Power PC applications not supported

I get a "power PC application not supported" when I try to open migrated files from my old mac to a new one, Any suggestions?  

If you still have any legacy PowerPC software that you were using with your old Mac, it will no longer operate under OS X 10.7 LIon or OS X 10.8 Mountain Lion.
OS X 10.6 Snow Leopard was the last OS X version to support and run legacy PowerPC Mac software under the PowerPC emulator software Rosetta.
Rosetta is no longer a part of newer versions of OS X.
So, if you have any old applications that you still use, you will need to upgrade these to new Intel CPU compatible application versions.

Similar Messages

  • I upgraded to mavericks on macbook air now when trying to open iTunes it says power pc applications not supported

    i upgraded to mavericks on macbook air now when trying to open iTunes it says power pc applications not supported

    Drag the newer iTunes icon from the Applications folder to the Dock and remove (control key / Options) the older version.

  • Why is the Power Pc application Not supported on Maverick?

    The MS product is not supported on Maverick Why?

    Here is the summary I often post to answer your question:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 7 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion and now the "free" Mavericks.

  • Power pc applications not supported with lion

    I just installed Lion and now I am getting a message that I ca't open my Adobe Photoshop Application CS because PowerPC applications are no longer supported, PLEASE HELP ME SOLVE THIS PROBLEM!!!!!!!

    3brats wrote:
    I just installed Lion and now I am getting a message that I ca't open my Adobe Photoshop Application CS because PowerPC applications are no longer supported, PLEASE HELP ME SOLVE THIS PROBLEM!!!!!!!
    It has been very widely reported that Rosetta support was being dropped. Adobe CS4 and CS5 work fine and I think I have seen reports of CS3 working as well. Your programs that are not working are well out of date and if they are that imortant to you then revert to Snow Leopard with your SL Time Machine backup.
    https://discussions.apple.com/message/15752217#15752217
    And to the other poster, I haven't seen anybody use Real Player for so long, I'd forgotten about it. A much outdated and unsupported program that was superseeded years ago by many superior audio/visual programs.
    Good Luck

  • Power PC applications not supported by Mountain Lion OS?

    I recently upgraded to Mountain Lion OS and my existing Microsoft Office 2004 applications on my MacPro are no longer supported.  Would more recent versions of Microsoft Office be supported by ML OS or not?

    Mountain Lion supports Microsoft Office 2008 and 2011.
    (84406)

  • Power PC applications not supported by Mavericks?

    Why does mavericks disable remote desktop, CS2, and other applications?

    Links to go with MlchaelLAX suggestion.
    Parallels
    VirtualBox
    VM Fusion
    Snow Leopard server for use with the above. Call 1-800-692-7753 and order part number MC588Z/A. Cost is $19.99 + sales tax and shipping.

  • SQL Server Reporting Services SharePoint Integrated mode - Power View is not supported

    Hi there,
    My environment is the following:
    SharePoint Server 2013
    SQL Server 2012 SP1 Enterprise edition
    I am getting the following message when trying to open BISM item with PowerView icon:
    "The feature: "Power View" is not supported in this edition of Reporting Services."
    My problem is that the first time I installed SQL Server Reporting Services SharePoint integrated, I used the SQL Server 2012 Standard edition ISO. But then I learned that Power View is only available with Enterprise and BI editions. So I uninstalled Reporting
    Services Add-in from Control Panel, Reporting Services from the installation media and deleted the three Reporting DBs in the SharePoint DB server.
    Then I used SQL Server 2012 SP1 Enterprise media to install again Reporting Services but not sure why I am still getting the message:
    "The feature: "Power View" is not supported in this edition of Reporting Services."
    Anyone can advice me what could be the problem? Maybe I have not complete deleted  the previous SQL Server Reporting Service Share Point integrated mode from the previous installation? What would be the proper way to uninstall Reporting Services?
    Any help will be welcome.
    Thanks and best regards,
    Joss

    Hi  Joss,
    I am in the same situation, 
    SQL Server was installed in the standard mode because of that the powerview option is not working. 
    I have changed teh edition using maintenance --> upgrade edition. the sql server components like DB engine, SSAS and integration services are now showing in enterprise edition. The reporting services are installed from the application end still showing
    as the reporting services are standard.
    we reinstalled the reporting services but still persists the issue.
    suggest me is there any work around to fix the issue other than reinstalled the whole SQL Server.
    Thanks
    Ramu

  • In SharePoinr 2013. Unsupported Reporting Services Functionality The feature: "Power View" is not supported in this edition of Reporting Services.

    Hi,
    I am getting the below error which click "Create Power View Report" option in "Power Pivot Gallery"
    Unsupported Reporting Services Functionality
    The feature: "Power View" is not supported in this edition of Reporting Services.
    I have uploaded "Power Pivot" excel file in "Power Pivot Gallery".
    It is frustrating like anything. Can anyone help on it.
    SharePoint 2013. SQL Server 2012. I have enable all the service applications success in CA.
    Thanks in Advance.
    Poomani Sankaran

    Hi,
    Please try to download the SP1 Edition of the rsSharePoint.msi
    file and install it. You have to install the SP1 edition of RS if you are using SP 2013.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/2d2ecfae-b524-43f3-bf93-0bddfe904b75/the-feature-power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
    Best Regards
    Dennis Guo
    TechNet Community Support

  • "The feature Power View is not supported in this edition of Reporting Services" after installation of November CU for SharePoint

    We had deployed Reporting Services / PowerPivot /Powerview for a customer and everything was tested and appeared to be working fine . However after installing the November CU we now get the following error :
    "The feature Power View is not supported in this edition of Reporting Services"
    Initially PowerPivot wasn't working either but that got resolved after re-installing the rssharepoint and sppowerpivot msi files. Has anyone faced this issue?

