Power stats?
Hi,
I've recently heard that Xserve contains a wide range of power
sensors, and that some server management software can report
power dissipation stats. However, I haven't been able to find
exactly: (1) the list of sensors, (2) the name of the management
software that I can use to generate statistics.
I've skimmed the basic Xserve documentation, but couldn't find
what I'm looking for.
Ideally, I would like to access these sensors from my own
software and perform the readings when needed.
Thank you. Kind regards and happy holidays,
Domagoj
Thanks Camelot for replying so quickly.
Can Server Monitor also track power dissipated by memory/CPU/disk/motherboard?
If yes, two sub-questions:
1) Are those real measurements, or estimates computed from
temperature/fan_speed/voltage measurements?
2) Can I access the sensors from my own code? (I.e., are the detailed
motherboard specs and programming manuals available?)
Thanks. Kind regards,
Domagoj
Similar Messages
-
Hey Guys,
I've been trying to fix this problem for a while now, without any solution. I have a HP ENVY 15-j035eo Notebook PC (ENERGY STAR)
which I install Windows 8.1 pro on. I start by getting all the drivers that are missing in Device Manager and updates.
Now I want to enable virtualization with Hyper -V client (All requirements are met for that). Then the computer crashes after restart with a driver power state failure. Exactly the same occurs when I install Visual Studio after restart. Here is some info from
the dump file from blue screen viewer that i get for the problem.
Dump File: 072514-5968-01.dmp
Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug Check Code: 0x0000009f
Parameter1: 00000000`00000004
Parameter2: 00000000`0000012c
Parameter3: ffffe001`43de0880
Parameter4: fffff802`a70d4950
Caused By Driver: ntoskrnl.exe
Caused By Adress: ntoskrnl.exe+156e36
Processor: x64
Really appreciate all the help I can get.Hi,
ntoskrnl.exe is known as a kernal image for windows operating system, but hard to find the actual acuse basically according to this error message you provided in the original post, maybe a 3 rd party program or a missing file, or corrupted driver.
Please uplaod the dump file after running Driver Verifier, you can find detailed instruction in the following link (provided by Patrick Barker)
http://social.technet.microsoft.com/Forums/windows/en-US/c544b528-3c48-4720-b52c-f3bf4cff7513/bsod-last-one-stating-driverirqlnotlessorequal-tcpipsys?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support -
Driver Power State Failure in Windows 8.1
hi ,
Can some one please help me for the given Error "
Driver Power State Failure in Windows 8.1 Enterprise Edition.
Earlier in my Laptop (HP envy j109 ) windows 8.1 single language edition was installed, i have just update this window with fresh installation 8.1 Enterprise Edition,
After successfully installation and activation getting "
Driver Power State Failure
error, I have installed more thn 5 times, but problem is still there.
Please help me
how can i share minidump file. plz let me know.
[email protected]We do need the actual DMP file as they contain the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
If you are using Blue screen view, who crashed, or a similar application, don't. They are wrong at least as often as they are correct
Wanikiya and Dyami--Team Zigzag -
How to change power state in a Service Profile Template
I'd like to change the setting "Power State" in a Service Profile Template. While I can change nearly every other aspect of the template, I can't find this in the UCS Manager GUI. Is this an immutable decision while creating the template? Can I change it via the CLI?
Hi Joernclausen,
What is the firmware version of your UCS?
From the CLI try the following and let me know if it works.
Go into the FI CLI and perform the steps below, ensure to enter your own template_name and select appropriate type of template followed by setting the power up or down
sj-ucs-r13-mon-A# scope org
sj-ucs-r13-mon-A /org # enter service-profile template_name initial-template
sj-ucs-r13-mon-A /org/service-profile # power up
sj-ucs-r13-mon-A /org/service-profile* # commit-buffer
sj-ucs-r13-mon-A /org/service-profile # power down
sj-ucs-r13-mon-A /org/service-profile* # commit-buffer
You may also be able to change the power state from the individual service profiles
Go to the service profile and use "Change Initial Power State" button for modifying the desired-power value.
see attached screenshot -
Ipw3945: power/state file missing!
hello!
after upgrading to the new 2.6.19 kernel-suspend2 and the new ipw3945-suspend2-1.1.2 driver i can't switch the power-states of the interface, because the file /sys/class/net/wlan/device/power/state is missing!
so, how can i change the states from now on or is this a bug?
mfg iggyno, iwconfig power is not for that!
