Power Supply / Support

Currently my powermac G5 is at the service department due to a failed power supply. The machine is no more than 2 months old and now I am waiting for Apple to get their power supply in stock so I can get my machine back up and running.
I'd have to say this is the worst experience I've ever had with Computer support. I've dealt with Dell, IBM, Compaq and they are all very supporative and quick regarding the repair of my machine.
The lady I spoke with intially when I first had the problem said had me try a bunch of crap that I had already done but insisted I try. When I told her I think it is a hardware failure she continued to make me try some tests. I repeated that I believed it was a hardware failure and she went on to say that there was nothing she could do and I needed to contact an authorized service provider and hung up.
Now I'm waiting for this power supply to come in, with no accurate date of arrival (still says 2/2 ship date) and my service provider is no help either. This machine is for a business and I am very lucky that we have an extra power mac to do work on otherwise we would be SOL. I would expect when purchasing apple care they have some sort of next day service as any other large PC manufacturere does.
I personally own a 15" PB but have to say Apple's customer service is the pits.

s... "Well Mr. so & so,
looks like we have to special order a screwdriver to
be able to remove the processers, to get to the power
supply, that we hope have in the next few days and
then we can get this fixed"
The processor screws strip easy too. Mine had to be replaced. Luckily, the independent Apple dealer I went to had everything in stock and had me going the same day I took it in.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
 An Apple User Group 
    MacOSG Podcast >>

Similar Messages

  • TS140 - Can Power Supply Support 6 drives?

    Hello All!
    I have a TS140 with the i3-4130 Chip inside. I am planning on adding in
    16gb 12800 ecc ram total.
    EverCool Dual 5.25 in. Drive Bay to Triple 3.5 in. HDD Cooling Box (2 support 6 drives in the case)
    1 IBM M1015 (To support the extra drive and possible extra drives / enclosures in the future)
    6 3tb WD Red Drives
    Will the 280w power supply be enough to handle this? I will be running FreeNas on this server.

    Do some math with drives consumption and see if it is within specs of power supply. I would say it is OK, but as was said - not validated / intended config ...
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Power Supply for multiple Graphics Cards

    I recently purchased an X1900 G5 Mac card. I now have my original (NVIDIA GEForce 6600LE) plus this new one. If I purchase yet another X1900, how do I get power to it? There is only one power jack on the mother board.
    What are my options? Can my power supply support more caards? How do I connect them to the power supply? ATI pointed me to Apple support

    Slot 1 (bottom) is the only slot designed for a high powered card. It is also the only 16 lane PCI-Express slot. The other slots have a power limit of 25 watts. Slot 3 is 8 lane, 2 and 4 are only 4 lane.
    <http://developer.apple.com/documentation/Hardware/Conceptual/HWtechPCI/Articles/pci_implementation.html#//apple_ref/doc/uid/TP40003937-DontLinkElem entID64>
    Put the 1900 in slot 1 (bottom), and the 6600 in slot 3. Even if there was enough power for a second 1900, it would not have the bus bandwidth because there is only one 16x slot.

  • Hp pro 3125 supports 600 watts power supply

    Can HP Pro 3125 supports 600 watts power supply ?
    Can HP pro 3125 PCIe supports ddr5 graphic cards?
    This question was solved.
    View Solution.

    You would be better served by joining the HP Business Enterprise forum and posting the question there.
    The pc you are asking about is a business model.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Z400 Workstation Power Supply not Supported

    Good Day All,
    I would like to seek help on the issue that i am currently facing.
    Currently, I am using an HP Z400 Workstation and decided to switch to a bigger casing. I Bought a Full tower and casing and just realized that i am unable to move the power supply (425 Watts) as well due to the cables are too short to reach the CPU main Powers.
    So I bought a separate Power Supply (Cooler Master M2 Silent Pro 850 Watts).The cables are perfectly enough to reach the CPU main power source. After putting everything the pc won’t turn on……
    I thought my newly power supply was defective and got a replacement at the same day. I tried the new Power supply and simply does not want to turn on… this is getting frustrating as I am unable to figure out what is really causing the issue.
    I also tried to just plugging the cables at the Main power and removed all the additional devices just to test but still no luck….
    I started checking forums… there is only one post regarding about unable to change any other third party Power Supply for this HP Z400 Workstation. I guess it apply to all HP Branded as well as Dell.
    Guys I need your help as I don’t want to make a mistake again on considering to build another machine just because this one was not working… Maybe there is one there that manages to bypass or have a resolution on how I can successfully upgrade my Power supply using the same HP Motherboard.
    Here is my Current Specs..
    Processor
    Intel® Xeon® Quad-Core Processor W3565 (3.20 GHz, 8 MB cache, 1066 MHz memory)
    Chipset  Intel® X58 Express
    Here is the link for the full details of the specs
    http://www8.hp.com/sg/en/products/workstations/product-detail.html?oid=3718668
     Here is the power supply I want to replace http://h20464.www2.hp.com/results.htm?SID=3718668&MEID=368CA2BE-30F2-40AE-8929-DBF4AF2ADC21
    Will wait for your kind reply,
    Thanks

    The reason it won't turn on is because pins 21 and 23 are not in the standard ATX PSU configuration. Your motherboard works with an HP configured ground on pin 21 and +12 VDC instead of the ATX  (ATX12V v2.01)standard unused pin and +5VDC respectively. 
    Z400 PSU connector
    Standard ATX PSU connector
    I have not seen a non HP PSU available that would work without modification.  
    Not all HP's are built with propietary PSU connections most newer, non-business models use the standard ATX PSU configuration.  
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Thinkcentre M70z power supply needed in india maharashtra please help me out or support me

    Hello there if any one could help me out of this i will be so thankful to him or her anyway.
    i have lenovo thinkcentre m70z All-In-One desktop and its power supply burnt yesterday.
    i need one fresh brand new SMPS / Power suppy for it.
    from where i got that???
    Thanking you
    Contact  +919421472324

    ok, i've calmed down now and i think everythings sorted. all my files are still there and all applications, the ?'s just needed clicking on in the dock. i found it strange and wondered why my background changed. it's not a big deal, i just changed it straight back, but it made me think if that changed to default what other settings have changed to default? i've only had my mac a week or so, so i can't remember changing anything drastic, so this shouldn't really be a problem.
    thanks alot for all the help, i'll know where to come next time i have any trouble. i love knowing that mac's have a good community of people willing to help each other out.

