Power outage Mailbox Database won't mount
Hello,
We have experienced a power outage, when we brought the server back the Mailbox Database wouldn't mount.
After that i ran Eseutil /mh and was on dirty shutdown, the i did /r and finally /p
Database is now on Clean shutdown state but still doesn't mount, error in event viewer:
failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344) ---> Microsoft.Exchange.Data.Storage.AmOperationFailedException: An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344) ---> Microsoft.Mapi.MapiExceptionCallFailed: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344)
First time dealing with this problem, have i missed something?
I'm still unable to mount the Database, i've moved the logs out of the path and tried to mount with the same error.
the output of eseutil /mh
PS E:\Mailbox Database moved> eseutil /mh '.\Mailbox Database 1773415643.edb'
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 14.00
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
Database: .\Mailbox Database 1773415643.edb
DATABASE HEADER:
Checksum Information:
Expected Checksum: 0x0122201a
Actual Checksum: 0x0122201a
Fields:
File Type: Database
Checksum: 0x122201a
Format ulMagic: 0x89abcdef
Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,17
Engine ulVersion: 0x620,17
Created ulVersion: 0x620,17
DB Signature: Create time:11/10/2012 19:14:18 Rand:1372720 Computer:
cbDbPage: 32768
dbtime: 279606 (0x44436)
State: Clean Shutdown
Log Required: 0-0 (0x0-0x0)
Log Committed: 0-0 (0x0-0x0)
Log Recovering: 0 (0x0)
GenMax Creation: 00/00/1900 00:00:00
Shadowed: Yes
Last Objid: 1
Scrub Dbtime: 0 (0x0)
Scrub Date: 00/00/1900 00:00:00
Repair Count: 2
Repair Date: 11/10/2012 19:14:18
Old Repair Count: 0
Last Consistent: (0x2,8,4D) 11/10/2012 20:51:35
Last Attach: (0x1,9,6C) 11/10/2012 20:51:35
Last Detach: (0x2,8,4D) 11/10/2012 20:51:35
Dbid: 1
Log Signature: Create time:11/10/2012 20:51:35 Rand:7225210 Computer:
OS Version: (6.0.6002 SP 2 NLS 500100.50100)
Previous Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Incremental Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Copy Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Previous Differential Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Full Backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
Current Shadow copy backup:
Log Gen: 0-0 (0x0-0x0)
Mark: (0x0,0,0)
Mark: 00/00/1900 00:00:00
cpgUpgrade55Format: 0
cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
ECC Fix Success Count: found (15)
Last ECC Fix Success Date: 11/10/2012 19:30:10
Old ECC Fix Success Count: found (11)
ECC Fix Error Count: none
Old ECC Fix Error Count: none
Bad Checksum Error Count: found (620)
Last Bad Checksum Error Date: 11/10/2012 19:32:24
Old bad Checksum Error Count: found (518)
Last checksum finish Date: 00/00/1900 00:00:00
Current checksum start Date: 00/00/1900 00:00:00
Current checksum page: 0
Operation completed successfully in 2.277 seconds.
Similar Messages
-
Exchange 2010 database won't mount
We had a power outage and I believe that the database has been corrupted. When I try to mount a restored copy of the database the day before the crash it gives me the following error.
Microsoft Exchange Error
Failed to mount database 'Mailbox Database 0517197706'.
Mailbox Database 0517197706
Failed
Error:
Couldn't mount the database that you specified. Specified database: Mailbox Database 0517197706; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount
database. (hr=0x80004005, ec=-501)
. [Database: Mailbox Database 0517197706, Server:#########].
An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501)
. [Database: Mailbox Database 0517197706, Server: ###########]
An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501)
. [Server: ###########]
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501)So it appears that what happened may be that the copy back process was terminated earlier, hence the smaller file size etc. So what I would do is
1. Rename
Mailbox Database 0517197706.edb to "OLD_Mailbox Database 0517197706.edb"
2. if the TMP file is in same location as the main file I would then just rename
TEMPDFRG7840.EDB to
Mailbox Database 0517197706.edb. If the TMP file is in alternate location I would rename and then copy back into place where Exchange expects the file to live.
3. Then attempt a mount and report back
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope -
Exchange 2007 database won't mount due to MapiExceptionCallFailed errors
A server is running Exchange Server 2007 SP2 on Windows Server 2008 64-bit. After a couple years of running smoothly, the Windows Application event log started filling up with several instances every minute of the following error:
MSExchangeIS (2644) First Storage Group: A bad page link (error -327) has been detected in a B-Tree (ObjectId: 5, PgnoRoot: 10) of database H:\Microsoft\Exchange Server\Mailbox\First Storage Group\Mailbox Database.edb (165296 => 3185, 817790).
Messages sent to a specific mailbox on the server started getting returned as undeliverable with the message:
#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionCallFailed..."
I assumed that the event log messages and the delivery errors were related so I ran "eseutil /d" on the database but it exited with the message, "Operation terminated with error -1605 (JET_errKeyDuplicate, Illegal duplicate key) after 76.578 seconds. Running
eseutil /mh reports the database state as clean shutdown.
