Power Map doesn't display in ribbon

I installed Power Maps Preview and the add-in is active, but it doesn't display in the ribbon. I unistalled the program several times and re-downloaded it, but it still does not work. Many of the discussion threads on this topic contain dead links for fixes
or don't provide much information. How have others solved this issue? I have Home Office 2013. Thanks!

That's a strange one. Run Thinkvantage System Update, or just download and install most recent PM driver and software. Maybe refreshing these will give you PM back. Otherwise, I believe you may also have a setting in the BIOS for the beep. Not in front of my X100 now, but I know I have this setting on my X60s.

Similar Messages

Map doesn't display in PS Elements 12 organizer

I'm trying to add places to photos, and the map doesn't display in the organizer. It's just a blank white page. I can't add any locations. All other connectivity is fine. Program just auto updated today.
Any help is appreciated.

No, they've moved to the bottom of the Enhance menu, for one of those mysterious adobe reasons.

Why my power map doesn't work and the button of power map is grey

After I finish installing my power map plung-in for excel， I find that this plung-in can‘t work and the button is grey.Anyone
meet similar problems could help me?

hi, Anita
I just want to say that the key problem is "the button is grey".
I have tried all your solutions, but none of them worked.
And with my regret, I have to say that power map is listed in both "COM Add ins"
and "Excel Add ins", but still, the button is grey .

Google maps doesn't display

hi,
just a little problem with my brand new macbook: google maps doesn't work. the maps never appear on the screen.
thanks for help.

I had this issue for SO LONG. Turns out that it was a router issue; SPI Firewall specifically.
I have a Netgear router, and had to disable SPI Firewall in order for Google Maps to work.
The issue was that the maps would load, but the tiles would fail to redraw as I zoomed in or out. Safari or Firefox or Camino had same issue, and all are fixed now.
Now I can zoom in and out, and the Google Maps pages redraw instantly!
Look up SPI Firewall to learn more. I'm advised that if I have the Mac Firewall set up, then the router Firewall can be safely disabled. (I have only a small network of three Macs at home here.)
Message was edited by: Kenneth Feldman

R61 power manager doesn't display power schemes nor allow me to change them

Power manager installed on my computer does not allow me to change the power schemes nor does it even display preinstalled power schemes. I assume it is currently using the default power scheme. I do not have a password for windows nor for client security solution software. So i thought that is not why it is preventing me from access.
I am using windows xp sp2 , have installed the latest bios for windows xp, but not sure whether the think vantage technologies are the latest .
help is much appreciated.

Hello memman, welcome to Lenovo forums!
Please tell us your machine type, used OS and powermanager version.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

InfoPath Developer tool bar is checked in options but doesn't display on ribbon

Does anyone know how I can get my 2010 InfoPath Developer tab to display? It's checked to be active in Options, but refuses to show.
Many thanks!
Julie

You must go to File > Options > Customize Ribbon. Then check the developer section.
If that does not show, are you customizing a list? If that's the case, then the Developer tab will never show because you can't add code behind these forms.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Power manager doesn't display - so I can't get rid of the power change beep...

Hi everybody,
I just got the X200 laptop, like it very much except for the annoyingly loud beep when the system goes into stand-by. Looking trough this forum I tried many things, like changing the sound settings in regedit to 'no' and disabling the 'beep' plugin in the system settings. No luck so far. An other solution (that sounds useful) is disabling the 'beep on power changes' option in the Power Manager. But...when I open the Power Manager, it displays the welcome/info screen and then disappears! How can I get into the Power Manager??
Hope someone can help...
Cheers,
Hanneke

That's a strange one. Run Thinkvantage System Update, or just download and install most recent PM driver and software. Maybe refreshing these will give you PM back. Otherwise, I believe you may also have a setting in the BIOS for the beep. Not in front of my X100 now, but I know I have this setting on my X60s.

