Power on password for compaq 6910p

How do I find out what the power on password is for a Compaq 6910p
This question was solved.
View Solution.

Hi:
Here is the service manual for the 6910p.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01566975/c01566975.pdf
You will find the information you need to clear the power on password in chapter 4, page 38.
Wait 30 minutes before re-connecting the CMOS battery, not 5. You may even want to leave it unplugged along with the main battery and start the notebook only with the A/C adapter with BOTH batteries disconnected. But at a minimum you must leave the main battery disconnected, and start only with the A/C adapter attached.
If that procedure does not clear the power on password, your predecessor enabled stringent security in the BIOS, and it will be your chance to get a new notebook for your new position, as the one you currently have will need a new motherboard in order to be of use again.
Paul

Similar Messages

  • Lost password power on password for Compaq Presario CQ56-219wm

    Lost administrative password system power pasword.  I need to reset rom/bios password, or delete/reset CMOS pasowrd. Please someone help me from losing my mind behind this; I will be most appreciative. thank You,RikcieAlan , Lompoc Calif.

     If this is a power on password, at the password screen, hit enter 3 times and you should receive a 'halt code' - enter this code on the site below. http://bios-pw.org/ Regards, DP-K

  • How to diable power on password for hp pro 3420 all in one

    how to disable power on password for hp pro 3420

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
    HP Pro 3420 All-in-One PC Support Page
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Forgot power on password for HP HSTNN-105C

    I forgot my power on password for HP HSTNN-105C 

    Hi CherylG,
    Yes, I could not find an HP laptop using the supplied user posted sytem ID. I don't work for HP and I try to help posters as best as I can. Info supplied by posters must be evaluated for relevance and my responses are provided based on indices of potential validity. In this case two instances of the same problem indicated potential linkage even though I could not identify the HP system involved.
    If the system is a laptop, the problem both individuals are having it is not so easy to correct. If you use a Power on Password you really should copy (backup) and store the password for future use.
    Thanks for your input!!
    Hey, we both used an HP 560z and we liked it!!
    Happy computing!
    Jaco
    ++++++++++++++++++++++++++++++++++++++++++++++++++​+++
    1 -H8 1380t CTO, Intel i7 3820 processor.
    16 GB DDR3, PC3 -12800 Ram. AMI bios(UEFI).
    Pegatron Motherboard- IPIWB-PB (Pittsburg) Beats Audio. AMD Graphics, Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    2 -Envy Phoenix 810-150se.
    Win 8.1 Pro
    i7 4820k Ivy Bridge, Pittsburg2 Mainboard, 12 GB DDR3, NVIDIA GTX 645- 2GB GDDR5. Win 8 Pro.
    Liquid cooled system.
    3 -HP 560z CTO AMD processor and chipset, AMD 6570 HD graphics, 16 GB DDR3. Win 7 Home Premium upgraded to Win 7 Pro.
    4 - HP ENVY 17t-j000 CTO Quad Edition Notebook. Win 8.0 Pro
    Errare humanum est.

  • Power on Password on Compaq NX6125

    Hi all, I was recently given a HP Compaq NX6125 Notebook after a school clearout and it has a power on password. Of course I did the usual protocol of CMOS battery removal and main system battery removal but this one is staying. My previous mehtods had worked on a much older model but not this one.
    I'm rather stuck which is un-usual for this type of thing but I would really appriciate anybodys help!
    Matthew Phillips

    Matt.
    Before leaving work today I tried to find your model.
    Just did not have the time to find one.
    On Monday I know I can find one we process that model all the time.
    The reason I was looking for one is that some of the BIOS chips are in a cradle.
    Meaning you can pop it out with a small screwdriver and replace it with a new one.
    http://www.ebay.com/itm/BIOS-CHIP-HP-Compaq-NX6125-/260947800881?pt=US_Motherboard_Components&hash=i...
    Then there are the ones that are soldered to the motherboard.
    Takes some skill to unsolder and resolder the chip.
    Let you know what I find on Monday.
    Regards,
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Don't know power on password for hp touchsmart 520-1020 windows 7 64 bit

    My touchsmart 520-1020 was powered off and when it came back on it was asking for a power on password. Can anyone help me with this? Please? when i enter a random password three times it doesn't give me a code. it shows a key each time i press enter after entering a password and after the third time it has an asterik. and then no more options. the date is shown at the bottom right hand corner.

