkulebensdauer und Performance an meine Bedürfnisse anzupassen.
    Gruss
    Chrigge

  • W530 Power Manager for Win 7 x64

    I just installed Power Manager for Win 7 x64 Version 6.64.4 on my new W530 and tried to set Battery Maintenance and there is no button to do so on the battery page.  Why isn't it there and what can I do to get it back?  I mostly use AC and want to maximize battery life.  
    Solved!
    Go to Solution.

    I think you might have to click "Advanced" on the main screen to get the battery maintenence option to appear.
    W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
    Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • Hp Officejet x32 /software for Windows Vista

    I have an Officejet 6210 All-in-One.  My computer (2009) came loaded with both Windows XP Professional and VostaBusiness (32 bit).   I only used the XP Prof, until support ended, then switched to Vista.  Disk that came with my printer does not include Vista, and I no longer have access to HP Director or Image Zone.  O can still print and copy, but scanning is impossible.  How can I get the proper software to use with Vista?
    WRLM

    Hi there @WRLM , welcome to the forums!
    You would need to download and install the Full Feature driver for Windows Vista, in order to scan.
    Here is the driver you will need: HP Full Feature Software and Drivers
    I hope that helps, have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Send smartform as pdf attachment through Email on ECC 5.0

    I have been trying hard to do this, but am not able to send attachment. Below are the problems - 1. If sometimes the mail goes, the attachment is empty. 2. if i use COMMIT_WORK = 'X' in FM SO_NEW_DOCUMENT_ATT_SEND_API1 , it throws a dump - ' Invalid

  • How to enqueue a PIP from InterConnect to B2B IP_OUT_QUEUE??

    Hi all, i'm trying to enqueue an 3A4 PIP to B2B IP_OUT_QUEUE using InterConnect AQAdapter. the scenario is like this: our own developed application will enqueue an xml into PO_QUEUE and then do an simple transformation in InterConnect then only enque

  • Can i follow an object?

    hi all, i would like to find a way to follow an object through all the methods it is passed as a parameter. for example if i have this: public static void method() Object o = new Object(); methodA(o, "another parameter"); methodB("another_parameter",

  • FAQ: Is the Photoshop CS6 beta feature set complete?

    By definition, a beta is not the final build of a product. Feature suggestions gathered during the public beta may influence future releases of the software.

  • Translate Text

    Hi Gurus, Is there any <b>Function module</b> in SAP to tranlate the text. For eg. the logon language is Bulgarian & the text entered while posting a document is also in Bulgarian language & need to translate the same in English. Rgds, NK