Power-on by LAN or Keyboard on K8NGM2-FID not working - no 5V standby power?

I have two K8NGM2-FID motherboards - I can't get wake-on-LAN to power up the boards. They don't seem to have the 5V standby active - when powered down, the LAN socket lights are off. Power-up by keypress does not work either, probably the same reason.
I've set up loads of PC's to wake-on-LAN, so I know what I'm doing, and I've tried three different PSU's that I know work in other PC's. I've also flashed to the latest BIOS, and (of course) activated the WOL feature in the BIOS. I know it won't work immediately after a hard power cycle.
Any ideas? I really need this for remote administration. I usually have a problem with PC's waking up when *not* asked to, not refusing to wake up!
Thanks,
Rick.

I am just learning about this board myself but I seem to recall this board has wake from S3 problems. I read that here, http://forums.anandtech.com/messageview.cfm?catid=29&threadid=1803985 . Hope this helps.

Similar Messages

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My wireless keyboard and mouse do not work on my All-In-One computer?

    Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
    A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
    1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
    2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
    3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
    Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

    "This machine has an added 4 USB ports, could this be causing a problem?
    It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
    Have you tried removing the card? That's where I would start.
    Keep us posted.

  • I bought the last apple wire keyboard , but it does not work with my usb ..

    i bought the last apple wire keyboard , but it does not work with my usb hub why ?
    the only way it works its when connecting it thrue my powerbook usb ...
    the problem is i HAVE TO USE IT THRUE AN USB HUB ... do you think its because my hub is cheap ? 10 $ .... i 've been told that it comes from the fact that i need an auto-alimented usb hub ...?.
    suggestions gentlemen ?

    I have eyes everywhere. Two of them can see the word "Paris", right below your name, at left.

  • I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Command-Z keyboard menu shortcut is not working

    Hi
    Command-Z keyboard menu shortcut is not working in my profile i.e.,my login. But able to execute the same keyboard shortcut in other profile. ALl the other menu keyboard shortcuts are working fine. Have tried deleting Universal Access, HotKeys,Finder Preference plist,. from ~/Library/Preference/ folder. But of no use. This shortcut is not working for any of the app.
    Thnks

    ok will try that and will let you know.. But the undo keyboard shortcut works well in other user profile.

  • My macbook pro mid 2009 keyboard and trackpad is not working.

    My macbook pro mid 2009 keyboard and trackpad is not working. it was working perfectly fine a week ago and it stopped. i tried using a external wireless mouse and keyboard but only the mouse will work!! They keyboard lights up when it is booting up but when i try to sign in, nothing types or the mouse wont work. i am fine if the mouse doesnt work because i can use an external one but can someone please help me?!

    The best option is an appointment at an Apple store genius bar and have the technicians diagnose the problem.
    Ciao.

  • Hi, my Hp Pavilion lap, keyboard and mouse is not working

    Hi, my Hp Pavilion lap, keyboard and mouse is not working while  i am login into  windows 8.1. but it works in bois mode. can you please tell me the reason 

    Hi there,
    I had the same problem so did some research. Downloaded this driver and now everything's sweet. Hope it works for you too!! (This is only to get your hdmi working, sorry can't help you with the rest)
    http://www.nvidia.co.in/object/Quadro_3D_Vision_US​Bdriver_197.03_in.html

  • Keyboard volume control does not work

    I have an iMac G5, running OS 10.5.8, and a new Apple Keyboard with Numeric Keypad. My keyboard volume control does not work. Any have ideas as to why ? (I have a similar set-up at work with no volume problems.)

    Try system prefs/keyboard/keyboard/ and uncheck Use all F1, F2 etc as standard function keys.
    Other wise the volume and brightness controls will only work if you hold down the function key first (fn)

  • After update, keyboard and trackpad does not work on MBA but wireless mouse works. I don't use a wireless keyboard. Stuck at login because need to enter pw. Anyone have this issue? Please help!

