Power off during updated

During updated the ipod, the power of the adaptor is off when "Power adapter plugging into wall". Now there is nothing on the display. What can I do? Pls help.

Try to do a Reset on your iPod, redo the Restore, and make sure your AC charger is ready.

Similar Messages

HT201263 It Power off during it electricize ,Any way I can not Power on

It power off during it electricize ,Any way I can not power on

Did you try to connect in recovery mode?
iOS: Unable to update or restore
More tips here:
iOS: Not responding or does not turn on

My hp envy want quit saying " do not power down during update" powered down 3 times and still saying

My hp envy want quit saying " Do not power down during update" powered down 3 already still saying the same thing.

so my printer worked for a month and then it asked me if i wanted to install updates. It's been installing updates for three weeks and says not to turn off. I've turned it off several times and unplugged it a few times. No other buttons work on the screen because i can't get to them. Obviously it's a software problem but i can't find any updates to fix it. The guy on the help line said it's a hardware problem and that they'd offer me a $95 discount on a newer model, but it would still cost me over $150 and it would be a refurb. So they have a bunch of these printers that sat in a store that didn't sell and passing off printers not in a new box and then talk to me like i should be so thankful they gave me this wonderful discount for a "new" printer that nobody else wanted when i'm still stuck with a printer i paid full price for and should've been able to get replaced. Now i've really paid over $270 for a printer i'm not even sure i want that might have another bug they can't fix. It's just wrong. Anybody know a fix for this so i can cancel the order for a new printer i'm not sure i want?
thanks,

Pc off during Updating IOS 4.3.5

need help urgently! My pc off during updating IOS. Then i plus out my usb device n right now cannot connect back. Now my ipad2 hang with a itunes logo with plus in USB. i cant even connect back to the pc or any other pc. So what can i do now? pls help me out.

I mean plug*

Mac turned off during update

my macbook mid 2009 I don't remember how many inches but that doesn't matter
during updating from mountain lion to mavericks the mac ran to of energy and tried off and now it doesn't try on AT ALL, no start up sound, I don't feel or hear the CPU fan running and nothing
resetting the SMC didn't help
I tried to turn it on with the adapter and battery and adapter without battery
how to get it back?

The instructions in the link given can help you be able to use an
External USB Keyboard from any Windows OS computer if you
do not have an Apple USB Keyboard, so you can get into your
computer using standard keyboard shortcuts on startup.
•OS X: Keyboard shortcuts
•Keyboard mappings - Using PC Keyboard with Macintosh:
http://support.microsoft.com/kb/970299
Nothing more.
If you have hardware issues with your portable or other Mac
consider taking it to an Apple Store with Genius Bar; you can
call ahead or use their Support or Store link to inquire of how
to set an Appointment ahead, so you can plan a visit. In some
cases the diagnostic performed is a free service, even if your
Apple product no longer has any AppleCare or warranty plan.
http://www.apple.com/retail/geniusbar/
Good luck & happy computing!

Phone switched off during updating my Lumia 520 to...

My fully Charged Lumia go switched off during final process of installation of Lumia Cyan Update, as probabily its battery goes off. Now when i connect it to a charger as phone restarts installation starts again, but after 20-30 min. battery screen starts showing, d 1 which shows when we connects a empty battery phone to a charger instead of installation one. and then after that nothing happening, i tried to charge my battery through desktop charger but after a defined completion % of installation process, phone phone again starts charging. what would i do?

..or you may try the Nokia Software Recovery Tool ...

Power interuption during update now only line on bottom of the screen

power interruption while updating mac mini as it turned back on only white line on bottom of the screen
tried unplugging and rebooting nothing seems to work. line has been there for over an hour

Boot to recovery and reinstall the OS
OS X: About OS X Recovery - Apple Support
OS X Yosemite: Reinstall OS X

RV180 (wired only) problems with firmware 1.0.4.14, fails to boot correctly + LAN ports power off during boot (downgrading to 1.0.3.10 = fine again).

