Power Shutdown/startup Process
We are going thru building power maintenance activity and my question is, is there any Cisco recommened or process or practicse for shutdown/startup the Telepresence devices and VCS, TCS, MUC.
Hi Mahesh,
We need to follow standard procedure as mentioned in the admin guides, like for VCS it is (Maintenance > Restart and then click Restart System )
HTH
Manish
Similar Messages
-
Hi experts
I am new to VM
Could you let me know the shutdown startup process for oracle vm manager/server on windows and linux
thanksHi,
Not sure precisely what you are after here, but....VM Server is your xen based hypervisor that hosts your guest virtual machines. VM manager is the web based tool you use to mange your guests and to some extent you VM Server.
In my config, I have VM Server running on a machine - it installs as the only OS. In this I have two guest machines installed.
My VM manager is installed in a OEL5 guest on virtualbox.
You can start the VM Manager independently of the Server if the manager isn't installed on the Server. Basically it will show the status of all know servers and guests; in my setup, I have to boot the VM Server manually and then I can connect to it from the VM manager and start / stop the guests
This concepts are clearly shown in the VM v3.x manual. -
Can sombody tell me how the RAC instance will start. I know like CSS is the first process to start and then what happens how everything comes up.
ThanksMaverick wrote:
thanks for the reply.
The link you have provided is for 11g i think
i Need 10g RAC startup process.
ThanksStopping the Oracle RAC 10g Environment
The first step is to stop the Oracle instance. When the instance (and related services) is down, then bring down the ASM instance. Finally, shut down the node applications (Virtual IP, GSD, TNS Listener, and ONS).
$ export ORACLE_SID=orcl1
$ emctl stop dbconsole
$ srvctl stop instance -d orcl -i orcl1
$ srvctl stop asm -n linux1
$ srvctl stop nodeapps -n linux1
Starting the Oracle RAC 10g Environment
The first step is to start the node applications (Virtual IP, GSD, TNS Listener, and ONS). When the node applications are successfully started, then bring up the ASM instance. Finally, bring up the Oracle instance (and related services) and the Enterprise Manager Database console.
$ export ORACLE_SID=orcl1
$ srvctl start nodeapps -n linux1
$ srvctl start asm -n linux1
$ srvctl start instance -d orcl -i orcl1
$ emctl start dbconsole
Start/Stop All Instances with SRVCTL
Start/stop all the instances and their enabled services. I have included this step just for fun as a way to bring down all instances!
$ srvctl start database -d orcl
$ srvctl stop database -d orcl
reference:http://www.rampant-books.com/art_hunter_rac_start_stop_cluster.htm
refer the links for more informations:
Starting and Stopping Instances and Oracle Real Application Clusters Databases
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/dbinstmgt.htm#BCEBGHHC
Server Control Utility Reference
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/srvctladmin.htm
answered by ssolbach
Just a minor comment on the stop nodeapps.
While it is fine to stop the nodeapps on the server, the drawback to this is, that the VIP will not failover if you stop the nodeapps, but will be stopped.
Hence if you only shutdown one server, then you are causing clients to fail to connect to the VIP and having to wait for the TCP/Timeout.
So if you are not going to shut down all the server, but just want to shutdown one node, you should failover the VIP the the other node.
See: Note 749160.1 Vip Does Not Failover When Nodeapps Stopped
So it is sometimes better instead of stopping the nodeapps, to simply shutdown the cluster with crsctl stop crs (which will failover the VIP).
Sebastian
reference:-
Re: RAC Questions -
SAPConsole tasks in shutdown & startup
Hi,
We are going through an upgrade process and about to go live, can some one tell about SAPConsole tasks in shutdown & startup checklists like.
1) What needs to be done.
2) When it needs to be done. (Before, shutdown, reconnect, initial checks, business validation, after.)
3) Dependencies on other tasks.
If there are detailed how-to instructions, please let me know.
Thanks,
Mikedone...no help needed.
Thanks -
Tomcat : exception during startup processing
Hi !