The Exchange database had been backed up nightly using Windows Server 2008 Backup. I restored the latest backup of the .edb file. Unfortunately, the corruption behind the bad page link error seemingly had propagated through the backups because the restored
.edb file had the same issues.
I then attempted to create a new clean database with the goal of then transferring mailbox data from the old to the new as described in the article "Simplifying the Dial Tone Database Recovery Process in Exchange 2007" (http://blogs.technet.com/b/dhardin/archive/2009/08/25/simplifying-the-dial-tone-database-recovery-process-in-exchange-2007.aspx).
I successfully created the new storage group and database with empty instances of all mailboxes but attempts to mount the old database yield this message:
Error: Exchange is unable to mount the database that you specified. Specified database: FASTMAIL\NewStorageGroup\Mailbox Database; Error code: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-344)
I then tried to return to the initial state of having a corrupted database but one that would at least function temporarily for all but the one broken mailbox. The idea would be to instruct individual users to run the Outlook archive command to back their
messages up locally into .pst files. Unfortunately, all attempts to mount the original .edb file yield the same MapiExceptionCallFailed error. I also tried to mount the database after deleting the transaction log files.
I searched the web for information on this error. There are some pages describing similar errors such as "hr=0x80004005, ec=2417" but I could not find any for "ec=-344". Some articles recommend running IsInteg.exe but this utility only works for databases
that are already mounted and I am unable to mount the database.
The Exchange server is running again using the empty database so that the users can at least send and receive mail. I get the sinking feeling that all hope is lost and the historical mail data that was stored on the server is gone for good. Before I face
the pitchforks of the angry mob, I figured that I would at least post an inquiry on an Exchange-related forum.
Are there any other steps I should take to try to recover the old data?have you checked the health of the database using eseutil /mh "edbfilename.edb" ?
is the state: Clean Shutdown ?
If it is in clean shutdown state, then move the old logs, chk, .jrs files and select the option "This database can be overwritten by a restore" and mount the database.
In case if your database is not in clean shutdown state then you would need to work towards getting the database to clean shutdown using any of the following strategies based on the criteria that the database is affected with !
1. soft recovery
2. Hard Recovery
3. Hard repair
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
Information is provided is "AS IS" and confers NO Rights!! -
DVR 8888 message after power outage. TV won't turn on.
Moved to the Xfinity TV and Equipment forum.
If the TV won't turn on that's a TV issue, all we can say is check the power cord, otherwise you may need a new TV. However if the box isn't progressing past the 8888 either, then the box may need replaced.
-
External Drive Won't Mount After Power Failure
I was in the process of erasing a hard disk that was repeatedly not behaving correctly when the power went out last night. Now it won't mount at all, though another external disk I have daisy chained to it will mount. I have tried unplugging it (both the firewire cable and power) and it still won't mount. Any ideas? Thanks.
Actually, the opposite is true; you can't reformat a mounted volume. If the device isn't showing up in the left hand side of Disk Utility at all then you've probably got a hardware problem.
-
CAS restart and Mailbox database dismount unexpectedly somtimes
Hi all,
In my environment I have 2 Exchange server 2013 (CAS + Mailbox Role both) CU2 : EX01 & EX02 in DAG01. Sometimes CAS service is restarted or Mailbox Database copy on Exchange servers is dismounted unexpectedly. For example today:
I have "Mailbox Database 01" copies on EX01 & EX02
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status
Mailbox Database 01\EX01 Healthy
Mailbox Database 01\EX02 Mounted
"Mailbox Database 01" copy on EX02 is dismounted, of course the other copy on EX01 is mounted automatically
Log Name: Application
Source: MSExchangeRepl
Date: 4/3/2015 2:32:19 PM
Event ID: 2153
Task Category: Service
Level: Error
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The log copier was unable to communicate with server 'EX01.mydomain.com'. The copy of database 'Mailbox Database 01\EX02' is in a disconnected state. The communication error was: An error occurred while communicating with server 'EX01'. Error: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. The copier will automatically retry after a short delay.
CAS service on EX01 , The Microsoft Exchange Mailbox Assistants service on EX02 are restarted
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:25:49 PM
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX01.mydomain.com
Description:
The Microsoft Exchange RPC Client Access service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:25:51 PM
Event ID: 7036
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: EX01.mydomain.com
Description:
The Microsoft Exchange RPC Client Access service entered the running state.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:25:54 PM
Event ID: 7032
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX01.mydomain.com
Description:
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange RPC Client Access service, but this action failed with the following error:
An instance of the service is already running.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:30:28 PM
Event ID: 7031
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The Microsoft Exchange Mailbox Assistants service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:30:30 PM
Event ID: 7036
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The Microsoft Exchange Mailbox Assistants service entered the running state.
Log Name: System
Source: Service Control Manager
Date: 4/3/2015 3:30:33 PM
Event ID: 7032
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange Mailbox Assistants service, but this action failed with the following error:
An instance of the service is already running.
On EX01 I can see many 1309 , 2009 , 6002 , 4999 in Event Viewer on both servers, and they just used half of RAM
I'm going to upgrade to SP1 this weekend but please help me to figure out really reason of this issue, limit of max connections on Exchange/Window server , or Disk IO or something ?
