Power Saver utility not working/can not uninstall

When I trying to start Power Saver from the control panel, it writes something like:
"Power Saver is nor running. Please first set Power Saver as a default power control scheme in power management".
But power saver is already set as my power control scheme.
I tryed to reinstall Power Saver (downloaded from Toshiba site), but it writes "fatal error while uninstalling previous version".
The manual start of the uninstallation give me the same error.
I found that I can delete deinstallation protocol of Power Saver.
After doing so the new version was installed without problems, but still not working. The same error:
"Power Saver is nor running. Please first set Power Saver as a default power control scheme in power management".

I have Toshiba Satellite L100-120 laptop.
Hello, Stefan.
After doing as you sayed I have another problems:
0) Error window when user log in:
Caption: "TPSODDCtl.exe -- ordinal number is not found"
Text: "The ordinal number 21 is not found in DLL library TPSMainCtl.dll"
1) There is no "Power saver" power scheme in the power setup
2) When I'm trying to start Power Saver from the Control Panel, I get the following error: "Can not open, because you have no access to "TOSHIBA Power Saver" utility".

Similar Messages

TS2755 the pic butten on messages is not working. can not send or recieve photos. please help.

the pic butten on messages is not working. can not send or recieve photos. please help.

Hi Beharley,
try resetting your network settings: Settings - General - Reset - Reset Network Settings. This works fine if something is messed up with your carrier bundle.
Regards, Peter

Get mail button not working can not receive any mail

Hello
my mail stops working half way. I can sent messages but suddenly my get mail is not working anymore. not through the button and not through the mailbox menu.
any help
regards

Who is your ISP, how is your mail configured - POP or IMAP and do you get any error messages and if so what are they?

HP Officejet 150 mobile, HP scan does not work (Can not find scanner)

Hi,
I just bought a HP Officejet 150 Mobile All-in-One. I installed the complete software package (downloaded from HP Site) with bluetooth on a windows 7 Acer Aspire S5 laptop. Printing seems to work fine, but when starting HP Scan, i get the following error message:
Saing that the software can not find the scanner with suggestions to solve it.
Is it possible to scan with a buetooth connection? Any other suggestions what is going wrong?
Best regards,
Roelof Crevecoeur
This question was solved.
View Solution.

Hello Roelof Crevecoeur,
Scanning is not supported through a Bluetooth connection, only printing is available for such connectivity, You will need a USB in order to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137985&tmp_task=setupCategory&cc=us&dlc=en&lc...
NOTEcan functions are not available through a Bluetooth connection. Scan functions are supported only through a USB connection.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Report Concern not Working, Can not remove Wrong Review Posted

I'm the writer of a specific review - (1 Star Rating as the product did not work at all)
And published this review by accident in the WRONG place for another product by clicking on the WRONG item on the Apple original invoice.
When Signed in using my Itunes account - this review does not show up in my account, so I can not remove it.
I've contacted the company for who the wrong review was placed and they can not remove it either.
Clicking on Report a Concern, does not help either, as nothing happens when I click to submit the report to Apple.
I've done the following: and nothing worked.
1. Signed in with my own Apple ID to report the concern.
2. Signed in with a different Apple ID to report the concern.
3. Used a Windows PC & Itunes.
4. Used a Mac & Itunes.
I really would like this wrong review to be removed, and could also not find an email address to report this issue directly to Itunes/Apple either.
Thank you for any assistance with this.
RDAU

Hello Vijay ,
I have grant permissions to the user and the report in BI webcatalog and also in BIP under admin tab I have addes the role which the user belongs to and also the shared folder . Still the problem exists.
My BI presentation servcies security is working . My user security is also working , all that I need is the user should be able to see the report when he clicks on BIP link placed in dashboard.

Loadjava is not working(can not find libjava.so)

Hi ,
I am working on linux7 server which has oracle9i database.
when I gave loadjava command. I am getting this error
"can not find libjava.so".But "libjava.so" is there. my java home is /usr/lib/java. I donot know which error is this.
it seems linux error
For time being manually I am loading java files in database.
thanks,
.

