Power manager problem under vista 64 bit

Happy to see Lenovo opened a forum and willing to hear from the customers.
Power manager has problems under Vista 64bit:
1. Sometimes it will cause explore.exe can't start when windows start.
2. If no window at max, the color of the battery icon will be very dim
Hope Lenovo can publish a new edition for vista 64 bit.

http://it.toolbox.com/blogs/achieving-great-bi/obiee-on-vista-64bit-with-iis-70-29882

Similar Messages

Can't start device-manager.exe under Vista

Can't start C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\bin\device-manager.exe under Vista 32. It works fine under Windows XP
error is java.net.BindException: Address already in use: JVM_Bind
I changed C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\toolkit-lib\modules\bootstrap\conf\system.properties
I tried
device-manager.object-registry.host: 127.0.0.1
device-manager.object-registry.port: 61309
no success
my C:\Windows\System32\drivers\etc\hosts consists
127.0.0.1 localhost
::1 localhost
error output is
[   2408] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-ConnMg
rBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Midle
tMgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Midlet
MgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Profi
lerBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Profil
erBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
ConnMgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-C
onnMgrBridgeFactory
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
MidletMgrBridgeFactory
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-M
idletMgrBridgeFactory
[   2410] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceAddre
ssManager
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceAddres
sManager
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceRegis
trationNotifier
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceRegist
rationNotifier
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on HttpServer
[   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on HttpServer
[   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on RapiClientS
ervice
[   2500] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.createServerSocket(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.run(Unknown Source)
[   2547] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
...

I am having the same problem here with Windows 7 64bit. Why are most of Oracle forum posts are left unanswered. Found many people having similar problems, but nobody seems to have the answer. Anybody, please help
Thank you in advance
Regards,
pra

Power Manager for Windows Vista - ThinkPad

The link show the update is for a T61p, running Vist,
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
But once the download is done, the system refuses to install the v2.50 - why is that ?
The pc is aT61p, vista Ult., with PMgt 2.3.

Hi Ran,
Thanks!
I haven't tried it yet.
In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
over and over I decide to revert back to the old Intel wireless driver listed on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
I tested it again........ IT WORKS!!!
Please try this combination:
BIOS Version: 1.15
Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41a
ThinkVantage Access Connections for Windows Vista Version 5.12 !!
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
Regards,
Ritchy
Message Edited by Ritchy on 01-14-2009 11:56 PM

Power management problems

A couple of weeks ago I installed quite a few of the patches in the recommended list.
Since then, I get the following message repeated continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the power.config file and in the startup scripts, but couldn't find any reference to "DPMSSet." Any ideas on the cause and solution of the message?
I never use the powerd daemon, so killing the process seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

KT4 Ultra APCI power management problems

After I boot I must go into Win98 power management propertys and apply to get any power management functions to work. And then all I can get is monitor blank and hardrive power down. Unit will not go into suspend.
If I use the suspend feature in power down the unit will go into suspend (Susp to ram) but all the fans keep running. When I come out of suspend, the system becomes unstable and quirky.
Can anyone help me get this running the way it should.
Joel Gunn
Kt4 Ultra V 1.0 Bios V 1.4 - AMD 2100 XP
Win98 Se
Nanya 256M - 333 Ram X2
Ati Radeon 7500 AIW
Enemax EG 365P -VE
Two Maxtor 80Gig Ata 133, 7200 on a Promise TX2 Ultra 133 controller.
Aopen Modem
CD rom and CDR/RW

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

X61 Vista power manager problem

I have just reinstall my vista (japanese version) and change it into english with MUI (multilanguage user interfae).
Then I realize that my power manager didn`t show my battery details.
could anyone help me?
regards n thx

When I open Power manger, It apears that power managger has stopped working and I have to close the program. here is the details for it:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: pwmui.exe
Problem Signature 02: 1.0.0.0
Problem Signature 03: 4aa725eb
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 4a275af7
Problem Signature 07: f50
Problem Signature 08: 7
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Power Manager Problems

