Power Outage and Now Ethernet Not Working and When Imac Goes to sleep...
Last I had a power outage, now my ethernet connection does not work, I have switched cable powered everything off and back on, still nothing. Also since the outage when my MAC goes to sleep it does wake back up. Any Ideas?????
Russ,
Try booting up from the Tiger install disc (put disc in, restart, hold C key down as soon as you hear chime, release C when you see the spinning gear). Then select your languag, go to Disk Utility, select your startup disk and choose Repair Disk. Then quit installer and reboot normally.
Then when booted normally, do to Disk Utility, select your startup disk and Repair Permissions. Post back.
It is not good for a computer to experience a power outage while booted up. Various things can get messed up. After you get straightened out, I would strongly suggest getting an uninterruptible power supple (UPS or battery backup). I use one made by APC and think they are a very important accessory to have.
Regards,
Steve M.
Similar Messages
-
Updated iTunes and now iPhone not working and had to restore to old save
I plugged my phone in this weekend to sync with content on my PC and was prompted to update the iTunes software. I did this and then synced my iPhone. Worked ok for 24 hours, then suddenly the screen went in to what looked like max zoom, I couldn't get out of it as phone was locked. I connected to pc again and did restore to factory settings and then reload saved phone details, did this 3 times and still same problem. In the end I had to restore to a saved copy from the end of september, so lost any contact, calendar etc... updates....
Very frustated as this took my several hours and now need to work out what is missing. Any advice, thanksYou most likely had zoom on:
A simple double-tap with three fingers instantly zooms in and out 200% and you can double-tap and drag three fingers to dynamically adjust the magnification between 100% and 500%. -
Updated to windows 10 and now my computer stays black when it goes into sleep mode
I just updated my computer to windows 10. Whenever it goes into sleep mode and i try to move the mouse it just stays black and i have to turn my computer off and then on again. after that it finally works but its just annoying. I already tried updating my card driver, but it said it was already up to date.
My iMac i7 quad was having the same symptoms with the blue screen and long startup times a couple of months ago. Apple Care told me to bring it in to the local Apple Store, and after some diagnostics, the hard drive required replacing. It took one day to replace the hard drive and my iMac is running great. I only had the iMac for about 12 months when the drive needed to be replaced. Not sure if that is your Mac's problem, but it was for mine.
-
Power button and home button not working and dont have warranty
power button and home button not working and dont have warranty
I had the same problem went to a store and paid $80 to have them replace the cable and it works fine now.
-
I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode
I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring. -
My phone was left in a car overnight and now is not working correctly, screen looks funny and I cannot make calls? Will they be able to assist in a store?
Make an appointment at any Apple store, see what the genius bar says/does.
You don't metion whether the car was hot or cold. -
hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india .
My phone Accidentally fall in water tub. And now is not working .
For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they are not ready to replace my phone .
I also tried contacting local apple employee named " RATI KALE " , but didn’t got any positive response.
I provided them apple invoice, passport, visa details, my air ticket details. but still they are not ready to help me . My phone details are as below :
Serial No:C8*******T9Y , IMEI : 01*************995
Please help me in replacing my phone.
<Personal Information Edited by Host>Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support. -
I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?
I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up. -
HT4061 I dropped my phone in the toilet and now is not working. What should I do?
I dropped my phone in the toilet and now is not working. What should I do?
Put in in a bag of dry rice for a few days and see if that drys it out. Don't be surprised if it doesn't. You may need to take it to an Apple Store. They will offer you a replacement at a reduced price
Hope that helps -
HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time
my device was updated and now is not working anymore, it is in recovery mode all the time.
what can i do???Delete the shortcut you have at the moment and then create a new one as follows:<br><br>
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox.<br><br>
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)'''<br>
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future. -
I tried to upload my daughters videos she made on her iPod to my mac iPhoto and it seemed to have "Stuck" and now will not work at all. It had to a complete fix of the existing library. It will now not let me move pictures from the "Stream" to "photos", it looks like it is trying to but gets stuck and I have to force a shut down of the programe.
Thanks!-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use Custom Settings for History"''' -> REMOVE Checkmark from '''"Permanent Private Browsing mode"''' -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> When using the Location Bar, suggest: select "History and Bookmarks"
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working. -
actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....
You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced. -
INstaled tiger 10.4 and now DVDSP not working
INstaled tiger 10.4 and now DVDSP not working. The buttons on the top bar are not showing up and sometimes the entire working panel does not show up. Can somene help me fix it please. Also can someone let me know how you uninstal sofware. thanks.
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
This a pretty common question.
Best to start with a search first.
best wishes -
I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?
I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.
-
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272
Maybe you are looking for
-
I had my home theater hooked up to my Sound Blaster LIVE 24 bit, and everything was fine, but after getting some type of virus, I had to do a wipe & load of my OS. Now everything is working on my sound card EXCEPT the digital output. Am I missing som
-
how to directly stream movies from time capsule to apple tv without using pc and iTunes
-
Hi, just starting out so bear with me. I'm trying to create a website containing many videos. Instead of having each video listed across the top of my website (Navigation Bar???) I'd like a heading that says "Videos" and when that is clicked a page o
-
Workflow to send mail for purchase requisation and approval msg which automatically updates sap
I am new to workflow,I need to create work flow for purchase requisation and send mail for concern person for approval,like if he clicks approve in mail ,automatically it should get updated in sap if he rejects then he should enter reason for rejecti
-
How to execute process chains using planning function
hi, i need to execute process chains from web. i know the steps to that needs to be followed for accomplishing the task. 1) RSPC_CHAIN_START ( function module) into which process chain has to be passed 2) create a planning function to invoke the said