Power requirements of HP LaserJet Pro P1606dn Printer

Hello,
I had bought this printer from USA and brought it to India.
Now I've a question that whether this printer will work with a 240v of power input ??
Cause in USA HP website it is mentioned that it will work with a 110-volt input voltage: 110 to 127 VAC (+/- 10%), 60 Hz (+/- 2 Hz), 7 A; 220-volt input voltage: 220 to 240 VAC (+/- 10%), 50 Hz (+/- 2 Hz), 4 A
It can be seen over here : http://www.shopping.hp.com/en_US/home-office/-/products/Printers/HP-LaserJet/CE749A?HP-LaserJet-Pro-...
In India's Product page also it is mentioned same.It can be seen over here : http://www8.hp.com/in/en/products/printers/product-detail.html?oid=4110411#!tab%3Dspecs
Moreover on the back of the printer power requirements are given 110-127V ~AC.The pic of it can be seen over here: http://www.storemyfile.org/getfile.php?id=5724&key=4e7b6c045
So I'm in dilemma that whether this printer is a multivoltage printer (i.e. 110v to 220v) or not?
Pls. give me clarification about this so that I can start using the Printer ASAP.
Thanks

Welcome to the HP Forums RockmihiR91,
I read your post and see that you would like to know if the printer supports 240v.
I can help you with this.
Yes, you can use the printer on the 240v, but you will need a power outlet adapter and you will need
the adapter so it will fit the receptacle and converter.
It is not internally on the printer.
Hope this helps.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • HP LaserJet Pro P1606dn Printer constantly goes offline

    We have a HP LaserJet Pro P1606dn Printer. We initally put this on our print server. But almost immediately it goes offline. Current settings:
    Jam Recovery: Auto Auto Continue: On IO Timeout: 1800 Auto Off: Disabled
    Since it was so problematic - we took it off the printer server and are allowing access via IP (not going through our prit server) and it is behaving the same way.
    Has anyone else seen this? Any suggestions?

    Hi @Halan ,
    I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
    What is the distance of the printer and the Laptop when the printer goes offline?
    Try these steps to see if it will resolve the issue.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Laserjet Pro P1606dn running on a dell using XP Pro won't hold the default printer setting

    Laserjet Pro P1606dn printer
    OS is XP Pro
    set it as the default printer but that setting keeps changing
    How to fix this?
    thanks

    Yes, you need your own copy of WinXP (I used the one that came with VPC) but I'm afraid I have some good news/bad news to report. The good news is that WinXP does run a bit faster than VPC did on my dual processor G4 - the bad news is that XPs hardware detection DOES NOT - and I could find no way t force it - to recognize any USB or Firewire devices. Because I use Windows primarily to connect to USB GPS devices, this was a real letdown (and would be to users who need to, oh, I don't know, PRINT from Windows).
    I'd love to hear from anyone has Windows actually functioning under OpenOSX Wintel - the website only goes as far a getting it to install and running Explorer (which I was able to do). I also had numerous keyboard problems: sometimes Windows would accept no input from the keyboard, sometimes it would reverse the caps lock key (on produced lowercase letters, off all uppercase). It also does not recognize the Apple Mighty Mouse as a two-button mouse. A number of these problems were - somehow - fixed by VPC which I never had a problem with when it came to USB devices (at least it DOES recognize a 'network card' and I can use Internet Explorer - whoopee!).
    I'm going to play with this some more before throwing in the towel but I'm not so certain that I'm going to work towards the dual boot solution until I hear that Windows and Windows apps actually function - like being able to print or recognize a USB device.
    Just getting Windows to install and run is of little good if it doesn't actually provide simple functionality.
    I may copy and paste my original post in the Windows compatibility forum - see if any of those folks have found a working solution,

  • HP LaserJet Pro P1606dn - Toner Cartridge Reject

    HP Laserjet Pro P1606dn does not recognize toner is in machine.  What can be done - The light showing need for toner cartridge will not go off-printer willnot print

    Hello @debadmin1, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing toner issues.  I would like to help.
    I would recommend performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then recommend this document on 'Install Black Cartridge' Message Displays on the Control Panel or Blinking Toner Light Displays on ...
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP LaserJet Pro P1606dn ip address change automatic

    i have a HP LaserJet Pro P1606dn, there is problem with IP Address, ip address change automatic in this reason i am not able to use the printer, pls solve my problem....

