Power Query increase time out time (HTTP)
Hi
I am trying to send a http request that can take 5 mins or more to process. Is there anyway to increase the time out time?
last comment ( seems to suggest it is fixed at 100 seconds for http requests)
http://social.technet.microsoft.com/Forums/en-US/258c0872-15d8-42dc-bf8f-f836d4e51c92/increase-timeout-for-net-data-provider-for-teradata?forum=powerquery
The ability to override this timeout is planned as part of the July release.
Similar Messages
-
Dear experts,
We are using Time out time setting in IP. We made it as 10 mins. we made this setting for successfully running the process chain where other events are waiting for this process to finish.
that means it has to fail if the time of IP exceeds 10 mins. But this is not failing eventhough it exceeds 10mins...what could be the reason?????
Please share ur valueble thoughts....
Thanks in advance
bhaskarBhaskar,
Waiting Time Until Status Incorrect
The system sets the traffic light in the Monitor to red if the maximum wait time has elapsed since the last IDOc entered the system for this request.
--> Using this option we can stop long running request with out any updates/idocs. This option not to stop running loads.
Hope it Helps
Srini -
Table.Join/Merge in Power Query takes extremly long time to process for big tables
Hi,
I tried to simply merge/inner join two big tables(one has 300,000+ rows after filtering and the other has 30,000+ rows after filtering) in PQ. However, for this simple join operation, PQ took at least 10 minutes (I killed the Query Editor after 10
minutes' processing) to load the preview.
Here's how I did the join job: I first loaded tables into the workbook, then did the filtering for each table and at last, used the merge function to do the join based on a same field.
Did I do anything wrong here? Or is there any way to improve the load efficiency?
P.S. no custom SQL was used during the process. I was hoping the so called "Query Folding" can help speed the process, but it seems it didn't work here.
Thanks.
Regards,
QilongHi!
You should import the source tables
in Access. This will speed up the work of
PQ in several times. -
Need to increase the Time out parameter for executing BI queries
Folks,
We are publishing BI Query on portal , we are getting Time out error while executing the quries , please let me know how to increment the time out parameter
Thanks
ManishHi Manish,
Try this link
Time out time
Cheers.... -
Sporadic issues with wireless connection (dhcpcd times out)
I'm using a wireless usb adaptor Dlink DWA 110 (chipset rt73). It can connect fine some times, but many times it times out on dhcpcd. Raising the time out time causes it to hold indefinitely on the message "offered 192.168.0.132 from 192.168.0.1". Analyzing the dmesg, I see
[ 118.065433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 507.792005] wlan0: deauthenticating from 00:1e:58:16:89:8c by local choice (reason=3)
[ 507.795984] wlan0: direct probe to AP 00:1e:58:16:89:8c (try 1)
[ 507.798617] wlan0: direct probe responded
[ 507.798622] wlan0: authenticate with AP 00:1e:58:16:89:8c (try 1)
[ 507.800482] wlan0: authenticated
[ 507.800506] wlan0: associate with AP 00:1e:58:16:89:8c (try 1)
[ 507.802986] wlan0: RX AssocResp from 00:1e:58:16:89:8c (capab=0x431 status=0 aid=6)
[ 507.802991] wlan0: associated
[ 507.816784] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
I'm writing this from an ubuntu live cd, where it works just fine. Here follows my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Bahia"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp !ipv6)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="pedro"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(dlink)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles cups dbus hal netfs crond alsa webmin timidity++)
I've tried googling, but no suggestion seems to work. Any help?This is basically a workaround, but still. You can try hold_connect script to automatically watch connection status. It can be found here: https://bbs.archlinux.org/viewtopic.php?id=103139. Just add "iwconfig wlan0 power off" string in function connect under "sudo netcfg down ..." line.
-
Time out error on front end ( 60 seconds) developed in web dynpro ABAP
Hi all
I am getting TIME OUT error ( ERROR :- Connection to partner break in 60 seconds) on front end (on web) because in SAP backend there is a function module excuting and taking 3 minutes. But on front end developed in web dynpro ABAP time out is coming in 60 seconds.