  • I had an Intel-iMac fried by lightening. UPS, surge protectors but it happened as I was reaching to unplug.  Cold now.  Could it just be the power supply?  Can I replace that myself?

    This is the full question since I couldn't get it all in the box. 
    I have some complex questions regarding an iMac, a Time-Machine backup, and iTunes on an iPod.
    I live about halfway up an extinct volcano about 12 miles north of San Jose Costa Rica.  Some months ago, we had a thunderstorm and as I reached to unplug my computers lightening struck about 50 meters from my house.  I had an iMac with a 3-Tb external backup drive, a PC laptop and a laser printer on the same power strip.  There was a definite surge and the light brighten and then power was lost for a few minutes.
    When power was restored, the PC and the laser printer seemed to work fine but the iMac was cold.
    First questions:  Is is possible that the power supply was fried and not other essential parts?  Would it be worthwhile to replace the power supply?  Can I, with limited experience and tools do it or need I take it to a technician?  My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk.
    Next question:  Do I need to replace the hard-drive before taking it for service?  How hard is that, can I do it? I have seen videos of the drive replacement on-line.
    Those are my iMac questions, now the questions about backup restoration.
    If there is a saving grace with this it is that the Time-Machine backup seems fine although I have only accessed the data through Finder.  I replaced the iMac with a Macbook Air with significantly less mass storage and I can't just move files to the Macbook.  My problem is that I have an iTunes library of some 10,000 songs on the backup and until recently on a 160 Gb iPod which was old and it crashed.  I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that.  Can anyone tell me how I might do that or give me any insight into the process?
    Thanks for any help you can give.

    Is is possible that the power supply was fried and not other essential parts?  Would it be worthwhile to replace the power supply?  Can I, with limited experience and tools do it or need I take it to a technician?  My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk
    Quite possible, but working on iMacs is not easy, & PSU might be prohibitive.
    Hopefully the Drive might have info on it, but even pulling that out can be a chore.
    If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
    http://www.chipmunk.nl/klantenservice/applemodel.html
    http://www.appleserialnumberinfo.com/Desktop/index.php
    How to find the serial number of your Apple hardware product...
    http://support.apple.com/kb/HT1349
    I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that.  Can anyone tell me how I might do that or give me any insight into the process?
    I'd get an external drive & restore the whole works to it, then boot from the External drive.