-
Xserve raid shows power state UPS backup
How do I change the power state from UPS backup to on like the rest of the xserve raids we have? None of the xserve raids we have ever used a UPS so I do not know why this one is showing power state UPS Backup under the information tab of the GUI.
This is annoying since it's causing the circle to be yellow instead of green. Any ideas or suggestions?Never seen this. Does it help if you temporally disconnect the power cable?
-
Yoga 8.1 Driver Power State Failure
So this is my second attempt at 8.1 that works as well as 8. Very aggravating but that's old news here. All i can say is that I'd be having a fit except for the one button image of 8 with all my stuff that I just restored.
What causes the suddon Driver Power State Failure message and either freeze or crash? I could have sworn I downloaded all the correct 8.1 drivers and followed all the other suggestions here on this forum.
And, Lenovo, what about providing an 8.1 image for all your loyal cutomers that bought the first generation Yoga. Aren't you embarrased that we are all going thru this?Hi,
How is the current situation?
If the issue persists, please upload the dump file as below methods:
To collect logs, we have two methods in forum:
1.If you concern personal information or company related information in logs, we recommend to send log files to our forum email account:
[email protected]
2.For dump file or other logs which do not contain the sensitive information, you can still use OneDrive to share them so that other community members can also provide help in analysis.
In addition, you could refer to this article to resolve by yourself:
Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE
https://msdn.microsoft.com/en-us/library/windows/hardware/ff559329(v=vs.85).aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
My network is constantly dropping out when transfering large files, or if there is a lot of ethernet traffic going on. For example, if I have 5 torrents runnung at the same time.
My dmesg shows:
==> /var/log/kernel.log <==
Oct 30 11:42:09 mashugana kernel[0]: Kext com.apple.iokit.AppleYukon2 not found for unload request.
==> /var/log/kernel.log <==
Oct 30 11:42:32 mashugana kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
Oct 30 11:42:32 mashugana kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
Oct 30 11:42:32 mashugana kernel[0]: yukon: Ethernet address XX:XX:XX:XX:XX
Oct 30 11:42:34 mashugana kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,7c00]
==> /var/log/system.log <==
Oct 30 11:42:35 mashugana ntpd[42]: bind() fd 25, family 30, port 123, scope 4, addr XXXXX, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
Oct 30 11:42:35 mashugana ntpd[42]: unable to create socket on en0 (11) for XXXX#123
Oct 30 11:42:38 mashugana configd[14]: network configuration changed.
==> /var/log/kernel.log <==
Oct 30 11:42:44 mashugana kernel[0]: AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SK_DRV_RX_OVERFLOW: rcv fifo overflow
Oct 30 11:42:44 mashugana kernel[0]: AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - now preventing C4 low power state due to the switch ignoring pause packets
The only answer is to hard reboot the machine as everything hangs. Even the shell in Terminal.app is stuck which is a pitty as I feel certain that kextunload/kextload AppleYukon2.kext would free the problem but I cant even get to it.
Getting real miffed with 10.6.8 as since I upgraded I have a whole host of problems with it. I cant even plug my ipod in without itunes core dumping.BTW: what does
now preventing C4 low power state due to the switch ignoring pause packets
mean? What are the consequences?
tia. -
Black screen upon wake from sleep when I change power state while in sleep
Hi,
I'm having this problem where my MacbookPro won't always wake from sleep.
OSX is 10.6.3 and fully updated.
I've done a lot of troubleshooting, and I can now replicate the issue 100%:
1 - Put the MacbookPro to sleep by closing lid
2 - Change power source (from plugged-in to battery or vice versa)
3 - open lid - MacbookPro will wake, but stays at black screen and is unresponsive.