For what purpose are you trying to connect them?
Only specific apps support Bluetooth connections between iOS devices, and you can only connect an iPhone to a computer via Bluetooth for internet tethering.

Can not load pictures to send...insert/(paper clip) attachments does not work, can not load pics

when I attempt to send an email with pictures, I can not download them,..the bar with "Attachments doesn't do anything when I go to load the pics in the email....it works fine on Internet explorer and was fine before I downloaded Firefox 4....now I am reading that forefox is not using the memory it is supposed to have....should I just find firefox 3. something and use it?

Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?

Apple TV3 not working - Can not connect to iTunes, Very, very slow streaming. Help please?

For just over a week I have been unable to stream film/TV shows from Netflix via my Apple TV. When I have been able to, the streaming is painfully slow... for example, to watch a half hour program I have had to pause it at the beginning and leave it for 30-40mins before I can watch it and even then i'm not guaranteed to be able to watch it all! On top of the streaming issues, I tried to purchase a film from iTunes via the Apple TV - this took 3days to download!! Then finally, last night, it all seemed to stop working - will not connect to iTunes account at all (can not connect to server). I have checked again this morning and the error message says the same thing. My internet connection is fine (perfect on both mac, dell laptop and iPhone. I have tried the obvious troubleshooting methods - nothing has helped.
Can anyone please tell me whether this is an internal Apple issue and if we know how and when this will be resolved? Or has anyone else had the same problems and been able to resolve them?
I'm pulling my hair out...

This would be an issue with your network. Netflix will constantly adapt to your connection. iTunes content is fixed, will cache as you watch, and will need to load a portion before playback begins. As you have not provided information on what you have tried, I will list common things to check.
What is your current connection, via speedtest.net
Make sure DNS is set to auto (settings - general - network)
Make sure router is up to date, if on wifi try ethernet
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise

Quicktime loaded and not working - Can't uninstall

I have tried for the past few weeks to get my iTunes working.
Everytime I click on iTunes, a message pops up stating that Quicktime Streaming cant run because it is already loaded. I went to Run>MSConfig and turned off the QTTask button, restarted and it still gives me the same message.
I can't open up QT because it shuts down on me when I click any tab in the folder.
I attempted to uninstall and it said the same thing, Quicktime streaming can't run because it is already loaded.
I then went into remove software and tried to uninstall it there and a message came up stating:
Error : 0X80040707
Description : DLL Function call crashed : QTInstall code quicktime.unistallproc.
Setup will now terminate
What does all this mean and how come it's happening? How do I fix it? It was working fine and then just one day, bam, it stopped.

okay, that's a 32-bit version. so here's what we'll try first.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of leftover QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime software in Windows
once we've got all the existing QuickTime scraped away, let's try a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Installers … get the one that doesn’t mention itunes
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

2ND Battery is now NOT working(&)Can NOT restart(&) Going very slow!

I apologize if I am posting in the wrong place. I am new to this and I am wondering if anyone had any solutions or input to my post subject. I have just replaced the original MacBook battery and now the replacement will no longer charge much like the previous. Also, I am NOT able to restart the computer. I must shut down and start using the power button. Finally, the computer is very slow now and not able to properly stream most media online. If anyone has any idea what might be the problem I would appreciate any and all input. Thank you.

Was it an Apple-branded battery? Any chance the charger is bad?
Try booting from your OSX installation disk and use Disk Utility to repair permissions on your hard drive.

Hotsync not working; can not find condmgr.dll, hslog2.dll and cmds21.dll

·         The ordinal 96 could not be located in the dynamic link library CONDMGR.dll ·
This application has failed to start because HSLOG20.dll was not found.
·         This application has failed to start because CMDS21.dll was not found.
I have recently had two customer contact me and said that when they try to hotsync my application they get the above 3 errors. this has happened on an xp and a vista machine.    I had then re-install hotsync but it did not fix the problem. Has a seen any kind of errors like this?
Has palm release new versions that could cause this
Post relates to: Tungsten T5
Post relates to: Tungsten T5