  • Choosing the Right Power Supply

    First things first. If you've got a poor-quality and/or faulty power supply, nothing else you do will work to solve your problems. Stick to the basics before you go further...The short answer is to buy a hi-powered, brand name supply, like the new ENERMAX line (430 W or higher) or ANTEC True550. Almost nothing else will do with today's computers. In over 30 years of electronic/computer service, I have found that 85% or more of problems were power-related.
    If you want to know more, read on...
    Choosing The Right Power Supply
    If you’re reading this, there’s a good chance that one of my colleagues or I believe that you could be experiencing problems with your power supply, based upon the symptoms you mentioned in your post, and provided you with this link. Relax, you’re not alone. In 30 years of electronic and computer troubleshooting, I’d say that the majority of the electronic, mainframe, mini, and microcomputer problems I’ve diagnosed and repaired were with the basic power the problematic device was receiving. The symptoms often included random reboots, crashing, the BSOD, lockups, etc.
    (As the national support technician for few major computer service companies, working US Defense contracts, I was often the person that had to fly in and correct the problem, or “walk through” the on-site technician as he closely followed my instructions. I achieved success in my career by carefully reading the manuals, knowing where to go for more information that was otherwise unavailable to me, and/or systematically troubleshooting until the problems were discovered and repaired. I never had the option of giving up.)
    The most overlooked component when building or upgrading a PC is the power supply unit (PSU). Some people use their old case and PSU when they upgrade. Some use the PSU that came with their new case. Some people even buy a new PSU. And most inexperienced builders all make the same mistake: The PSU that they’re trying to use is simply inadequate for the job.
    Suppose you’re upgrading to a new motherboard, CPU, ram, and video card, but still using the old case and PSU. It’s most likely that you’re upgrading in order to build a machine that is more powerful, faster, has a more colorful display, can number-crunch more quickly, play the latest games, etc. These gains in performance all have one thing in common: They require more raw power. However, have you thought about where that power comes from?
    Suppose you’re building a new system with a new case and PSU. Has it occurred to you that the company that you bought the case/PSU from might make more money if they skimp on the supply, even if the supply has a large wattage rating? Most bulk power supply manufacturers don’t make good PSU’s. They use older, cheaper technology, and slap on labels that represent the PSU’s peak outputs, and not their continuous output rating. These companies are intentionally misleading you in order to sell you an inferior product. Brands I avoid when building/repairing my friends’ and family’s computers: Allied, Q-Tec, Chieftech, and many others.
    For those of you who bought a power supply separately, did you know that you’re only supposed to run a power supply continuously at 30-70% (with 50% being optimal) of its continuous rating for maximum efficiency (which means less heat to you)? Most inexperienced builders either buy PSU’s that are matched to their equipment’s continuous power usage, or ones that are even less powerful than they need. Why? Because they’re trying to save money.
    I mean, what’s the fun in a power supply? You don’t get any games with it, there’s no more storage, hardly ever any more bells and whistles, etc. A power supply is boring, and it’s supposed to be, because it’s supposed to provide a stable, reliable platform upon which the rest of the equipment can easily access the amount of power it needs, and when it’s needed. In almost EVERY review of powers supplies, the same point is stressed: Better safe than sorry.
    But what does safe vs sorry mean? It can mean that you don’t have to waste money on the wrong PSU in the first place, but it can also mean that you don’t have to replace your expensive ram, CPU, video card, etc. NEEDLESSLY, or because your cheap PSU destroyed them. What? A cheap power supply can wreck your computer? YES IT CAN. A cheap power supply can cause thermal damage, not only from the heat it produces, but also the heat it can create in your components as well. RAM is especially sensitive to heat, and there’s RAM in your CPU, your video cards, and, well, your RAM too. A cheap switching power supply, run at its maximum, or peak, continuously can also destroy components by creating RF (Radio Frequency) signals on your power rails, signals which the components on your peripheral devices were not equipped to handle in the first place.
    So this begs the question, how does one choose the right power supply? I’ll illustrate this using my own PC as the example. This is my setup that I use for video processing:
    K7N2G-ILSR
    Athlon 2500+ Barton @ 2125Mhz
    AMD Retail Heatsink/Fan
    2 - 512MB DDR333 w/Thermaltake Spreaders (slot 1&3)
    MSI TV@nywhere Video Capture
    ATI Radeon 9600
    120GB Maxtor DiamondMax Plus 9 SATA
    30GB Quantum IDE
    TEAC DV-W50E DVD/CD-R/W
    BTC DVD-ROM Drive
    Artec CD-R/W
    Using this Power Supply Calculator link:
    http://www.jscustompcs.com/power_supply/
    I plug in all my equipment values, but some of this can be a little tricky. For example, since I often run the CPU like an XP 3000, I choose the 3000 as my processor; it’s the same chip run at the faster rate. I also choose the ATI Radeon video card, and I select the RAM wattage for 2 sticks of DDR. I also choose every card I have, like my video capture card, but I also select the boxes for the separate cards that correspond to the functions that my ILSR provides as well (and that I use), like sound, USB, Firewire, NIC, etc.  Although I use the onboard SATA controller, I don’t select the SCSI PCI card, because, in truth, I’ve probably made up for it by selecting all the other corresponding devices, including cards that the motherboard replaces. I check the boxes for the fans and drives I use, and I’m done, right?
    Not yet.
    I just remembered that I plan to upgrade soon, so I go back and change the values to reflect my impending changes. I mean, I want to make sure that I have enough power to begin with so that I don’t have to replace the power supply again, right?
    Ok. Done. I look at the bottom and see that it tells me that I need a 468 watt PSU. So a 480 watt supply will do, right? Wrong.
    Remember that, for efficiency, long-life, and less heat, you want your actual power consumption to fall between 30-70% of the PSU’s rating, so add 30% (minimum) to the 468, and you get 468 + (468*.30)= 608 Watts! Holy Cow!
    However, I’d only need a 608-Watt supply if I was using all the devices at once, and I don’t. But, in truth, with video and audio processing, I often get close when I process, burn, and monitor at the same time. (Hardcore gamers also get close a lot, as they blast the sound and push that video to its limits.) So, let’s take off 10% (maximum) of 608, for a total of 541 Watts.
    I need a 550 Watt supply, but not just ANY 550 watt PSU. I need a supply that can give me enough power on the critical 3.3, 5, and 12V rails combined. I also want a supply from a trusted, name-brand manufacturer, so I start hitting the many online reviews. Here are just two from Tom’s Hardware:
    http://www6.tomshardware.com/howto/20030609/index.html
    http://www6.tomshardware.com/howto/20021021/index.html
    Read these in their entirety. I didn’t post them because they’re pretty links.
    In the end, I chose Antec, because they’ve got the reputation, the recommendation, and because the Antec True550 has better specs than the rest of the 550 Watt competition. I also bought it from a reputable company I found on Pricegrabber.com, for the lowest price I could find, $95.00 shipped to my door. (In truth, I wanted two mini-redundant supplies, like the hospitals and military use, but they were too expensive.)
    The result? Not only are the random reboots, crashing, the BSOD, lockups, etc., gone like magic, but I also now have “peace of mind” in that whatever might happen to my equipment in the future, I know almost for certain that the PSU is NOT the problem. I also bought an UPS, because the East Coast Blackout proved to me that even the Antec True550 isn’t going to provide me any power for emergency shutdown if it doesn’t get its power from somewhere.
    Even if your problem doesn’t lie in the PSU completely, it gives you a GREAT platform for troubleshooting further. If you’re not reasonably certain that the supply is the cause, borrow one, or buy one that you can return once you’ve solved the problem. But, above all else, BUY THE RIGHT SUPPLY before you do anything else! Otherwise, you could be plugging and unplugging components, buying and blowing up expensive memory, and causing even further damage, until you give up or die.
    I mean, I assume you built your own system to enjoy “more bang for your buck,” right? What’s the fun of a random reboot in the middle of Unreal Tournament 2003?
    William Hopkins
    Former Staff Sergeant, USAF
    B.A., B.S., with Honors
    The University of California, San Diego
    [email protected]
    P.S. It should be noted that while Enermax, ThermalTake, Zalman, Fortron, and others make great PSU’s, and I compared and considered them, the Antec still won out overall in my critical evaluation, like it did in so may others’ reviews. You’d probably be ok if you went with another reputable manufacturer as listed above, but pick a supply that gives you at least 230 watts on the 3.3 and 5V lines combined, and still meets the 30% criteria as stated above. Remember, if the manufacturers don’t give you maximum combined specs up front, they’re untrustworthy right off the bat. With power supplies, you definitely end up getting what you pay for. Don’t say nobody warned you.
    P.P.S. Update! After recent developments, it looks like Enermax is the leader, but only the latest line of PSU's.

