Power Shell Get Command not recognized

Dear expertise, 
I was assigned to filter spam mailing at work . i am trying to find out the current junk mail configuration. We have
2 exchange servers, one is CAS server and one is mailbox server. While i type in the Get commands IE Get-IPAllowListConfig,Get-AgentLog
etc . It pops me The term 'Get..." is not recognized as the name of a cmdlet, function...
I also tried Get-ManagementRoleAssignment but it still result the same. Can someone advice me what am i missing ? 
Thanks so much
Regards,
william

1. Did you open Exchange Management Shell (not the traditional windows powershell)?
2. If you don't have proper Exchange permission then you won't be able to find the respective cmdlets. When you open Exchange Management Shell, it will load only respective cmdlets that you have permission on so if you can't find then you might not have
proper permission.

Similar Messages

  • My iPod touch will not power up and is not recognized by my comptuer anymore

    Good afternoon, my ipod touch (4th Gen) will not power up and is not recognized by my computer anymore. I have attempted to restore but that did not work. I have also charged for several hours. Any suggestions? Thanks!

    I have already tried that as well and unfortunately it did not work.

  • HT1386 After the recent iTunes my PC recognizes that I have connected my iPhone, but iTunes does not. I tried the trouble shooter; it said device not recognized. I clicked the help button as instructed and get iPod not recognized instructions. What for iP

    I have not been able to sync my iPhone 5s on my PC sincethe most recent update to iTunes. My computer showsthe iPhone as connected, but iTunes does not recognize it. I tried the trouble shooter and got device not recognized. I clicked the help button beside the failed test and get iPod instructions. How do I get iPod instructions for work for an iPhone? Better, how can I get this to show iPhone instructions? (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)

    You wrote: (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
    You may have to do this on this computer as well. http://support.apple.com/kb/ts5376

  • Why do I keep getting "format not recognized" error?

    Hello,
    I was trying to play any of the video podcasts from Nick Jr (e.g iCarly, Drake and Josh) for my kids and I kept getting a "format not recognized" error on my APple TV and when trying to play on my PC with iTunes, the video doesn;t play at all. This seems strange to me as these podcasts are rated in the Top 10 under "kids and family" genre so they must be working for others. I was able to play other podcasts in this genre such as the Sesame Street podcast. Any ideas why these Nick Jr. ones aren't working for me?
    Thanks!

    I have been having the same problem - with podcasts AND with Movies and TV Shows bought through iTunes. I was hoping the recent 3.0 upgrade would fix it, but no such luck. While this was an occasional problem with iTunes 8, it seems to have turned chronic with iTunes 9.
    The annoying "solution" that seems to work is to unplug and replug the Apple TV and quit and restart iTunes. Even then, while watching TV Shows or Movies continuously it seems to work, but after any interruption, either due to shutting off the Apple TV or letting it go to screen saver for an hour or so between shows or movies, iTunes loses it from the device list, and the "format not recognized" message returns.

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • HP L7680 suddenly stopped working Mon, 2 computers get device not recognized

    We are totally frustrated. The printer worked fine on Sun.  On Mon, no luck.  We have it directly connected to a Compaq running Windows 7 and occasionally switch it to a Toshiba laptop running XP.  Both machines now say a USB device is not recognized.  We have tried switching the cable, rebooting all devices.  Nothing works.  When I tried to get the Solution Center to recognize it, it went to 98% and into never-never land.  After 20 minutes, I gave up.  Any ideas?

    Hello retiredinsc,
    Welcome to the HP Support Forums!
    Sorry to hear about the recent printing issues on the L7680, it is very strange that on Sunday it will work and then Monday it will not.
    With the USB cable connected, to either computer, run the Print and Scan Dr. This will check for hardware issues on the printer, driver, software and communication issues on the computer.
    Let me know what the results are, what passes, fails, etc.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Automtor shell script "command not found"

    I want to include the execution of a shell script in Automator. The script just executes a third-party application (actually, pdftk) with certain parameters. I have written the script, saved it in my Home directory as "foo.sh", made it executable, and can correctly call it from Terminal with ./foo.sh. It works as expected.
    But if I include it in Automator's workflow, into action "Run shell script", its execution breaks complaining that "pdftk: command not found". This indicates that the script is correctly found and read by Automator. How is it, that Terminal's bash can find the command, but Automator doesn't ? Have commands to be written in a special way to be understood by Automator ? Perhaps third-party commands are not allowed in Automator ?