Since purchase my T61p 6459-CTO has run at about 50 C under normal load, measured by TPFanControl. A few weeks ago I noticed my idle temperature was at 62 C. In hunting around I discovered that my power scheme (Energy Star) had been lost and the selection window in the applet was blank. I selected Energy Star, clicked apply, and within minutes the temperature was back down to 50.
This morning I was back at 62. When I double clicked on the green tray icon, the applet window was blank again, but I was unable to select a scheme because none were there, I pressed the blue ThinkVantage Button and tried to get to Power Management from the productivity center. I got a message saying "You are not authorized to display the panel for selecting a power scheme". Yikes!
Reinstalling Power Management didn't help, so I Googled the error message, and amazingly enough, I was not alone. Another ThinkPad user, with a T60 had the same problem. If you open your registry and go to HotKey_Current_User\Control Panel\PowerPolicies there is a list of power schemes. Evidently, when the list grows too long, the applet fail. Deleting the majority of the schemes solves the problem. See
http://chris.brandlehner.at/Brandlehner/cab_blog.nsf/d6plinks/CBRR-6YWBNV for a more detailed explanation.
But...my problem isn't completely fixed. I have the Max Performance, Max Battery Life, Presentation, Video Playback and Power Source Optimized schemes, but I've lost Energy Star. Frankly, I don't know what to do next.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask
Solved!
Go to Solution.

The Vista package at that web address should work for Win7 also.
(http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=engy-star40#power-pl...)

Power management problem in MacBook 13 firmware?

After installing the Tiger 10.4.7 update, I have seen various problems with powering up my MacBook. Once powered up, I don't have any visible problems. Only after powering down, the problem arises.
When I go to start the MacBook, the screen goes all gray, then it looks as though the LCD update stops. The screen slowly fades to colored vertical lines, then goes white as if the clocks to the LCD module have stopped, or at the wrong speed.
The solution that I have found to overcome this is to clear the PRAM (ALT-CMD P R) and to then hold the power button until the white led blinks fast. I get a long tone from the speaker, then the machine boots normally.
I suspect that something in the new 10.4.7 update is causing the PRAM / Power management system to become corrupt. Any thoughts?
Thank you.
John

Thanks for the reply. I don't consider the LCD lines a problem in themseleves. There is something that changed when the 10.4.7 update was installed that has caused an issue with the startup.
Just to be clear, I had backed up, repaired permissions, checked my HD media, and followed Apple's recommended action before installing the update (as with all other updates).
My educated guess, having designed hardware and firmware for a number of years, is that something is corrupting the PRAM or other startup prior to getting to the HD. Until we start looking into the underlying problem with the update itself, the problem will continue.
It is important to make sure that there are no underlying problems with the system before installing an update. However, in this case, it is clear that there is something wrong with the update / update process with 10.4.7.

Power Manager for Windows Vista - MIGR 67216 - Power Manager Utility for Vista

I have been trying to install the Power Manager Utility for Windows Vista (MIGR 67216) hoping that this will solve my Power Manager error. The Power Manager shuts down automatically whenever I start the computer or try to access the Power Manager. Dow anyone have a solution?

I have had the same issue, this is the work around that cleared it on the t61p
a) downloaded TVT SU 3.14 exe package from Lenovo web site
- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel...
- the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758
b) un installed power management
c) un installed TVT SU and cleared directory under http://forums.lenovo.com/lnv/board/message?message.uid=135306
d) installed the TVT SU package
e) launched the TVT SU and it downloaded TVT PM and other stuff

Lenovo power manager problem

Hello everyone,
I am experiencing a very annoying problem with my W520 with the Quadro 1000M and windows 8:
When I plug in my laptop, my fps totally gets cut off. When I unplug the charger, the fps gets back to normal.
It seems to be happening after I updated the power manager to the latest version 1.66.00.22.
This happens when playing League of Legends.
I tried updating the nvidea driver but no difference.
Any tips or links to previous versions of the power manager ?

try to install power management on safe mode. ( make sure you un-install first )
by the way, have you performed clean windows installation or upgrade?
you can re-download power management from here or try to use vista drivers

Power management problem on S540 still update of april, 18 2015

Hi, since last driver update (power management driver) , my S540 go on sleep very often and aleatory While I'm working on... Someone have the same trouble ?
I tried to restore earlier the system, update the driver etc.... always the same problem.
It's impossible to work with my s540...
Francis

LennyL wrote:
Hi,
everybody suggests "hdparm -B 254 /dev/sdxxxx". This does NOT work. At all. The Load Cycle Count keeps going up. The 2nd HDD (in the CD/hdd caddy) powers down every few seconds, then up again.
I found this works: "hdparm -S 25 /dev/sdxxxxx" (change sdXXX in sda, sdb, or whatever relevant to your case). It sets spindown every 25*5 seconds. Second hdd is practically always on and LoadCycleCount remains constant.
I am also using "hdparam -S 0" to disable drive power management entirely.
LennyL wrote:
Please Please can you check something for me?
I have two hard drives (second is in aftermarket caddy), but it seems the second hd (the one in the caddy) is NOT seen by BIOS at boot. So I can only boot from the internal hdd. After booting, the second hdd is seen by Linux, SATA link reports 3Gb, no issues, all is fine.
Same here, the secondary hard drive is not seen in BIOS or in the BIOS boot menu.
After booting Windows/Linux, the drive works fine.
UPDATE: Even in good ol' DOS, the drive is seen. (I just booted DOS for a firmware update of an SSD drive, which was installed in the hard drive caddy.)
Where did you get the BIOS v1.32? The latest on the Lenovo Website and in System Update is 1.20..
Can you verify something for me too?
On my L520, Turbo Mode does not work at all, how about yours?
You can verify under Windows using hwinfo (http://www.hwinfo.com/ ).
For Linux, there's http://code.google.com/p/i7z/ , but you'll have to compile it.
Best regards,
schalli