I have this exception when trying to start Tomcat :
Starting service Tomcat-Standalone
Apache Tomcat/4.1-dev
Starting service Tomcat-Apache
Apache Tomcat/4.1-dev
Exception during startup processing
java.lang.reflect.InvocationTargetException:java.lang.NoSuchError:java.lang.Runtime: method addShutdownHook(java/lang/Thread;)V not found
at org.apache.catalina.startup.Catalina.start (Unknown source)
at org.apache.catalina.startup.Catalina.execute(Unknown source)
at org.apache.catalina.startup.Catalina.process(Unknown source)
at java.lang.reflect.Method.invoke (Native Method)
at java.lang.reflect.Method.invoke (Compiled Code)
at org.apache.catalina.startup.Bootstrap.main (Compiled Code)
I have imported the jdni.jar in my jdk 1.2.2, and set variables (PATH, JAVA_HOME, CATALINA_HOME, CLASSPATH), and I don't have Apache.
Please, help me if you have any idea !
Gaelle.Hi,
I got this error too when I installed Tomcat 3.2.1 on JDK1.2.2. But when I changed by JDK to 1.3.1 and altered the tomcat.bat file to take JAVA_HOME to jdk1.3.1 path, it worked fine.
Change your JVM to JDK1.3.1 and this should get rid of the error.
Regards,
Seetesh -
I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive, how can I fix this
I've tried it but since I'm using a USB disk drive it keeps freezing up or showing you a folder blinking folder with a question mark. (?). When I start the mac up I hold the control button until the Mac OS install disk shows up. My hard drive doesn't show up anymore. Is there any other button I have to hold down to bring a different menu up. I have also tried to boot up holding control and C and nothing happens. Thanks for the help so far
-
Slow Shutdown & Startup on MacBookPro OS ML 10.8.2
I have faced slow shutdown & startup on my MacBook Pro Late 2011 , OS X Mountain Lion 10.8.2 for a while.
I have done searching for solution and had tried some but no luck.
Could someone please help.
Thanks!
Below are the message from console
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 com.apple.launchd[1] (com.apple.ShareKitHelper[258]): Exited: Killed: 9
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] (com.apple.PackageKit.InstallStatus[394]): Exited: Terminated: 15
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] (com.apple.PackageKit.InstallStatus): Throttling respawn: Will start in 10 seconds
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] ([0x0-0x11011].com.apple.inputmethod.ironwood[203]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=143
Dec 24 23:07:28 --- last message repeated 1 time ---
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.talagent[159]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=243
Dec 24 23:07:28 MacBook-Pro.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=41995 Died
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=159
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=100
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] ([0x0-0x1a01a].com.apple.AppleSpell[235]): Exited: Terminated: 15
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.UserEventAgent-Aqua[149]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.storeagent[255]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[239]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] ([0x0-0xc00c].com.apple.iTunesHelper[185]): Exited with code: 1
Dec 24 23:07:28 MacBook-Pro.local WindowServer[101]: CGXGetConnectionProperty: Invalid connection 38659
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 MacBook-Pro.local loginwindow[48]: DEAD_PROCESS: 48 console
Dec 24 23:07:28 MacBook-Pro.local airportd[395]: _doAutoJoin: Already associated to “Internet_Mobility”. Bailing on auto-join.
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=131
Dec 24 23:07:28 MacBook-Pro.local WindowServer[101]: CGXGetConnectionProperty: Invalid connection 38659
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 MacBook-Pro.local shutdown[396]: halt by Keant:
Dec 24 23:07:28 MacBook-Pro.local shutdown[396]: SHUTDOWN_TIME: 1356361648 592277This fixed mine
> sys pref
>network
>Advanced
> DNS
check DNS numbers are correct, mine was showing the router and greyed out so I added my IP specific numbers
>Restart (not sure if you need this step but I did it)
Page loading improved significantly from very slow to acceptable on some to blistering fast in others
AND emails just flew out really quickly
Also make sure you have the right ports for your IP because I had been given an alternate one to try and that upset the incoming messages
>Mail
>preferences
> advanced
> port (you can find this by searching your the help section of your IP) -
While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.
If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
Here is an article from the apple support website on setting the ipod to disk mode.
http://docs.info.apple.com/article.html?artnum=93651
If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
http://depot.info.apple.com/ipod -
Firewire 800 Port back to life after power shutdown?
I experienced a strange event and would like to share it with you for feedback and comments.
During several days the external hard disk connected to the Firewire 800 port of my IMAC caused me increasingly problems, and eventually the disk would not mount at all on the desktop. I connected the disk to the FW800 port of my portable and the disk worked quite fine. I concluded that the FW800 port of the IMAC was damaged. I was preparing myself to contact Apple to get the IMAC repaired.