Only if I change power state while sleeping will this issue show. Anyone else experincing this issue, and anygot got a clue on what to do?
regards,
LasseI've seen the same issue after upgrading to 10.6.3. I have a one year old MacBook Pro. I would have the screen be black after coming back from sleep or hibernate (tried both).
The workaround I found is to close the lid -almost- all the way and then immediately open it back up again, like I am catching the Mac going back to sleep and then changing my mind. For whatever reason, this has been reliably solving my issue for the last couple weeks reliably.
Only other oddity I noticed is that immediately after upgrading OS X told me that my one year old battery needed to go in for servicing...
Anyway, now all looks right with the world assuming you don't mind a quick close/open cycle.. Lovely...
Tim -
My mac book pro had been only 2 weeks, it is brand new.
However, when i started to install LOL(league of legends), it's keep rebooting with white screen.
I went over to system log,
and it said
Sep 29 02:35:06 Minui-MacBook-Pro.local spindump[597]: Saved diag report for powerstats version com.apple.SystemStats.PostInstall to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023506_Minui-MacBook-Pro. diag
Sep 29 02:35:07 Minui-MacBook-Pro.local spindump[601]: Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023507_Minui-MacBook-Pro. diag
Sep 29 02:35:07 Minui-MacBook-Pro.local spindump[602]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023507-1_Minui-MacBook-Pr o.diag
Sep 29 02:35:07 Minui-MacBook-Pro.local spindump[603]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023507-2_Minui-MacBook-Pr o.diag
Sep 29 02:35:08 Minui-MacBook-Pro.local spindump[604]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-09-29-023508_Minui-MacBook-Pro. diag
What is exactly power stat report is?Richardfromsharon wrote:
the screen is freezing on a black screen
MacBook Pro: Distorted video or no video issues . The affected computers were manufactured between approximately May 2007 and September 2008. -
i have recently encountered power state failure issues upon sleeping/restarting or even shutting down
here are the 7 of recent minidumps
https://onedrive.live.com/redir?resid=D1E16401149EF1CC!2728&authkey=!AJaes1A5bcSpy7w&ithint=file%2crar
as you can see it happens very often and i can't see any obvious reason for it
thanks in advanceAR
Driver verified and Related to epfwwfp.sys ESET Personal Firewall driver. Fairly uncommon that ESET crashes. I would either remove it and re-install the newest version available, or use something else.
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\zigza\Desktop\032515-38187-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
Machine Name:
Kernel base = 0xfffff802`d1884000 PsLoadedModuleList = 0xfffff802`d1b5d250
Debug session time: Tue Mar 24 17:07:59.336 2015 (UTC - 4:00)
System Uptime: 0 days 0:03:45.278
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D5, {ffffcf808c1befe0, 0, fffff800b6f837d2, 0}
*** WARNING: Unable to verify timestamp for epfwwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for epfwwfp.sys
Could not read faulting driver name
Probably caused by : epfwwfp.sys ( epfwwfp+47d2 )
Followup: MachineOwner
3: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL (d5)
Memory was referenced after it was freed.
This cannot be protected by try-except.
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: ffffcf808c1befe0, memory referenced
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation
Arg3: fffff800b6f837d2, if non-zero, the address which referenced memory.
