Power Support crystal film iPhone 4s

Hi,
Will the power support crystal support film for the iPhone 4 fit the 4s?
Thanks, Jerry

I used an older iPhone film on my 3G and while it will work fine, you can definitely notice it because it just doesn't quite fit. With a close fit, the film blends right in so with the 3G it doesn't. I opting to wait for 3G-specific films.

Similar Messages

Power Support Crystal Film for original iPhone on iPhone 3G?

I bought a Power Support Crystal Film set for my original iPhone last year. The package comes with two screen films. I've only used one and have one left. Do these screen films also fit on the iPhone 3G?

I used an older iPhone film on my 3G and while it will work fine, you can definitely notice it because it just doesn't quite fit. With a close fit, the film blends right in so with the 3G it doesn't. I opting to wait for 3G-specific films.

Problem Using Power Support Crystal Film Cover (OT??)

Sorry if this is OT but I couldn't find any other categories it might fall under.
I got my iPod a few months ago along with the Power Support crystal film cover. I totally love it except for the 3D clickwheel cover. Since Day 1, it has not stayed on the clickwheel. I've cleaned both the clickwheel and the 3D film but it has never stayed on. It pops up (literally) when I press the button in the middle to select a song on my iPod.
Can someone please tell me how to make it stay on or if there is a way to clean it that'll make it stickier. The front and back covers work fine. Thanks a bunch!!

Apple is making the click wheel now, so the new material probably won't hold the plastic cover. Mine won't stick either.

Power Support Crystal, Front And Back, HD Anti-Glare Film Sets REVIEW

Any one try these yet? i want crystal clear ones.... and a little for the scratchs.
They now have 2 piece ones...front and back.

tonefox wrote:
rbrylawski wrote:
Not trying to give more profit to Apple, but after having tried to install screens myself (I am not super patient), nor did I do a good job, I'd rather let Apple do it for me.....
Ah, I understand. Good luck, then. I must confess that I do not believe that some guy who works in an Apple store has powers any more magical than mine... BUT would Ford install some third party accessory into a car for you and give you a guaranteed result?
Sorry - I do not believe you can depend on Apple or their retail staff to install a third party skin, if you cannot do it yourself. Why should they? What is their reward?
Dunno, but an Apple guy put the Power Support shield on my iP3G (which I bought at ATT not Apple) and he did a great job. I realize it's like a $15 purchase, but he did it.....

Sgp oleophobic vs power support crystal screen protectors...

Ok ive had power support since thevery first iPhone came out...ive also used theanti-glare in certain times...ive also used body guardz and zagg...
Now i have a zagg full body minus the screen sheild inside the apple bumper for my iphone 4...
I already have the power crystal film on it...but i saw a screen protector with an oleophobic coating made by SGP...but then Power Support said their hard coat resists fingerprints too...
Do both of them have oleophobic coating then?

Ok...i recieved my sgp oleophobic protector...easy install like the power support...look somewhat clearer...after installing and removing the protective cover from the front of the protector...it felt like sliding your fingers on plastic wrap...it was not smooth...until i moistened the lint free cloth wipedit a bit...now it smooth as glass...i guess it had some left over sticky residue...now i can say its a bit better than power support...
This thing feels like the iphone screen, the power support felt plasticy a bit...plus i got the same oleophobic coating on it...awesome!!!

Power Support Crystal Shield is AWESOME

Got my PowerSupport Crystal Shield in the mail today - it is 100 times better material than the invisibleSHIELD. No orange peel textured look, no glue, no water.
Easy, easy, easy to apply. And also extremely simple to remove and re-apply if need be.
PowerSupport is CRYSTAL clear and VERY shiny, just like the normal nano surface. Can NOT tell it is on there when applied properly.
Some installation advice - the shield itself come on a clear piece of plastic that the shield will not adhere to. This clear protector for the protector is the perfect tool to apply, remove, and re-apply the real shield if need be. It's the right thickness to get under the shield - the instructions mention using cellophane tape to remove the shield - it's MUCH easier to use the clear plastic they ship with it to get under the shield and pull it back up!

Sure - here are some pics! I tried to take these so people could see how reflective and clear the PowerSupport film is...
http://www.stormcell.com/nano/IMG_3667.jpg
http://www.stormcell.com/nano/IMG_3668.jpg
http://www.stormcell.com/nano/IMG_3669.jpg
http://www.stormcell.com/nano/IMG_3670.jpg
Note on these : in the image of the back - the texture you see in the metal is the reflection from the ceiling - IT'S THAT CLEAR AND SHINY.