    Ok, as an electrical engineer...I have to step in here! LOL
    First, these amp rating are for 2 +12 rails. That is why you see a protection of around 15-18A on the +12 rail. That means each Rail is allowed up to 18A lets say for the new Enermax 1.2 version like the one I have.
    Now, Lets say 18A for 12V....well as you know the Abit NF7-S uses the 12V for powering the CPU.
    Lets say you have a Barton like me and you want it stable at around 2.4-2.5Ghz. You will have to put lets say around 2V to the cpu to get it stable at that kinda speed, specially if you have high FSB like I do. So 12V * 18Amps = 216W ....well the converter on the NFS-7 is really bad, its loss on the step down convertion is probably around 25% along with the PSU lost cuz its not running at 25oC (another 15%)....you will actually only get around 100-120W for the CPU.
    Now, if you go into Sandra and see how much a Barton eats up at 2.4Ghz you will see its around 110Watts.
    So, if you wanna push more, dont even think about it! Prime Power test fails and your +12 rail will drop as low as 11.60 Volts.
    Now, lets say you got yourself a AMD 64 bit chip and you wanna overclock it....I bet it will need more than 110Watts.
    So, what im saying is, dont buy nothing less than a 500 Watt PSU!
    You really need around 20-22 A on the main +12 along with really really good cooling on the case and PSU so it is running at a 100%.
    http://forums.amdmb.com/showindex.php?s=&threadid=287828
    i found this quite interesting especially the bit re the power loss turning the 12v into 1.6v or what ever cpu needs

  • Do I need to replace video graphic card or power supply unit on hp compaq presario sr2180nx

    hello all
    i saw a similar post over 4 years ago, however it doesn't address my issue.
    my pc started stalling when i attempt to turn it on.  It wouldn't come on. Then after several tries every now and then it would come on. I was told through searching that it could be the video graphic card or the power supply. Therefore once i had the computer back on.  I never shut it off. However, i could reboot and it would come on.
    Now it won't come on again. So i don't know what to replace. The video graphic card or the power supply.  If it is the graphic card, do i replace the one previously installed or add a new one. And if adding a new one, what is recommended to be compatible with my 300 watt supply unit? I'm lost as what route to take and how.Below are the details of my unit.
    HP/Compaq Presario SR2180NX desktop PC with a P5LP-LE motherboard with an Integrated graphics using Intel GMA 950.
    *Integrated video is not available if a graphics card is installed.
    Also supports PCI Express x16 graphics cards
    300 watt supply.
    thank you in advance for any help you can give me.

    Is there an add-in video card in the slot? If so, remove it and try to turn on. If the problem is the video card it will turn on. If not it is the power supply.

  • Power supply fan dead - help? (400mhz AGP G4)

    Hello!
    Unfortunately, my PowerMac G4, a 400mhz, AGP Sawtooth model, has a dead fan.
    Over the last few weeks, I've noticed that my G4 has been running quite hot. I figured it was due to the hot dorm room that it's being used in. Then, I noticed that when it booted up, it would occasionally make a vibrating, or rattling noise - I figured the fan was wobbling. Since air was comming out of the fan opening at the top, I didn't worry about it.
    Today, I used the "Temperature Monitor" widget to check the temperature of my SMART Hard drive (the G4 itself is not sensed). It was 133 degrees!!! This is the bay on the back-right, just under the CPU fan. I looked at the fan again - not much airflow. I pulled out a flashlight and pointed it in, and the Fan that's inside the power supply unit is dead.
    So, how can I fix it? It's far far too hot, so it's not usable until I can cool it off. The first idea I had was to take a particularly powerful desk fan, and make a paper "tube" that connects both to the G4 and back of the fan - so it'll pull the hot air out. Needless to say, this is not a good log-term plan as it's easy to fall apart and will have leaks, but it works for now. I realize you can buy power supplies, but for ~$100, it's far too much for the old G4.
    Second idea: The fan is inside the "non-user servicable" power supply, but it's also next to the back of the G4 - right inside what appears to be a panel that holds the power supply in. At the very least, I'd like to make sure that the cable is attached and not loose, but I have to open the back. Is that possible or safe? If so, can I replace the fan?
    My third idea was to attach an extra fan to the inside of the G4, on the outside of the power supply - pushing in. Unfortunately, the IDE cable from the DVD drive is in the way, and there's not much room for a fan. Plus, there's no fan power supply. Is it possible to convert an ATA power plug (there are 7!) to a fan-power supply? I'd require a small circuit and a lot of resistors, obviously! If so, what would I need to do to convert it?
    Thanks a bunch,
    -Dan
    15" 1.67 Powerbook G4 (Jan 2005), 400 mhz AGP Sawtooth G4   Mac OS X (10.4.8)   4G Clickwheel and 5G Vid iPods, 2G iPod shuffle

    Thanks!
    Interesting, this "Piggy back power adapter" will allow me to plug the fan into one of the ATA/IDE cables? Or do you mean the extra port on the power supply? (it has one plug for the outlet>G4, then another to support something like a monitor or similar) The G4 has a DVD burner, but no ZIP drive, so this is quite do-able if it uses the ATA power.
    When you say "lower rear", do you mean at the bottom? Below the power supply, to the right of the PCI slots? If so, this is the inflow for the CPU fan! I can understand mounting it outside the current outflow-vent for the dead power supply fan, although I'm not sure the best way to proceed with attaching the fan.
    Another question: what tools and supplies will I need? I may need to remove the plastic cover on the back of the G4 - the one that is outside the power supply - as there's a gap between the gray plastic and metal chassis that lets air from outside the machine come in. The screws for this cover use a funky, hexagonal screwdriver. If I need to take this cover off, what kind of screwdriver will I need? Also, should the fan not include screws/etc, what's the best method to attach it? Glue?
    Secondly, to cut a hole in the G4, will I need some variety of drill? I don't have one, so i'll have to borrow one... Since there's nothing in the ZIP slot, I can run a cable out through here (assuming it's long enough), and make a new bezel to keep the airflow inside intact.
    Ah! One other (somewhat related) question: my USB 2 card includes a power adapter, for use when several un-powered devices (flash drives) are attached. It works just fine with a flash drive and a small media reader, but it's slow to sense the drives - I think it's low on power. Unfortunately, this power plug uses the same variety of plug as the floppy disk drives found on many win-boxes - of which the G4 possesses none. Is there an adapter/cable for this purpose?
    Thanks, this is a HUGE help, I appreciate it.
    -Dan