Arg4: 0000000000000000, (reserved)
Debugging Details:
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff802d1be7138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
ffffcf808c1befe0
FAULTING_IP:
epfwwfp+47d2
fffff800`b6f837d2 4c397378 cmp qword ptr [rbx+78h],r14
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0xD5
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: ffffd0003246fa20 -- (.trap 0xffffd0003246fa20)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000103 rbx=0000000000000000 rcx=0000000000000005
rdx=ffffe000acf537f0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800b6f837d2 rsp=ffffd0003246fbb0 rbp=ffffd0003246fc30
r8=ffffe000acf537f0 r9=ffffe000aed3a160 r10=fffff802d1f2a780
r11=ffffe000ac491bb0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
epfwwfp+0x47d2:
fffff800`b6f837d2 4c397378 cmp qword ptr [rbx+78h],r14 ds:00000000`00000078=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff802d1a095a8 to fffff802d19d49a0
STACK_TEXT:
ffffd000`3246f7b8 fffff802`d1a095a8 : 00000000`00000050 ffffcf80`8c1befe0 00000000`00000000 ffffd000`3246fa20 : nt!KeBugCheckEx
ffffd000`3246f7c0 fffff802`d18eed29 : 00000000`00000000 ffffe000`aaa66040 ffffd000`3246fa20 ffffd000`32470000 : nt! ?? ::FNODOBFM::`string'+0x246f8
ffffd000`3246f860 fffff802`d19dec2f : 00000000`00000000 ffffcf80`8c1bef68 00000000`8975ae00 00000000`00000000 : nt!MmAccessFault+0x769
ffffd000`3246fa20 fffff800`b6f837d2 : ffffcf80`8c1bef68 ffffd000`3246fc30 ffffcf80`8c1bef90 fffff802`d191df79 : nt!KiPageFault+0x12f
ffffd000`3246fbb0 ffffcf80`8c1bef68 : ffffd000`3246fc30 ffffcf80`8c1bef90 fffff802`d191df79 00000000`00000000 : epfwwfp+0x47d2
ffffd000`3246fbb8 ffffd000`3246fc30 : ffffcf80`8c1bef90 fffff802`d191df79 00000000`00000000 fffff802`00000000 : 0xffffcf80`8c1bef68
ffffd000`3246fbc0 ffffcf80`8c1bef90 : fffff802`d191df79 00000000`00000000 fffff802`00000000 00000000`00000001 : 0xffffd000`3246fc30
ffffd000`3246fbc8 fffff802`d191df79 : 00000000`00000000 fffff802`00000000 00000000`00000001 ffffcf80`8c1bef90 : 0xffffcf80`8c1bef90
ffffd000`3246fbd0 fffff802`d192f3ac : fffff802`d1d1da00 fffff800`b6f83540 ffffe000`af34d880 00000000`00000000 : nt!KiCommitThreadWait+0x129
ffffd000`3246fc50 fffff802`d195c280 : ffffe000`aab17040 ffffe000`af34d880 00000000`00000080 ffffe000`af34d880 : nt!ExpWorkerThread+0x28c
ffffd000`3246fd00 fffff802`d19dafc6 : fffff802`d1b87180 ffffe000`af34d880 ffffe000`aab17040 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`3246fd60 00000000`00000000 : ffffd000`32470000 ffffd000`3246a000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
epfwwfp+47d2
fffff800`b6f837d2 4c397378 cmp qword ptr [rbx+78h],r14
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: epfwwfp+47d2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: epfwwfp
IMAGE_NAME: epfwwfp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5411c86f
FAILURE_BUCKET_ID: 0xD5_VRF_epfwwfp+47d2
BUCKET_ID: 0xD5_VRF_epfwwfp+47d2
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xd5_vrf_epfwwfp+47d2
FAILURE_ID_HASH: {928c8ff5-f476-fce1-5681-eb05b940410b}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
Klaptop using /proc/acpi/sleep instead of /sys/power/state
This is a problem in kde since it disables most of the features of klaptop. In other words for me at-least kde cpu frequency scaling, standby, suspend do not work through klaptop since it seems to use /proc/acpi/sleep instead of /sys/power/state which is the only thing available in the new kernel. I am not sure if this is a kde problem, my kernel problem, or just simply my particular problem.
Is there a way to fix this.
Thanks for the help,
MattIt also seems kde is not reading the current cpu frequency correctly. It seems to use/proc/cpuinfo instead of /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq to get the current frequency. In addition when clicking setup helper applications under ACPI Config in klaptop I get:
The /opt/kde/bin/klaptop_acpi_helper application does not seem to have the same size or checksum as when it was compiled we do NOT recommend you proceed with making it setuid-root without further investigation
Are other people having these problems as well or is this unique to me. -
Echo disk /sys/power/state broken
Hello all
After recent update after long time my hibernate was broken
#echo disk > /sys/power/state
does black screen and standby of display later. But system block not turned off, e.g. fans are worked.
