Power Solution for the 350 Series products

Because of distance constraints and the environment I run fiber and a 2 conductor copper wire to each of my access points' locations. The 2 conductor copper wire provides the low voltage DC which powers the access point. The AUI to Fiber transceiver was then powered through the AUI port on the access point. This worked great with the Aironet 4800 series products. I'm looking to deploy the 350 series products but I have not found a clean solution that will allow me to continue to deploy the access points in this manner. Has anyone found a solution or know of a company that has a product or solution. Basically I need a 48 Vdc Fiber to UTP transceiver / power injector, 48 Vdc Input - 48 Vdc Output on pins 4,5 (-) and 7.8 (+) RJ-45 Jacks, 10/100 Ethernet compatible.

What are your distances like? I've successfuly run 350s over crappy (I mean real crappy, full of splices, etc) old POTS-grade lines up to 440 feet. You might be able to get further with quality Cat 5, or better, cable. You might have to step down the speed and/or duplex of the Ethernet ports on both sides to get it to work. Between 440 and 500 feet, I can still show a link light, but can't pass layer 3 data, haven't tested further to find out why; could be attenutation on the wire, in which case maybe running larger gauge wire would help.

Similar Messages

I am trying to find a power supply for the sony DRX-720 DVD/CD AND THE PRICE

I am trying to find a power adapter for the sony DRX-720UL DVD/CD Rewritable Drive and the cost?

All product support for CD/DVD drive, tape backup, or magneto-optical drive peripherals, including repair status, is available from Storage by Sony.
NOTE: Contact and other information can be found on the Storage by Sony Web site at http://www.storagebysony.com/
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

I'm looking for Failover/High available solutions for IPS 4200 Series

Hi all,
I tried to find out Failover/High available solutions for IPS 4200 series,I didn't saw failover solutions in IPS guide document. Anybody can be help me!

I do not know if this is documented anywhere, but I can tell you what I do. As long as the IPS 4200 has power, with the right software settings, the unit can fail such that it will pass traffic. Should the unit loose power, it does stop all traffic. I run a patch cable in parallel with the in line IPS unit, in the same VLAN, with a higher STP cost. Thus all traffic will traverse the IPS unit when possible, but should something happen to it, a $10 patch cable takes over.
Mike

Where can i find a Power Adapter for the IdeaPad A2109?

How are you?
Looking for another Power adapter for the A2109....
Havnt found the original in eBay...
Is anyone knows where can i find the Power adapter?
If not the original - is there any generic alternative that in good quality?
Any details? please feel free to provide!
Thanks a lot!!!
Solved!
Go to Solution.

b.t.w: charging is only by the USB port, am i right?
One of these could suite?
http://www.ebay.com/itm/New-Ariic-5V-2A-2000mA-AC-DC-USB-OUTPUT-Wall-Charger-for-Tablet-PC-Cell-Phon...
http://www.ebay.com/itm/5V-DC-2000mA-USB-Wall-Home-Charger-Adapter-Supply-MP3-MP4-EU-Plug-High-Quali...
http://www.ebay.com/itm/5V-1-5A-7-5W-EU-Wall-Mount-USB-Power-Adapter-Travel-Charger-Mobile-GPS-MP4-u...
http://www.aliexpress.com/item/Ainol-years-novo7-Ares-charger-5v-1-5a-usb-original-adapter/693452820...
http://www.aliexpress.com/item/For-UZONE-F6-advanced-WISE-Tablet-PC-5V-2A-USB-Plug-Power-Supply-Adap...
Is it right that a lower ampere in the adapter = better battery life?
Thanks for all of your help!

Can I buy iMac power cables for the UK?

I am moving to the UK from the US and I have several Apple products. I would like to know if I can buy a replacement cable for each of them (iMac, MacBook Pro, Apple TV, MacBook Air) that will fit into a UK power plug. All are fairly recent purchases (less than 2 years old) and I don't want to replace them. I can fit the World converter plugs on my Ipod and iPhone chargers, but they wont fit on the laptop chargers.
Thanks!
john olson | mandeville, la

All you need is an UK IEC power cord for the iMac (see image) and adapters for the Macbooks and the Apple TV.
The power supply in iMacs, Macbooks and Apple TV is an auto switching power supply that will accept voltage between 100 and 240V
Any standard european IEC power cord will do, you do not have to by one from Apple, but the Apple one as a extra round plastic part that will fit snugly in the iMac. (see second image)
Using a adapter is also an option for the iMac, but they tend to fit loosely on the US plug and can be more easily disconnected than a real European cord. If you go with only adapters, make sure you get good ones that will fit tightly on the us plug.