T61P XP/SP3 - Power Manager Problems, Can't save schemes, limited schemes available

Hi All - When I got this -rockin'- laptop originally I could set my own power schemes without problem. Now it won't save my new powerschemes. I try to create one, finish the last step, and then the power scheme isn't in the dropdown. I read somewhere on the Web that this may be related to SP3.
Also, the only Power Schemes I have access to are Video Playback and Maximum Performance. I have tried uninstalling Power Manager and the associated DLL and then reinstalling, but that didn't help. Also, I see no reference to this problem in troubleshooting. Thanks in advance. This is getting really annoying as I like to use as little power as possible since I use teh computer on battery power quite often.
Thanks! g-
Solved!
Go to Solution.

First, don't mark an item solved if it's not solved. Second, learn to search to see if others have had this problem. instead of repeating a post that's been beaten to death. Hint: Lots of us have had the problem .
If you had searched you would have found this link: http://chris.brandlehner.at/Brandlehner/cab_blog.nsf/d6plinks/CBRR-6YWBNV where you will see a possible solution. If it works, you can mark the entry "solved". Good luck.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask

Lenovo G510 Power Management Probleme

Hey Guys i have a really anoying probleme with my new Lenovo Laptop. When i put the charger in, it runs slower than o battery. For example if i want to play a game and want to plugg it in so that it wont use the battery my performance is affected. I do not have eny power manager drivers instaled except the usual Windows power manager. I had one instaled but was pretty much useless and i've deleted it. Please help, i dont know what to do and its very anoying.

Hi Albulescu,
As you have performed the exact steps with the Power Plan for Maximized performance of the computer with or without AC Adapter connected, the only available option is to re-install the Intel Chipset driver for the computer and if the issue persists. I would strongly suggest you to contact our Technical Support for further Assistance also to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo 3000N200/0769/B5G - Power Management Problem

I have recently downgraded the Operating System on my Laptopto to Windows XP Pro with reasonable success. However, there is one problem. I can go into Standby and Hibernate mode all right, though it takes a good 60 secs to do so, but I cannot wake the computer by shaking the mouse or punching any key on the keyboard. I should clarify that my laptop is connected to an external monitor and keyboard, and hence the reference to shaking the mouse. I find that the only way to recover from Standby or Hibernate modes is to power off and power on again by pressing the power button on the laptop, which partly defeats the purpose of using these modes. I have installed the correct latest BIOS and also Power Management and video drivers for XP. I notice that a few other members of this forum also are having PM problems but have not come across anyone having exactly the same problem as above, namely, can hibernate/standby but cannot wake the pc. Any help will be appreciated.

Check your BIOS for options "wake on mouse", "wake on keyboard" - this helps returning after wait mode.
After hibernating you only can start by pressing "ON" button (Power Button).
Hibernation takes long because of fragmented HDD.
To increase speed do following:
1)RightCkick on desktop->Options->Screensaver->Power Mangement. On one of tabs there's an "enable hibernation" checkbox. Uncheck it.
2)Defrag your "C:" drive.
3)Mark that first-step checkbox again.
4) PROFIT
//help will save the world

Power management problem with USB modem

I now use a MS-6743 (i865G) board. My previous board was MS-6533, it did not have USB v2.0.
The problem is my Aztech (originally Smartlink) USB modem prevents the system going into standby mode but this should be a USB 2.0 issue because I'm using the same driver for the modem like previous mainboard config. I could go into standby mode flawlessly with my old board.
Furthermore I'm using USB keyboard, mouse but no power management property dialog box appear for those devices. So I'm pretty sure the problem is because of USB 2.0. Is there a way to come around this issue? Thanks in advance...

To pin point whether or not IRQs conflicts is to be blamed, please kindly post your IRQs conflicts for us to verify.
A signature of your system setup will proves greater help for others to advice you with more accurate directions and benefits you in the future.
Please read this Moan Guide too.

Power manager problem under vista 64 bit

Similar Messages

Maybe you are looking for