Power PC applications not supported by Mountain Lion OS?

I recently upgraded to Mountain Lion OS and my existing Microsoft Office 2004 applications on my MacPro are no longer supported. Would more recent versions of Microsoft Office be supported by ML OS or not?

Mountain Lion supports Microsoft Office 2008 and 2011.
(84406)

Similar Messages

Power PC applications not supported

I get a "power PC application not supported" when I try to open migrated files from my old mac to a new one, Any suggestions?

If you still have any legacy PowerPC software that you were using with your old Mac, it will no longer operate under OS X 10.7 LIon or OS X 10.8 Mountain Lion.
OS X 10.6 Snow Leopard was the last OS X version to support and run legacy PowerPC Mac software under the PowerPC emulator software Rosetta.
Rosetta is no longer a part of newer versions of OS X.
So, if you have any old applications that you still use, you will need to upgrade these to new Intel CPU compatible application versions.

MacPro1,1 not supported by Mountain Lion. I want 10.7 Lion server.

I have a MacPro1,1 not supported by Mountain Lion. How do I now upgrade my Lion machine to 10.7 Lion server? I can no longer find it in the Mac App Store.

You have to call 1-800-MY-APPLE to order Lion. They will send you a code by email your Apple ID is registered to so you can download it from the MAS. More then likely the same goes for Lion server as that is not showing on the MAS either. But you will have to check on the server product when you call.

I upgraded to mavericks on macbook air now when trying to open iTunes it says power pc applications not supported

i upgraded to mavericks on macbook air now when trying to open iTunes it says power pc applications not supported

Drag the newer iTunes icon from the Applications folder to the Dock and remove (control key / Options) the older version.

The files are on a volume that does not support Trash- Mountain Lion CC-Lr5

I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD. I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it? Thank you

Hello,
This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
Hope this helps:

Why is the Power Pc application Not supported on Maverick?

The MS product is not supported on Maverick Why?

Here is the summary I often post to answer your question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 7 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion and now the "free" Mavericks.

Help! my EFI System update says not supporting for mountain lion system! Why is that so? and i check my bios and boot rom version but still this happening? why is this happeneing and i cannot open hardware test?!

hello people i folow the steps of hardware test opening thing while starting up, but since i instaled mountain lion its not showingup!? why the **** is that so?!

Then it's not for your model MacBook Pro.

Power pc applications not supported with lion

I just installed Lion and now I am getting a message that I ca't open my Adobe Photoshop Application CS because PowerPC applications are no longer supported, PLEASE HELP ME SOLVE THIS PROBLEM!!!!!!!

3brats wrote:
I just installed Lion and now I am getting a message that I ca't open my Adobe Photoshop Application CS because PowerPC applications are no longer supported, PLEASE HELP ME SOLVE THIS PROBLEM!!!!!!!
It has been very widely reported that Rosetta support was being dropped. Adobe CS4 and CS5 work fine and I think I have seen reports of CS3 working as well. Your programs that are not working are well out of date and if they are that imortant to you then revert to Snow Leopard with your SL Time Machine backup.
https://discussions.apple.com/message/15752217#15752217
And to the other poster, I haven't seen anybody use Real Player for so long, I'd forgotten about it. A much outdated and unsupported program that was superseeded years ago by many superior audio/visual programs.
Good Luck

Power PC applications not supported by Mavericks?

Why does mavericks disable remote desktop, CS2, and other applications?

Links to go with MlchaelLAX suggestion.
Parallels
VirtualBox
VM Fusion
Snow Leopard server for use with the above. Call 1-800-692-7753 and order part number MC588Z/A. Cost is $19.99 + sales tax and shipping.

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

Consider running your Adobe and AppleWorks software in Snow Leopard (with Rosetta) installed in Parallels in Lion or Mt. Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Logic Express not working on mountain lion!

i am having problems with logic express 9.0.0 which is not running on mountain lion 10.8.2.
i have made an attept to try and get newer updates but before it gets anywhere this pops up
   " An eligible Logic Express Version was not found in
     the Applications Folder. This Update requires Logic
     Express version 9.0 or higher. "
(i do not have the logic disks at hand)
          The message that pops up when i attempt to open logic
               " you cant use this version of the
                application "logic express" with this
               version of OS X.
          you have "logic express" 9.0.0 "
please help!!

Hi
First, you are going to need v9.1.7 or later with Mountain Lion (http://support.apple.com/kb/HT5421)
Second
To get the updaters to work several things MUST be correct:
The Logic Application must be named "Logic Pro" or "Logic Express" (depending on which type you are working with) with NO Additional spaces or numbers in the name.
The application must be at the root level of the Applications folder (and NOT anywhere else).
CCT

USB/Flash support for Mountain Lion

What App is availiable on app store as USB support for mountain lion? There was one 'USBmate'. Is it okay? If not please tell me how to get the USB support. I have downoaded installation of ML but have not installed it because backups have to be on external HDD. Please help me.

I don't know to what you are referring. I think you mean a bootable USB flash drive for installing OS X. If so, then know there is no such thing for Mountain Lion. There was for Lion, but it is no longer available. Apple never included any installer disc for computers with Lion or Mountain Lion pre-installed.
Reinstalling Lion or Mountain Lion is done through the Internet Recovery - OS X (Lion/Mountain Lion)- About OS X Recovery.
If you download Lion or Mountain Lion from the App Store you can save the installer application and make a bootable installer from it:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process.