    Hi @Naksain, 
    I see by your post that the printer's IP address changed automatically and you can't use the printer now. I can help you with this.
    From the Configuration page, get the printer's IPV4 address, try and access the Embedded Web Server for the printer.
    Type the IP address into your web browser's address bar. (Internet Explorer)
    Printing a Configuration Page.
    If you can still access the printer's Embedded Web Server, then create a new port with the new IPV4 address.
    Go to start, devices and printers, right click the printer, go to printer properties, select the ports tab.
    Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
    Type in the proper IP address for the printer.
    Make sure the printer is online.
    Test the printer.
    Setup a Static IP address for the printer, this way the printer will keep the assigned port.
    Printer Does Not Maintain Wireless Connection.
    Disregard the title. Under Windows, go to Solution four: Assign your printer a static IP address.
    Just use the IPV4 address already assigned to the printer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro P1606DN compatible w/ Airport Express?

    I am going to be purchasing a new Mac Pro and would like to be able to print wirelessly to a laser printer. I like the HP LaserJet Pro P1606DN, but it is not a wireless printer, per se.
    I understand after speaking with an Apple representative that a non-wireless printer (assuming it has the right drivers) can be plugged directly into the Airport Express via USB, which will allow a Mac Pro with an Airport card installed to print to it wirelessly.
    So, I have two questions:
    1) Does the HP printer mentioned above have the proper drivers (or is otherwise compatible) to work with the Airport Express?
    2) Will the configuration I mentioned above work, assuming the printer is compatible with Airport Express?
    Thanks in advance for any help and suggestions!
    This question was solved.
    View Solution.

    It should work just fine.  Your Mac Pro does not have to be wirelessly connected to your network for it to work, a wired connection will also work (unless the Airport Express will not be on your network but rather just stand-alone).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP LaserJet Pro P1102w Printer - Firmware Upgrade

    In her apartment, my elderly mother has an HP LaserJet Pro P1102w printer, that I set up for her.
    It’s hooked up, via WiFi, to her Router that's attached to her Cable Modem.
    She doesn't have her own PC. She has only the printer.
    When the printer was first purchased, I brought the printer and my Windows XP laptop to her home and installed the printer there.
    I email documents to her printer's HP ePrint email address, and I also print web pages to the printer using Google Cloud Print. I do this from my own home, to send her information from the Internet.
    An email was received today, saying the following:
     "A free firmware upgrade is required to keep your ePrint and associated Print Apps service working. Please go to www.hp.com/go/eprint, download the newest firmware, and continue using your ePrint solution. If you do not complete the upgrade, your ePrint and Print Apps may not work after Hewlett-Packard has finished a service upgrade on 08/07/2013.
    Devices requiring the free firmware upgrade are as follows:
    HP LaserJet Pro P1100 Series (model HP LaserJet Pro P1102w)”
    Is there any way for me to use my Windows XP laptop, to connect to the printer, remotely over the Internet, via the printer's HP ePrint email address, or via the HP Connected account, or in any other way,
    and initiate the printer’s firmware upgrade, without leaving my home?
    Thank you.

    Hi, the short answer is no.
    Read the "How to Install" at this link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How much inrush current on HP LaserJet Pro P1102 Printer ?

    I have an HP LaserJet Pro P1102 Printer. I want to connect it with the UPS (or maybe power generator). To calculate the rated power of UPS, I would like to know how much the inrush current of this printer model. 

    Hi gade1234,
    Welcome to the HP Forums.
    I see that you would like to know the specifications of the printer's power.
    I can provide you with the specifications of the printer.
    Here are the specifications of the Laserjet P1102.
    HP LaserJet Pro P1102 Printer Series Product Specifications
    Select Power specifications.
    I have also provided the manual for additional information.
    LASERJET PROFESSIONAL P1100 Printer series User Guide.
    Hope this helps.
    Have a great day.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Trying to Locate Email Address For HP LaserJet Pro P1606DN

    I am trying to locate my HP LaserJet Pro P1606dn email address for e-printing. The HP site says to use the two-line screen, but my printer has no screen. Please help.