Thanks for your help.Last night I tried reseed Mailbox Database 01\EX02 , about 8:15 PM
I checked event viewer, last 2153 event happened on 7:49 PM, check around :
Get-MailboxDatabaseCopyStatus -Server ex02 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 07\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 01\EX02
IncomingLogCopyingNetwork : {EX01,ReplicationDagNetwork01,An error occurred while communicating with server
'EX01'. Error: Unable to write data to the transport connection: An established
connection was aborted by the software in your host machine.}
OutgoingConnections :
Name : Mailbox Database 99\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Get-MailboxDatabaseCopyStatus -Server ex01 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 01\EX01
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 99\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 07\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Then I suspend and update Mailbox Database 01\EX02
Suspend-MailboxDatabaseCopy -Identity "Mailbox Database 01\EX02"
Update-MailboxDatabaseCopy -Identity "Mailbox Database 01\EX02" -Network "DAG01\ReplicationDagNetwork01"
Confirm
Are you sure you want to perform this action?
Seeding database copy "Mailbox Database 01\EX02".
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
The seeding operation failed. Error: An error occurred while running prerequisite checks. Error: Log files exist in
'D:\Exchange Mailbox Database\Mailbox Database 01'. You must remove them before database seeding or reseeding can be
performed. You can use the Update-MailboxDatabaseCopy cmdlet with the -DeleteExistingFiles or -SafeDeleteExistingFiles
parameter to do this. [Database: Mailbox Database 01, Server: EX02.mydomain.com]
+ CategoryInfo : InvalidOperation: (Mailbox Database 01:String) [Update-MailboxDatabaseCopy], SeedPrepare
Exception
+ FullyQualifiedErrorId : [Server=EX02,RequestId=56f71c07-6209-4aae-94cb-bf3cfc0a38fd,TimeStamp=4/22/2015 1:0
5:56 PM] [FailureCategory=Cmdlet-SeedPrepareException] 5F5B4C53,Microsoft.Exchange.Management.SystemConfigurationT
asks.UpdateDatabaseCopy
+ PSComputerName : ex02.mydomain.com
I want they use DAG01\ReplicationDagNetwork01 (1Gbps) for reseeding database, then I tried to add -SafeDeleteExistingFiles
Update-MailboxDatabaseCopy -Identity "Mailbox Database 01\EX02" -Network "DAG01\ReplicationDagNetwork01" -SafeDeleteExistingFiles
Confirm
Are you sure you want to perform this action?
Seeding database copy "Mailbox Database 01\EX02".
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):
The seeding operation failed. Error: An error occurred while running prerequisite checks. Error: An error occurred
when trying to run the database redundancy validation checks for database 'Mailbox Database 01' due to
'SafeDeleteExistingFiles' being specified. Error: There were database redundancy check failures for database 'Mailbox
Database 01' that may be lowering its redundancy and putting the database at risk of data loss. Redundancy Count: 1.
Expected Redundancy Count: 2. Detailed error(s):
ex02:
Database 'Mailbox Database 01' does not have enough copies configured to meet the validation criteria.
[Database: Mailbox Database 01, Server: EX02.mydomain.com]
+ CategoryInfo : InvalidOperation: (Mailbox Database 01:String) [Update-MailboxDatabaseCopy], SeedPrepare
Exception
+ FullyQualifiedErrorId : [Server=EX02,RequestId=48374aa6-1198-4976-a435-3eb034dc5b58,TimeStamp=4/22/2015 1:0
8:44 PM] [FailureCategory=Cmdlet-SeedPrepareException] 458ED9A2,Microsoft.Exchange.Management.SystemConfigurationT
asks.UpdateDatabaseCopy
+ PSComputerName : ex02.mydomain.com
I think I should stop here, search more about -DeleteExistingFiles before continue. So I Resume-MailboxDatabaseCopy "Mailbox Database 01\EX02"
Everything is fine, I checked again
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server ex02 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 07\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 01\EX02
IncomingLogCopyingNetwork : {EX01,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 99\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
[PS] C:\Windows\system32>Get-MailboxDatabaseCopyStatus -Server ex01 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 01\EX01
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 99\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 07\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections
What is going on :) ? IncomingLogCopyingNetwork for Mailbox Database 01\EX02 is fine :) til mid night
This morning I view events on EX02 and event 2153 appears again on 7:30 AM , I run command et-MailboxDatabaseCopyStatus again
Get-MailboxDatabaseCopyStatus -Server ex02 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 07\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 01\EX02
IncomingLogCopyingNetwork : {EX01,ReplicationDagNetwork01,An error occurred while communicating with server
'EX01'. Error: Unable to write data to the transport connection: An established
connection was aborted by the software in your host machine.}
OutgoingConnections :
Name : Mailbox Database 99\EX02
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Get-MailboxDatabaseCopyStatus -Server ex01 | fl name,*incoming*,*outgoing*
Name : Mailbox Database 01\EX01
IncomingLogCopyingNetwork :
OutgoingConnections : {}
Name : Mailbox Database 99\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Name : Mailbox Database 07\EX01
IncomingLogCopyingNetwork : {EX02,ReplicationDagNetwork01}
OutgoingConnections :
Any suggest ? -
Cannot open database after power outage
We had a power outage that took down our Sun server. On that server I have two Oracle 10.1.0 instances. One instance comes up without issue. The second I can mount but I get an error when I attempt to open it.