Please help me how can i increase this TIME OUT time on front end more than 60 seconds.
Please help as soon as possibleHi,
see the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/7b/72092aaa1342c5a3af7ce0b9a11ff9/frameset.htm">Documentation</a> and
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/78/9852b7c06b11d4ad310000e83539c3/frameset.htm">this</a>
Regards, Heidi -
Changing time-out for scheduled data refresh
Using a Power Query connection, is it possible to extend the time-out time for scheduled data refreshes? The amount of data to be retrieved is rather limited, but there's thousands of rows (NAV server).
If not, any suggestions to how to reduce latency?
Thanks.Thorm,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Safari "time out" has been shortened... a fix?
Hi, Safari 3 seems to have shortened the length of time that it will wait for web pages, images, etc to load before it declares a "time out", compared to Safari 2. This was reported to be a problem in the beta phases, but the problem is certainly there in its current form on Mac OS 10.4.11 with Safari 3.0.4.
This is a problem for those of us on dial-up 56kbps connections, where webpages fail to load fully due to a whole host of "timed out" images, style sheets, etc, as reported in the Activity window. Safari 2 used to load pages just fine by just being a little more patient before giving up.
Is there a way of increasing the time out time for Safari 3? Obviously, getting a faster internet connection is not an option.Yes, this is a pretty serious problem. It isn't just a problem with dial-up. I have a 384K DSL connection and see it all the time. It can also happen when loading from slow servers regardless of your Internet connection. I see it on pages with lots of image thumbnails coming from slow servers. I also see it when I load several pages at once (such as command-clicking on several links to open pages or full size images in separate tabs).
Under Safari 2.x, pages would load as best they could and either finish loading, or the images that failed to complete would still be partially visible. Under Safari 3.x, any image that doesn't load by a certain "time out" changes to a ? icon. Plus, in Safari 3.x, images that are partially loaded are displayed while trying to load, but then when it times out, the image is cleared and replaced with a ? icon. This is frustrating because often the image has loaded, but it's waiting for some "completion" flag to say the image was loaded, or maybe it's still loading a better quality version of the image, but the lower quality image is completely visible - until Safari 3.x erases it and replaces it with a ? icon.
Again, this isn't just a dial-up problem. It's a problem with loading any web page that takes too long - no matter what your connection. For example, this web site is a perfect example:
http://www.pixolator.com/zbc/featured2col.php
Another example are forum pages with lots of avatars and images in the messages. Because the images come from so many different sites, fast and slow, I often see only half the images. This link is a good example:
http://www.stickboyracing.com/stickforum/viewtopic.php?t=154&postdays=0&postorde r=asc&start=0
This is a pretty inexcusable error in Safari, and it has existed for over a year (ever since Safari 3.x was first released I believe). It has made Safari unusable for reading many forum pages, and accessing any web page with a large number of images or thumbnails.
The only solutions I've found are to use a different browser, or click on a link a couple times to reload the page without doing the equivalent of a "refresh" on the page so it loads images out of the cache the 2nd time I click on the link, and reloads those images that didn't work the first time. -
Set up for HP Designjet 500ps using Mac os x 10.4.11 Does any one know where to upload
Leopard os x 10.5 The printer will not print until I have the updated software. Ebay sell the
disc on their auction site, but only on disc not a download which is more convenient & faster
to get in a hurry.The software installed in the mac is working the way it should & showing up
as it would but it seems as though there is a driver that's needed. The results in any articals
that I have read suggest you don't need any drivers if you use HP EasyPhotoSoftware installed.Welcome to Apple Support Communities. We're users here, not "Apple Inc."
You might have better a response to your questions by posting them in the OS X 10.4 Tiger forums: https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger
or in the PowerMac forums:
https://discussions.apple.com/community/desktop_computers/power_macof
This forum is for OS X 10.6 Snow Leopard. Since that version won't run on your PowerMac, you're not likely to get many helpful responses here.