    Hi kacb,
    You can locate your ePrint email address in the ePrint Center, or if you haven't created an account yet, you can also locate the email address within the EWS of the printer. To access the EWS, put the printers IP address into a web browser on your PC.
    I was an HP employee.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • HP LaserJet Pro 400 Printer M401a (CF270A) is not printing complete statement on letterhead

    Dear
    i have supplied printer HP LaserJet Pro 400 Printer M401a (CF270A)Qty 10 to my customer but its not printing complete statement there is missing ink in the words and also spots are coming on the page.
    the page is letterhead of the company.
    could you please advise what will be reason.
    Waiting for your reply.
    Regards
    Faisal Farooq

    VII,
    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP LASERJET PRO 400 PRINTER M401DNE CF399A drum

    I m waiting to receive my new HP LASERJET PRO 400 PRINTER M401DNE CF399A in a few days. I m searching for the suplies may need in future for my printer and i couldn t find any printer drum for this model.  Please help me about my issue.

    The toner cartridges contain the drum, when you get a new toner cartridge you are getting the self contained drum as well.  You can find supplies on the HP SureSupply site.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp laserjet pro p1102w printer

    Dear,
    I want to bye a hp laserjet pro p1102w printer, for my business.
    I am a Graphic Designer and I want to print Paper as well as Tracing (for Screen Printings)
    It is Posiible ?
    Thanks
    Ketan

    Hi, the short answer is no.
    Read the "How to Install" at this link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • LaserJet Pro P1102w Printer

    I have a HP LaserJet Pro P1102w Printer
    Model: CE657A
    Serial [Edited for Personal Information]
    purchased Staples 10/13/13
    It worked until yesterday when my ISP replaced my modem
    It is connected wirelessly and now it doesn't work at all, and when I look in Control Panel, I don't see any printer
    How can I get this to work again?

    Hi @NYCJudy, 
    I understand that you had the modem replaced and now the printer isn't working over the wireless network. I can help you with this but I will need some more information to provide the proper steps, depending on what operating system you are using.
    We will need to restore the defaults on the printer and then configure the printer over the network again.
    What operating system are you using?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How to Find the Windows Edition and Version on Your Computer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Does the HP LaserJet Pro 400 Printer M401n (CZ195A) work with Linux?

    Does the HP LaserJet Pro 400 Printer M401n (CZ195A) work with Linux?
    Thank you for your help.
    James Adrian
    {Personal Information Removed}

    Hello happy321,
    Welcome to the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Laserjet Pro 400 Printer unable to print docs using both letter and legal paper

    HELP!!  Have been using an HP Laserjet Pro 400 M425dn dual tray printer for 2 years, along with a Dell laptop.  Always had ability to send documents to print using both letter and legal size paper.  Under print set-up on laptop, the option checked was always set to "Choose Paper Source by PDF Paper Size".  Now I've just purchased an HP Envy All-in-One Desktop, which does not offer that option under Print Set-Up.  While it allows for 'Auto Selection' of paper size, you are required to choose either letter or legal size paper.  I've called tech support 3 times, the latest call earlier this am, only to be disconnected.  Yesterday I was told that I should go on hp/support and update drivers.  My husband downloaded drivers, but still no fix.  Unless this issue is resolved asap, I will have no option but to return this Envy Desktop, as I cannot run my business without this option.
    Anyone have a similar problem?  How was it resolved?

    The available options will (probably) be determined by the printer driver in use.
    This , in turn, will be determined partly by which Operating System and version you are using.
    Once a printer model has been out in the field for some time (generally when the next generation (or two?) of devices has been announced to supersede it) that model becomes a 'legacy' device, and 'full-specification' printer drivers may no longer be supplied by the printer manufacturer, but basic (i.e. without too many options) drivers will (probably) instead be supplied with the operating system.

Maybe you are looking for