ORA-01092: ORACLE instance terminated. Disconnection forced
if I look at the alert log the only thing I see is
Thu Apr 25 16:44:31 2013
Running without dynamic strand for Non-Enterprise Edition
And here is the trc file
Oracle Database 10g Release 10.1.0.5.0 - 64bit Production
ORACLE_HOME = /oracle/product/10.1.0
System name: SunOS
Node name: oracle-pratt
Release: 5.9
Version: Generic_117171-05
Machine: sun4u
Instance name: train
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
2882
kstwlb: SGA is no longer mapped
AUM timeouts: MQL_TUNE(300s) TUR_TUNE(60s) SESS_EXPRN(1800s) QRY_EXPRN(1800s) SL
OT_PERIOD(600s) MQL_CUSHION(300s) KSUCKI_FG_PERIOD(150s) MMNL_EXPRN(1200s) KTTSI
NFO(300s)
Any suggestions on how to get it connected? This is an old system but there is some data in that database I would like to recover.
Thanks in advance.
JoeThis is what I got on the startup attempt:
SQL> connect / as sysdba
Connected to an idle instance.
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 536870912 bytes
Fixed Size 1303824 bytes
Variable Size 270801648 bytes
Database Buffers 264241152 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
This is all that is shown in the alert log:
Mon May 6 09:01:14 2013
Shutting down instance (abort)
Mon May 6 09:01:22 2013
Running without dynamic strand for Non-Enterprise Edition
Thanks -
Running Server 2008 R2 fully patched with Exchange 2010 SP1 Rollup Package 6
When attempting to mount mailbox database, I receive the following error:
Microsoft Exchange Error
Failed to mount database 'Mailbox Database 2034345905'.
Mailbox Database 2034345905
Failed
Error:
Couldn't mount the database that you specified. Specified database: Mailbox Database 2034345905; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount
database. (hr=0x80004005, ec=-583)
. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com].
An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com]
An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
. [Server: www.myservername.com]
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
OK
Application Log entry shows the following:
Log Name: Application
Source: MSExchange Management Application
Date: 11/6/2011 10:41:35 PM
Event ID: 5000
Task Category: AdminAuditLog
Level: Error
Keywords: Classic
User: N/A
Computer: www.myservername.com
Description:
Failed to save admin audit log for this cmdlet invocation.
Organization:
Log content:
Subject: myservername.com/Users/Administrator : Mount-Database
Body:
Cmdlet Name: Mount-Database
Object Modified: Mailbox Database 2034345905
Parameter: Identity = Mailbox Database 2034345905
Caller: myservername.com/Users/Administrator
Succeeded: False
Error: System.InvalidOperationException: Couldn\'t mount the database that you specified. Specified database: Mailbox Database 2034345905; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message:
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com]. ---> Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperException: An Active Manager operation failed.
Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Exchange.Data.Storage.AmOperationFailedException: An Active Manager operation failed.
Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Mapi.MapiExceptionCallFailed: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n\r\n
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)\r\n at Microsoft.Mapi.ExRpcAdmin.MountDatabase(Guid guidStorageGroup, Guid guidMdb, Int32 ulFlags)\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid, MountFlags flags)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()\r\n
at Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode opCode, Action operation)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid mdbGuid, MountFlags storeFlags,
AmMountFlags amMountFlags, AmDbActionCode actionCode)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n --- End of inner exception stack trace (Microsoft.Mapi.MapiExceptionCallFailed) ---\r\n --- End of stack trace on server (www.myservername.com) ---\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo)\r\n at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation)\r\n at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String serverToRpc, Guid dbGuid, AmMountArg mountArg)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs )\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler ev)\r\n --- End of inner exception stack trace (Microsoft.Exchange.Data.Storage.AmOperationFailedException) ---\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan timeout)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, DatabaseMountDialOverride
mountDialOverride, AmDbActionCode actionCode)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n --- End of stack trace on server (WWW.myservername.com) ---\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String
serverName, RpcErrorExceptionInfo errorInfo)\r\n at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint rpcOperationHint, Database database, String targetServer, InternalRpcOperation rpcOperation)\r\n
at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags storeMountFlags)\r\n at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()\r\n --- End of inner
exception stack trace ---
Run Date: 2011-11-07T03:41:32
OriginatingServer: WWW (14.01.0355.001)
Error:
Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=myservername/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=WWW/cn=Microsoft System Attendant. ---> Microsoft.Mapi.MapiExceptionNetworkError:
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: WWW.myservername.com
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=177]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x0][length=82][latency=31]
Lid: 25964 StoreEc: 0x824
Lid: 38951 EMSMDB.EcDoDisconnect called [length=8]
Lid: 55335 EMSMDB.EcDoDisconnect returned [ec=0x0][length=12][latency=0]
Lid: 36081
Lid: 52465 StoreEc: 0x80040115
Lid: 60065
Lid: 33777 StoreEc: 0x80040115
Lid: 59805
Lid: 52209 StoreEc: 0x80040115
Lid: 56583
Lid: 52487 StoreEc: 0x80040115
Lid: 19778
Lid: 27970 StoreEc: 0x80040115
Lid: 17730
Lid: 25922 StoreEc: 0x80040115
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity windowsIdentity,
String applicationId)
at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(MapiStore linkedStore, LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, GenericIdentity auxiliaryIdentity)
at Microsoft.Exchange.Data.Storage.MailboxSession.<>c__DisplayClass12.<CreateMailboxSession>b__10(MailboxSession mailboxSession)