Maps doesn't display roads

When I start maps.app I get the traditional road map which vanishes after approximately five seconds leaving behind a beige screen. If I select satellite or hybid view it displays properly.
This happens on both my MacBook Air and my MacBook Pro 17"
Ideas?

Tried the SafeMode approach - Maps simply quit in SM whenever I did anything. However, when restatring normally afterwards it seems to be working. And I have "British English" as my language, not the default (presumably US) English.
However, it seems a bit out on my address - perhaps that's because my house is only 1 year old and may not yet show on Apple's map database.
And how does Maps know my "Current Location", and how can I edit it? Right now it's at an address one street over and I want to correct it.
Thanks.

Power Map is not shown in the Ribbon

I have seen similar questions before, but many updates has happened for Power Map from last year when that question was asked. So sure if it is still the same situation.
https://social.technet.microsoft.com/Forums/en-US/2480e2d8-a75d-4a80-a8d6-71cf5be97bf4/power-map-addin-enabled-but-no-ribbon-shortcut?forum=powermap
Basically, I installed Microsoft Office 2013 Professional Plus, I enabled Power Pivot, Power View and Power Map, all of them are shown as active under "Excel Options" after you open "File"-"Options"-"Add-Ins". But
only Power Pivot and Power View is shown in the Ribbon. Power Map is supposed to show under "Insert"-"Tours", just next to "Power View"(Please see example). It is NOT there.
http://office.microsoft.com/en-001/excel-help/i-don-t-see-the-power-map-button-in-excel-HA104091292.aspx?CTT=5&origin=HA104091224
I tried uninstall Office and Install it again. I also checked that it is the most recent version (as now 15.0.4659.1001), I checked LoadBehavior in Registry Editor, the value is 3. But I do find that for Power Pivot and Power View,
there are four values((Default), Description, FriendlyName, LoadBehavior), for Power Map, there are only two ((Default), LoadBehavior). However I tried to create (Description, FriendlyName) for Power Map in Registry Editor, it's still not working. I later
tried to use repair office from "Control Pannel"-"Programs and Features" it's still not working.
I might be Rookie on Power Map and there might already be solutions widely known among profesionals. I really appreciate if professionals can help me to fix that. Considering I spend much more money just to get functions of Power Map addins.
if this is truely a bug in Map Power, I hope Microsoft would be awared of this.
Thank you

Hi,
Since you have Microsoft Office Professional Plus 2013 installed in your PC, you need download and use the Power Map Preview for Excel 2013 as an unsupported add-in.
http://www.microsoft.com/en-us/download/details.aspx?id=38395
A new preview version that replaces the earlier preview is available on the Download Center page. The earlier version of the Power Map Preview is expired, and won't work with any version of Excel. If you have the earlier version, uninstall it from Control
Panel, then download and install the current version of the Power Map Preview.
https://support.office.com/en-us/article/Power-Map-for-Excel-82d65bd7-70c9-48a3-8356-6b0e82472d74
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Power Map in Excel 2013 (Office 2013 Professional Plus) will not show up in ribbon

I have tried literally everything and nothing works.
I can download the preview version of the Powermap addin and it works.
But by default the add-in will not show up in the ribbon.
I uninstalled , reinstalled, re-ran SP1 of office 2013. double checked the load behaviour,
ran a repair.. nothing works.
Powerview displays fine, Bing Maps... just not Power Map

Hi Kenneth,
Since you are using Office 2013 Professional Plus, you can only use Power Map Preview for Excel 2013, which is an unsupported add-in. See:
https://support.office.com/en-in/article/Power-Map-for-Excel-82d65bd7-70c9-48a3-8356-6b0e82472d74
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Mapping canvas of the mapping editor doesn't display

