Power supply with geforce 5950 ultra 256

my computer when im playing sometimes tells me that the video card its not recivin enough power and its going to lower the performance of the video card, i need some help with this i have a power supply of 400 watts
processor pentium 4 2.8
motherboard intel 875 pbz
1 gig of memory ram
hard drive of 20 gigs
3 extra coolers
sound blaster live sound card
msi geforce 5950 ultra 256

thanks for the help guru and to all of you one last quiestion do you think this power s´pply would be enough?
http://www.newegg.com/app/viewProductDesc.asp?description=17-103-910&depa=0
Antec 550W Power Supply, Model "TRUE550" -RETAIL
Model# TRUE550
Item # N82E16817103910
Specifications:
Type: ATX
Maximum Power: 550W
PFC: No
Power Good Signal: 100-500ms
Hold-up Time: >= 17ms at Full Load
Efficiency: >= 68%
Over Voltage Protection: +5V trip pointOverload Protection: Latching Protection+5V @Input Voltage: 115/230 VAC
Input Frequency Range: 47-63 Hz
Input Current: 10.0A for 115VAC; 6.0A for 230VAC
Output: +3.3V@32A; +5V@40A; [email protected]; +12V@24A; -12V@1A; +5VSB@2A
MTBF: 80,000 hrs. @ 25ºC
Approvals: UL, TUV, CB, VDE, FCC CLASS B, DEMKO, NEMKO, SEMKO, F

Similar Messages

Problems with fx 5950 ultra 256

i have an intel pentium 4 875 motherboard with a 2.8 gig procesor with 2 memories of 512 ddr 400 and a 500 wts energy suply with a geforce fx 5950 ultra, my problem is the next.
when im playing games as command & conquer generals the computer turns off automaticly ill go to the option menu its not the first time its happenning since i bought this new pc i dont know what to do i need help it only happens when im playing

darhpibe
Check out these places they might ship to Peru!
http://www.newegg.com http://www.zipzoomfly.com http://www.Directron.com
http://www.tigerdirect.com
Remember if you buy a PSU get a quality named PSU, like a Antec,
Enermax, Fortron, or the best, PC Power & Cooling for your primary PSU!
You can use more than one PSU, but the primary PSU that’s used by the MB
needs to have the correct amount of wattage for the MB and the Hard Drives.
The second PSU can power the 12v fans, optical drives, floppy drives, Peltiers,
water pumps, cathode lights, 3.3v-5v &12v LEDs, fan controllers, temp sensor controllers, etc, etc, etc.
A word of caution though, unless you under stand how circuits and currents
are used in your rig, I would advise you not to do this, because you can possibly
smoke your rig and burn down your house!
Here is a thread on hooking up and using two PSU!
[http://www.ocforums.com/showindex.php?threadid=88976]
The H2O Guru
If You Build The Circuit, The Electrons Will Come!
Enermax 550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Chipset Drivers v3.13
nVidia VGA Drivers v56.64

Which power supply for GeForce 6800 Ultra ?

As there are special requirements for the power supply and "550W" is often a marketing gag my questions is:
Which particular (and silent) power supply is recommended for GeForce 6800 Ultra cards ?

All those power supplies i suggested will power the 6800ultra with no problems. Tagan 480, OCZ 480 are very quiet. Enermax 465 is moderately quiet. I suggest you do some reading in the forums first or you might get yourself confused. Also note that the 6800ultra is a very very noisy card.

Power supply for MSI 645 Ultra mother board

I need to replace the power supply for a MSI 645 Ultra mother board. I've available a switching power supply Allied model DR-B500E, that doesn't have the -5V output (infact its 20 pin ATX power supply connector has no wire in pin 18).
Can I use this power supply with the MSI 645 Ultra?
Thanks in advance for any help.

Hi, here I am. Sorry for delay but I had some problems with the PC (as NTLDR missing).
However now is ok and I can confirm that it runs ok also with power supply without -5V output.
Thanks a lot for the support and best wishes for Christmas and new year.

Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
If you have trouble, emai
l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
Good luck

Can I use the old power supply with the new unit?

I have a second generation Apple TV. When I install the new unit next week can I use the old power supply with the new one and the new power supply with the old one? This would save some messing with cords behind the units.

Hello:
I would definitely not try that..... The power supplies may be compatible - or may not be compatible. I think messing with cables is a small price to pay for not potentially frying a new device.
Barry

K7N2G + Geforce 5950 Ultra = not compatible?

I bought a Geforce 5950 Ultra Card (Leadtek 380 Ultra TDH), installed it and it didn´t work (Monitor stays at standby)...
Can anyone tell me if the mainboard is compatible or is there anywhere a listing of compatible / not compatible graphic cards for MSI-Mainboards?
My Config:
K7N2G mainboard (BIOS 3.90)
AMD athlon Xp2700+
2 X 256Mb DDR
550W PSU
Windows XP

I tried it ... just one stick
and it works!!!
But WHY is it working?
And how can I use both memory sticks (just 256MB isn´t funny!)
and why thinks my computer now that I have a Athlon 1500+ instead of a Athlon 2700+

IPad power supply with iPhone

Hi,
is there any document where Apple is saying that we can use the 10W iPad power supply with the iPhone?
Tnxs.