In any case, I'll try to offer some basic troubleshooting suggestions:
The PS designation on your printer denotes the PostScript printer language. Is your applications software and current printer driver configured to send PostScript (or HP-GL or HP-PCL or ???)
Does ANY application print anything (even gibberish) to the printer?
HP still shows a DesignJet 500 series raster driver for OS X 10.4 Tiger available to download here:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/? sp4ts.oid=377952&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Di dx%253D%257CswItem%253Dpl_97046_1%257CswEnvOID%253D2072%257CitemLocale%253D%257C swLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTo k=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Does the printer time-out with every program, or just one? Have you tried another cable?
OS X 10.5 Leopard is no longer sold by Apple. It was never sold as a download, sold only on CD/DVD disc. Discs might still be available for purchase on eBay.
OS X 10.6 "Snow Leopard" is the oldest version of OS X still sold by Apple, and it too is available ONLY on CD/DVD for $20, but it will not run on your PowerMac, because Snow Leopard requires an Intel processor: os x snow leopard requirements
HP DesignJet 500 basic printer documentation is available as a pdf document and downloadable file here: http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults?sp4ts.oid=2 5301&ac.admitted=1391720518005.876444892.199480143
How is the printer connected to the computer? Are you using a USB interface, a Centronics 'Parallel' interface, or a JetDirect network interface?
It appears that the network timeout default for the printer was 30 minutes, but it can apparently be set in the range of anything 30-seconds and longer. The manual notes that some software does not send an 'end of job' postscript marker, so that is the reason for the time-out setting.
http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docD isplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=do cDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDoc Display=wsrp-resourceState%3DdocId%253Demr_na-c00749274-1%257CdocLocale%253Den_U S&javax.portlet.endCacheTok=com.vignette.cachetoken -
Hi Experts ,
When i run a particular application and then keep it open for some time .
Then when i try to run it , it gives a dump ..saying " time out "..
Can anyone suggest any alternative for this .
Thank You.
Radhika.hi
good
go through this link hope this would help you to give the idea about the time out dump.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
reward point if helpful.
thanks
mrutyun^ -
Increasing Max run time in DATA load
Hi,
I know to increase the maximun run time we have to set in the infopackage level or RSCUSTV2 or from Monitor
My question is how to increae the time for the dataload when the load is happenning.
Assume the r/3 job is running and the BW job is going to be red due to timeout setting. I want to extend this time out time during this dataload...
How to do that ?
ThanksHI
Pvc
This is a basis job you will have to chnage the setting of the profile.
Tcode is RZ10
select your profile
look for max_wprun_time
you will have to increase it here
You will have to restart the server after doing this.
Contact your basis team to do this
Hope this helps
K.Mohan -
Does the alarm ever time out?
I have the alarm set daily to wake me up for work. Tonight I accidentally left my phone at work and it's not convenient for me to go back and get it before I go to work tomorrow morning. If it goes off in the morning, will it keep going indefinitely until "Dismiss" is selected? I always turn it off right away and have no idea how long it can go on for.
Hoping I don't have to rush in at the crack of dawn so it doesn't bother all my early-bird coworkers!Yu Yang wrote:
Our ADF project Integrated with OAM for SSO, if we set the OAM session time out time is 40 minutes and ADF project session time out time 30 minutes Are you referring to the OAM idle session timeout or total session limit? My guess would be you are asking about the idle session timeout.
and when the ADF project reach the session time out then we relogin the ADF project , and at this time does OAM session time out time will reset to 40 minutes or just left 10 minutes?If there is any update to the session, then the idle timeout counter will be reset to 0. -
Time out 0CO_PC_ACT_02
Hi
Since one week we are facing time out problem when executing 0CO_PC_ACT_02. This is running in infopackage groups. Its ending in short dump "Time out".
How can we solve this problem.