IPhone 5 Screen Protectors Belkin, Power Support, Spigen SGP, Zagg,

This is my first iPhone ever. I have been doing some research (like everyone else) on the best screen protectors. I found two products at the Apple store, Belkin's IRIS Anti-Glare Film and Power Support HD Anti-Glare Film. I ended up purchasing the Belkin one. Later on, I did some research and found very little on the Belkin, it's not even listed on their Web site. Did I buy a lemon? I also notice people are talking about Zagg and Spigen SGP. These both seem to have the same performance but Zagg is more expensive.
I am looking for something that is scratch resistent, very clear, smudge resistent and perhaps anit-glare. I was hoping to get some feedback on these four products.

You didn't buy a lemon; the Belkin Iris Anti-Glare is what it is, a clearer but less smudge-resistant version of the venerable Power Support Anti-Glare film, whose superior anti-smudge and silky-smooth texture is offset by the relative graininess it imbues on the iPhone's retina display. The Spigen SGP is similar to the PS AG, I hear; the Zagg appears to have more of an "orange peel" look and feel to it, but its main calling card is its toughness and durability.
It may come down to—as with all AG/anti-reflective films—how much relative importance you attribute to unavoidable pixelation vs texture/anti-glare properties.

Could I use a power support screen protector to cover the back of my iPhone

I bought the ZAGG Invisible shield thinking it was the full body but realized it was only the front. Can I use a power support screen protector to cover the back of my iPhone 3G?

From my research, the ONLY way to get the back cover of the Zagg shield is to buy the complete package (front and back). The ONLY place I've seen this offered in online at zagg.com.
I'm only using the front Zagg shield and for the back, I'm using the Richardsolo.com Contour Flip. I've tried several other combinations and for my money, this is the way to go.

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
Has anyone asked Apple directly about this?

Hi there Apples or Pears,
I would recommend taking a look at the troubleshooting steps found in the articles below.
Charging your iPod battery
http://support.apple.com/kb/ht1384
iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
-Griff W.

HT4528 I would like to know how much it costs to repair a power button on an iphone 5?

I would like to know how much it costs to repair a power button on an iphone 5?

https://ssl.apple.com/support/iphone5-sleepwakebutton/

After the update to iOS 8 the power button of my iPhone (iPhone 5 16gb) starts to fail

Hello guys,
After the update to iOS 8 the power button of my iPhone (iPhone 5 16gb) starts to fail and before the update it was working properly.
I'm a certified iOS developer and this same situation occurred when i tried to install the iOS 8 beta 2 on the same iPhone i mentioned above, but i had to reinstall the iOS 7.1 just a few days later and the button starts to work normally again.
Any thoughts about this?

Have you checked to see if your phone is eligible for the Power button replacement?
https://www.apple.com/support/iphone5-sleepwakebutton/

Advice needed for applying the Crystal Film

I am disabled and have hands that don't quite work normally. In spite of that, I was able to get the "crystal film" stuff applied to my iPhone to better protect it. I'm having a lot of problems getting the bubbles out. Any advice?
I'm using a graphic arts "bone" on top of a soft cloth to very gently "scrape" away those bubbles but is this the best way???

I had to use tape as well....apply a small piece of scotch tape to the bottom right or left corner and lift up -- then gently replace it and watch it as it settles to assure you have no bubbles in it. If you have trouble doing it yourself, ask someone to help you with it -- you will love it once it is on.
My first one didn't apply correctly and once it was on, it still seemed to have a bump in it, so I figure either I folded it somehow, or somehow it got a bump in it from the packaging....
But the second one worked like a charm.

Multiple problems: Touch Screen and Power Button on my Iphone 4S.

My power button on my iphone will click but it doesn't recieve any response from my phone. Also, my screen isn't working at all. The only button that works is the home button. The phone is only a couple of weeks old. I recieved it in the mail from apple and it has run smoothly up until now. It is a very random occurence and I would like to have it resolved quickly. Any suggestions?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Make an appointment at an Apple store to have the phone checked out. Or call Apple Support.

I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message. "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message. "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

Hello GuynStPete,
Thanks for using Apple Support Communities.
I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Take care,
Alex H.

Power button on my iphone 5s is not stable

Hi
I've purchased recently the new iphone 5s by friend in usa,
Since opening the box I noticed that is the power button on my iphone 5s is not stable ! It moves up and down and I've comparing it with several friends iphone 5s and it was the only one in this case, i am from jeddah saudi arabia and There is no an authorized dealer in my country for repair within the international warranty Please help me and Thank you And I wish you a happy day
# sorry for may bad english

Thank You
but My friend returned back to Saudi Arabia

Power Support crystal film iPhone 4s

Similar Messages

Maybe you are looking for