Power Percentage is not correct at all (1981374893%)
I have an Apple Magic Mouse and Keyboard connected via bluetooth to my Macbook.
They usually show a normal percentage 1-100%, but lately it has been showing a totally bizarre 1238753298758932% on both. They change every now and then. I've tried reconnecting them. Removing them from devices and then reconnecting them. Restarting. Nada works.
Here's a pic to show you what I mean.
http://i47.tinypic.com/2yjvnef.png
Hi,
I have cancelled your subscription of Export Pdf for the order no. AD001853934FR.
Your refund no.is 66175849.
You will get the refund in 7 business days.
Regards,
Florence
Similar Messages
-
Iphone 4 slide to unlock and slide to power off will not work but all other touch features work
Iphone 4 slide to unlock and slide to power off will not work but all other touch features work properly
You will have to get it serviced.
-
My power adapter is not working at all
Hello
Recently, my power adapter has stopped working. I'm down to 33% battery power and no way to recharge! If I unplug the adapter and plug it directly into a wall outlet (grounded), it still does not work. No light on the adapter plug at all.
What's up here? How do I fix this? Please help!
------------SIf it won't switch on, and assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
As I mentioned above I have three pc's all running win7 and firefox 6.02. On this box website fonts are different than the others. All of the "option" settings are identical on all of the boxes. Including "allow pages to choose their own fonts". I uninstalled 6.02 and installed 5.0 but there was no difference. So I reset to 6.02.
The pages look fine in IE.
Please advise.That change needs to be made to the CSS file that is on the web server.
So if you use a CSS file or have the CSS code in the main HTML file then add <b>font-stretch: condensed;</b> to all CSS rules that have a ''font-family: "Arial Narrow";''
If you do not have access to the page code and can't modify it then there is not much that you can do.
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25 -
Date and time mentioned in my mails are not correct.Similar date for all mails
The date and time shown in my mails are not correct for all the mails its showing 31/5/12 but these mails were received on 1/11/14.
Incorrect date or time displayed in various applications
-
T440p Fingerprint power-on is not working
Hi , i just recieved my new T440p , Fingerprint @ power-on is not working although all config. is done typically in lenovo fingerprint manager pro & fingerprint security settings in the BIOS , i start my laptop it goes through windows normal startup & logon without any request for fingerprint .
Solved!
Go to Solution.Dear Ahmad
Welcome in lenovo community
Have you tried to first to enroll your fingers first , an application called Lenovo Think Vantage should be installed .
Do you have this application installed ?
Also you need to check the device manager , it's better to send us a screen shot of it .
Let us know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Power/lock button not working, function moved to volume up
I just had my phone revived after water damage (so I'm half part on taking it to SCS because i read that the warranty will be voided if the LDI has changed its colors). Now everything is working except for the backlight flickering when auto light adjust is on especially when the backlight is low. And the other one which is serious. The power button is not functioning at all. And I discovered that when pressing the volume up, the volume would increase but after a very very short delay, the turn off/airplane mode selections would appear which would only appear when the power button would be long pressed right? And when the screen has gone to sleep, the volume up would also unsleep the screen.
The worst part. I can't let my phone dead battery, cause it automatically turns on and the hard reset button on the sim slot has no effect on it. But the power+volume up combo trick works, but the thing is, you only need to click the volume up for this to happen. Is there any quick or permanent fix for this before I go to the SCS, I'm afraid they will void the warranty of my phone and pay for a fix price cause I don't have the money.Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
To me, it sounds more related to a hardware issue. Thereby, it's nothing that you can do on your own. I suggest that you visit nearest service center to have your phone examined by a technician. You can contact your local support team for further information about nearest service center and/or how to proceed with this in the best possible way:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
SG300-28P - POE not correctly supported on all ports - possible firmware or hardware issue
So, I spent some time this weekend troubleshooting the issues I've had with the new SG300-28P switch and POE to many of my devices in the office. As a recap, I cannot utilize all of the 24 POE ports on the switch for POE purposes. Really only every other port [with a few odd combinations thrown in between]. In addition, the SG300-28P switch, on occasion, is sending POE to non-POE devices [e.g. my Ruckus Zone Director 1106].
Here are my POE devices [all 802.3 af-compliant]:
3 Ruckus 7982 access points
1 Pakedge access point
2 home-automation controllers
2 Polycom voip phones
I called Cisco support several times in regards to this problem, and they figured it was a hardware issue - a faulty switch. So, Cisco sent me a replacement SG300-28P, which I hooked up today. The exact problem still occurs. Default configuration [fresh out of the box]. No way I can land, for example, the 3 Ruckus 7982 AP's on ports 1, 2, and 3 [or ports 1,13, and 2]. I have to put them on ports 1, 3, and 5 in order for them to power up. In addition, I can't plug any other POE devices on the ports either between or below them. I had to skip another port bay. This is very odd behavior!! Two Cisco SG300-28P's in a row with the same problem.