at Microsoft.Exchange.Data.Storage.MailboxSession.InternalCreateMailboxSession(LogonType logonType, ExchangePrincipal owner, CultureInfo cultureInfo, String clientInfoString, IAccountingObject budget, Action`1 initializeMailboxSession, InitializeMailboxSessionFailure
initializeMailboxSessionFailure)
at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString,
PropertyDefinition[] mailboxProperties, IList`1 foldersToInit, GenericIdentity auxiliaryIdentity, IAccountingObject budget)
at Microsoft.Exchange.Data.Storage.MailboxSession.ConfigurableOpen(ExchangePrincipal mailbox, MailboxAccessInfo accessInfo, CultureInfo cultureInfo, String clientInfoString, LogonType logonType, PropertyDefinition[] mailboxProperties, InitializationFlags
initFlags, IList`1 foldersToInit, IAccountingObject budget)
at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsSystemService(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data, LogMessageDelegate logMessage)
at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Management Application" />
<EventID Qualifiers="49152">5000</EventID>
<Level>2</Level>
<Task>5</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-11-07T03:41:35.000000000Z" />
<EventRecordID>90607</EventRecordID>
<Channel>Application</Channel>
<Computer>www.myservername.com</Computer>
<Security />
</System>
<EventData>
<Data>Subject: myservername.com/Users/Administrator : Mount-Database
Body:
Cmdlet Name: Mount-Database
Object Modified: Mailbox Database 2034345905
Parameter: Identity = Mailbox Database 2034345905
Caller: myservername.com/Users/Administrator
Succeeded: False
Error: System.InvalidOperationException: Couldn\'t mount the database that you specified. Specified database: Mailbox Database 2034345905; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message:
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com]. ---> Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperException: An Active Manager operation failed.
Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Exchange.Data.Storage.AmOperationFailedException: An Active Manager operation failed.
Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Mapi.MapiExceptionCallFailed: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n\r\n
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)\r\n at Microsoft.Mapi.ExRpcAdmin.MountDatabase(Guid guidStorageGroup, Guid guidMdb, Int32 ulFlags)\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid, MountFlags flags)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()\r\n
at Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode opCode, Action operation)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid mdbGuid, MountFlags storeFlags,
AmMountFlags amMountFlags, AmDbActionCode actionCode)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n --- End of inner exception stack trace (Microsoft.Mapi.MapiExceptionCallFailed) ---\r\n --- End of stack trace on server (www.myservername.com) ---\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo)\r\n at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation)\r\n at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String serverToRpc, Guid dbGuid, AmMountArg mountArg)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs )\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler ev)\r\n --- End of inner exception stack trace (Microsoft.Exchange.Data.Storage.AmOperationFailedException) ---\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan timeout)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, DatabaseMountDialOverride
mountDialOverride, AmDbActionCode actionCode)\r\n at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n --- End of stack trace on server (WWW.myservername.com) ---\r\n at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String
serverName, RpcErrorExceptionInfo errorInfo)\r\n at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint rpcOperationHint, Database database, String targetServer, InternalRpcOperation rpcOperation)\r\n
at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags storeMountFlags)\r\n at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()\r\n --- End of inner
exception stack trace ---
Run Date: 2011-11-07T03:41:32
OriginatingServer: WWW (14.01.0355.001)
</Data>
<Data>
</Data>
<Data>Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=myservername/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=WWW/cn=Microsoft System Attendant. --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: WWW.myservername.com
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=177]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x0][length=82][latency=31]
Lid: 25964 StoreEc: 0x824
Lid: 38951 EMSMDB.EcDoDisconnect called [length=8]
Lid: 55335 EMSMDB.EcDoDisconnect returned [ec=0x0][length=12][latency=0]
Lid: 36081
Lid: 52465 StoreEc: 0x80040115
Lid: 60065
Lid: 33777 StoreEc: 0x80040115
Lid: 59805
Lid: 52209 StoreEc: 0x80040115
Lid: 56583
Lid: 52487 StoreEc: 0x80040115
Lid: 19778
Lid: 27970 StoreEc: 0x80040115
Lid: 17730
Lid: 25922 StoreEc: 0x80040115
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity windowsIdentity,
String applicationId)
at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(MapiStore linkedStore, LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, GenericIdentity auxiliaryIdentity)
at Microsoft.Exchange.Data.Storage.MailboxSession.<>c__DisplayClass12.<CreateMailboxSession>b__10(MailboxSession mailboxSession)
at Microsoft.Exchange.Data.Storage.MailboxSession.InternalCreateMailboxSession(LogonType logonType, ExchangePrincipal owner, CultureInfo cultureInfo, String clientInfoString, IAccountingObject budget, Action`1 initializeMailboxSession, InitializeMailboxSessionFailure
initializeMailboxSessionFailure)
at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString,
PropertyDefinition[] mailboxProperties, IList`1 foldersToInit, GenericIdentity auxiliaryIdentity, IAccountingObject budget)
at Microsoft.Exchange.Data.Storage.MailboxSession.ConfigurableOpen(ExchangePrincipal mailbox, MailboxAccessInfo accessInfo, CultureInfo cultureInfo, String clientInfoString, LogonType logonType, PropertyDefinition[] mailboxProperties, InitializationFlags
initFlags, IList`1 foldersToInit, IAccountingObject budget)
at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsSystemService(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data, LogMessageDelegate logMessage)
at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)</Data>
</EventData>
</Event>We just ran into this exact problem this morning. At 7:26am the database just dismounted. No errors just dismount. Now they won't mount and we can't run eseutil /p or /d as it immediately errors out. /k works and no errors found.