You bet. See below.
http://store.apple.com/ca/product/MC359LL/A?fnode=3c

CAMTEC power supply with USB interface

Has anyone already controlled a CAMTEC power supply with an USB2.0 UI.Drive-Interface by LabVIEW ?
Many thanks in advance for any advice.
Solved!
Go to Solution.

JB wrote:
Has anyone already controlled a CAMTEC power supply with an USB2.0 UI.Drive-Interface by LabVIEW ?
Many thanks in advance for any advice.
Looks like you'll need to call a .NET DLL unless they wrote some wrapper LabVIEW VIs .

Looking for software driver for HP 6655A Power Supply with Labview 5.1

Hi, trying to control an HP 6655a Power Supply but the version of Labview in the PC is the old Labview 5.1.
I don't want to upgrade it for fear that the program will no longer function. Does anyone have the driver for the HP6655a that will work with labview 5.1?

Hi demo,
Try the drivers directly from Agilent.
Here is a couple of links:
http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536913992&NAV_ID=-536891584.536882066.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
Click on> Driver: 665xA Series Instrument Drivers
Maybe this one is better... it's older...
http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536917365&NAV_ID=-536891585.536880265.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
Click On > Driver: DC Power Supply Instrument Driver (1.13 MB)
You may have to import the instrument driver after you install the libraries. This is done by selecting from the pull down menu:
Tools > Instrumentation > Import CVI Instrument Driver
JLV

Can I use the iPod Nano cable and AC power supply with the iPhone?

Just purchased my iPhone 3G. Phone was in my pocket and the AT&T clerk neglected to put the box with the computer cable in the bag with the other accessories.
Until I can pick it up, can I use my iPod Nano cable? The plug seems the same size but I don't want to break anything.
Also, there was no power supply in the box due to the recall. Can I use the iPod AC power supply I bought for the iPod? It is the white brick about 3" by 3" by 1" with a USB socket in the side.
Thank you for helping me with my start-up glitches.

Ps. When you do get the accessories, look for a green dot (on the side where the prongs of the plug come out). If there, fine; if not, your adapter is subject to the recently announced recall of ultracompact USB adapters.

HT4623 I selected the latest update to OS 7 and it seems to have stuck. I have an image of the power supply with an arrow pointing to iTunes on my screen. I do not know how to move from that point. Never have seen it before. Anyone help?

I am trying to upgrade to lastest release. It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen. I have never seen this and want to reboot or restart or something. Anyone help?

I have this very same problem, have you gotten any thing to help? I hit update on the iPad and then it froze...rebooted and got the screen you described.
"I am trying to upgrade to lastest release. It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen. I have never seen this and want to reboot or restart or something. Anyone help?"
Message was edited by: rfdeaton

Help Using Labview to control Kikusui power supply with a PIA4850 controller

HI I need some help using Labview to control 4 Kikusui power supplies. We have a PIA4850 Kikusui power supply controller. I can use the visa test panel and see the PIA4850 but can see any of the power supplies. I have very limited use of Labview and only wrote a couple programs using GPIB. The PIA4850 is a USB controller and can control up to 32 PS. I can get it to work with a Excel demo software that came with the controllers so I know that it is working. Any help will be appreciated. I am using LabView 8.2 and have updated to the Ni-DAQ 9.0. I have a program that I need to incorporate the PIA4850 into once I figure out how to operate it. Thanks in advance.

HI and thanks for the help. I did get one power supply to work but have another problem. I need to control 4 power supplies at the same time and can only operate the one that is addressed N5!C1. If I set the other to N6!C1 and so on I get an error stating
“Error -1074135008 occurred at ki4800_2 Configure Voltage Level.vi Possible reason(s):IVI Error in the method "get_Item" in the component "Kikusui4800". E_IVI_UNKNOWN_CHANNEL_NAME: Unknown channel name (N6!C1)”
I am assuming that I should be able to change the node number and that will change the supply that I need to use. Everything works great if I use N5!C1 I can change any of the supplies to address 5 and can control it with no problem. I can even have multiple supplies with the same address N5!C1 (don’t think I should do that) and change them all at once. I need independent control of each supply.
I am in a pinch here and need to figure it out but could use some help. Any ideas will be greatly appreciated.
Thanks
GBlair
Attachments:
KIKUSUI PS.llb ‏179 KB
Kikusui Ps Controller.JPG ‏63 KB

Can i use 85w 17" macbook pro power supply with the 15"

My 17" macbook pro died so now i have a 15'' which i want to use with the 85w power supply as a spare for it. I'm guessing it would be ok but just want confirmation. Can anyone help?
DUH ! of course I can ....sorry for the post

Yes.
JC

Want references for using ATX power supply with MDD.

There are references all over the place to adapting an ATX power supply for a MDD/FW800. But it would be nice to have links to as many useful ones as possible in one thread -- this one -- without too much superfluous verbiage.
Please post links with brief descriptive comments or, if you have some hard information that's not easily linked to, please post it as concisely as possible. Hopefully, the resulting thread will be useful to many people, and not just to me.

Watch these great YouTube videos
http://www.youtube.com/watch?v=xICg592xJTg
http://www.youtube.com/watch?v=j7RDGy34tjU&feature=fvw
Look at these links.
http://efeion.blogspot.com/2007/12/power-supply-fun-part-2.html
http://www.applefritter.com/node/23857
 Cheers, Tom

Power supply with geforce 5950 ultra 256

Similar Messages

Maybe you are looking for