However, I also had one of the new Cisco SG300-10P switches in my possession for a recent project of ours. I decided to hook up the same POE devices to this switch. ALL POE devices were recognized and worked! No need to skip a port. And it didn't matter what device was plugged in first or not. I am now convinced that it is either a hardware issue [bad power supply/transformer?] inside all of the SG300-28P switches, or a firmware issue.
Both of the SG300-28P switches were running firmware 1.1.2 [the latest on Cisco's website]. So, I decided to install an older firmware version on the SG300-28P switch that I'm returning [installed 1.1.1.8]. Here's what I found out. I could then plug 2 POE devices [e.g. two Ruckus AP's] in adjacent horizontal ports, but not three in a row. In addition, not all adjacent ports. It's funky. For example, I could plug an access point in ports 20 and 21, but not in 21 and 22. No rhyme or reason in how it worked. And I still couldn't plug an access point in adjacent vertical ports [e.g. ports 1 and 13]. BUT...
It's interesting that the same exact switch that would not initially allow 2 horizontally-adjacent POE ports to be utilized WOULD allow 2 horizontally-adjacent POE ports to be utilized when running a different firmware version. It's also interesting to note that when plugged into a "non-working" POE port, the SG300-28P would actually make a small whining noise. Very subtle noise; I could hear it when approx. 1ft away from the switch. The noise was not noticeable when ports were skipped [and POE actually worked]. Therefore, I believe that Cisco has some SG300-28P firmware bugs [at least in the last two versions of firmware] that is not truly allowing all 24 ports to utilize POE correctly. This problem does not exist with the SG300-10P switch.
I'm really interested to hear what Cisco's reply and findings on this matter would be. And would welcome a reply from one of their senior support team members/managers who could actually experiment with this, too. In addition, I'd like to know when they think a solution could be created if it's firmware-related. If hardware-related, I don't think I'll be recommending any 28P switches in our projects. Perhaps just the regular SG300-28 with a separate SG300-10P. It's a shame because the SG300-28P is more of a bargain when compared to the two separate components.show power inline
Port based power-limit mode
Unit Power Nominal Power Consumed Power Usage Threshold Traps
1 On 180 Watts 13 Watts (7%) 95 Disable
Port Powered Device State Status Priority Class
gi1 Auto On critical class0
gi2 Never Off low class0
gi3 Auto Searching critical class0
gi4 Never Off low class0
gi5 Auto On critical class0
gi6 Never Off low class0
gi7 Auto On critical class2
gi8 Auto Searching low class0
gi9 Auto Searching low class0
gi10 Auto Searching low class0
gi11 Auto Searching low class0
gi12 Never Off low class0
gi13 Never Off low class0
gi14 Never Off low class0
gi15 Never Off low class0
gi16 Never Off low class0
gi17 Never Off low class0
gi18 Never Off low class0
gi19 Never Off low class0
gi20 Auto Searching low class0
gi21 Never Off low class0
gi22 Auto Searching low class0
[0mMore: , Quit: q or CTRL+Z, One line: gi23 Auto Searching low class0
gi24 Auto Searching low class0
show power inline gigabitethernet xx (for each device plugged in)
Port Powered Device State Status Priority Class
gi1 Auto On critical class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is on - valid resistor detected
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 3
Invalid Signature Counter: 17583
Port Powered Device State Status Priority Class
gi2 Never Off low class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is off - user setting
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
Port Powered Device State Status Priority Class
gi3 Auto Searching critical class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is off - detection is in process
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 2
Invalid Signature Counter: 1
Port Powered Device State Status Priority Class
gi4 Never Off low class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is off - user setting
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
Port Powered Device State Status Priority Class
gi5 Auto On critical class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is on - valid resistor detected
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
Port Powered Device State Status Priority Class
gi7 Auto On critical class2
Power limit (for port power-limit mode): 15.400W
Port Status: Port is on - valid resistor detected
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
Port Powered Device State Status Priority Class
gi13 Never Off low class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is off - user setting
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 1
Invalid Signature Counter: 0
Port Powered Device State Status Priority Class
gi14 Never Off low class0
Power limit (for port power-limit mode): 15.400W
Port Status: Port is off - user setting
Overload Counter: 0
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
show interfaces advertise gigabitethernet xx (for what ports are of interest)
Port: gi9
Type: 1G-Copper
Link state: Down
Auto negotiation: Enabled
1000f 1000h 100f 100h 10f 10h