    As twtwtw has said, you environment when running Automator is NOT the same as when you are in a Terminal session.
    pwd:
    /Users/harris
    /bin/ls -dlaeO@ .
    drwxr-xr-x  349 harris  harris  - 11866 Mar 14 22:06 .
    id -a:  uid=501(harris)
    gid=501(harris)
    groups=501(harris),
    204(_developer),
    100(_lpoperator),
    98(_lpadmin),
    80(admin),
    61(localaccounts),
    12(everyone)
    $# 0
    printenv: SHELL=/bin/bash
    TMPDIR=/var/folders/zv/zvU6+bMiHTeElG+JIWOdzk+++TI/-Tmp-/
    Apple_PubSub_Socket_Render=/tmp/launch-rVMvHQ/Render
    USER=harris
    COMMAND_MODE=unix2003
    SSH_AUTH_SOCK=/tmp/launch-fH4Gt7/Listeners
    __CF_USER_TEXT_ENCODING=0x1F5:0:0
    PATH=/usr/bin:/bin:/usr/sbin:/sbin
    PWD=/Users/harris
    DBUS_LAUNCHD_SESSION_BUS_SOCKET=/tmp/launch-RIPIu6/unix_domain_listener
    SHLVL=1
    HOME=/Users/harris
    LOGNAME=harris
    DISPLAY=/tmp/launch-ttdbVO/org.x:0
    FRED=3-Mar-2009
    _=/usr/bin/printenv

  • When i plug in my mini, i get "USB not recognized"

    As i said in the title, when i plug this in i get the USB not recognized. I know its gotta be a problem with the ipod, as i plug in my own, it works fine, but when i plug in this one with the problem, it gets this message. Does anyone have any idea on what to do?? I could use some help. Thanks.

    Ive rebooted it and reset it, and i can not reformat it because the computer doesnt recognize it. any other ideas?

  • Ftp commands not recognizing local file locations

    Hi folks. I'm trying to design an application (middleware) which takes advantage of the shell to send via ftp, a file to a remote server.
    The login works, but it won't recognize a local path:
    ftp -v -u "ftp://username:[email protected]/subdir1/" ///library/webserver/documents/domain1/alpha.txt
    I have to have focus in the directory where the file is located in order for this to work:
    cd /library/webserver/documents/domain1/
    ftp -v -u "ftp://username:[email protected]/subdir1/" alpha.txt
    But that adds another step to the process, and it doesn't do me any good.
    Is there something I'm missing, or do I have to use that to provide focus in that command? I thought the command would have taken care of it.
    Cheers

    Yeah I have had that same problem. Now, I can't even connect to any ftp sever outside of the network (or maybe even not at all). I need help. No matter what I try, it won't work on my computer. I've used System Preferences, Safari, Finder, and even Terminal. The problem appears to be only on my computer, but similar problems like login problems have appeared every once in a while on computers in the same network as me.

  • Command Line Recall (Korn Shell) - Last Command Not Blank

    I'm using emacs for command line recall, so I use the up and down arrow keys, which work fine.
    However, I come from a Tru64 background, and when I go back through the commands, and then come forward again, I expect to be able to go past the last command entered and return to a blank command line, so if I don't want to choose anything from history I can enter a new command. What's happening for me on the Solaris box I am now working on is that going forward in history sticks on the last command entered, so I have to backspace it to enter anything new.
    Any ideas on how I can change this behaviour?

    Kevin,
    Python has some great libraries to do what you are asking in the Unix enviornment:
    To get enviornmental variables:
    ====================
    import os
    # store the env var audit_username in a variable; if it doesn't exist, use 'davew' as the default
    username = os.getenv("audit_username",default='davew')
    To run Unix commands:
    ====================
    import commands
    # run a command from unix (example from Python manual
    commands.getstatusoutput('ls /bin/ls')
    Dave Warner

  • When I try to download FF 7.0 it arrives as zero bytes and I get a "not recognized" dialog on my Mac running Lion

    I think all the details are in the question itself

    Try to download the file from this side and save the dmg file to the desktop.

  • New Pioneer DVD drive not recognized in profiler

    I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
    I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
    A big thank you to anyone who can help me through this.

