Power State Failure

i have recently encountered power state failure issues upon sleeping/restarting or even shutting down
here are the 7 of recent minidumps
https://onedrive.live.com/redir?resid=D1E16401149EF1CC!2728&authkey=!AJaes1A5bcSpy7w&ithint=file%2crar
as you can see it happens very often and i can't see any obvious reason for it
thanks in advance

AR
Driver verified and Related to epfwwfp.sys ESET Personal Firewall driver. Fairly uncommon that ESET crashes. I would either remove it and re-install the newest version available, or use something else.
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\zigza\Desktop\032515-38187-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
Machine Name:
Kernel base = 0xfffff802`d1884000 PsLoadedModuleList = 0xfffff802`d1b5d250
Debug session time: Tue Mar 24 17:07:59.336 2015 (UTC - 4:00)
System Uptime: 0 days 0:03:45.278
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D5, {ffffcf808c1befe0, 0, fffff800b6f837d2, 0}
*** WARNING: Unable to verify timestamp for epfwwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for epfwwfp.sys
Could not read faulting driver name
Probably caused by : epfwwfp.sys ( epfwwfp+47d2 )
Followup: MachineOwner
3: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL (d5)
Memory was referenced after it was freed.
This cannot be protected by try-except.
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: ffffcf808c1befe0, memory referenced
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation
Arg3: fffff800b6f837d2, if non-zero, the address which referenced memory.
Arg4: 0000000000000000, (reserved)
Debugging Details:
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff802d1be7138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
ffffcf808c1befe0
FAULTING_IP:
epfwwfp+47d2
fffff800`b6f837d2 4c397378 cmp qword ptr [rbx+78h],r14
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0xD5
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: ffffd0003246fa20 -- (.trap 0xffffd0003246fa20)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000103 rbx=0000000000000000 rcx=0000000000000005
rdx=ffffe000acf537f0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800b6f837d2 rsp=ffffd0003246fbb0 rbp=ffffd0003246fc30
r8=ffffe000acf537f0 r9=ffffe000aed3a160 r10=fffff802d1f2a780
r11=ffffe000ac491bb0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
epfwwfp+0x47d2:
fffff800`b6f837d2 4c397378 cmp qword ptr [rbx+78h],r14 ds:00000000`00000078=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff802d1a095a8 to fffff802d19d49a0
STACK_TEXT:
ffffd000`3246f7b8 fffff802`d1a095a8 : 00000000`00000050 ffffcf80`8c1befe0 00000000`00000000 ffffd000`3246fa20 : nt!KeBugCheckEx
ffffd000`3246f7c0 fffff802`d18eed29 : 00000000`00000000 ffffe000`aaa66040 ffffd000`3246fa20 ffffd000`32470000 : nt! ?? ::FNODOBFM::`string'+0x246f8
ffffd000`3246f860 fffff802`d19dec2f : 00000000`00000000 ffffcf80`8c1bef68 00000000`8975ae00 00000000`00000000 : nt!MmAccessFault+0x769
ffffd000`3246fa20 fffff800`b6f837d2 : ffffcf80`8c1bef68 ffffd000`3246fc30 ffffcf80`8c1bef90 fffff802`d191df79 : nt!KiPageFault+0x12f
ffffd000`3246fbb0 ffffcf80`8c1bef68 : ffffd000`3246fc30 ffffcf80`8c1bef90 fffff802`d191df79 00000000`00000000 : epfwwfp+0x47d2
ffffd000`3246fbb8 ffffd000`3246fc30 : ffffcf80`8c1bef90 fffff802`d191df79 00000000`00000000 fffff802`00000000 : 0xffffcf80`8c1bef68
ffffd000`3246fbc0 ffffcf80`8c1bef90 : fffff802`d191df79 00000000`00000000 fffff802`00000000 00000000`00000001 : 0xffffd000`3246fc30
ffffd000`3246fbc8 fffff802`d191df79 : 00000000`00000000 fffff802`00000000 00000000`00000001 ffffcf80`8c1bef90 : 0xffffcf80`8c1bef90
ffffd000`3246fbd0 fffff802`d192f3ac : fffff802`d1d1da00 fffff800`b6f83540 ffffe000`af34d880 00000000`00000000 : nt!KiCommitThreadWait+0x129
ffffd000`3246fc50 fffff802`d195c280 : ffffe000`aab17040 ffffe000`af34d880 00000000`00000080 ffffe000`af34d880 : nt!ExpWorkerThread+0x28c
ffffd000`3246fd00 fffff802`d19dafc6 : fffff802`d1b87180 ffffe000`af34d880 ffffe000`aab17040 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`3246fd60 00000000`00000000 : ffffd000`32470000 ffffd000`3246a000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
epfwwfp+47d2
fffff800`b6f837d2 4c397378 cmp qword ptr [rbx+78h],r14
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: epfwwfp+47d2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: epfwwfp
IMAGE_NAME: epfwwfp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5411c86f
FAILURE_BUCKET_ID: 0xD5_VRF_epfwwfp+47d2
BUCKET_ID: 0xD5_VRF_epfwwfp+47d2
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xd5_vrf_epfwwfp+47d2
FAILURE_ID_HASH: {928c8ff5-f476-fce1-5681-eb05b940410b}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Similar Messages