Admin Local link Advertisement yes no yes yes yes yes
Oper Local link Advertisement - - - - - -
Oper Remote link Advertisement - - - - - -
Priority Resolution - - - - - -
Port: gi10
Type: 1G-Copper
Link state: Down
Auto negotiation: Enabled
1000f 1000h 100f 100h 10f 10h
Admin Local link Advertisement yes no yes yes yes yes
Oper Local link Advertisement - - - - - -
Oper Remote link Advertisement - - - - - -
Priority Resolution - - - - - -
Port: gi11
Type: 1G-Copper
Link state: Down
Auto negotiation: Enabled
1000f 1000h 100f 100h 10f 10h
Admin Local link Advertisement yes no yes yes yes yes
Oper Local link Advertisement - - - - - -
Oper Remote link Advertisement - - - - - -
Priority Resolution - - - - - -
Port: gi21
Type: 1G-Copper
Link state: Down
Auto negotiation: Enabled
1000f 1000h 100f 100h 10f 10h
Admin Local link Advertisement yes no yes yes yes yes
Oper Local link Advertisement - - - - - -
Oper Remote link Advertisement - - - - - -
Priority Resolution - - - - - -
Port: gi22
Type: 1G-Copper
Link state: Down
Auto negotiation: Enabled
1000f 1000h 100f 100h 10f 10h
Admin Local link Advertisement yes no yes yes yes yes
Oper Local link Advertisement - - - - - -
Oper Remote link Advertisement - - - - - -
Priority Resolution - - - - - -
Port: gi23
Type: 1G-Copper
Link state: Down
Auto negotiation: Enabled
1000f 1000h 100f 100h 10f 10h
Admin Local link Advertisement yes no yes yes yes yes
Oper Local link Advertisement - - - - - -
Oper Remote link Advertisement - - - - - -
Priority Resolution - - - - - - -
My iPod will not charge at all it will when it's off it will power on and charge to a certain pint then will stop and no longer charge what is its problem I've tried 3 cords and three different outlets and also in my computer! What is wrong with it?it won't charge when it's powered on only when it s off then it turns on and stops charging?? What's wrong with it ad how much is a Genius Bar appt at apple stores??
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
I have an index page that does not correctly load css, but css works on all other pages in the site.
http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
http://www.boulderridgecondos.com/news.htm
I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
Any help or suggestions to research something would be appreciated.That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.
-
When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go. -
My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to fix this? I would like to be able to see my photos again.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Our picture transfer from iphone, ipads and or Sony DSC-W150 camera ended when we changed int providers from xfinity to frontier. All attempts to troubleshoot have not corrected problem. The only changes to the system that was functioning properly are Fios int service and router. All apple components are using the fios router. Can anyone Help get us up and running again? Thanks
How have you been making the physical connection from:
iPhone
iPads
Sony DSC-W150 camera
...to your Mac?
If WiFi, have you changed the WiFi encryption method or WiFi password? If so, each device need the new information netered into it manually to get onto your "new" WiFi Network. -
Appletv 2 flashing quickly - no reponse at all -tried to unplug power but did not work.
Appletv 2 flashing quickly - no reponse at all -tried to unplug power but did not work. What should i do?
You'll have to connect the your ATV2 to computer via micro-usb port on the back. Open itunes and put the ATV2 in DFU mode by holding down the menu and play button for 7 seconds. Itunes should recognize the device. Once it does press the restore button,itunes will then download the latest software and reinstall it on the ATV2. You will then have to go through the setup process again. If that doesn't fix the problem take it back the store you bought it at.
Maybe you are looking for
-
I want to find the vendor balance as from fbl1n?
Hi all, I am preparing a report where I need to get the vendor balance till date, for a particular employee, as I see in t-code fbl1n. Can anyone specify how can i get that in my report , where it is stored??? Also I checked out t-code pc00_m40_term,
-
DVI to ADC adaptor: Display power button no longer works w/G5?
I'm looking for answers on a topic originally brought up in this thread: http://discussions.apple.com/thread.jspa?threadID=221092&tstart=45 concerning the Studio Display's power button when attached to an ADC/DVI adapter for use on a G5. I am having
-
Hi, I am trying to load a 2 GB text file in DIAdem. This causes DIAdem to hang and I am forced to restart the software. Can it support this file size? If yes, then what is an approximate loading time? My system config is: Windows XP OS 1 GB RAM 3 GHz
-
How do i get my ipad to sink with my computer?
I had this computer cleaned off and they changed the name of it. now it says it waiting to sync with this computers previous name. how do i get it to sync with my itunes with this laptop?
-
Album thumbnails on My Albums page appearing cropped
Hi, I'm hoping someone can help with this. I'm trying to build a website using iWeb 08 and am using the My Albums feature to showcase samples of my work by type. However, for some reason the thumbnail that is being displayed for each album that I dra