Good idea for the steps.
Actually there are two ways
One way
1. install hotsync version 6.
download this palm application and select autoupdate option
http://www.trvlink.com/download/delta/dlpalm.exe
2. Upgrade to hotsync 7.0.2
3. this is a weekly download so the next week, it will hot sync and get the errors. NOTE: if you never download 7.0.2 the autoupdate would work with no problem.
The other ways
1. install hotsync 6
2. Upgrad to hotsync 7.0.2
3. download this palm application and select autoupdate option
http://www.trvlink.com/download/delta/dlpalm.exe
it will through the error.
thanks
Post relates to: Tungsten T5

Equium A100-027: Toshiba Power Saver Utility

I have a Toshiba Equium A100-027 laptop and the fan goes on every couple of minutes after it has been on for 15 minutes and it is highly annoying.
I was told I could change the Cooling Method so that fan goes on less or constant but I can't seem to run the Power Saver Utility.
I uninstalled the Value Pack that came with the laptop and long with some other Toshiba programs but I installed it again from the website but I cannot find the Power Saver Utility. It is not in Control Panel. I see a folder with the files in on Program files but whenever I try and open it, it wont load anything.
Why is this?
Can I run the Power Saver Utility on the A100-027 or is it not compatible or something?
I would have thought it should work on all Toshiba Laptops.
I can do a recovery and try it but I don't know if it will work or not?
If it works, whats the best option so the fan is either on much less or is on constantly at a lower speed?
I am sending the laptop to Toshiba to look at because I hear an audio glitch/crackling/fuzzing when I play music and the fan goes on and off and I think this must be some kind of small glitch to be fixed but I don't know if they can fix it. If they don't fix it, can they replace it?

There are no BIOS updates for my Laptop Model.
I have done a system recovery using the recovery disk and the audio glitch/crackling/fuzz persists and the fan runs at the same rate.
The laptop will be with Toshiba Engineers on Monday but I don't know if they will hear or notice the problem or if they do if they will fix it.
I hope they can either fix it or replace the laptop for me.

I bought all the episodes - full episode Sally - the amount of 11.99 dollars did not work did not carry episodes

I bought all the episodes - full episode Sally - the amount of 11.99 dollars did not work > Can not download episodes
سالي كل الحلقات/ سالي الحلقة الكاملة
date 12/3/2012
order: M1vyql3kk9
Please return the amount to the account, the amount Aotaubi buy other products

Log into your iTunes account, click on your name,
select Account from the dropdown list, on the Account
page, select Purchase History and click on the arrow
to the right to see what you bought and when. If you spent
more than you had on the account, it was charged to your
credit card. Check your credit card bill online at your
financial institution to see if you were billed for anything.

Power saver Utility does not run on new OS

Hello there,
I have reinstalled win XP pro Hun SP2 ED.4 codename:Simplicity on my freshly bought toshiba laptop A110-253. My question is the following:
How can I install the Power Saver Utility on it?
I have downloaded the utility from the official Toshiba EU website: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
There were 2 subcategories in the Stellite A110 series: (PSAB0) and (PSAB6)
It confused me a little bit, though i did not worry too much about it, I tried to install both, with no success
At the time when I aim at running the install file the following error alert pops up:
16-bit programme cannot be run Under Windows / It should be something similar to this one in the English version /
All the other utilies were installed properly and they run properly. I would not like to install the Windows with the help of the Recovery CD, I prefer the one that I use now.
Having my laptop without the Power Saver Utility is rather embarrasing as I am constantly on the move and do not have the possibility to refill batteries all the time.
I hope someone can help me.
Thank you in advance!
Message was edited by: beigli69

Hello
If you check notebook model label at the bottom side you will find right model number. I presume it must be satellite A110-253 (PSAB6E). Am I right?
So now choose the right notebook model and download Power Saver Driver V2.42.0.4C and Power Saver Utility V7.03.07C. I presume you know that installations order is very important and if you check Installations instructions you will see that Power saver Driver is listed at first and also must be preinstalled at first.
By the way: it is always useful to create Tools & Utilities CD before you install own OS. Doing this you must not download anything just use this CD and install all necessary stuff in listed order.
Bye

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Power Saver utility not working/can not uninstall

Similar Messages

Maybe you are looking for