I don't want to reinstall the OWB, I've tried on everything on the Design Center GUI, the mapping canvas has just being hiding somewhere seeing me tearing my hair. I will almost die. But all the pluggable mappings show their mapping canvas as they did.
I can't remember what I've done in the other day and so lose the mapping canvas, every mapping in the same module just doesn't display its canvas, all other windows (palette, explorer...) show normally.
I've tried creating a new project and creating a mapping in it. The mapping canvas still doesn't come to the display.
Is there any configuration file to set control over the mapping canvas as well as all other GUI elements?
Any direction, Thanks a million.
Oracle 10.2.0.1.0
OWB 10.2.0.1.0
Work Flow 2.6.4

I solved it.
It's in <owb_dir>\owb\bin\admin\MappingEditorLayout.xml.
I replaced
<SPLITTER orientation="0">
</SPLITTER>
with
<DOCKABLE tag="ROOT" width="714" height="660" min_width="50" min_height="16" pref_width="714" pref_height="660" collapsed="false"/>.
Of course, then relogin to the design center.
It works for me.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

Power map not displaying correctly

I have installed Power map for Excel 2013.
the map won't display correctly. It is displayed in squares. See example.
My PC meets the system requirements as described on your website.
Direct X is version 11.

For feature/support requests, can you send a Frown in the UI to the team?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

SSRS 2008 R2 Map doesn't render (won't display when you preview it)

I'm trying to create a map where it displays the count of people in my DB for each state. There are 126,000 records in the dataset. I've looked at a dozen videos and gone through step by step instructions to make sure I'm not missing something.
The map will never render when I preview it. It stays gray and no data displays. I can't for the life of me figure out what is wrong!! Can anyone point me in the right direction? I'm using the Map Gallery and doing a Color
Analytic map. I'm trying to display count(state) - but have also tried counting the id of the person. It's driving me nuts!

Hi Cfiller,
According to your description, you create a Color Analytic map using Map Gallery. When previewing the report, the map stays gray and no data displays.
In Reporting Services, a Color Analytic map must include the spatial data and the analytical data. In your scenario, since you design a Color Analytic map using Map Gallery, the spatial data is already embedded in reports located in the map gallery, then
you should add analytical data to the map. As you mentioned the analytical data for count of people comes from the database, you must specify match fields to relate the spatial data and the analytical data when designing the map. If there is no match fields
in the map, it’s expected that no data will display when previewing. So please check if you specify the match fields correctly.
Reference:
Maps (Report Builder and SSRS)
SSRS R2 Map Control Item Does Not Render in Preview
or when Deployed to Report Server
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Power Map filter option missing

I have an end user who is more of a power user in the company. They're using Power
Maps add-in for excel and are expecting this
filter option but its currently not displayed. I have run all MS updates after the add-in was installed as well as a restart to the system.
I have also found other articles about manually updating office but
those options aren't available in our version of office (pro plus x64 15.0.4675.1000). The registry keys are not even there.
I deployed our MS office via GPO startup script and MSI file.
Has anyone run into this or have even a hint as to what may be wrong?

Hi k4rizma858,
According to your description, you said"I deployed our MS office via GPO startup script and MSI file. ", it seems you’re using Microsoft Office 2013. I regret to tell you, Office 2013 doesn’t support the filter function of Power Map,
and Power Map is an unsupported add-in in Office 2013. Please read this content:
https://support.office.com/en-in/article/Power-Map-for-Excel-82d65bd7-70c9-48a3-8356-6b0e82472d74
Microsoft updates to Excel Power Map with two big features, Power Map Filtering and Custom Maps in September 2014, and the features of Power Map are only enhanced for Office 365. You can get these messages from these links:
http://blogs.office.com/2014/09/09/excel-power-map-september-update/
http://microsoft-news.com/microsoft-updates-excel-power-map-with-power-map-filtering-and-custom-maps/
Thus, if you really need to use the filter function of a map. You can use the Office 365 to fulfill your needs or you can try to use Bing Maps in Office 2013.
Hope it’s helpful.

Power Map doesn't display in ribbon

Similar Messages

Maybe you are looking for