Power PC not supported

I am sure this comes up often, so I apolgize for doing it again but here goes. Just got a new iMac, trying to install Logic Pro 8, and I get PowerPC not supported.
Is it impossible to install this older software into my new iMac?
I used Logic Pro 8 on my older MacBook Pro, And I would like to use it on my new desktop iMac. I believe it can be liscenced on 2 computers. If it is possible, please help.  If not, sigh...ugh, any suggestions, other than buying the newer Logic Pro 9. Thanks.

Lion does NOT have Rosetta. Hence Lion is no longer capable of executing PowerPC code which is what the error message is attempting to tell you. You are going to have to upgrade your software to a newer version that is written using Intel code. So there is no other suggestion other then buying Logic 9.
Allan

Similar Messages

  • I'm trying to get music from an external lacie hard drive imported onto my iMac. I cannot open the Lacie drive since it says 'power pc not supported'. Any ideas here?

    I am trying to import mp3s from a lacie external hard drive onto my iMac. They were saved from a dell running windows. My iMac says "power pc not supported" when I connect the lacie drive. Any ideas here, I have about 25GB of music I'm trying to save. thanks

    Do not move the music yourself.
    http://docs.info.apple.com/article.html?artnum=301748

  • Y50-70 Power Adapter not Supported.

    Hi there. I just bought lenovo y50-70 from newegg. And i had a problem it's a "adapter is not supported" the power adapter does not match up with the computer and cannot supply power" when my laptop is on it doesn't charge and shows above that message when its off it charges very strange. Also i tried uninstalled the energy managment reinstalled, i tried things this topic. And 1 thing is cant remove the battery because its in inside.(i have a warranty but i'm outside of US) Please help me and thank you very much. 

    Hi Gantumur,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with power adapter not supported by your Lenovo Y50-70 laptop.
    Try to reinstall the power management as this might resolve the issue, if still the issue persist then check for the pins as it might have been damaged.
    And also check if the port is damaged. If still the issue persist, I would like to suggest you to visit the nearest service centre for further details as this might be issue with the adapter.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why is the power nap not supported by my 2012 macbook pro 13" ?

    I tried to download the power nap update from the apple website but it keeps on saying to me that my laptop is not supported.
    I just downloaded the OS X mountain lion. I read in the website that it is supported by macbook pro (retina. mid 2012) does this mean that it is only for macbook pro with retina display? if so then why is it available to macbook air?

    It's only available on the 2011, 2012 MBair and the MBpro retina.

  • Creative Suite download V power pc not supported

    I have an old copy of adobe creative suite premium education but my mac gives me the prompt power pc products not supported when I try to download.  Please can anyone advice is there anything I can do to get round the problem - change settings, download some first??????  Thanks from a not so great IT person.

    No. Adobe can't fix what Apple doesn't support any longer. You need new software.
    Mylenium

  • Setting up Lacie external storage setup assistant not available.  "Power pc not supported"

    Trying to set up a Lacie Quadra d2 external drive.  The Lacie setup assistant will not operate.  The macbook error reads "PowerPC no longer supported".  How can I set up this storage device?

    PPC applications are not supported by OSX's from 10.7 and up.  I suspect that you will have to reformat the HDD but the best option is to contact Lacie technical support and get a definitive answer from them.
    Ciao.

  • HP Z400 Workstation Power Supply not Supported

    Good Day All,
    I would like to seek help on the issue that i am currently facing.
    Currently, I am using an HP Z400 Workstation and decided to switch to a bigger casing. I Bought a Full tower and casing and just realized that i am unable to move the power supply (425 Watts) as well due to the cables are too short to reach the CPU main Powers.
    So I bought a separate Power Supply (Cooler Master M2 Silent Pro 850 Watts).The cables are perfectly enough to reach the CPU main power source. After putting everything the pc won’t turn on……
    I thought my newly power supply was defective and got a replacement at the same day. I tried the new Power supply and simply does not want to turn on… this is getting frustrating as I am unable to figure out what is really causing the issue.
    I also tried to just plugging the cables at the Main power and removed all the additional devices just to test but still no luck….
    I started checking forums… there is only one post regarding about unable to change any other third party Power Supply for this HP Z400 Workstation. I guess it apply to all HP Branded as well as Dell.
    Guys I need your help as I don’t want to make a mistake again on considering to build another machine just because this one was not working… Maybe there is one there that manages to bypass or have a resolution on how I can successfully upgrade my Power supply using the same HP Motherboard.
    Here is my Current Specs..
    Processor
    Intel® Xeon® Quad-Core Processor W3565 (3.20 GHz, 8 MB cache, 1066 MHz memory)
    Chipset  Intel® X58 Express
    Here is the link for the full details of the specs
    http://www8.hp.com/sg/en/products/workstations/product-detail.html?oid=3718668
     Here is the power supply I want to replace http://h20464.www2.hp.com/results.htm?SID=3718668&MEID=368CA2BE-30F2-40AE-8929-DBF4AF2ADC21
    Will wait for your kind reply,
    Thanks

    The reason it won't turn on is because pins 21 and 23 are not in the standard ATX PSU configuration. Your motherboard works with an HP configured ground on pin 21 and +12 VDC instead of the ATX  (ATX12V v2.01)standard unused pin and +5VDC respectively. 
    Z400 PSU connector
    Standard ATX PSU connector
    I have not seen a non HP PSU available that would work without modification.  
    Not all HP's are built with propietary PSU connections most newer, non-business models use the standard ATX PSU configuration.  
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Reloading CS4 Creative Premium from Box set. says"Power PC not supported.