  • IMac G5 bluetooth + airport + power supply problems - oh and the dvd drive

    Yeah, seems like a lot is going wrong with my mac lately. I bought the iMac G5(no isight) model last year around july. I had some power issues (i.e. leaving the house with it turned on to come home and find it off) For the last year though that was all that was wrong. Once I had to reinstall OS X because it would not find the OS X harddrive during one of these power losses, but that was it.
    Then about two weeks ago, I came home to a turned off iMac. I thought the power had gone out in my apartment, but the clocks were all right, and to my surprise the iMac would not turned on. Because I am not under warranty I searched online and found an extended exchange program for my emc model. (http://www.apple.com/support/imac/powersupply/repairextension/) I made an appt at the apple store and they replaced the power supply.
    I got the machine back two nights ago and my bluetooth hardware wasn't recognized. And I now had a new "ink" system preference panel in the hardware section which aparently is some sort of handwriting recognition tablet. It ticked me off, but I just wanted to use my computer.
    Well today I came home from work and my computer was acting funny. Everywhere I clicked brought up dashboard. This had never happened before and I had no choice but to force a shutdown. Powered it back up and poof, there goes my airport card. No hardware recognized. Now I have a 25 ft cable running the floor of my apartment. This was cause enough to call apple. I was told to make another apointment to bring the computer in. The guy made it sound like it was no big deal to lug a 30 lb bulky computer 40 miles and through a crowded mall. He also made no promises that the repairs would be covered under the exchange program.
    I just wanted to hear any suggestions before I decide whether or not its worth it to bring in the computer. Nothing shows up in system profiler under bluetooth or airport. Should I just lie to the "genius" and tell them that my computer still shuts down randomly? I think that way they would at least replace the logic board (which I think is the problem) before telling me to sell my kidney and pay for repairs. I've tried reseting the SMU, and I looked at the bluetooth and airport cards to see if they had been accidently disconnected during the PS replacement. They are actually screwed into the logic board so I think their connections are efficient.
    Oh and about the DVD drive. I have to use two cd's in order to burn a single disc. The first disc I put in the drive NEVER works. It spins for about 30 seconds then starts buzzing like blender and spits the cd back out. The second blank disc I put in USUALLY works, but sometimes it takes three discs. This problem has always been there since day 1, but I don't burn enough cd's for it to be an issue.
    Thank you for listening to my gripes. I really don't think I'll make the mistake of buying the first issue of a model.
    iBook G4 900mghz, iMac G5 20" 2.0 ghz   Mac OS X (10.4.8)  

    OK, first thing -to restore your bluetooth, shut down, unplug for a few minutes and then reboot. Thay usually brings the BT back. You should also repair permissions. Reset your SMU nd your PRAM as well.
    Try those four things and please post back,
    Miriam

  • TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)