#echo mem > /sys/power/state
is working. Before update echo mem not worked right
#cat > /sys/power/state
freeze mem disk
Install old kernel not resolve the problem.
I try to do debugging hibernation with https://www.kernel.org/doc/Documentatio … ugging.txt
echo freezer > /sys/power/pm_test
echo disk > /sys/power/state
worked
but
echo devices > /sys/power/pm_test
echo disk > /sys/power/state
not worked
If the "devices" test fails, most likely there is a driver that cannot suspend
or resume its device
Who can broke hibernation process?
dom ~ # lsmod
Module Size Used by
md5 1933 0
nfsd 232504 11
auth_rpcgss 39358 1 nfsd
oid_registry 1951 1 auth_rpcgss
nfs_acl 1995 1 nfsd
ipt_MASQUERADE 1742 1
iptable_nat 2746 1
nf_conntrack_ipv4 7754 1
nf_defrag_ipv4 1015 1 nf_conntrack_ipv4
nf_nat_ipv4 3008 1 iptable_nat
nf_nat 12791 3 ipt_MASQUERADE,nf_nat_ipv4,iptable_nat
nf_conntrack 60457 5 ipt_MASQUERADE,nf_nat,nf_nat_ipv4,iptable_nat,nf_conntrack_ipv4
iptable_filter 1092 0
ip_tables 10130 2 iptable_filter,iptable_nat
x_tables 11418 3 ip_tables,ipt_MASQUERADE,iptable_filter
arc4 1628 2
rt2800usb 15925 0
rt2x00usb 7726 1 rt2800usb
rt2800lib 56572 1 rt2800usb
rt2x00lib 33544 3 rt2x00usb,rt2800lib,rt2800usb
powernow_k8 16256 0
mac80211 389892 3 rt2x00lib,rt2x00usb,rt2800lib
hid_generic 749 0
usbhid 36545 0
ppdev 5998 0
pcspkr 1487 0
cfg80211 337508 2 mac80211,rt2x00lib
hid 71463 2 hid_generic,usbhid
psmouse 85683 0
evdev 8208 8
serio_raw 3969 0
k8temp 2782 0
crc_ccitt 1095 1 rt2800lib
rfkill 12714 2 cfg80211
snd_intel8x0 23721 0
snd_ac97_codec 89336 1 snd_intel8x0
ac97_bus 906 1 snd_ac97_codec
snd_pcm 63876 2 snd_ac97_codec,snd_intel8x0
snd_page_alloc 5942 2 snd_intel8x0,snd_pcm
forcedeth 51894 0
snd_timer 14942 1 snd_pcm
shpchp 21973 0
snd 44566 4 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm
i2c_nforce2 4975 0
soundcore 4386 1 snd
parport_pc 16611 0
parport 25369 2 ppdev,parport_pc
button 3685 0
mperf 959 0
processor 22169 1 powernow_k8
nfs 126852 0
lockd 65996 2 nfs,nfsd
sunrpc 188264 27 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41347 1 nfs
sd_mod 28311 8
ata_generic 2434 0
pata_acpi 2367 0
pata_amd 8102 0
sata_nv 17199 6
firewire_ohci 27430 0
firewire_core 44687 1 firewire_ohci
crc_itu_t 1095 1 firewire_core
libata 149201 4 pata_acpi,sata_nv,pata_amd,ata_generic
ohci_pci 3228 0
ohci_hcd 21553 1 ohci_pci
ehci_pci 3404 0
ehci_hcd 42788 1 ehci_pci
scsi_mod 108590 2 libata,sd_mod
usbcore 152939 7 rt2x00usb,ohci_hcd,ohci_pci,rt2800usb,ehci_hcd,ehci_pci,usbhid
usb_common 1399 1 usbcore
floppy 48486 0
ext4 425668 4
crc16 1091 1 ext4
mbcache 4290 1 ext4
jbd2 70221 1 ext4
reiserfs 221231 0
radeon 1119891 2
i2c_algo_bit 4583 1 radeon
drm_kms_helper 31934 1 radeon
ttm 47394 1 radeon
drm 191258 4 ttm,drm_kms_helper,radeon
agpgart 22047 2 drm,ttm
i2c_core 19967 5 drm,drm_kms_helper,i2c_algo_bit,radeon,i2c_nforce2http://www.mjmwired.net/kernel/Document … states.txt
-
T400 Penryn CPU Power States?