    Hi,
    According to your description, my understanding is that the PowerView not work after installing the November CU Updates.
    I check the November CU updates, it have no affects on the PowerView or PowerPivot.
    The reason for this issue may occur when the PowerPivot Service Application is not running after installing the CU updates.
    Here is a detailed article for your reference:
    http://support2.microsoft.com/default.aspx?scid=kb;EN-US;2889944
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

  • While I tried to open I-photos on my MAC it says " can't open application not supported by this mac"?

    While I tried to open I-photos on my mac it says " can't open application not supported by this mac"?

    Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
    Safe mode is much slower to start up than normal.
    When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t start in safe mode. In that case, ask for instructions.

  • Can not open Firefox application - not supported on this archetecture

    I have been able to use Firefox in the past, but when I tried upgrading to FireFox 4, I get an error msg: that it is not supported on this architecture.

    Today, I have a new test result that the user account is allowed to access internet, but still can not access D drive.
    The user can not change the IE's internet temporary files location.
    I can not open the flex application from yahoo server.
    Is there any method to execute flex application without temporary files support?
    Thank you very much.

  • Application Not Supported on This Architecture

    Hey,
    I'm having problems opening applications I have downloaded. Whenever I open applications such as "Firefox" and "Minecraft", and others, an error message shows up with the following: "You cannot open the application "App Name" because it is not supported on this architecture."
    This has started ever since I updated my iBook G4 1.2 GHz PowerPC G4 10.4.11 to 10.5.8. These applications worked fine before the update. I would think more applications would work, after the upgrade... Any help?

    If the applications you were running under 10.4.11 were running in the classic environment, you lost that when upgrading to 10.5 Leopard.  Otherwise, the latest Firefox version for the PowerPC is version 3.6 and is located here.

  • Organizer applications not supported

    Hello,
    I recently upgraded my PC (Windows 7/Microsoft Office 2010) and have installed the latest version of BlackBerry Desktop Software v7.1.  The smartphone (Torch 9810) and the PC recogonize each other however when I go to configure the organizer settings a message pops up saying "The organizer applications on your computer are not supported".  I am trying to configure Microsoft Outlook 2010 however it seems like it doesn't know it's there.  I have unistalled and reinstalled the Desktop software, rebooted numerous times and the message keeps popping up.
    Any ideas?
    Thanks.

    Hi and Welcome to the Community!
    Since you say it's 2010, this KB came to mind:
    KB24040 Support for Microsoft Office 2010 Click-to-Run installation
    See if that applies.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Oracle BAM Web Applications not supported by Firefox and Chrome browsers

    Hi,
    1) To enable Oracle BAM in a BPM project, when a project data object is marked as a business indicator, the Process Engine stores
    its value in the BAM and DataMart databases, as explained in the documentation. So, How can we use this information to monitor the process activity? Is there any detailed documentation or a sample?
    2) Does Oracle BAM Web Applications still not supported by the browsers Firefox (3.5 and 3.6) and Google Chrome?
    Tahnks. Regards,
    Hanine

    Hanine,
    The business indicators can be used when creating your data objects in BAM Architect and BAM Active Studio.
    The BAM tools still require Internet Explorer only.
    Heidi.

  • "Application not supported" but only in Managed Preferences

    Using  Server 10.9.1  and OSX 10.9.1.
    If I open the client computer locally and go to Applications, I can launch the application.
    However if I log in as a networked user with managed preferences, the application is greyed out and I get the "You can't open the application because it is not supported on this type of Mac".
    there are no other copies of the aplication on the server.  I have

    Posting got cut off.. sorry.
    There is only one copy of the application on both the Server and the Client.
    Any ideas?
    Thanks
    Mitch

Maybe you are looking for

  • How to create a variant selection screen

    Hi experts, Can you tell me " How to create a variant selection screen ". Please it's urgent......... Thanks Basu

  • LR 4.4 Import Issues - Missed a Cure?

    Hello Everyone, Since upgrading to 4.4, I have experienced a number of new issues. 4.3 was solid as a rock in comparison.  4.4 is causing me to need to manually terminate and/or restart the application numerous times daily, sometimes numerous times h

  • No Internet Connectivity Following Windows 7 Critical Update August 19th 20112

    I experienced a Windows 7 automatic update (Downloaded and installed August 18th 2012 - evening) and when I attempted to access the internet on August 19th, I had no connectivity. Issue is not with wifi or service provider since another laptop functi

  • 5g with Mac and Windows?

    Can I use my 5g ipod with both a Mac and Windows PC? I've been syncing with my Mac but I also have a PC. I downloaded the Ipod updater for Windows XP and installed it. When I connect my Ipod I receive a message that the Ipod cannnot be read and needs

  • Administrative console doesn't seem to work

    I've just installed appserver7 on windows 2000 professional sp2. (256mb, P3 733MHz). Everything seems to work quite fine, application server and administrative server are up. I can connect to localhost:4848, will be asked for passw and login, can get