    Since your computer's Apple Hardware Test is on a disc and the built-in optical
    drive won't work, you may have to see if an external optical drive capable of
    being used as a boot, is available. This of course would be a FireWire combo
    type drive that can read & write DVD & CD media and boot Macs.
    You may have to see if you can archive anything worth saving from that eMac
    and put it on media via another computer; if the eMac can be booted into
    Target Disk Mode where it is seen by another computer as a FireWire drive.
    In fact, you could see (in a reverse scenario, perhaps?) if another computer's
    optical drive could be used by your eMac, if a second healthy computer is
    available & then boot it into FireWire Target Disk Mode to see if you can use
    the optical drive in there as though it were a peripheral. - This may not work.
    I've not had to really use FireWire Target Disk Mode, but do have cables,
    and an externally enclosed LaCie FW HDD which is partitioned for clones.
    There are times where a FireWire externally enclosed superdrive is handy.
    There may be some damage on the logic board or some circuit that does the
    controlling of ATA devices on one of the buses in the computer. That would
    be a possible cause of the issue. If the identity of this drive can be changed
    by the user before it is installed, be sure that is set correctly for use in eMacs.
    {The three eMacs I've owned, had issues early on and I got rid of them in mere
    days of first purchase; at considerable distance and effort by me. Then I got
    an iMac which was an unholy terror to debug after an 'authorized service' ctr
    did their best to kill logic boards and sell me defective store-brand RAM they
    were authorized to install in a place I was not. ThreeThousand Miles and Six
    Months later, I finally got my iMac back, repaired. Only because Apple told
    them to read my test notes - & just install the parts I said it originally needed.}
    Do you have a second Mac nearby (presuming yes, and using it online) which
    may be used to attempta further diagnostic or testing of the eMac?
    Not sure if an Apple Hardware Test would be sufficient to tell the issues in
    your computer; if you have a way to make use of it via external FW. Hope-
    fully someone with more extensive eMac and drive experience will advise.
    Good luck & happy computing!

  • Ipod not recognized in accord 2014

    I have a brand new 2014 accord, when plugging in the ipod touch I get a not recognized message.  I get the same thing when I plug in my ipod shuffle.  If I connect my older ipod classic player it works?

    Contact the car manufacturer. Not all devices/iOS versions are compatible with all car systems

  • Command not found on running binary files.

    I have a very strange problem with my new arch installation, which I never faced on other linux installations/distros.
    I'm trying to execute binary files from android-sdk, which I have them from other distros and always worked, and I get always "command not found" message. For e.g I tried to run adb(5 different files from different places), from terminal and from the folder in which is each and all times I get "command not found" message.
    Some other work though, as eclipse binary. All files I've tried worked fine, and also work fine if I run them from Ubuntu installation.
    I had this problem and for some newly isntalled packages too, as packagkit, and rutorrent. Packagekit worked after a reboot, but rutorrent gives same message.
    Any help?

    user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ QtADB
    bash: QtADB: command not found
    user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ ./QtADBbash: ./QtADB: No such file or directory
    user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh ./QtADB
    ./QtADB: ./QtADB: cannot execute binary file
    user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh QtADB
    QtADB: QtADB: cannot execute binary file
    user-arch@archusrxpc /home/@solushome/user-solus/QtADB-cwm_edition $ ls -l
    σύνολο 2940
    -rw-rw-r-- 1 user-arch 1000    5259 Απρ  13  2012 Changes.txt
    -rw-rw-r-- 1 user-arch 1000   25330 Ιούν 26  2012 debug.log
    -rwxrwxr-x 1 user-arch 1000 2970612 Απρ  13  2012 QtADB
    drwxr-xr-x 1 user-arch 1000       0 Ιούν 26  2012 tmp
    drwxrwxr-x 1 user-arch 1000     366 Μάρ  13  2012 tools
    user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $
    Last edited by dancer69 (2013-01-17 18:30:23)

  • IPhone not recognized in iTunes when using WiFi sync

    I have found that my iPhone is frequently not recognized when using WiFi sync.  The only way to sync my phone when that happens is to use the old fashioned way--connect it to my computer via USB.  Then the phone is recognized and syncs fine.  The device shows even when I take my iPhone off power.  But when I close iPhone and later reopen it and plug in my iPhone to power, often it is not recognized.  I've tried everything I can think of but nothing works.
    Any ideas?
    talbryn

    I am having the same problem.  It was working just fine and then just mysteriously stopped showing up in iTunes (my iPad still shows up & syncs via wifi just fine--it is just my iPhone).  Someone please reply soon, this is driving me nuts! Thanks in advance!!

Maybe you are looking for