Bandaid fix was to go into the EMS and simply move the public and private db to a nas. Now they mount fine. This is strictly a temp solution to get the server back online but something was changed in host machine drive setup (hyperv with compellent san)
According to the host service (county systems) nothing was done or changed and no updates.
At any rate it is now working and we just need to know what can be done to migrate back to the san and off the nas.
Here is the error when trying to mount - the key is the -583 as none of the other errors comply with is special instance
Failed to mount database 'Mailbox Database 2017935857'.
Mailbox Database 2017935857
Failed
Error:
Couldn't mount the database that you specified. Specified database: Mailbox Database 2017935857; Error code: An Active Manager operation failed. Error: An error occurred during discovery of the database availability group topology. Error: The database action
failed. Error: [Active Manager] An exception occurred: Operation failed with message: MapiExceptionCallFailed:
Unable to mount database. (hr=0x80004005, ec=-583)
.. [Database: Mailbox Database 2017935857, Server: xxx.xxx.local].
An Active Manager operation failed. Error: An error occurred during discovery of the database availability group topology. Error: The database action failed. Error: [Active Manager] An exception occurred: Operation failed with message: MapiExceptionCallFailed:
Unable to mount database. (hr=0x80004005, ec=-583)
.. [Database: Mailbox Database 2017935857, Server: xxx.xxx.local]
An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
. [Server: xxx.xxx.local]
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
virtualfailsafe -
Time Machine won't recognize my last backup after a power outage
Good Afternoon Everyone,
I just set up a Western Digital My Book Live on my network. Last week, I set up Time Machine to start a backup on my MacBook Pro (running 10.7.5). It took 2 days to finish, but all went well. For three days, all the backups worked perfectly. However, we had a power outage for an hour during the night and now that I turn on my MacBook Pro, Time Machine recognizes the disk, but doesn't have a record of any backup.
I have gone to the drive manually and seen that the files are still there, but how to I tell Time Maching on my MacBook that the full backup is already on that NAS drive, so that it won't do a full backup?
I would really appreciate the help.
BrettTM apparently identifies the machine's backup by the Computer Name stored in the Sharing preferences. Try opening Sharing preferences and changing the Computer Name to the one you used previously when your TM backup was created.
Also see:
Time Machine Troubleshooting
Here are several articles to help troubleshoot Time Machine Problems as well as assist in properly setting up Time Machine.
Mac 101- Using Time Machine in Mac OS X 10.5 Leopard
Is Time Machine all you need?
Some advice for those using Time Machine
TidBITS Macs & Mac OS X- Time Machine- The Good, the Bad, and the Missing Features
Mac OS X 10.5- Time Machine backups are not visible
OS X 10.5- Time Machine stops backing up to external disk
10.5- Disable the 'use this disk?' Time Machine dialog
Time Machine tips and troubleshooting
Mac OS X 10.5 Help- Restoring files backed up with Time Machine
OS X 10.5- Using Time Machine and troubleshooting Time Machine issues -
Unable to Mount Mailbox Databases
I migrated a hyper v exchange server to a new hyper v host. After the migration I am unable to get the mailbox databases to mount. The error message I receive when I try to mount is:
Error code: An active manager operation failed. Erorr the database action failed. Erorr: operation failed with the message: MapiExecptionAccess unable to mount database. hr=0x8007005, ec=-2147024891
The server is running on 2008 R2 Enterprise
Any help would be appreciated.
ThanksHi,
Maybe it is related to the TEMP & TMP environment variables, please try the below article to modify the temp folder. After that, please recreate the ActiveSync virtual directory to check the result. About how to rebuild virtual directory, you can refer
to
this article.
PRB: CS0013 or CS0016 Compilation Errors in ASP.NET Web Applications
http://support.microsoft.com/kb/825791
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
External Firewire drives power up, but won't mount.
I wanted to see if anyone else is having this problem. I recently upgraded my mom's laptop to OSX Lion after she experienced a lot of problems with Snow Leopard. All updates available from Software Update have been installed. Now 2 issues have arisen after the new install: 1) the FW 800 and 400 ports appear to be non-functional, and 2) the OS takes about 10 minutes to boot up to the desktop.