    I'm using same Intel iMac as before, I just wanted to rebuild the hard Drives. I had the old copy of CS4 on other partition. trashed it, and reinserted discs to rebuild new on "New Partition" Down Hill from there
    First would not accept my serial # then last try the disc instal has a line through it saying
    "You can't open the application Install, Adobe Creative Suite.app because PowerPC applications are no longer supported."
    Have used on this iMac fo years. What's the catch?
    Thanks for any help

    CS4 Design Premium and Web Premium are supported on PowerPC G5 or multicore Intel processor. Check the link for more information.
    http://helpx.adobe.com/creative-suite/kb/system-requirements-cs4-point-products.html#main_ MacintoshSystemReqs

  • I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out.  I need these programs.  How do I proceed?

    I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks.  How do I proceed to get these programs back?

    Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • Power view couldn't load the model or data source because the data source type is not supported

    Hi,
    I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
    Power view couldn't load the model or data source because the data source type is not supported.
    Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
    Thanks in advance

    What type of SSAS install are you using?
    PowerView in Excel 2013 currently only supports Tabular data sources.
    Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
    http://darren.gosbell.com - please mark correct answers

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • SQL Server Reporting Services SharePoint Integrated mode - Power View is not supported

    Hi there,
    My environment is the following:
    SharePoint Server 2013
    SQL Server 2012 SP1 Enterprise edition
    I am getting the following message when trying to open BISM item with PowerView icon:
    "The feature: "Power View" is not supported in this edition of Reporting Services."
    My problem is that the first time I installed SQL Server Reporting Services SharePoint integrated, I used the SQL Server 2012 Standard edition ISO. But then I learned that Power View is only available with Enterprise and BI editions. So I uninstalled Reporting
    Services Add-in from Control Panel, Reporting Services from the installation media and deleted the three Reporting DBs in the SharePoint DB server.
    Then I used SQL Server 2012 SP1 Enterprise media to install again Reporting Services but not sure why I am still getting the message:
    "The feature: "Power View" is not supported in this edition of Reporting Services."
    Anyone can advice me what could be the problem? Maybe I have not complete deleted  the previous SQL Server Reporting Service Share Point integrated mode from the previous installation? What would be the proper way to uninstall Reporting Services?
    Any help will be welcome.
    Thanks and best regards,
    Joss

    Hi  Joss,
    I am in the same situation, 
    SQL Server was installed in the standard mode because of that the powerview option is not working. 
    I have changed teh edition using maintenance --> upgrade edition. the sql server components like DB engine, SSAS and integration services are now showing in enterprise edition. The reporting services are installed from the application end still showing
    as the reporting services are standard.
    we reinstalled the reporting services but still persists the issue.
    suggest me is there any work around to fix the issue other than reinstalled the whole SQL Server.
    Thanks
    Ramu

  • In SharePoinr 2013. Unsupported Reporting Services Functionality The feature: "Power View" is not supported in this edition of Reporting Services.

    Hi,
    I am getting the below error which click "Create Power View Report" option in "Power Pivot Gallery"
    Unsupported Reporting Services Functionality
    The feature: "Power View" is not supported in this edition of Reporting Services.
    I have uploaded "Power Pivot" excel file in "Power Pivot Gallery".
    It is frustrating like anything. Can anyone help on it.
    SharePoint 2013. SQL Server 2012. I have enable all the service applications success in CA.
    Thanks in Advance.
    Poomani Sankaran

    Hi,
    Please try to download the SP1 Edition of the rsSharePoint.msi
    file and install it. You have to install the SP1 edition of RS if you are using SP 2013.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/2d2ecfae-b524-43f3-bf93-0bddfe904b75/the-feature-power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight???

    Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight??? It started when I tried to upgrade current flash player and it said I needed to uninstall current version, which I did, and then it wouldn't download the current one giving me the not supported story! Please help!!!!!!

    Hi Andy, that is correct, they don't support PPC Macs anymore.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or smaller here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    Or free 3rd party...
    http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

  • CS2 is not supported in OSX mountain lion - how do I get an update for power pc?

    My CS2 has a white line through the icon and a message says this application power pc Adobe photoshop is not supported. Is there a download for fix?
    Thanks

    No. You need to buy a new license.
    Mylenium

Maybe you are looking for

  • Can't edit an event in my Calendar.

    Yesterday I noticed that I can't edit an event in my Calendar. Also when I type a new event it drops some of the type off when I hit return. And it's not necessarily dropping off the end of the sentence! I'm using OSX10.8.5. The only thing that's dif

  • Can i lock rotation in iphone 4s

    can i lock rotation in iphone 4s

  • Wireless Java App on Pocket PC

    Hi everyone, I'm a newbie. I have a Pocket PC running Windows Mobile 2003. If I want to write a wireless application using Java, what do I need to have in term of software requirement? I browsed other threads and many people wanted to do the same thi

  • Aperture 2.1.2 keeps crashing at startup

    Hi I've run disk utility and repaired permissions but Aperture keeps crashing when I try to run it I get the following error message... Process: Aperture [218] Path: /Applications/Aperture.app/Contents/MacOS/Aperture Identifier: com.apple.Aperture Ve

  • How to generate soap header using java code

    Hi, I need to generate the following soap header using java DOM. Can you send me some java code snippet to do so? <soapenv:Header> <api:RequesterCredentials soapenv:mustUnderstand="0" xmlns:api="urn:ThinkPod:api:ThinkPodAPI" xmlns:ebl="urn:ThinkPod:a