Hi All,
A few months ago when 1.0.4.14 was released I was quick to update to this version from 1.0.3.10 but very quickly ran into issues.
Bit of background info... I am not doing anything complex with this box, basic IP4 network over all LAN ports, no VLANs, firewall enabled and allowing 2 port access rules to a static IP address. Any static IPs are assigned manual at host level but all other devices receive DHCP IP addresses. I don’t host VPN on this RV180 but I do with another. Routing VPN has no issues. WAN is connected to another switch provided by my ISP who provides DHCP IP Address with their DNS etc. Only LAN ports 1 and 2 are connected, port 1 to my Wireless AP (AP mode passing all requests to the RV180, DHCP etc.), port 2 connects to a 8 port Smart Switch (but all 'Smart' features are currently not in use, so basic switching only). All other settings on the RV180 are on recommended defaults.
Everything is working fine on 1.0.3.10 but I have all kinds of issues after updating to 1.0.4.14. Here are the actions and experiences I had...
1) Backup my RV180 config to txt file.
2) Navigate to the firmware upgrade page and follow steps to complete the upgrade process from 1.0.3.10 to 1.0.4.14. *router does the normal process of upgrading*
3) RV180 reboots to complete but doesn’t come back up even after waiting 5-10 mins. LAN ports enable during boot up (link lights on) but after about 2mins turn off (no link lights). WAN light is on alongside the Power Light.
4) Power cycle even with rest... Same results.
5) Reset the RV180 to default settings. I can sometimes get the unit to boot up and the LAN remains active and powered up. The web UI is VERY slow compared with 1.0.3.10. Internet sometimes works and sometimes doesn't (I would expect it all work without issue on default settings).
6) I repeat this a few times, various resets, powered off waiting periods, etc. but I always have issues. I did manage to get some log file information and the Kernel appears in the Alert, Error and also the Warning logs (please see attached files).
7) I gave up at this point. No major issues like this reported on the internet from a few google searches etc. So I then reset to defaults (1.0.4.14), downgrade to 1.0.3.10 and finally reset to defaults again + restore backup config settings (with some manual changes).
The router has remained like this and seem to be working fine, but I would like any security improvements from 1.0.4.14 firmware on my device.
Anyone able to help, have the same issue or can advise me in any other ways?
I see 1.0.3.10 isn’t displayed as a firmware download on the standard support page for the RV180 now. Only 1.0.2.6 and 1.0.4.14. Do I need to downgrade again to 1.0.2.6 before upgrading to the latest version?
Regards,
~FAZ~

Hi,
I recently bought a RV180 router and immediately I encountered the same problem; practically I am not able to access the web GUI.
The PC is directly connected to the router, nothing else is connected; the TCP/IP configuration is as follows:
PC: 192.168.1.100
RV180: 192.168.1.1
GATEWAY: 192.168.1.1
SUBNET MASK: 255.255.255.0
Once the router is turned on, the power LED flashes fastly, the Ethernet LED is on but after few minutes it disappears and the PC detects a disconnection of the Ethernet cable.
The router is not pingable and, as I said, the web interface is not reachable.
I have tried to power cycle the router, to reset it (pressing the reset button for more than 3 second and for more than one minute), to access the rescue mode and download a new firmware through TFTP, but nothing worked.
Few times, after many boot and reset trials,I was able to access the web interface and in one of these occasions I updated the firmware to 1.0.4.14 but once the router is powered off the problem arises again at the next power on.
I have not tried yet to downgrade to an older firmware version.
Can you suggest any solution? thank you.