I i have a P8400 CPU in my T400 Vista 64 and CPUZ only reports two power states no matter whether on battery or AC. One is max 2,3ghz the other is 1,6ghz.
I have powermanager and vista set to "Optimize power plan" and have also tried to set the max frequency at 5% to test, yet the CPU does not go below 1,6ghz.
My old Core Duo had more power states, the lowest being 700 or 800 mhz.
Did i miss something to activate the C4 / Deep Sleep settings? I tried changing the bios settings with no avail.
Also do features like switching off one core when it is not needed etc (introduced in santa rosa) work without any setup or do i have to activate that somehow as well?
I would appreciate if someone could check whether their CPUs go into Deep Sleep or also have only 2 visible power states.
Thinkpad T400 (Windows 7 Ultimate x64)Hi
Welcome to the community.
As per your concern low CPU frequency occurs after wake up from the hibernate or sleep mode So to recover from this concerned issue,I would suggest you to please update the Power Manager software and Bios of your system from the below mentioned web link.
http://support.lenovo.com/en_US/downloads/default.page?
Also choose the battery in the balanced mode.
After this, please restart the notebook and check if the issue resolved.
Regarding
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Runing script of power state change
I have two scripts I want to be run on power state change - one when to battery power and the other when connecting AC.
The information of AC state is here: /sys/class/power_supply/AC/online, and the values are 0 or 1.
So I wrote a script that looks like that
if grep -Fxq "0" /sys/class/power_supply/AC/online; then
powerdown
else
powerup
fi
and added it to be run from /etc/rc.local
But it does not seem to run on power source change.
What's wrong?
Last edited by Lockheed (2012-08-25 20:10:40)When does rc.local run?
https://wiki.archlinux.org/index.php/Pm … wer_saving -
Getting Device Power State using Windbg Extension
Hi All,
I want to develop an application and debugger extension to get the current power state of my device. I know in the application side, p can use the SetupAPI to get the current power state of the device. I want to accomplish the same using WinDbg extension.
Can i use the SetupApi in Winfdbg extension? If not, what is the other way to do that?
Thanks in advance.SetupAPI can be called from windbg extension, but it will act on the host (debugger) side - not what you expect.
The power state of the device is in device_object-> _DEVOBJ_EXTENSION -> _DEVICE_OBJECT_POWER_EXTENSION.State field.
(this is undocumented secret, so don't tell anyone!)
-- pa
Maybe you are looking for
-
Is there a way to view all cameras in the timeline at once without creating a multicam sequence? Is there some kind of window I can open where they will show up? I am scrubbing a timeline and I would like to see all the cameras at once.
-
Problem with DW CC 2014.1 and the BC add on
Hi all, I have had this problem on both of my computers that I have Dreamweaver CC 2014.1 installed on. I have been using the program for some time, but suddenly on opening it I am unable to connect to BC to download a new site and start working on i
-
Run file in Windows in this file default program
Hello I want run file in my Java program. In example I click in my Java program on the "Hello.doc" text and it must run Microsoft Word. I try use: try { Runtime.getRuntime().exec("start c:\\file\\Hello.doc"); } catch (IOException ex) { System.
-
Photoshop CS3 stops working shortly after startup? Help!
Sometimes it stops working during startup, but for the most part, it starts up and when I go to open a new canvas or open a file it stops working and has to be closed. It just recently started doing this, and I've tried getting rid of it and reinstal
-
I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?