1) Regarding the FW ports: I have a couple external Firewire 800 hard drives that I use on other Macs so I know they're fully operational and mount without any issues. They're both 5400RPM drives that have been inserted into Macally external enclosures, and are of different capacities - one is 320GB and the other is 500GB. The enclosures offer FW 800, 400, USB 2.0 and mini-USB connectivity. But after upgrading the laptop I mentioned, neither of the drives will mount when using the FW 800 or 400 cables. They power up but won't mount, and they don't show up in the list in Disk Utility. However, the drives will power up and mount via USB.
I realize the laptop may have a hardware/port problem - but both 800 and 400 ports? Seems unlikely.
2) Any idea why it's taking the OS 10 minutes to boot up? I've shut down the laptop and rebooted it twice since the OS install, and both times took 10 minutes.
I may just install Lion on one of the hard drives, pull it and then pop it into the laptop to see if that makes any difference. Before I do that, can anyone recommend a hardware utility that can check the ports?
I welcome your suggestions.
Thank you.Thanks for responding. Here's the info you requested. I'm not a systems guy so hopefully I've pasted in something that helps.
system.log report, after searching BOOT_TIME, here's one of the timestamps:
May 25 22:04:58 localhost bootlog[0]: BOOT_TIME 1337997898 0
Here's a chunk of the log after that timestamp:
May 25 22:05:00 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
May 25 22:05:13 localhost com.apple.launchd[1] (com.apple.powerd): Unknown value for key POSIXSpawnType: Interactive
May 25 22:05:13 localhost com.apple.launchd[1] (com.apple.sandboxd): Unknown value for key POSIXSpawnType: Interactive
May 25 22:05:18 localhost com.apple.pfctl[34]: No ALTQ support in kernel
May 25 22:05:18 localhost com.apple.pfctl[34]: ALTQ related functions disabled
May 25 22:05:18 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
May 25 22:05:18 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
May 25 22:05:19 localhost com.apple.ucupdate.plist[28]: ucupdate: Checked 1 update, no match found.
May 25 22:06:14 localhost configd[14]: InterfaceNamer: timed out waiting for IOKit to quiesce
May 25 22:06:14 localhost configd[14]: Busy services :
May 25 22:06:14 localhost configd[14]: MacBookPro3,1 [76967, 4375662836 ms]
May 25 22:06:15 localhost mDNSResponder[37]: mDNSResponder mDNSResponder-320.16 (Mar 17 2012 21:31:16) starting OSXVers 11
May 25 22:06:15 localhost com.apple.locationd[40]: ERROR,Time,359690775.485,Function,"_Apple80211* CLWifiService::createApple80211()",Apple80211GetIfListCopy failed, error -3903 (Unknown error: -3903)
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,1 locationd 0x00000001077fe583 locationd + 624003
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,2 locationd 0x00000001077fe719 locationd + 624409
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,3 libdispatch.dylib 0x00007fff85f46c79 _dispatch_barrier_sync_f_invoke + 33
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,4 locationd 0x00000001077fe9b0 locationd + 625072
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,5 locationd 0x00000001077fea10 locationd + 625168
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,6 libsystem_c.dylib 0x00007fff85e96e06 pthread_once + 86
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,7 locationd 0x00000001077fea47 locationd + 625223
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,8 locationd 0x00000001077f33ac locationd + 578476
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,9 locationd 0x00000001077f353f locationd + 578879
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,10 libsystem_c.dylib 0x00007fff85e96e06 pthread_once + 86
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,11 locationd 0x00000001077f3509 locationd + 578825
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,12 locationd 0x00000001077b052a locationd + 304426
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,13 locationd 0x0000000107791653 locationd + 177747
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,14 locationd 0x0000000107791a08 locationd + 178696
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,15 locationd 0x00000001077921b2 locationd + 180658
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,16 locationd 0x00000001077c332c locationd + 381740
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,17 locationd 0x0000000107767fd8 locationd + 8152
May 25 22:06:15 localhost com.apple.locationd[40]: STACK,Time,359690775.485,18 ??? 0x0000000000000001 0x0 + 1
May 25 22:06:15 localhost com.apple.usbmuxd[27]: usbmuxd-268.5 on Jan 5 2012 at 03:34:01, running 64 bit
May 25 22:06:15 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
May 25 22:06:15 localhost UserEventAgent[11]: ServermgrdRegistration cannot load config data
May 25 22:06:15 localhost UserEventAgent[11]: get_backup_share_points no AFP
May 25 22:06:15 localhost systemkeychain[59]: done file: /var/run/systemkeychaincheck.done
May 25 22:06:15 localhost configd[14]: ioctl(SIOCGIFCAP) failed: Device not configured
May 25 22:06:16: --- last message repeated 1 time ---
May 25 22:06:16 localhost mDNSResponder[37]: D2D_IPC: Loaded
May 25 22:06:16 localhost mDNSResponder[37]: D2DInitialize succeeded
If you want me to post the kernal log, I can do that next if nothing in here points anyone in the right direction. FYI - the system booted normally this morning after shutting it down overnight. -
IMac won't start due to power outage
A transformer blew here in town the other night, and we lost power. Prior to that, there were two other power outages due to weather, but my iMac recycled and turned on fine after that. Now it won't turn on at all. Yes, I have read through all of the discussions prior to adding this discussion:
1. Unplugged the cord from the surge protector, and into a wall socket, and all other cord related suggestions
2. Tried resetting the PRAM
3. No sound, no fan, nothing when I press the button
4. Unfortunately my warranty has run out
4. Should I try to reinstall the memory card or should I go ahead and take it in?
5. Any other suggestions? Help!
Thanks in advance....After the drive is erased you will have to reinstall everything. You certainly can reinstall Tiger from the OS X installer DVD. When the OS is reinstalled, all the bundled software is also reinstalled, including Safari and iTunes.
As to whether anything can be done short of reformatting, that depends on the tools you have. A heavy duty utility may be able to repair the files and the drive. But it depends on what is wrong with the drive. If the cause is simply 'over-crowding' or bad sectors on the drive, i.e. too much stored on the drive or physical damage of the drive, it is possible to retrieve some or even all of the data. But, as you have discovered, Disk Utility cannot do this. -
HP Officejet 6500 won't print black after power outages
We experienced a series of power outages last night. Now the black won't print at all. The print cartridge is fairly new, about a month old, scarcely used. All the color cartridges will print.
I've tried cleaning the print heads and running the alignment tests, but nothing can produce any black ink. For a pure text page with just black lettering and nothing else, the printer goes through the motions but nothing is printed.
I have a feeling that the power outages tripped it up somehow. Is there a way to undo this?
thanks in advance@Kenteeple and @oli22 If you make a copy, will that print black?
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Exchande mailbox database is not getting mounted automatically after server is up
Hi,
Our exchange server is configured as follows:
- DAG with two Exchange Mail box servers member.
- Each server is mounted to mailbox database(m1-db & m2-db respectively) and the replication is activated on both server
My question is when one of the server goes down , the other server will take over but after the second is back online, the database which reside on it is not mounted automatically and both dbs are showing healthy status.
To resolve this issue we have to activate it manually.
Is there any solution or configuration to be performed to make the mounting occurs automatically.
RegardsDoes it happens to all the Database on that server?
What is the activation preference you have set?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
IMac won't boot after power outage
I got a power outage a couple of hours ago. And now my iMac won't boot. When I power it up, it gets pass the white screen with the apple logo. The screen than turns blue with a spinning cursor. The cursor spins for about 10-15 minutes and stops but the normal login screen never appear and it won't boot into the desktop either. I just got a blue screen.
I have boot into the install Disc1 and did the disk repair and premission repair but it didn't help.
Any idea?
SidneyOh man, what a disaster!
I tried to do an Archive and Install but the installation hanged at the end of disc 2 after running an iWeb script (according to the install log) with about one minute left. I have waited for two hours but it just hanged there with all the drives spin down.
To make the problem worse. There was no way to quit the install at that point because all the menu items were disabled. The only way out was to power off. But when I powered it back on, it booted right into install directly asking for the disc 2. If I put the disc in it will install again and hang at the same spot.
Disc 2 contains iLife. I know Apple wanted to make things simple but why can't they give me an option to skip it? After all, iLife was already installed.
I finally got it working by booting from disc 1 and did a clean install. It took me all night to re-download all the updates and reinstall many applications. Fortunately, I have my address book, calendar, and most of my works backed up to .Mac so it wasn't a total lost.
On the bright side. Now my iMac is working better than before. I used to have problem getting auto sleep to work but now it works perfectly. Safari also had problem accessing charts (but Camino was fine) in a few web sites like schwab.com. Now everything works.
Lenn and David. Thanks for all your helps.
Now I am looking for a better backup solution so that the recovery won't be this painful if disaster strikes again. Any suggestions?
Sidney
Maybe you are looking for
-
How do you add a field to the address of a contact?
YYou used to be able to add an extra line to an address. I cannot now do that. How can you with iOS 8?
-
Enhanced Podcast question(s)
I used SoundtrackPro to create an enhanced podcast. I shows up in iTunes as one long track (with chapters and graphics embedded) pretty much how I intended it show. However 1) I'm not sure how to access the url links that I embedded in it as well (I
-
Capture performance metrics across multiple servers
Hello. I'm still very new to Powershell but anyone know of a good Powershell v.3 -4 script that can capture performance metrics across multiple servers with an emphasis on HPC (high performance computing) and gen up a helpful report, perhaps in HTML
-
PI7.0: Problem about openning alert configuration in RWB
Hi experts, I encounter a problem about alert configuration. I have defined the alert catogory in WAS ABAP and use the report RSALERTTEST to test it. It's OK. Then I logon RWB and click u201CAlert configurationu201D,system popup a login window.
-
Missing printer drivers - can't add new drivers
I printed without any problems yesterday. Last night, I applied the latest drivers via Software Update (a lengthy list that just came out within the last week, including 10.4.8) and now all my printer drivers are gone. I have 2 printers connected dir