Driver power state failure (Windows 8.1 pro) when downloading a program and restart.

Hey Guys,
I've been trying to fix this problem for a while now, without any solution. I have a HP ENVY 15-j035eo Notebook PC (ENERGY STAR)
which I install Windows 8.1 pro on. I start by getting all the drivers that are missing in Device Manager and updates.
Now I want to enable virtualization with Hyper -V client (All requirements are met for that). Then the computer crashes after restart with a driver power state failure. Exactly the same occurs when I install Visual Studio after restart. Here is some info from
the dump file from blue screen viewer that i get for the problem.
Dump File: 072514-5968-01.dmp
Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug Check Code: 0x0000009f
Parameter1: 00000000`00000004
Parameter2: 00000000`0000012c
Parameter3: ffffe001`43de0880
Parameter4: fffff802`a70d4950
Caused By Driver: ntoskrnl.exe
Caused By Adress: ntoskrnl.exe+156e36
Processor: x64
Really appreciate all the help I can get.

Hi,
ntoskrnl.exe is known as a kernal image for windows operating system, but hard to find the actual acuse basically according to this error message you provided in the original post, maybe a 3 rd party program or a missing file, or corrupted driver.
Please uplaod the dump file after running Driver Verifier, you can find detailed instruction in the following link (provided by Patrick Barker)
http://social.technet.microsoft.com/Forums/windows/en-US/c544b528-3c48-4720-b52c-f3bf4cff7513/bsod-last-one-stating-driverirqlnotlessorequal-tcpipsys?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support

Driver Power State Failure in Windows 8.1

hi ,
Can some one please help me for the given Error "
Driver Power State Failure in Windows 8.1 Enterprise Edition.
Earlier in my Laptop (HP envy j109 ) windows 8.1 single language edition was installed, i have just update this window with fresh installation 8.1 Enterprise Edition,
After successfully installation and activation getting "
Driver Power State Failure
error, I have installed more thn 5 times, but problem is still there.
Please help me
how can i share minidump file. plz let me know.
[email protected]

We do need the actual DMP file as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
If you are using Blue screen view, who crashed, or a similar application, don't. They are wrong at least as often as they are correct
Wanikiya and Dyami--Team Zigzag

Yoga 8.1 Driver Power State Failure

So this is my second attempt at 8.1 that works as well as 8. Very aggravating but that's old news here. All i can say is that I'd be having a fit except for the one button image of 8 with all my stuff that I just restored.
What causes the suddon Driver Power State Failure message and either freeze or crash? I could have sworn I downloaded all the correct 8.1 drivers and followed all the other suggestions here on this forum.
And, Lenovo, what about providing an 8.1 image for all your loyal cutomers that bought the first generation Yoga. Aren't you embarrased that we are all going thru this?