Then recently we had a general shutdown of power in our town, for several hours.
When the power came back, I had the idea to reconnect the external disk to the FW800 port, and miracle, the disk mounted immediately and has been working fine since.
Is is possible that the ports of the computer come back to life after a power shutdown? How is this possible?
Can I conclude that it is recommended to disconnect a computer from time to time, just to reset some parameters?Yep, both USB and Firewire ports can get in into a "bad state" and only complete removal of power will reset those chip sets.
Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now plug stuff back in & start up the Mac. Now see if your USB or Firewire ports work any better.
Even Apple acknowledges this occasional issue...
What to do if your computer won't recognize a FireWire or USB device
http://support.apple.com/kb/HT1317?viewlocale=en_US
Best of luck!
Patrick -
startup process begins normally...
grey screen - then the apple - then the spinning wheel -
sometimes shuts down during spinning wheel, sometimes it gets to the blue screen then shuts downZap the PRAM and Reset the SMC, then try again. If no go, Bboot with the SL install disc, launch Disk Utility, repair the disk, and restart normally. If that doesn't do the trick reinstall SL and then run Software Update if that does.
-
Shutdown/Startup database from java
Hi,
I need to execute shutdown/ startup database commands from a java application. I have tried wrapping these in sql / sh file using Runtime.getRuntime().exec("z:\\sql\\shut.sql"), but keep getting:
java.io.IOException: CreateProcess
any ideas ?
thanks,
DaphnaHi,
I don't see why the 11g Drivers won't work for earlier releases of the DB as long as you follow the steps in the documentation. Have you tried it? -
DATABASE SHUTDOWN 후 STARTUP시 ORA-7445가 발생하면서 OS PROMPT로 빠짐
제품 : ORACLE SERVER
작성날짜 : 2002-04-10
DATABASE SHUTDOWN 후 STARTUP시 ORA-7445가 발생하면서 OS PROMPT로 빠짐
=====================================================================
Server Platform : Sparc Sunw Ultra Enterprise 10000
(CPU 44개, Main Memory 9 Megabytes)
ORACLE RDBMS 7.3.3.4
ORACLE PARALLEL SERVER 환경
Sun Cluster Volume Manager 2.0
DB size : 약 1.2 Terabytes (=1200 Gigabytes)
관련 TAR : 9168089.7
조치 내역 :
1. init.ora에 다음의 event와 hidden parameter를 설정
1) event="10210 trace name context forever, level 10"
(Data Block Integrity를 check, Refer to Note 21184.1)
2) event="10211 trace name context forever, level 10"
(Data Block Integrity를 check, Refer to Note 21185.1
3) dbblock_cache_protect = true (Refer to note18144.1)
corrupt된 block이 memory에 load되는 것을 방지
2. Startup mount 후 recover database를 실행
ORA-600[6593] [26]발생 - Detection of block corruption
3. alter database open 실행
ORA-1578 file#88 block #172628 발생 하였으나
ORA-7445 없이 open됨
(문제가 되는 특정 테이블과 데이타 블럭 발견)
4. 위의 file block에 data를 확인하기 위하여 block dump를 함
"Alter session set events 'immediate trace name
blockdump level xxxxx"
( xxxxx는 Data Block Address 값의 decimal 값)
- Block dump에 있는 hexa값을 ascii로 변환
5. corrupt된 block을 제외한 data를 recover하기 위하여 새로운
tablespace를 생성 후 다음 실행.
"Insert into (TABLEA) select * from (TABLEB)
where index_column > ' '
and rowid not like 'corrupt된 row의 rowid들';"
(TABLEA는 corrupt되지 않은 row들을 제외한 나머지 row들을
포함할 새로운 테이블이고, TABLEB는 corrupt된 row들을 갖고
있었던 기존의 테이블)
6. 새로 생성한 테이블의 데이타 확인한 후 기존의 corrupt된
테이블 drop시킴
7. 새 테이블을 rename하여 기존의 테이블 이름과 같게 함. -
Boot drive in Bay 3 or Bay 4 will it slow down the startup process?
If I have my boot drive in Bay 3 or Bay 4 will it slow down the startup process? I know in old PCs it would look for the boot drive by looking each time in a certain order. If the MP did that then it would probably look at Bay 3 and Bay 4 last on its ordered sequence.