Where can I buy a car power plug for the canon HF R500 cam

Cigaret lighter plug would be great so the battery don't run down. Looked and looked.. Can find one..

Hi Flyingcam!
Thanks for posting.
Canon does not make a car power adapter for the VIXIA HF R500.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Why is the power supply for the Mini so big?e

Can anyone explain why the power supply / adapter for the mac mini is so big compared to the power adapters for the macbook? The processor and hard drive for the mini is the same as those for the macbook, so why is the power brick so much bigger? Just curious.

While I doubt anyone who knows for sure will be prepared to pop up and answer, I suspect the reason is two-fold: firstly that the supply is engineered for constant use, 24/7, where laptop supplies are not, and thus it is larger because the components are more rugged and over-specced, and secondly for lowest cost, since it is cheaper to engineer a larger product of this kind than a smaller one, due to the premium cost of the smallest narrow-tolerance components.

Power Spec For the WS-C6509-E Switch

I just need to know where to look for the power requirements for the WS-C6509-E Switch.

Hi,
Here you go:
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin0900aecd8017a5e7.html
" The 6- and 9-slot chassis are designed to scale beyond 4000W power supply configurations. In the future they will support 6000W power supplies.
The minimum power supply required is 2500W or higher (AC or DC) for the 6- and 9-slot chassis."
HTH,
Bobby
*Please rate helpful posts

My solution for the "Error -50" and/or "Syncing" problem

Hi
After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
How have I solved this problem => also with the help and tips from other forums.
Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
=> first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
=> then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
What did I do to solve this problem!
1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
2. I used "Disk Utility" to repair the disk permissions.
3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
4. and did again a "repair disk permissions"
5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
=> conclusion : the problem has to be in my iPhoto library
8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
=> I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
9. Sync could be started ... Youpi!
After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
How solving this problem?
1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
2. What did I do?
2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
=> VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
2.3. Then I imported all exported pictures.
=> if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
I hope this also works for other people with the same problem.
Greetings
P@nt@ni

Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
1. All rebuilding options in iphoto didn't resolve the problem.
2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
<key>1741</key>
<dict>
.. titles, filenames, ....
</dict>
After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
6. Now all of my photos sync well.
.. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
My versions:
iPhoto 5.0.4 (263)
iTunes 5.0.1 (4)
OS X 10.3.9
iPod Nano 1.0

When I connect my MacBook Air to iPads through a powered USB hub the power cord for the hub explodes and trips the fuse on the building. I've tried different iPads, cords, power points to no avail.

When I connect my mac air to some iPads through a powered USB hub for VPP/Configurator, the power point for the hub blows out (tripping the fuse in the building). I've tried different iPads, cords, power points and of course hubs. Also the computer has a habit of shutting down when any type of USB device is removed from it. Does anyone have any suggestions?

I've done some experimenting, and this is what I've found out:
1) The problem persists when I reformatted the USB HDD devices to ExFAT, so the problem apparently wasn't due to NTFS for Mac OS X by Paragon.
2) The problem persists even when BackBlaze is paused, so I don't think that it's due to BackBlaze.
3) The internet cuts out as soon as data begins transferring either to or from a USB HDD device and won't reconnected until I eject and unplug the device.
4) The problem affects data transfers through either USB port.

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

I have CS4 web Premium - I am trying to look at the Adobe Cloud option for the 2015 compable product. However...under my registered produst only Acrobate is listed...I also have the subject Adobe product. When I type in the serial # from the oriinal ad

I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spelling

You will have to contact support by web chat to figure out any such issues.
Mylenium

Can I use the Ipad3 power adapter for the Iphone5

Can I use the Ipad3 power adapter for the Iphone5 or vice versa?

No more than usual...
A quick search will yield the number of times this comes up.
I have been charging my 4s with mu iPad 2 charger since new

Is there a solution for the missing letter in the Arabic keyboard , IPhone 4s Os 5??

Is there a solution for the missing letter in the Arabic keyboard , IPhone 4s Os 5??

Please specify the letter you think is missing. You should be able to find all letters you need by holding down keys which generate popup menus to give you additional options.

Is there a solution for the limited time of videorecording?

Is there a solution for the limited time of videorecording?
By recording on my iPad2 there is a maximum time of 49 minutes and 51 seconds.

Hello Studio X
I have an iPad2 with 64 GB. After I start the videorecording it stops automaticly by 49 minutes en 51 seconds.
I looked in my settings and there was still enough space left. Although I do not think that the 64Gb is not the problem.
I bought myself an alternative recording app now. I hope it works properly but if the quality is OK. I do not know. I combine the recordings with my video (digitaltape) camera of Sony.
Thanks for your reply
sozave007

Power Solution for the 350 Series products

Similar Messages

Maybe you are looking for