Power on / bios password

Hey please help i my laptop has a power on/BIOS password that i know of but i dont know how to remove it. Kindly assist.

Hi,
At the password screen,hit enter 3 times and it should produce a 'halt code' - post back with this code.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Forgot the "power on" BIOS password for my Stream 11 do 11wm notebook.

    Please help. Forgot the BIOS password on my  Stream 11 do 11wm notebook. The system disabled number is 93944559 I would sure appreciate any help I can get with this problem.

    Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold  down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • Forgot Power On BIOS Password, need unlock

    Hello, cannot remember the password... after failing to enter the password correctly, the system responds with
    System Disabled
    [05393]
    can you provide me with the proper password?
    thanks
    This question was solved.
    View Solution.

    Hi,
    Try entering:      nlqrbo
                                        or
                                    vqukhto
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP635 notebook power-on BIOS password reset

    Hi,
    I have HP635 and the system disabled 65499477, help me to unlock my notebook.

    Hi,
    Try entering:    70591479
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • BIOS password (power-on password) replacement by fingerprint on x61s

    Hello, just bought x61s (type 7669) and want to know whether (and how) I can set fingerprint login for power-on password.
    Thanks
    On Lenovo web I found only "BIOS password (also known as power-on password) replacement is currently available on select ThinkPad notebook systems"  which is not really helpful for me
    Message Edited by snowbuk on 08-06-2008 09:19 AM
    Solved!
    Go to Solution.

    hi snowbuk,
    try this:
    1. set the power-on password within bios (save and reboot)
    2. go to "ThinkVantage Fingerprint Software"->fingerprints->register fingerprints->power-on password
    and add a new fingerprint (click on empty field above windows password)
    3. check "ThinkVantage Fingerprint Software"->security with power-on->
    and enable using fingerprints for startup (save and reboot system)
    plz check whether this works
    christian

  • CLEAR BIOS PASSWORD AND POWER-ON PASSWORD

    How do I remove my bios password and power-on password on my notebook? Hope that you'll help me with this. Thanks!

    Enter BIOS by tapping F10 immediately after powering on to enter BIOS. You may need to tap Esc key first, then F10 at the menu.Once into BIOS under Security disable all passwords by entering your current password and leave the new password blank. Save & Exit

  • How do I reset HP Mini 110-1006TU BIOS password

    BIOS password for HP Mini 110-1006TU PC can no longer be remembered. How can I reset the BIOS password? Have tried removing BIOS battery but to no avail.
    Thank you!

    Try this, remove the Notebook and CMOS battery, AC Adapter and the hold power button down for a few sec. Put everything back it and then power up the notebook...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Lost my BIOS PASSWORD on Probook 6560b

    Hi,
    I lost my BIOS password on my Probook 6560b.
    Can someone please help my how to solve this issue.
    After entering the password several times, no error is displayed, only a message to power off the laptop.
    Thank you in advance,
    regards,
    H.
    This question was solved.
    View Solution.

    Hi,
    Unfortunately,  business machines such as Probooks or Elitebooks have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case.
    If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Compaq mini cq10 130 sf bios password help

    Can you help me please with forgotten Bios password,its giving me this error code : CNU9496HJZ Thanks alot

    Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold  down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL 84Although I am an HP employee, I am speaking for myself and not for HP

  • Help Recovery Bios Password for Elitebook 8560p

    Forgotten Bios Password
    Hp EliteBook 8560p
    Error code: 0xc000000f
    System Locked
    Press the power button to restart system

    Try the reset tool by Mazzif:
    http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Help with Bios Password Reset Service