Do Not Power Down During Update - HP Envy D410

Help! Has any one had this problem? My touch screen on my printer is stuck on this message and has been for the last four days. The internet connection broke during the download and now I cannot get the printer to respond.
I have installed, uninstalled, reinstalled my drivers...nothing. I have done a hard shut down; plugged the printer in elsewhere and still the same message.

so my printer worked for a month and then it asked me if i wanted to install updates. It's been installing updates for three weeks and says not to turn off. I've turned it off several times and unplugged it a few times. No other buttons work on the screen because i can't get to them. Obviously it's a software problem but i can't find any updates to fix it. The guy on the help line said it's a hardware problem and that they'd offer me a $95 discount on a newer model, but it would still cost me over $150 and it would be a refurb. So they have a bunch of these printers that sat in a store that didn't sell and passing off printers not in a new box and then talk to me like i should be so thankful they gave me this wonderful discount for a "new" printer that nobody else wanted when i'm still stuck with a printer i paid full price for and should've been able to get replaced. Now i've really paid over $270 for a printer i'm not even sure i want that might have another bug they can't fix. It's just wrong. Anybody know a fix for this so i can cancel the order for a new printer i'm not sure i want?
thanks,

Power failed during update now won't restart

Had a power failure while the iMac was doing updates. Now I have a white apple screen and the grey spinning wheel on start and that's all I get. What do I do now?

I wonder would a UPS hold on long enough for updates to finish, even if set longer than five minutes? That seems to be asking a lot from a battery, especially if it's not brand new and may be getting weaker.
That isn't a yes or no answer, it depends on the UPS, what is plugged in and health of the battery. Mine will last about 20 minutes, the average update doesn't take that long however some can.
I also agree that it is wise to have backup, even better than TM or a recent clone is having both. Backups can fail too.

Itouch 5 standy or power off during sleep hours?

Should I leave my ipod on standy during sleep hours or turn it off?

If you want to receive notifications you have to leave it on. However, leaving wifi on uses up the battery. Your choice o

Laptop shut off during update

I recently bought a new Toshiba laptop 2 moths ago and I was running an update on my laptop, but then it shut off and it powers on and shows a blue error screen and continuously restarts. Help?

post your full model and operating system!
You get 90 days free tech support call 1-800-457-7777
Press f12 at start up and select hdd recovery option to recover your computer to out of box state, do not select to erase your hard drive or you will erase your recovery partition.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Why does my ipad mini power off during sync

My ipad mini shuts down during sync. Then I get a message that says the sync cannot be completed, because the ipad cannot be found...what's up?

Settings>General>Auto-Lock>Never

Updating system - do not power off. During shutdown.

Help.....when I shutdown my t420 and am conneced to external power, I consistently get a message during the shutdown process, something like "applying update 1 of 1. Do not power off or unplug your computer'. This is very consistent, happens every time, whether I have <knowingly> installed any updates or not. This causes the Thinkpad t420 to take a long time to power off.
I can't tell what is being updated or if this a real message or just some residual stuff from a past update.
any help/pointers on how to clear this would be appreciated.
R

do you have automatic windows update switched on in the control panel under Windows Update.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

My cat sat on the keyboard during update now the system is pale with apple in center and under that circling lines i cant either reboot or shut down.. Powering off only resumes the same. HELP

My Cat sat on the keyboard during regular updating of the system. First it went to hypo-slow with alot of beach ball action while i tried to power down for a restart and individually force quit most open apps. Restarted/Resumed same issue.. changed to( close open apps upon restart.).... Now it is light grey, apple icon in center nothing else but the rounding cursur under the middle/only apple icon..... just goes round and round...does not respond to any shutdowns other than power off..... Makes the regular start up noise and back to same routine.... PLease help if possible....
Thanks Tina Schlemer

Try booting to the recovery partition and running Disk Utility.
1, Boot while holding down the command and R keys (two keys).
see this page: http://www.apple.com/osx/recovery/
2. Run Disk Utility, select the hard drive in the left column, First Aid then click Repair Disk.
3. Quit DU and restart.
If that does not do it, you can reinstall the OS from the same screen as took you to DU.
(My cat has never been able to do what yours did. I think he is just trying to email his friends.)

Power off during updated

Similar Messages

Maybe you are looking for