But.... I think there is a but here... Mac OS does still look for other boot drives none the less.
On a PC, most have an option in the BIOS to set the device types (CDROM, hard drive, USB). and the order of hard drives to look. Meaning that I can have a system on a hard drive that is off line, pop it in, make it the primary boot device and boot from it, and boot quickly.
Sometimes people will disable a chipset or not enable hardware RAID on the motherboard.
Startup Disk control panel sets the boot path in nvram and even if you do have 4 boot drives in Mac Pro, it should still boot in 20-45 seconds. -
There was a power shutdown, and the time capsule is not working when power came back. The light is orange. What do I need to do?
Tell us the model number of the TC.. eg
A1254 Gen 1 A1302 Gen 2 A1355 Gen 3 are moulded into the rubber base mat first line. Gen4 is A1409 and written on the paper label where it always should have been.
Is the LED flashing at all.. if it is solid orange (amber) then the TC has failed to boot.. this is due to faulty hard disk or faulty power supply.
Try power down the TC and leave it off for several hours.. then power up again. Place your hand on it to feel or listen to the fan spin up immediately on power on.. and hard disk spin up after about 20sec.
Tell us the exact sequence the LED and ethernet port leds go through.
This is the normal sequence.
It should flash green.. then go solid amber.. the ethernet port leds will flash very quickly.
After about 1min (bit less or more depending on the model) the LED should go to flashing amber.. then if everything is good, green. -
Startup process gets longer and longer
Hi, my parents have an iMac (purchased in 09) running OS X 10.9.5. Over the years and especially lately, the time it takes to startup has gotten longer and longer.
Any advice or suggestions would be much appreciated.Babowa,
Below are the results of running etrecheck and I apologize for taking so long getting the results to you! Thanks very much!
Problem description:
Startup process takes longer and longer (especially lately)!
EtreCheck version: 2.1.5 (108)
Report generated December 19, 2014 at 12:29:58 PM PST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (20-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:4:4
Disk Information: ℹ️
Hitachi HDT721032SLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.88 GB (275.79 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Conduit [Remove]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Launch Agents: ℹ️
[running] com.zeobit.MacKeeper.Helper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Skype UNKNOWN (missing value)
Documents FolderHidden (/Users/[redacted]/Documents)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
Silverlight: Version: 4.0.60129.0 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Dic's Thumb Drive [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
54% Mail
7% WindowServer
4% HP Device Monitor
4% NotificationCenter
3% opendirectoryd
Top Processes by Memory: ℹ️
198 MB Mail
112 MB mds_stores
94 MB Microsoft Word
82 MB WindowServer
77 MB Safari
Virtual Memory Information: ℹ️
1.45 GB Free RAM
1.63 GB Active RAM
460 MB Inactive RAM
483 MB Wired RAM
422 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 19, 2014, 12:26:32 PM Self test - passed
Maybe you are looking for
-
Keyboard producing extra letters when typing and impacting system performance
I’m having some issues with my Mid-2010 MacBook Pro 15. The Apple tech guy was baffled at the symptoms I was experiencing; he was unable to help (the MacBook Pro itself has not been inspected) so I thought I would see if anyone else had a view as to
-
MacBook won't detect projector
Aloha, I am using a MacBook with OSX 10.4.11. I am trying to get the machine to pick up an external display, a cannon projector via a DVI adapter. Before I upload the new system on the machine with my preferences I was able to connect and see the ext
-
Password denied on newly created user accounts
I have an admin account on my Mac with no problems. However if I add additional accounts, no matter the name/password, it denies the password when I try to log in with those new accounts. Yet the original admin account is fine. I've tried changing th
-
Mobile apps not showing in itunes after upgrade
After upgrading to iTunes 10.5.1.42, the apps I've purchased no linger show in the library listing. They are still on my Windows 7 machine in the folder ...\music\iTunes\iTunes Media\Mobile Applications. They just do not show in iTunes. Does anyon
-
Grid installation issue with GNS - 12c on oel6
I am trying to install the Grid (CW) for 12c on oel 6, on 2 nodes, using *static configuration*, for a flex cluster. My nodes are all running dnsmasq as DNS, and the /etc/hosts file is edited to be the same on them. The public/private/VIP/scan addres