Power surge Ipod

So about a year ago my Ipod had some sort of powe surge. I plogged it into an outlet and the whole thing lit up and then died. I could not reset it or get it to turn on at any cost, I ended up sending it in to be fixed. Now a year later it has done the same thing. I am just wondering if anyone knows what the problem is, do I have a faulty Ipod. I have the old 10gig one, with a touch wheel and all that. I got it 2 years ago. Let me know if I can fix it any other way then to send it back again. Thanks

Did you use the iPod in an unsupported docking system say for a hifi ? If so, you may find that the connecting socket on your iPod is a little slack. Try holding your usb cable on to the iPod with a couple of elastic bands before you plug it into your computer. With iTunes up and running and your iPod connected this way, toggle the hold switch and restart your iPod - does it register now?
nevwebb

Similar Messages

  • IPOD Shuffle not recognized by computer, and caused a  USB power surge

    Device is not recognized by computer, and I tried the listed support recommendations.
    The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

    Hi JBR,
    Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
    Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
    After that, open itunes and life should be good.
    Hope this helps!

  • I have an ipod touch 4 gen and i reg it on my desk top then a power surge blew it up so i put i tunes on my laptop but now it will not let me do anything to the ipod can any one help me

    i have an ipod touch 4th gen i reg it on my decktop then it had a power surge and blewup so i put itunes on my laptop and now it will now let me do anything to my apps pics or music what can i do i tried to reinstall but that didnt work i dont want to restart because of the pics and video that is the only copy i have now please help me

    Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
    Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
    If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
    Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
    Do the same again and choose "backup", to create a manual backup without syncing.
    Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
    Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

  • My computer says "Power Surge in Power Hub" when My iPod touch is plugged in. How can I fix this?

    I have had an iPod Touch 5th Generation for a few months now. I recently updated to iOS 7. Now, when I plug it into a computer it says "Power Surge in Power Hub". It haas never done this before and when I plug it into a different computer, the same message comes up. How can I fix this?

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. Your error message is a symptom of a bad cable
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar                 

  • IPOD causes a power surge on every port on the computer

    My ipod died and was replaced with a new 40GB model. Now, it causes a power surge everytime I attach it to a port. Of course, Dell says its a problem with the ipod. I don't know what to do? Has anyone had this problem? How was it solved?

    That's what I figured but I wanted to be sure. The iPod charges while it is connected to the USB port. The ports of many notebook computers and most unpowered hubs supply less power than the iPod requires - hence the message. You'll need to get a powered USB hub (one that has its own power supply). They can be found at Radio Shack, as well as just about any place that sells consumer electronics for as little as $15.

  • Can my ipod be revived after a power surge?

    Can my ipod be revived after a power surge?

    The power surge was into the iPod through the outlet where it was plugged in with a power cord.  I tried the steps mentioned and none seem to work.  When I plug the iPod into the computer via the USB cord...the iPod gets very warm in one of the lower corners but doesn't power up or allow me to recover it.  I'm guessing it's fried.  Thanks anyway for the assistance.

  • Power surge killed ipod?

    Well, I have a 30GB iPod classic, worked fine every since a friend gave it to me, battery was getting a bit old, but it worked fine. Well one day I plugged it into my dads computer and a little pop up told me there was a power surge in the USB port, and ever since then, It wont turn on. I plug it into the wall or my computer or anywhere and it wont turn on. I've tried resetting it with the Menu and Select button. I don't know what to do, is it dead, or fixable? I had a lot of stuff stored on there. Thanks in advance.