    this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
    Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
    and extracting .. found Error1 at the point Verify firmware . AGAIN AND
    and this is the log ..
    2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
    [13:47:25.0555] Changing state from 'Idle' to 'Restoring'
    [13:47:25.0555] device software does not support nonce generation
    [13:47:25.0555] requested restore behavior: Erase
    [13:47:25.0570] requested variant: Erase
    [13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:27.0333] <DFU Device 0562C260>: production fused device
    [13:47:27.0333] requested restore behavior: Erase
    [13:47:27.0333] device software does not support nonce generation
    [13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
    [13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
    [13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
    [13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
    [13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
    [13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
    [13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
    [13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
    [13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
    [13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
    [13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
    [13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
    [13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
    [13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
    [13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
    [13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
    [13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
    [13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
    [13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
    [13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
    [13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
    [13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
    [13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
    [13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
    [13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
    [13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
    [13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
    [13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
    [13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
    [13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
    [13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
    [13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
    [13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
    [13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
    [13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
    [13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
    [13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
    [13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
    [13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
    [13:47:27.0942] WinDFU::UploadData: ZLP
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:30.0968] WinDFU::ResetDevice: resetting...
    [13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
    [13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
    [13:47:31.0046] Finished DFU Restore Phase: Successful
    [13:47:31.0218] DFU mode device disconnected
    [13:47:31.0218] Device removed when in state Restoring, moving device to transition state
    [13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
    [13:47:31.0218] Creating timer to monitor transition
    [13:47:32.0175] DFU mode device connected
    [13:47:32.0175] Transitioning device returned, continuing restore.
    [13:47:32.0175] Canceling timer
    [13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
    [13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:32.0175] requested restore behavior: Erase
    [13:47:32.0175] requested variant: Erase
    [13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
    [13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
    [13:47:33.0532] requested restore behavior: Erase
    [13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
    [13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
    [13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
    [13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
    [13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
    [13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
    [13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
    [13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
    [13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
    [13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
    [13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
    [13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
    [13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
    [13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
    [13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
    [13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
    [13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
    [13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
    [13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
    [13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
    [13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
    [13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
    [13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
    [13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
    [13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
    [13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
    [13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
    [13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
    [13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
    [13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
    [13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
    [13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
    [13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
    [13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
    [13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
    [13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
    [13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
    [13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
    [13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
    [13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
    [13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
    [13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
    [13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
    [13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
    [13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
    [13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
    [13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
    [13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
    [13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
    [13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
    [13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
    [13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
    [13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
    [13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
    [13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
    [13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
    [13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
    [13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
    [13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
    [13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
    [13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
    [13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
    [13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
    [13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
    [13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
    [13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
    [13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
    [13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
    [13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
    [13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
    [13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
    [13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
    [13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
    [13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
    [13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
    [13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
    [13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
    [13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
    [13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
    [13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
    [13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
    [13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
    [13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
    [13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
    [13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
    [13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
    [13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
    [13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
    [13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
    [13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
    [13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
    [13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
    [13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
    [13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
    [13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
    [13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
    [13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
    [13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
    [13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
    [13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
    [13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
    [13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
    [13:47:35.0732] WinDFU::UploadData: ZLP
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:38.0758] WinDFU::ResetDevice: resetting...
    [13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
    [13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
    [13:47:38.0836] Finished DFU Restore Phase: Successful
    [13:47:39.0039] DFU mode device disconnected
    [13:47:39.0039] Device removed when in state Restoring, moving device to transition state
    [13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
    [13:47:39.0039] Creating timer to monitor transition
    [13:47:41.0674] Recovery mode device connected
    [13:47:41.0674] Transitioning device returned, continuing restore.
    [13:47:41.0674] Canceling timer
    [13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
    [13:47:41.0684] requested restore behavior: Erase
    [13:47:41.0684] requested variant: Erase
    [13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:42.0528] iBoot build-version = iBoot-1940.10.58
    [13:47:42.0528] iBoot build-style = RELEASE
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:42.0543] AMDeviceIoControl: pipe stall
    [13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
    [13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
    [13:47:42.0543] radio-error not set
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] interface has 1 endpoints, file pipe = 1
    [13:47:42.0543]
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
    [13:47:42.0606] unable to open device_map.txt: No such file or directory
    [13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
    [13:47:43.0994] unable to open device_map.txt: No such file or directory
    [13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:43.0994] AMDeviceIoControl: pipe stall
    [13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
    [13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
    [13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
    [13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
    [13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
    [13:47:46.0958] unable to open device_map.txt: No such file or directory
    [13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
    [13:47:46.0958] Finished Recovery Restore Phase: Successful
    [13:47:48.0409] Recovery mode device disconnected
    [13:47:48.0409] Device removed when in state Restoring, moving device to transition state
    [13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
    [13:47:48.0409] Creating timer to monitor transition
    [13:47:52.0895] RestoreOS mode device connected
    [13:47:52.0895] Transitioning device returned, continuing restore.
    [13:47:52.0905] Canceling timer
    [13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
    [13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
    [13:47:52.0905] requested restore behavior: Erase
    [13:47:52.0905] requested variant: Erase
    [13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:53.0792] requested restore behavior: Erase
    [13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0792] device did not return saved USB log
    [13:47:53.0792] device did not return saved panic log
    [13:47:53.0792] previous restore failed with exit status 0x100
    [13:47:53.0792] connected to service com.apple.mobile.restored
    [13:47:53.0808] using protocol version 13
    [13:47:53.0808] unable to open device_map.txt: No such file or directory
    [13:47:53.0808] board config = n42ap
    [13:47:53.0808] no value returned for BootArgs
    [13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
    [13:47:53.0824] no value returned for MarketingPartNumber
    [13:47:53.0824] _copyDeviceProperty() failed for mpn
    [13:47:53.0824] requested restore behavior: Erase
    [13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
    [13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
    [13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
    [13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
    [13:48:10.0360] L2TP domain init
    [13:48:10.0360] L2TP domain init complete
    [13:48:10.0360] PPTP domain init
    [13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
    [13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
    [13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
    [13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [13:48:10.0360] [NAND] WMR_Start:174 FIL_Init  [OK]
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
    [13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
    [13:48:10.0360] [NAND] WMR_Open:371 VFL_Open    [OK]
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] AppleMultitouchN1SPI: successfully started
    [13:48:10.0360] AppleH4CamIn::start - back camera expected
    [13:48:10.0360] AppleH4CamIn::start - front camera expected
    [13:48:10.0360] AppleH4CamIn::power_off_hardware
    [13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
    [13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
    [13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
    [13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
    [13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] display-scale = 2
    [13:48:10.0360] display-rotation = 0
    [13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
    [13:48:10.0360] found display: primary
    [13:48:10.0360] display: 640 x 1136
    [13:48:10.0360] found PTP interface
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioControl
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
    [13:48:10.0360] IOAccessoryPortUSB::start
    [13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
    [13:48:10.0360] init_waste
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
    [13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
    [13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
    [13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
    [13:48:10.0360] [NAND] WMR_Open:420 FTL_Open    [OK]
    [13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
    [13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
    [13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
    [13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
    [13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
    [13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated():  Received power state change before driver has initialized, ignoring
    [13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
    [13:48:10.0360] Started logging for intf
    [13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
    [13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
    [13:48:10.0360] start:156
    [13:48:10.0360] start:156
    [13:48:10.0360] AppleARMBacklight::start: No AAP function
    [13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
    [13:48:10.0360] recv(13, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
    [13:48:10.0360] recv(14, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
    [13:48:10.0360] unrecognized key 'BootArgs' in value query
    [13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
    [13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
    [13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] client protocol version 13
    [13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
    [13:48:10.0360] Restore options:
    [13:48:10.0360]  UUID                           => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
    [13:48:10.0360]  MinimumSystemPartition         => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionSize            => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionPadding         => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
    [13:48:10.0360] entries =>
    [13:48:10.0360]  2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
    [13:48:10.0360]  3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
    [13:48:10.0360]  4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
    [13:48:10.0360]  5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
    [13:48:10.0360]  8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
    [13:48:10.0360] }
    [13:48:10.0360]
    [13:48:10.0360] entering load_sep_os
    [13:48:10.0360] device has no sep
    [13:48:10.0360] entering partition_nand_device
    [13:48:10.0360] device supports boot-from-NAND
    [13:48:10.0360] nand device is already partitioned
    [13:48:10.0360] entering wait_for_storage_device
    [13:48:10.0360] Searching for NAND service
    [13:48:10.0360] Found NAND service: IOFlashStoragePartition
    [13:48:10.0360] NAND initialized. Waiting for devnode.
    [13:48:10.0360] entering clear_remap_variable
    [13:48:10.0360] executing /usr/sbin/nvram
    [13:48:10.0360] entering format_effaceable_storage
    [13:48:10.0360] effaceable storage is formatted, clearing it
    [13:48:10.0360] effaceable storaged cleared
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Sochi11D257.N42OS
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] entering check_for_restore_log
    [13:48:10.0360] found restore log (size = 28347)
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] error unmounting '/mnt2': Invalid argument
    [13:48:10.0360] entering clean_NAND
    [13:48:10.0360] NAND format complete
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
    [13:48:10.0360] entering format_storage_for_LwVM
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] unexpected partition 'LwVM' - skipping
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
    [13:48:10.0360] entering create_filesystem_partitions
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] system partition padding size is: 167772160 bytes
    [13:48:10.0360] unable to open : No such file or directory
    [13:48:10.0360] creating 2 partitions
    [13:48:10.0360] creating encrypted data partition
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] block size for /dev/disk0s1s2: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering mount_filesystems
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s2
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Data
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Data appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
    [13:48:10.0360] entering resize_system_partition_to_options
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
    [13:48:10.0360] Erasing system partition prior to resize operation.
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:0 requiredSize=465920
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized the system partition
    [13:48:10.0360] entering maximize_data_partition
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
    [13:48:10.0360] maximizing data partition to 13946060799 bytes
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=3404800
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized data partition to consume free blocks
    [13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] entering ramrod_ticket_update
    [13:48:10.0360] looking up root ticket hash
    [13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
    [13:48:10.0360] received valid ticket (2741 bytes)
    [13:48:10.0360] entering restore_images
    [13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
    [13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
    [13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [13:48:10.0360] void AppleUSBDeviceM