    I am trying to use the Bios Password Reset Service for Power On password and Hard Drive Password. The current setting in the Bios is "Enabled, In Progress". The Bios sidebar help tells me that in order to complete registration for this function to open the Create Recovery Media application and "follow instructions". I am lost, there is nothing there about the Password Reset Service. I have already created the Recovery disks and even a Rescue Media disk.
    I have found that in the Client Security Solution application, under the advanced tab there is a "Setup Hardware Password Reset" function but it is greyed out!
    Since this function is available for selection in Bios shouldn't I be able to use it?
    I am using the Windows logon password recovery function in Client Security with no problems.
    Any ideas??
    Thank you!!
    Installed BIOS: 7LETC5WW (2.25-1.08) Release Date: 2009/01/08
    Client Security Solution version: 8.20.0023.00
    PS. I don't want to circumvent any passwords, I just want to activate the Hardware Password Recovery function in case I ever need it.
    Message Edited by DAF on 02-09-2009 08:52 AM
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
    Solved!
    Go to Solution.

    UPDATE:
    In case anyone cares, I was finally able to figure out how to activate the Hardware Password Reset feature in my T61. Here is the solution, at least in my case:
    1)Found the file in Program Files->Lenovo->Client Security Solution->HwPwReset.exe
    2)Ran the file and followed the instructions
    3)A "Secure Environment" was created in the hardrive and the laptop restarted
    4)The laptop booted into the Secure Environment where I was asked to establish 3 security questions and answers.
    5)The laptop restarted and the status of the Pasword Reset function in BIOS changed to Registered.
    Now if I ever forget the Power-on or Hardrive passwords all I have to do is press F12 on boot-up, select Password Reset option, answer my security questions and voila, passwords are reset or removed. Very nice!
    BTW, I called Lenovo technical support twice and after talking to 3 "techs" and one supervisor they had no clue on how to do this. Go figure!
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64

  • Hp v 104 note book forgot power or administrator password

    Wen i put my power or administrator password in wrong 3 times I get system disabled 016906F7

    Cburg.
    In the mean time could you try this one???
    qetvvqve78
    1st and 6th letter lowercase Q.
    Use that code to go into the BIOS.
    Disable all passwords that are enabled.
    If asked for the CURRENT password uses that code.
    If asked for NEW password just hit enter.
    If asked to VERIFY password just hit enter.
    Save and exit.
    Let me know if it works or not.
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • How to reset the BIOS Password ?

    Hi there, My uncle just gave me an HP Mini 110 for I can write my lessons on it more easily than on my 17" gaming laptop which is pretty heavy and not really carriable. So the first time I turned on the notebook, it asked me the BIOS Password. At this time my uncle does not remember he set a BIOS Password and we tried multiple passwords but none of them worked. I don't know if it can help but I have this Error Code when I type a wrong password three times in a row : CNU9393LKW I just noticed that this code error is the same as the notebook's serial number. I hope someone will be able to help me.  Have a good evening,

    Please try this Password = e9lofofksd Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold  down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • HP EliteBook 820 removing bios password.

    Please help me removing bios password on HP EliteBook 820

    You can clear the CMOS to clear BIOS password.
    To clear CMOS, refer to the link mentioned below to remove the CMOS battery and wait for 20 seconds and then replace it and power on and check.
    http://h20464.www2.hp.com/index.html
    From this link, under product category select "Laptops and notebooks".
    Under product family select "HP elite noteook pcs".
    Under product series select "HP Elitebook 820 which your notebook model and then click on 
    remove replace videos at the bottom and then click Real time clock battery on the new window.
    This will show you the video to remove and replace RTC battery.
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    AntonyG1
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP Envy TS 17t-k000 BIOS password?

    Hello, I have an HP Envy TS 17t-k000 that somehow has a bios password request out of the blue, and  I don't remember ever entering a password. When I turn it on, I get a beep and then a little blue screen saying "Enter Administrator Password or Power On Password" and I cannot enter the BIOS or boot into Windows. I have tried pulling the battery for a day and that didn't do anything. After I fail to enter the password 3 times it says "System Disabled" and a number 51150848.  Can anyone help me?

     Enter  44838288 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

Maybe you are looking for