    Did you use the iPod in an unsupported docking system say for a hifi ? If so, you may find that the connecting socket on your iPod is a little slack. Try holding your usb cable on to the iPod with a couple of elastic bands before you plug it into your computer. With iTunes up and running and your iPod connected this way, toggle the hold switch and restart your iPod - does it register now?
    nevwebb

  • IPod Shuffle (2nd Gen) ruined onboard USB hub (Power surge on hub port)

    A user that I support fried his onboard USB hub on his laptop by plugging in his new iPod shuffle. Before doing this, everything else worked, but now, no USB devices will work.
    When he tries to plug in his wireless keyboard/mouse receiver, it says "Power surge on hub port" as a popup balloon (this is Windows XP Pro) above the system tray. When he clicks on it, it says:
    "A USB device has malfunctioned and exceeded the power limits of its hub port. You should disconnect the device.
    (The location of the device is shown in bold type)
    To reenable the port, disconnect the hardware and click Reset. If you click close, the port will no longer function."
    Options: Reset, Close
    Neither resetting the port nor rebooting the computer will resolve this problem. Most USB devices are not recognized at all (Windows does not respond to them and they are shown as Unknown Devices in the Device Manager).
    This affects not only the USB port that the iPod Shuffle was initially connected to, but all the USB ports on the computer.
    From everything that I can tell, the USB hub built into the motherboard is fried and needs to be replaced.
    Has anyone else had this problem?
    Is this something that Apple will admit to and pay for?
    Kevin Eves
    Systems Engineer
    Hardware information
    Laptop Model: HP compaq nx5000
    Motherboard Name: Hewlett-Packard 08BC
    Motherboard Chipset: Intel Montara-GM i855GM
    Universal Serial Bus controllers:
    Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD 5.1.2600.0
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 5.1.2600.2180
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 5.1.2600.2180
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 5.1.2600.2180
    USB Root Hub 5.1.2600.2180
    USB Root Hub 5.1.2600.2180
    USB Root Hub 5.1.2600.2180
    USB Root Hub 5.1.2600.2180
    Driver Description: Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
    HP compaq nx5000 Windows XP

    I called Applecare and they claim that an iPod Shuffle could not have done this because it never sends power over USB, but only charges. They said to contact the manufacturer of the computer.
    I am not convinced of this claim, however. Possible defects in the product could still cause this, such as it creating a short circuit and having power channel from the USB hub back into itself.
    This is just off the top of my head, but can any of you think of another explanation?
    The timing of everything working before the iPod Shuffle was connected and nothing working after it was connected lays the blame squarely upon the iPod Shuffle. If there had been an issue with the motherboard or its USB hub, it would have shown up before; other USB devices that draw significant power never triggered such a hypothetical defect.
    If anybody has another idea how the iPod Shuffle could have done this or knows of a way to convince Apple to take this seriously, please let me know.
    Kevin Eves

  • Shuffle power surge ?

    I bought a shuffle to mess around with,after leaving it to charge for 4 hours, it is not recognized by my PC, and I am getting the message 'power surge on hub port - A USB device has exceeded the power limits of its port hub, click to reset' Net result is the ipod is not recognized either by my PC or itunes anyone seen this one before, and is there anything I can do?
    Thanks

    EL MICKO wrote:
    I never said High powered USB 1, I just said USB 1, meaning the first USB, that is not high powered
    Actually, you never said USB 1:
    *"Some older laptops don't have USB 2.0, and shuffle won't work if it isn't USB 2.0.."*

  • Power surge on hub point

    I have a 60GB Ipod colour and use it to save my photos. I have just come back from Athens - which supplies 260v/50Hz power. Now I am back in England (240V/50Hz), I get an error when I plug the Ipod into my Win XP Dell Inspiron 1100 laptop. The error is: Power surge on hub point. There is an instruction to click on the error notice, but the mouse is disabled while this notice is displayed. The Ipod is working fine and is showing all the pics I took in Athens and saved to it, as well as playing the music I downloaded to it before I left for Greece. The Ipod is using the latest V7.0.2 software. I have performed a reset by switching the Hold key, as well as a reboot using the Menu/centre switch. No result. Any ideas, please?

    Sorted!
    I'm not sure how this worked, but the Ipod is working fine on the port now. I changed to mouse from the hub to the PC, so I could click the notice when it came up, AND I put the Ipod on the charger until the Ipod said CHARGED.
    I have plugged the Ipod back into the hub and it's been accepted, with no errors. AND I have access to my pics - thank goodness!