Hi,
How is the current situation?
If the issue persists, please upload the dump file as below methods:
To collect logs, we have two methods in forum:
1.If you concern personal information or company related information in logs, we recommend to send log files to our forum email account:
[email protected]
2.For dump file or other logs which do not contain the sensitive information, you can still use OneDrive to share them so that other community members can also provide help in analysis.
In addition, you could refer to this article to resolve by yourself:
Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE
https://msdn.microsoft.com/en-us/library/windows/hardware/ff559329(v=vs.85).aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Driver Power State Failure (BSOD) on Windows 8.1 Pro 64-bit

How do I solve this? I've attached links to 3 .dmp files as is usually required to spot trends (in fact 3 BSOD's occurred in one day, and I've attached those 3 .dmp files). I've gone through other forums and discussions on this forum, and while others
had discernible traits for the BSOD, namely things like occurrences after the PC waking up from sleep,etc. For me it occurs quite randomly, during games, browsing the net, etc. and more importantly it occurs very frequently, to the point of at least 1 BSOD
a day. My GPU drivers are up to date and I don't think it's because of that. Hope you guys can help me out...
http://1drv.ms/1vHisA7
Thanks in advance. :)

KD
These were related to your nvidia driver. There is a known issue with the current driver (yours) on some systems. As a work around I would install an older driver (at least 6 months older) until a less buggy driver is released.
BUCKET_ID: 0x9F_3_nvlddmkm_IMAGE_pci.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x9f_3_nvlddmkm_image_pci.sys
FAILURE_ID_HASH: {a47222af-fbac-bc49-47e0-2cf5d31cc673}
Followup: MachineOwner
0: kd> !irp ffffe001841c2aa0
Irp is active with 4 stacks 3 is current (= 0xffffe001841c2c00)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 2 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 ffffffffc000000e
[ 16, 0] 0 2 ffffe0017d0ba6a0 00000000 fffff800bd983af8-ffffe0017a6fd6a0
\Driver\pci nvlddmkm
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe0017e9e2040 00000000 fffff8032cd3cc30-ffffe0017e6f4830 Success Error Cancel pending
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0017e6f4830
Args: 00000000 00000000 00000000 00000000
Wanikiya and Dyami--Team Zigzag

Symptom preceding my Time Capsule Power On Failure: Apple TV2 Glitches

Hope this helps someone. I spent days re-installing the system on my my Mac Mini and re-updating my Apple TV 2 firmware in an attempt to solve the problem with my AppleTV2 and Mac Mini losing connection with each other, before the Power On Failure of my Time Capsule identified the problem was elsewhere.
For a month preceding my Time Capsule Power On failure (see below), my wirelessly-attached Apple TV Gen2 would stop in mid-stream while playing a playlist from my wirelessly-attached Mac Mini. Nothing short of quitting & restarting iTunes on the Mac Mini would re-establish a connection.
But when my Time Capsule failed and I was forced to substitute an old AirportExpress b/g base station, all the problems with the AppleTV2 losing connection to the Mac Mini disappeared!
It seems that prior to my Time Capsule failing completely FAILING it was exhibiting MINOR glitches in its wireless operation. These glitches were NOT sufficient to drop the Mac Mini or AppleTV2 from the Internet, but they were apparently enough to interfere with Bonjour networking between the two devices.
BACKGROUND
My single radio, 1TB Time Capsule failed Wednesday night, pretty much textbook as per the 1100+ replies on this thread: Time Capsule Powered Off, Won't Power Back On: http://discussions.apple.com/thread.jspa?threadID=2129872
My particular "Time Capsule Power On" failure symptoms:
- Time Capsule WiFi network disappeared
- Time Capsule the indicator light was OFF (rather than normal green, or even a flashing yellow)
- Power cycling Time Capsule initially would result in yellow light for 10-20 seconds then nothing
- With hand on the Time Capsule case I could feel the internal hard-drive spinning
- Within 1/2 hour, repeated power-cycling would result in the light NEVER coming on
- Serial no. as per http://support.apple.com/kb/TS3351 Time Capsule: Does not power on
The local Apple store Genius bar replaced my Time Capsule with a brown box 1TB, single radio unit, but would NOT transfer my data on my old Time Capsule. When I asked for assurance that my data would be erased, they said that it was Apple policy that all returned drives are destroyed. It was accept that unwritten promise or leave with my broken Time Capsule. I was NOT happy, but life is already too short – I accepted the replacement Time Capsule.

