Power Map not working properly

Hi all
I have worked sporadically with Power Map since the first GeoFlow non-public beta.
Now i have upgraded to the new bits, with both Power Query and Power Map, but my Power Map isn't functioning.
When i plot some data i can se a lot of grey Squares appearring, representing the locations, so the data is being geo coded correctly from Bing, but when i add a measure and expect to see the bars rising on the map, nothing happens.
I have tried on my primary laptop, on a completely newly installed Windows 8 with Office 365 ProPlus and on a newly installed Windows 8 with Office 2013 Professional Plus - all with same result.
I really need to have a working demo environment up and running, so any help would be appreciated.
BR David
Regards David

Hello again,
We recently released an updated Power Map
preview that now includes VM support. Give it a try!
That said, you mentioned that you're running Parallels and I haven't been able to find confirmation that current versions of Parallels officially support DirectX 10 (which is a system requirement for Power Map). I found a Parallels forum
post saying that Parallels Desktop 8 includes experimental support for DirectX 10 but the current Parallels Desktop 9 landing
page still references DirectX 9. Your mileage may vary. Good luck!
I hope this helps!
Blair Neumann (MSFT)

Similar Messages

Value mapping not working properly

Hi All,
I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
Value mapping 1 -
Context - http://sap.com/xi/XI
SenderParty- SenderSchema
ReceiverParty- ReceiverSchema
Value Mapping table in ID -
Value mapping at field 2 -
Context - http://sap.com/xi/XI
SenderParty1- SenderSchema1
ReceiverParty2- ReceiverSchema2
Value Mapping table in ID -
Source payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
   <Record>
      <Emp_ID>123</Emp_ID>
      <Name>rash</Name>
      <Surname>sumit</Surname>
      <Gender>Male</Gender>
     <Grade>E2</Grade>
</Record>
</ns0:MT_VM_Send>
Target Payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
<Record>
<Emp_ID>123</Emp_ID>
<Full_Name>rash sumit</Full_Name>
<Designation>E2</Designation>
<Gender>M</Gender>
<Travel_Mode>Train</Travel_Mode>
</Record>
</ns0:MT_VM_Receiver>
Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
Thanks & regards,
Rashmi Joshi

Hi Rashmi,
The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
regards,
Harish

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

"Maps" not working properly after 10.3.2.440 update.

I rec'd my 10.3.2.440 update Sunday night. Everything seems to be working except Maps. Maps will open, but I get a message on screen like, "Content Unavailable. My Places content is currently unavailable." The map opens, and finds my present position, but I can't search for addresses, stores, or anything else. If I manually type in an address, it may find it, but it won't calculate directions. Any help would be appreciated! D Wells

Hi there! @Dwells2009
Thanks for posting your concerns. I’m sorry to hear you’ve had issues with the Maps app.
I’d recommend trying a soft reset by pulling the battery from the phone for 2-3 minutes.
If this does not clear the issue, you will want to back up your data and factory reset the phone.
For steps to factory reset your phone, please go to http://www.att.com/devicehowto/ and select the make and model of your phone. Once you have done this, locate Troubleshooting in the left column and select the + symbol then click on Reset Device for full back up and reset instructions.
Hope this helps!
Charise

Google maps not working properly

Has anyone else noticed this recently. Google maps does not seem to (or incorrectly) locates the wrong addresses from my contacts. It worked fine a week ago. I have noticed on some of the contacts, google will change the address during the search or can't find the address, including my home address which it identified perfectly before. Is this a software issue with google, or an iphone issue? Also in the past when I used goog 411 (free directory), it would send a text with the phone number and a map link so that I could locate the place I got the phone number for. The link does not seem to find the location anymore on the map. I really liked this feature.

I'm glad someone asked this question!!! I'm dealing with the same crap...

Power button not working properly

My phone was bought a year back. It was a gift from my brother. Now my warranty has expired but im still under there extended 90 day warranty.My phne is an Iphone 5 nd im facing probs wid d power button.I hve d srl no, bt not d registrtn no.Wt do i do nw?
Help pls. I reside in India. Iv checked from www.selfsolve.apple.com for the details regarding my phone. Im really worried. Pls help

Holding the power button down regularly is likely to cause problems, then you will need it, so don't.
If you think there is a mechanical or electrical issue with your Mac the Apple Store is the right place, but please stop with the power button

In my MacBook Pro Maps app not working properly?.. any solution

Maps app not working properly?.. any solution

If i search any routes by clicking directions tab,the message shows like this " DIRECTIONS ARE NOT AVAILABLE A ROUTE TO THE DESTINATION FROM ITS NEAREST ROAD CANNOT BE DETERMINED"

Maps is not working properly anymore

I am using iPad2 with iOS6 and since a few days Maps is not working properly anymore

I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

IPAD 2 ,MY iPAD IS UPDATED, BUT MAP SOFTWARE IS NOT WORKING PROPERLY ,LOCATION/ROUTE

iPAD 2 ,MY iPAD IS UPDATED, BUT MAP SOFTWARE IS NOT WORKING PROPERLY ,LOCATION/ROUTE & DISTANCE ALSO...
CAN YOU GUIDE HOW TO SOLVE THIS PROBLEM....WAITING FOR SAME.
VIRAL THAKKER- INDIA.
ALSO, I HVE SOME PROBLEM IN MACBOOK SOFTWARE OPREATRING SYSTEM IS 10.6.1 AND TRY DOWNLOAD 10.6.8...BUT DON'T KNOW AFTER DOWNLOADING,I M NOT ABEL TO RUN IN MY MACHINE .
ANY BODY CAN GUIDE ME? TO SOLVE THIS PROBL.
VIRAL THAKKER INDIA

Try this: Open up her Home folder (house icon), click Library then Preferences. Locate com.apple.softwareupdate.plst (I don't have my Mac handy so I can't double-check the name; that should be correct) and move it to the desktop or trash, then try running Software Update again. Also try running Software Update while logged in as another administrator.
~Lyssa

Remote not working properly with Apple TV...sporadic fuctioning

Hello,
I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
Please let me know if any of you have ever experienced this problem and what your solution was, if any!
I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
HELP PLEASE!
Thank you,
Travis

The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all.

Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue? I have applied all Mac updates and still having problems with the trackpad.

The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
You can try doing a SMC reset however I don't think that is the solution.
SMC RESET
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.

My Mac App Store on my MacBook Pro does not work properly.

My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help

Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
Good luck

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

Windows 7 Brightness and Function key not Working Properly

i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it came with windows 8.1 preinstalled than i installed windows 7 ultimate.
i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

Power Map not working properly

Similar Messages

Maybe you are looking for