    My Macbook Air (13", mid 2011) right after I did the Maverick OS update. My keyboard on Macbook Air is not working and it says "There isn't a keyboard connected" (Bluetooth Keyboard Setup). I do not use a wireless keyboard. Apparently my bluetooth works because my wireless mouse works. I am currently stuck at my login screen not being able to get in because I can't even enter my password. I am, however, able to login as guests and get to the Keyboard viewer to type things with my wireless mouse. I really need my keyboard to work to use for my job. I need help please!

    I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too! 

  • Liquid spill on keyboard. Certain keys not working. Any inexpensive repair? re

    Water spill on the keyboard of my Mac Book Air. Now certain keys not functioning. A Mac friend suggested submerging in rice upside down to dry out. Didn't work. Warranty expired. Help!

    Yes, the "magic rice trick" doesnt work.
    inexpensive repair? No.
    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • Keyboard and trackpad does not work.

    Hey guys~
    I have the late 2009 Unibody Macbook Pro and just yesterday both my keyboard and trackpad have stopped working. I was wondering if anyone else has experienced this and know of a solution. I made upgrades to the macbook (added more memory and a better HD) but that was back 9 months ago. Ive tried reseting the PRAM but I can't because the keyboard just doesnt work at all. I had to run out and buy a temporary external keyboard to plug into the USB. Any help would be appreciated. Thanks in advance!

    I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too! 

  • HT2693 Downloaded the piano keyboard app and will not work at all...also no sound.  This app only.    Refund??

    I downloaded the piano keyboard app....will not work at all....the screen comes up but no a tigon when trying to use...also no sound.

    Try a couple of basic troubleshooting steps,
    Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Delete the app and reinstall. You will not have to pay for it again as long as you use the same Apple ID that you bought it with. Hold down on the icon until it jiggles, then tap the X on the icon to delete the app. Tap the home button to stop the apps from jiggling. Go back to the App Store purchased tab and download the app again.

  • HT2638 since updating iPhoto it has ceased to open.  i have tried to Hold down the Command and Option keys on the keyboard but it does not work.  iPhoto still does not open

    Since updating iPhoto it has ceased to open.  I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library,  but it does not work.  iPhoto still does not open.  can someone please help?
    thank you

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Happy Holidays

  • Aluminum keyboard eject button does not work on Windows XP

    I'm wondering if anyone else has the same issue:
    the eject disk button on my new aluminum keyboard does not work in Windows XP (Boot Camp).
    As I have a Mac Pro, there is no way of manually opening and closing the tray-loading Superdrive.
    I can open the drive if I right-click "My Computer>DVD drive>Eject" but there is no way of closing it back. I am obviously not a Windows XP expert, are there ways of mapping the eject function to any key?

    Actually, how does Software Update figure out what apps you have available for update?
    I always thought that Software Update looks at your /Library/Receipts to check what Apple pkgs you have for update, so I assumed that any Apple-related Pkg would be updated. I may be totally wrong on this, correct me if that is so...but thanks for the info.

Maybe you are looking for

  • The autosave feature does not work on Pages 5.2

    Since downloading the new version of Pages with Mavericks, the auto save fearure has never worked for me. After initally saving the document to iCloud, giving it a name and folder, every time I make a change I get the 'Edited' label next to the docum

  • Send to Motion - audio and video not in sync

    I'm using FC Studio 1 on a new iMac 2.4GHz Core 2 Duo with 2Gb memory. I've noticed that when I send to 'motion', my audio slips, losing the first second or so resulting in an un-synced clip. Does anyone know why this is happening and what I could do

  • Time Machine not backing up new folder created in Bridge

    Again, as has happened in the past, I create a folder under Adobe Bridge (photo raws and edits) that doesn't get backed up in TM. Since I've been burned in the past, I go checking into the TM backup ("Latest") after a backup to be sure the backup occ

  • Question on Moving from iPhoto to Aperture 3

    I have a rather large photo library in iPhoto 3 and I'd like to move to Aperture 3.  If I import my iPhoto library into Aperture, will I still have the same "lag" issues? Or does the new navigation in Aperture 3 allow me to browse smaller sections in

  • Javascipt mouseover on report page

    Hi experts I was wondering if anyone knew if it was was possible to get popup boxes similar to the help popup boxes when i create a report for example )last weeks) (this weeks) (to processed) (processed) What im wanting is when i move the mouse over