Contact a repairer in your area.. we can fix them cheaper than data recovery.. and you will get a working TC back as good as new.. in fact we can make it better than new because we can fix the fundamental flaw .. no cooling.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repairers

Yet another Nano 6th Gen with power button failure

When is apple going to put its hand up and admit there is a problem with the 6th Gen Nano. My daughters 13 month old 16gig ipod has a power button failure the same as so many others. At £120 odd its already an expensive bit of kit without having to purchase an extended warranty. Pay another £50 for a repair and another years use? I dont think so.
I notice the sales pitch boasts the new ipod has been "completely renanoed" Come on Apple why dont you look after the little people and give us a decent trade in on these faulty year old ipods against a new sorted one? Patrick

Well a robust defence of your product Apple well done!

How to change power state in a Service Profile Template

I'd like to change the setting "Power State" in a Service Profile Template. While I can change nearly every other aspect of the template, I can't find this in the UCS Manager GUI. Is this an immutable decision while creating the template? Can I change it via the CLI?

Hi Joernclausen,
What is the firmware version of your UCS?
From the CLI try the following and let me know if it works.
Go into the FI CLI and perform the steps below, ensure to enter your own template_name and select appropriate type of template followed by setting the power up or down
sj-ucs-r13-mon-A# scope org
sj-ucs-r13-mon-A /org # enter service-profile template_name initial-template
sj-ucs-r13-mon-A /org/service-profile # power up
sj-ucs-r13-mon-A /org/service-profile* # commit-buffer
sj-ucs-r13-mon-A /org/service-profile # power down
sj-ucs-r13-mon-A /org/service-profile* # commit-buffer
You may also be able to change the power state from the individual service profiles
Go to the service profile and use "Change Initial Power State" button for modifying the desired-power value.
see attached screenshot

Ipw3945: power/state file missing!

hello!
after upgrading to the new 2.6.19 kernel-suspend2 and the new ipw3945-suspend2-1.1.2 driver i can't switch the power-states of the interface, because the file /sys/class/net/wlan/device/power/state is missing!
so, how can i change the states from now on or is this a bug?
mfg iggy

no, iwconfig power is not for that!

IPhone 4s power button failure

My power button has completely failed and unresponsive. Cannot put on standby, turn off or reboot. Has anyone else got this?
I'm going to a genius bar next week as its still in warranty.

I had a power button failur on my iPhone 4 which is presumably more or less identical with regards to the power button. They had to replace the phone as they can only repaire the back glass. Take it back to the Genius Bar if possible.
My friends just had theirs swopped out with few questions asked, as it's not deemed serviable.
Mine was 14 months old so out of warranty - 199 euros was the fee

Time Capsule power supply failures

Has the chronic Time Capsule power supply failure after about 18 months use been fixed in the new Time Capsules being sold today? I had a 500GB Time Capsule I recently had to scrap because of this.

It is always possible there is another fault.. to shut down after a minute.. if you are relating that correctly.. is unusual.. I would power the board from 5v 2A supply.. that will quickly show if the issue is your power supply or not.
The TC is definitely in need of more cooling but I would hate to suggest doing a major modification until it runs out of warranty. It is possible to improve the existing cooling with a bit of smarts.. a laptop (or netbook size) cooler to which you can seal the TC.. this is the tricky bit.. you need to allow a space underneath though.. perhaps 10mm.. and seal just the edge of the TC so it allows the cooler to draw air through the TC. That will work without modifying it. But you will need to make up a proper spacer and gasket.
I see pictures of various fans mounted on the top.. they are next to useless. Cooling the outside plastic will achieve only the tiniest improvement in heat transfer due to the thick plastic (insulating) top.. if it was made out of metal maybe it would do something.
Sounds like what is also needed is a different heat sensor that would start the fan at a lower temperature.
It is not the sensor that is the issue. The TC includes a proper fan controller. It is simply set too high.. and so it doesn't turn on.
If you want to break into the TC.. you can solder in a console.. and use serial to USB adapter.. these are very cheap.. the soldering in is tricky.
See the bottom of this page.
http://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modems /apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
The envstat.. will show temp.
This command will turn on the fan.
i2cctl w 0x18 0x00 11010100

Xserve raid shows power state UPS backup

How do I change the power state from UPS backup to on like the rest of the xserve raids we have? None of the xserve raids we have ever used a UPS so I do not know why this one is showing power state UPS Backup under the information tab of the GUI.
This is annoying since it's causing the circle to be yellow instead of green. Any ideas or suggestions?

Never seen this. Does it help if you temporally disconnect the power cable?