Regards
RakHi Steve
Is the job executing in R/3?
How can i check if this job is in R/3
What is your timeout period in R/3?
Where in R/3 should i check for the timeout period
Time out time in infopackage is 7 hrs.
In infopackage i copied the job name and executed in R/3, SM37. But no jobs are found. In the same way in BW as well. But no jobs are found.
In monitor screen "Details" tab,
Requests (messages): Everything OK [GREEN]
Extraction (messages): Errors occurred [RED]
Transfer (IDocs and TRFC): Errors occurred [RED]
Processing (data packet): Errors occurred [RED]
Regards
Rak -
Time Out error : Its urgent
Hi ,
The scenario is that I am running a Process chain in which there is a loading process . In that process if data loading takes more than 1 hour it gives time out error . in ST22 , but in Sm37 it is active. Moreover in scheduler , the time is set to 2 hrs.
What is happening ? can any one please explain . what should I do to get rid of time out error ? can we set time in update rule as in scheduler ?
Please help me ...Hi Rajib,
In your case even if you set the time out time in scheduler it takes the default work process settings. Which you can see in the Parameter rdisp/max_wprun_time
at RZ10 transaction and select Instance profile. Even if the job is in active in sm37 it doesn't progress further when there is a timeout recorded. Try to get intouch with you BASIS guys and get the parameter settings to 2 hours. which may require server reboot.
Hope it helps.
Regards,
Srikanth. -
Multiple Table.AddColumn command in a single Power Query
I was using this example in another thread for another question and this issue popped up.
I have this list in sharepoint.
When I run this Power Query
let
Source = SharePoint.Tables("https://server/test"),
PQtesting = Source{[Name="PQtesting"]}[Content],
RemovedColumns = Table.RemoveColumns(PQtesting,{"ContentTypeID", "ContentType", "CreatedById", "ModifiedById", "Owshiddenversion", "Version", "Path", "Attachments"}),
Custom1 = Table.AddColumn(RemovedColumns, "Options 2", each Text.Combine([Options][Value], ", ")),
Custom2 = Table.AddColumn(RemovedColumns, "Options 1", each Text.Combine([Options][Value], " and "))
in
Custom2
Only column Custom2 shows up in the output, if I remove custom2 then custom1 shows up. It appears only one custom column shows up at a time as I can swap them and the custom column on the bottom will always show in the output. I have found examples
online of others using multiple custom columns. Is this a limitation of something I'm doing in my code or of sharepoint, or am I doing something wrong?
Thanks in advance,
EricI'm a bit embarrassed on how long I have been trying to figure this out.
Thank you so much for your help.
Eric
Maybe you are looking for
-
An app to search photos by file name in ipad..
Hello Everyone, Hi this is romit. I am looking for an application in which one can search all images in ipad by its name. For instance: in Mac we have spotlight to find an app by its name, no matter whats the location or type of app it is. provided t
-
Not able to access the Date variable in Bex report after SP upgrade
Hell Experts, We have upgraded the support pack to 27 and after that we are not able to access date variable in Bex report. We are not able to restrict the Posting date on variable, we are getting the message "Operation failed! No detailed error info
-
Volume Structure Failed message
When I run the Techtool Deluxe software on both hard drives, the original hard drive from Apple and another WD 320 drive I bought and installed I get the Volume Structure Failed message on both and Techtool Deluxe cannot repair either. Anyone have id
-
How do I stop the "factoid add" from popping up on my Samsung Intensity III?
I have a Samsung Intensity III and about every hour or so when I pick up my phone, I find that there is a "factoid" add as my lock screen. It's supper annoying. How can I go about disabling it? Does it use data?
-
Solstice x.400 9.0---kernel panic starting osimta daemon
Help! After installing this sw stack: Solaris8 Disksuite 4.2 and simple mirrored filesystems Solstice x.25 9.1 HP NNM Solstice x.400 9.0 and after registering the licenses the system crashes at boot. Any idea about solution? Thanks in advance anyway