    Hello gamavranje,
    Thanks for using Apple Support Communities.
    The icons you're seeing on your iPhone indicate it is in recovery mode.  Please plug your iPhone into your computer, and restore it with iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • 1st gen. iMac G5 power supply failure

    Hi, all!
    My 20" iMac G5 here at work collapsed and died on me about a week ago. The computer just deactivated abruptly; I actually had thought that I had kicked the plug or stepped on the power bar by mistake. I restarted it, and it worked for twenty minutes before dying again. Now it's entirely unresponsive. Having read up on the matter here and in the Mac support pages, I'm quite sure the power supply has failed. I'm in the process of finding out whether the computer is still covered under Apple's Repair Extension Program. (http://www.apple.com/support/imac/repairextensionprogram/ - I know the iMac model is correct, my serial number matches the range, I'm just not sure if the computer is less than three years old.)
    Anyway, the important thing for me is the hard drive, not the machine itself. We're entirely Mac-based here at work, so there is no shortage of machines for me to work on (I've already replaced my old machine with a much newer Intel-based iMac), but I would very much like to retrieve my data from my old hard disk. I've downloaded the DIY guide for opening the 20" iMac G5 and removing the hard drive, but I need some advice on the best plan of action. Should I then open another, working G5, remove its hard drive, insert my old hard drive and transfer my files off to my new iMac through our company server? Or is there another way to approach it? Is the hard drive on my 20" first gen G5 compatible with newer mac models, or am I going to run into problems with connectors, physical disk size, etc.? Or, should I just leave well enough alone and leave the entire operation to a Mac Genius?
    This will be my first time opening an iMac. I believe that I can open the machines and remove-replace the hard drives without voiding any warranties, correct?
    Thanks so much in advance for your help and advice!
    Adam

    I am on the phone right now with a product specialist about my iMac G5 power supply issues. Kind of ***** because he has, in so many words, said that the Genius is the Alpha and Omega and can extend the 3 year coverage. For me that is great except that the Apple store is over an hour away. I don't understand why the dude on the phone can't pull the switch and make it happen as well.
    Factor in:
    Unplugging iMac G5 and all peripherals
    Loading it in the car
    Driving an hour
    Carrying it into the Mall (apple store)
    Waiting for my Genius appointment
    More than likely getting it fixed for free (from the sounds of things)
    Driving back after it is fixed
    Doing everything listed in reverse.
    Would it just be easier to pay the $108 for a new power supply, wait a few days, undo some screws, and BAM! it works again?
    Update. Off the phone now. The product specialist flexed his muscles, back handed the Genius to gain authority, and basically stated that they WILL DEFINITELY repair either the power supply or the logic board or both if needed. I have already had them replace the logic board once. BUT, I still have to load it up and take it to the Apple Store. Boo.

  • Help I think my power supply is going bad! Where can I buy parts?

    I am getting random reboots and it doesn't seem to be the OS... My first guess is the power supply but I can't seem to find one to buy... Does anyone know where I can buy one at?  Is there a good place for parts for the MEGA 180?
    Thanks
    Mobile Bob

    Quote from: Stu on 02-August-07, 06:19:52
    you need to post more information about the problem you're having, before we start pointing the finger at the PSU, which is the one part that is difficult to obtain now
    >> Getting help with random restarts and blue-screens <<
    Post more info on the hardware in your Mega PC, refer to >> Moan Guide <<
    Download Speedfan and use it to measure CPU temps both at idle and under load and post them here. >> How to use Speedfan <<
    Test your memory using >> Memtest86 <<
    The thing is that windows never leaves an error... I get nothing in the event viewer except windows was shutdown error no other errors are listed so I don't think it's windows... I ran a CPU Burn in test for over 24 hours and never had a problem so I don't think it's heat either... And the reboots are quite random I will go two weeks without one and then get them two and three times a day...  To me the power supply seems to be the easiest answer but since there hard to get I guess it's not so easy to check eh...
    I have done the fan mod (Turning it so it sucks in cool air) and I have a slot fan dumping tons of air out the back so I don't think it's a heat problem... I started to have the problem running Windows XP SP2 so I did a complete reload from scratch to Windows Vista (I know not completely supported but it works fine) and am still having the same problem...  I have a Haugpauge 150 pci card, Haugpauge USB2, A usbuirt pluged into usb and thats about it...  2 gigs of ram 2x1gig sticks from Crucial,  yes I have already run a memory check and it passed...
    Is there not anywhere to get a power supply?  Or is there another model that fits the mega 180 case?

  • Upgrade video card and power supply or upgrade my pc?