    Hello cmeryers76:
                Your password should be the same one you use to log into windows.  Why you are seeing a date is be yound me. This seems more like a bad virus or malware. If your sign in password still fails. Unplug the computer while this screen is still being displayed. This is what we call fource restart. Ounce the computer is completely off plug it back in and turn on your computer you should start up in safe mode screen option use arrow keys select safe mode with net working. Close out help and support window. Locate the the recovery manger and  Click yes in prompt window if displays then select Microsoft System Restore in next two screens click on next You well eventually end up with dates listed choose a date before this event occurred then click next follow all command promts.  Ounce recovery point has been completed run your antivirus software. Then do a PC Tune Up.  Go to your control pannel and open up Performance Information and Tools  select Adjust power settings on the right hand side. Then select Choose when to off the display. Next window switch all boxes to never. You will never have to worry about this ever again.  On top of that the issues you face trying to wake up the computer from sleep mode. 
             If the same screen displays on start up by a chance then unplug the computer hold down power button for five secounds then plug it back in turn on computer tap f-8 key follow above recovery  steps. If this fails to open in safe mode. Then full recovery is only option  requires recover discs.  Power off the computer turn it on and tap f-10 key and insert disc one of recovery disc follow all command prompts. Ouce fullrecover is completed follow the above dirrections for the display settings above switch all thee settings to never. frrw

  • FORGOT POWER ON PASSWORD ON COMPAQ CQ58

    I FORGOT MY POWER ON PASSWORD ON MY COMPAQ CQ58CODE ON COMPUTER AFTER TRYING IS 50282400 PLEASE HELPTHANKS

    Hi,          Use the below code to reset 45180426 Or generate one from the below link http://bios-pw.org/

  • How to find the power-on password for hp cnd741sdz

    Hi, need help for an hp cnd741sdz displaying a power-on password key

    Welcome Chamuraq.
    Read my post here.
    http://h30434.www3.hp.com/t5/Notebook-Recovery/HP-530-BIOS-password-reset/td-p/2677777
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Enter administrator password or power on password for "System Disabled 94238025"

    I get the message, "Enter administrator password or Power on Password" when I open my laptop. What code do I enter in my HP 2000 when I receive the message "System Disabled 94238025". I appreciate any help you can give me!

    Hi: Please read the first post at the link below which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Master code for administrator password or power on password for HP Pavilion m6

    my HP Pavilion m6 you turn on just says administrator password or power on password
    I have never set one is password is there a master reset code

     Enter   75790504 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • How do I remove a power on password for a Pavilion HDX9494nr laptop?

    I have been trying to replace a damaged DVD drive for my son, so I could reload a non-booting OS, and the system reported drive errors from the new drive.  I went into to check the settings, but when I exited CMOS the system asked for a power-on password.  I did not set one so I have no clue what the password might be. 
    I know I need to remove the battery, remove a jumper, or perhaps push a reset button to eliminate the password, but I have no idea how which or how to identify and access these.  Any ideas?

    Welcome AZ.
    After 3 faild passwords do you reeive a code???
    Let me know that code.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Power-On Password for a HP Compacq nc8430

    The exact message is Power-On Password and a symbol of a key.
    I am trying to clear this Power-On Password message on a HP Compacq nc8430.  Searching though this forum and on the Internet, everyone mentions I should remove the laptop battery and the internal battery to clear this password.  I have do so and left the battery out overnight and the password is still there.
    I have found another mention of a IC or similar that is used on laptops to be more secure.  I have also found mention that some laptops can be reset by a "jumper" or by touching points on a motherboard.
    Thanks for your reply in advance!!
    This question was solved.
    View Solution.

    BMS.
    Sorry to hear that.
    It must mean that STRINGENT is enabled.
    Again sorry.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Please help i forgot my power up password for my pavilion dv 6500

    It keep giving me a disable code 02248
    This question was solved.
    View Solution.

    Omg it really worked. Thanks for the helpWakamoles

  • Master code for administrator password or power on password for HP Pavilion m6 error code 69639509

    master code please error code 69639509

     Enter   76791529 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • Power on password error

    I have an HP Compaq nc6200 laptop in which I have set up a power on password for. The problem is, when I try to enter my password, it does not work. I can enter my password up to 3 times then I get a little picture that looks like a circle with 3 lines sticking out the top and bottom. Is there a way I could solve this?
    Thank you!
    This question was solved.
    View Solution.

    Refer to the link mentioned below which is he manual for this particular model and check under the heading
    "1.2 Resetting the Computer" and follow the steps to clear the password.
    http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=447371&docId=emr_na-c00622160&docLocale=...
    Remove the main battery and the RTC battery. and then power the notebook up with AC power. That is supposed to clear the password.
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    AntonyG1
    Although I am an HP employee, I am speaking for myself and not for HP

Maybe you are looking for