Still presists in 10.6.8: AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - now preventing C4 low power state due to the switch ignoring pause packets

My network is constantly dropping out when transfering large files, or if there is a lot of ethernet traffic going on. For example, if I have 5 torrents runnung at the same time.
My dmesg shows:
==> /var/log/kernel.log <==
Oct 30 11:42:09 mashugana kernel[0]: Kext com.apple.iokit.AppleYukon2 not found for unload request.
==> /var/log/kernel.log <==
Oct 30 11:42:32 mashugana kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
Oct 30 11:42:32 mashugana kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
Oct 30 11:42:32 mashugana kernel[0]: yukon: Ethernet address XX:XX:XX:XX:XX
Oct 30 11:42:34 mashugana kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,7c00]
==> /var/log/system.log <==
Oct 30 11:42:35 mashugana ntpd[42]: bind() fd 25, family 30, port 123, scope 4, addr XXXXX, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
Oct 30 11:42:35 mashugana ntpd[42]: unable to create socket on en0 (11) for XXXX#123
Oct 30 11:42:38 mashugana configd[14]: network configuration changed.
==> /var/log/kernel.log <==
Oct 30 11:42:44 mashugana kernel[0]: AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SK_DRV_RX_OVERFLOW: rcv fifo overflow
Oct 30 11:42:44 mashugana kernel[0]: AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - now preventing C4 low power state due to the switch ignoring pause packets
The only answer is to hard reboot the machine as everything hangs. Even the shell in Terminal.app is stuck which is a pitty as I feel certain that kextunload/kextload AppleYukon2.kext would free the problem but I cant even get to it.
Getting real miffed with 10.6.8 as since I upgraded I have a whole host of problems with it. I cant even plug my ipod in without itunes core dumping.

BTW: what does
now preventing C4 low power state due to the switch ignoring pause packets
mean? What are the consequences?
tia.

Black screen upon wake from sleep when I change power state while in sleep

Hi,
I'm having this problem where my MacbookPro won't always wake from sleep.
OSX is 10.6.3 and fully updated.
I've done a lot of troubleshooting, and I can now replicate the issue 100%:
1 - Put the MacbookPro to sleep by closing lid
2 - Change power source (from plugged-in to battery or vice versa)
3 - open lid - MacbookPro will wake, but stays at black screen and is unresponsive.
Only if I change power state while sleeping will this issue show. Anyone else experincing this issue, and anygot got a clue on what to do?
regards,
Lasse

I've seen the same issue after upgrading to 10.6.3. I have a one year old MacBook Pro. I would have the screen be black after coming back from sleep or hibernate (tried both).
The workaround I found is to close the lid -almost- all the way and then immediately open it back up again, like I am catching the Mac going back to sleep and then changing my mind. For whatever reason, this has been reliably solving my issue for the last couple weeks reliably.
Only other oddity I noticed is that immediately after upgrading OS X told me that my one year old battery needed to go in for servicing...
Anyway, now all looks right with the world assuming you don't mind a quick close/open cycle.. Lovely...
Tim

[system diagnostic report - power stats ] My mac book pro had been only 2weeks.. and

My mac book pro had been only 2 weeks, it is brand new.
However, when i started to install LOL(league of legends), it's keep rebooting with white screen.
I went over to system log,
and it said
Sep 29 02:35:06 Minui-MacBook-Pro.local spindump[597]: Saved diag report for powerstats version com.apple.SystemStats.PostInstall to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023506_Minui-MacBook-Pro. diag
Sep 29 02:35:07 Minui-MacBook-Pro.local spindump[601]: Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023507_Minui-MacBook-Pro. diag
Sep 29 02:35:07 Minui-MacBook-Pro.local spindump[602]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023507-1_Minui-MacBook-Pr o.diag
Sep 29 02:35:07 Minui-MacBook-Pro.local spindump[603]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023507-2_Minui-MacBook-Pr o.diag
Sep 29 02:35:08 Minui-MacBook-Pro.local spindump[604]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023508_Minui-MacBook-Pro. diag
What is exactly power stat report is?

Richardfromsharon wrote:
the screen is freezing on a black screen
MacBook Pro: Distorted video or no video issues . The affected computers were manufactured between approximately May 2007 and September 2008.

Power State Failure

Similar Messages

Maybe you are looking for