    I have a :
    HP
    Series Pavilion Model M8530F(KT334AA) Type Media Center / HTPC Processor AMD Phenom X4 9550(2.2GHz) Processor Main Features 64 bit Quad-Core Processor Cache Per Processor 4 x 512KB L2 Cache Memory 5GB DDR2 800 Hard Drive 750GB 7200RPM SATA Optical Drive 1 SuperMulti DVD Burner with LightScribe Technology Graphics NVIDIA GeForce 9300GE with Hybrid SLI Technology with 256MB dedicated video memory, DVI and HDMI capabilities, and support for Microsoft DirectX 10. Up to 1919MB Total Available Graphics Memory as allocated by Windows Vista Audio High Definition audio Ethernet Integrated 10/100/1000Mbps network interface Keyboard HP multimedia keyboard Mouse HP optical mouse Operating System Windows Vista Home Premium 64-bit Software Included Photo and Video
    muvee autoProducer Basic: Automatically create professional looking home videos and burn to DVD
    Entertainment
    Cyberlink DVD Suite Deluxe: Automatically fix and edit videos and create CDs and DVDs. Edit, burn and archive data to discs.
    Productivity
    Microsoft Works 9: Includes a word processor, spreadsheet, database and calendar
    Microsoft Office Home and Student Edition 2007 Trial: 60-day trial version
    Adobe Reader 8: Read and print PDF file
    PC Security
    Norton Internet Security 2008: Protect your PC out of the box (60 days of complimentary live updates)
    Online Services
    Easy sign-up to major dial-up and broadband Internet Service Providers:
    - MSN dial-up (offer included)
    - NetZero Dial-Up (offer included)
    - NetZero Accelerated Dial-Up (offer included)
    - Juno Turbo Dial-Up (offer included)
    - High Speed Internet Services Comparison Shopping
    Motherboard Chipset NVIDIA GeForce 8200 Chipset
    CPU CPU Type Phenom X4 Installed Qty 1 CPU Speed 9550(2.2GHz) L2 Cache Per CPU 4 x 512KB CPU Socket Type AM2+ CPU Main Features 64 bit Quad-Core Processor
    Graphics GPU/VPU Type NVIDIA GeForce 9300 GE Graphics Interface PCI Express x16
    Memory Memory Capacity 5GB DDR2 Memory Speed DDR2 800 Form Factor DIMM 240-pin Memory Spec 2GB x 1 & 1GB x 3 Memory Slots (Available/Total) 0/4 Maximum Memory Supported 8GB
    Hard Drive HDD Capacity 750GB HDD Interface SATA HDD RPM 7200rpm
    Optical Drive Optical Drive Type DVD Super Multi Optical Drive Spec SuperMulti DVD Burner with LightScribe Technology
    16x DVD±R, 8x DVD+RW, 6x DVD-RW, 8x DVD+R DL, 4x DVD-R DL, 5x DVD-RAM, 16x DVD-ROM, 40x CDR, 32x CDRW, 40x CD-ROM
    Audio Audio Chipset Integrated
    Communications Modem 56K LAN Chipset Integrated LAN Speed 10/100/1000Mbps
    Front Panel Ports Front USB 2 Front IEEE 1394 1 Front Audio Ports 2 Card Reader Front panel 15-in-1 memory card reader: supports SmartMedia, xD, MultiMedia Card, Secure Digital (SD), Mini Secure Digital, Compact Flash I, Compact Flash II, IBM Microdrive, Memory Stick, Memory Stick Pro, Memory Stick Duo, Memory Stick Pro Duo, RSMMC, MMC Mobile, MMC+
    Back Panel Ports PS/2 2 Video Ports 1 DVI, 1 HDMI Rear USB 4 Rear IEEE 1394 1 RJ45 1 port Rear Audio Ports 6 ports S/P DIF 1 port
    Expansion PCI Slots (Available/Total) (2/3) PCI-E x1 slots
    (0/1) PCI-E x16 slot
    Mouse Mouse Type HP optical mouse
    Keyboard Keyboard Type HP multimedia keyboard
    Physical Spec Dimensions 16.54" x 15.16" x 7.60" Weight 32.00 lbs.
    Manufacturer Warranty Parts 1 year limited Labor 1 year limited
    Sorry for the long copy and paste. I read that I can upgrade the video card and power supply. But atm when I play world of warcraft at ultra settings, I tend to lag really bad in the new instances with the new cat expansion that came out. I wanted to know if I should upgrade the video card and power supply for better performance or just upgrade my whole pc tower.  Fyi, I am running a Acer X243w lcd flat panel monitor if that helps too.

    My brother has a high end laptop with a built in, high end gaming video card (I forget which one). He's able to run the game on full-on Ultra. 
    I have an integrated video card which games the game on.. 'cartoon'.. mode. It's lower then low. When someone shoots a powerful spell at me, I go into a DOS Prompt. (not really, but it's pretty bad).
    Funny thing is, I can still kick my brother's butt in any PVP match he wants to set up. 
    But I guess his graphics are pretty....
    As for which video card works best, I'd have to do some research. After that graphics update they did with CAT,  it's kind of a toss up again.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

Maybe you are looking for

  • Itunes 10.0.1 crashes when I plug in my 1st Gen Ipod Touch

    Hi All, would appreciate some advice on this issue. Last night I updated my itunes to v. 10.0.1 on my macbook pro running 10.6.4. 10 mins later I plugged in my iPod 1st Gen to sync some content over but itunes got stuck at the verifying stage and the

  • InDesign CS3 Text Variables

    I was wondering if anybody could help me. Is there a way to export to a PDF from InDesign, and the text variables still function as they would in InDesign? Any help would be greatly appreciated! thanks

  • BIPublisher Release 11g (11.1.1)

    Hi, I am using Oracle BIPublisher Release 11g (11.1.1), I want to know if there is a way that I can read Data Model (Data Set) files with extension *.xdmz  and *.xdoz As when I open the file in Notepadd++, it gives some junk data. Earlier in Oracle B

  • Uninstalling Applications from Mac

    Hi Is there anyway to uninstall the applications as normally we do in Windows? I cannot see a place where the installed applications are shown and option to remove it completely. Can anyone please guide me in this area as I am in my 4th day after ent

  • Cummulated kpi which is created in BEX dssigner is not showing in WEBI Side

    I am facing below issue i have create one  kpi working capital commutative in Bex designer  which is cumulation  .its working fine means result is coming cummulated in bi side. but in WEBI side above kpi is NOT Showing . Already I Have  allow externa