SQL Server Reporting Services SharePoint Integrated mode - Power View is not supported

Hi there,
My environment is the following:
SharePoint Server 2013
SQL Server 2012 SP1 Enterprise edition
I am getting the following message when trying to open BISM item with PowerView icon:
"The feature: "Power View" is not supported in this edition of Reporting Services."
My problem is that the first time I installed SQL Server Reporting Services SharePoint integrated, I used the SQL Server 2012 Standard edition ISO. But then I learned that Power View is only available with Enterprise and BI editions. So I uninstalled Reporting
Services Add-in from Control Panel, Reporting Services from the installation media and deleted the three Reporting DBs in the SharePoint DB server.
Then I used SQL Server 2012 SP1 Enterprise media to install again Reporting Services but not sure why I am still getting the message:
"The feature: "Power View" is not supported in this edition of Reporting Services."
Anyone can advice me what could be the problem? Maybe I have not complete deleted the previous SQL Server Reporting Service Share Point integrated mode from the previous installation? What would be the proper way to uninstall Reporting Services?
Any help will be welcome.
Thanks and best regards,
Joss

Hi Joss,
I am in the same situation,
SQL Server was installed in the standard mode because of that the powerview option is not working.
I have changed teh edition using maintenance --> upgrade edition. the sql server components like DB engine, SSAS and integration services are now showing in enterprise edition. The reporting services are installed from the application end still showing
as the reporting services are standard.
we reinstalled the reporting services but still persists the issue.
suggest me is there any work around to fix the issue other than reinstalled the whole SQL Server.
Thanks
Ramu

In SharePoinr 2013. Unsupported Reporting Services Functionality The feature: "Power View" is not supported in this edition of Reporting Services.

Hi,
I am getting the below error which click "Create Power View Report" option in "Power Pivot Gallery"
Unsupported Reporting Services Functionality
The feature: "Power View" is not supported in this edition of Reporting Services.
I have uploaded "Power Pivot" excel file in "Power Pivot Gallery".
It is frustrating like anything. Can anyone help on it.
SharePoint 2013. SQL Server 2012. I have enable all the service applications success in CA.
Thanks in Advance.
Poomani Sankaran

Hi,
Please try to download the SP1 Edition of the rsSharePoint.msi
file and install it. You have to install the SP1 edition of RS if you are using SP 2013.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/2d2ecfae-b524-43f3-bf93-0bddfe904b75/the-feature-power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
Best Regards
Dennis Guo
TechNet Community Support

How to download but not install OSX Mountain Lion on Mavericks

Hi all
I would like to download but not install OSX Mountain Lion on my MBP which is currently running OSX Mavericks.
This however seems impossible. I think OSX Mavericks were already installed on my MBP and therefore it seems "impossible" to download it.
Now, why would I to do this? The answer is quite reasonable, due to certain demands related to an application portfolio I need Mountain Lion, because the portfolio is not upgraded to run on Mavericks. And, it is more reasonable to downgrade a version of OSX, rather waiting for the portfolio upgrade which can take years.
Yes, I need to downgrade my secondary MBP which also came with preinstalled Mavericks. This can be done, if I only could download but not install Moutain Lion.
It should be easy enough; download Mountain Lion, make an installer and make a bootable thumb usb stick. Then erase Mavericks and install Mountain Lion.
I have previously bought Mountain Lion so it is accessible to me in the App Store, but whenever I try to hit the Download button, I get a message saying this can't be done, since I am running Mavericks.
This bugs me, it should be obvious users needs the flexibility to swap whatever OSX version they need. It is still software.
So, how can I download but not install Mountain Lion on my newer MBP that came with preinstalled Mavericks?
I would like to see answers like:
"In order to get this to work, you first have to disable the locking mechanism in [...] " instead of "No, this is impossible to do"
Regards

Thanks for your reply Eric
Can't help wondering thought, people are ok with this?
Basically Apple are saying: "Do not attempt to install an older version of OSX which came preinstalled. If so, expect multiple failures." Really?! Has it always been so? For me it's not like I'm going to install Snow Leopard on my Late 2013 Retina MBP, but I would expect some form of backward compatibility between the previous version and it successor. Apparently this is not possible, and how is this even acceptable?
Personally, I am not going to downgrade, as if I had a choice, but I would and I expected however, the possibility to at least download the previous OSX version. What do you do if you have bought several applications, not necessarily online from App Store and buy yourself a new Mac with preinstalled Mavericks and after installing your "old" applications they fail to work properly? What do you do since downgrading apparently is not an option. So... again, what do you do?
If you don't have friends with an older Mac, you could be facing serious problems. And I'm not talking about gaming, but serious business.
I find this quite disturbing actually, and please tell me it's not so. There gotta be a way to do this?
I simply want to download the OS but I expect some registry values (like windows' registry) keeps preventing this.
It should be possible to simply download and not download and install in one operation, shouldn't it?
Regards

Power PC applications not supported by Mountain Lion OS?

Similar Messages

Maybe you are looking for