  • Power Surge on the USB Port.

    Well, for the first time ever in my 2 years of having this IPOD plug for my 5th Gen...I wanted to upload some pics on my ipod, but i plugged the port into the computer and the other part into my ipod, and it said my port had a power surge of some sort. So i can't charge my ipod via computer, but it works in my ipod player (which is my deck that i have in my bedroom to play music through speakers) and it works...And other USB items (i.e webcam) work in any port...So its seems its just the plug.
    It all of a sudden worked when i just plugged it in as i wrote this to be sure what it said, but does anyone know why this happened?

    When you say "port" do you mean the iPod cable that has a dock connector on one end and a USB connector on the other end? When you have your iPod connected to your iPod player does the player have a dock connector on it such that the iPod plugs directly into the player? If the answer to both of these questions is yes then I would suspect that the iPod cable is bad or on its way out. Another test of the cable would be to connect it to an iPod power adapter that plugs into the wall and see if the iPod charges.
    The other possibility is that there are other USB devices connected to your computer and when the iPod is connected the USB ports on the computer are unable to supply sufficient power to all of those devices.

  • "Power Surge on Hub Port" Message doesn't go away...

    Hi guys,
    I reset the port as recommended but the warning message window pops up again. I used PC doctor to diagnose the USB and it was OK. Though both of the usb port works (...it's a T43p) it keeps giving me the power surge message (so I started to keep it and minimize it).
    Does anybody know how to solve this issue?
    Thanks

    I am not sure, but some of these might be helpful:
    iPod’s Battery Will Not Charge
    Beef Up iPod Battery
    Measure iPod’s Battery
    Caring for iPod Battery
    About iPod Battery
    Tips and Tricks for iPod Battery
    iPod Battery FAQ
    I hope this helps!

  • "Power surge on Hub Port" Message

    I had to order a new replacement iPod and when I plugged it into the computer after fully charging it. A "Power surge on hub port" bubble keeps popping up in the bottom left tray. I've tried to follow all of the iPod tutorials but nothing works...any suggestions?
    Thanks for any help

    This sounds like your computers problem then and not apples.
    Adjusted the usb port properties? :s
    If you're using Windows XP, maybe you should try uninstalling the usb ports then re-instaling them
    on the start menu, right click "my computer" then click properties. Choose the "hardware" tab, then click "device manager"
    Scroll to the "Universal Serial Bus controllers" at the bottom. expand it by clicking the + then right click the top usb item and uninstall it. Make your way down the remaining items and uninstall them. ((ONLY THE USB DEVICES!!!))
    Once this is done, right click in the window and "scan for hardware changes". THen right click the usb devices with red crosses and choose the option to click "install" or "update driver"
    This should restore origional settings to the devices and then all should work.

  • Power Surge w/computer 5th Generation - HELP!

    I've now connectd my IPOD into my computer and get the power surge message. I've reassigned the ports from the back and the front. I've even reset the entire Ipod...do I need to reinstall Itunes or what is the deal? I cannot add any more songs. Thanks.

    If you dried it is a sealed container with uncooked rice for a week and periodically changed the rice and it does not work it is dead.
    Apple will exchange your iPod for a refurbished one for $99 for a 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price                             
    You can do it at an Apple store by making an appointment:
    Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • Power Surge On hub Port :(

    when i plug my usb cord in. it says Power Surge On Hub Port, can anyone tell me how to solve this problem. it wont allow me to charge or put songs on my iPod. Help is greatly appreciated.

    I have the same Multi-Burner drive, an X61s, and an X61. I don't get this message on any USB port. I also tried plugging it in with an audio CD already inserted so that it would draw power spinning up the disc right away.
    Is it possible that you have other power-using USB devices plugged in, and the Multi-Burner just happens to be the last one plugged in, pushing the power use over it's limit?
    If you get this message when the Multi-Burner is the only USB device plugged in, I think you have a hardware problem.
    I don't work for Lenovo. I'm a crazy volunteer!

Maybe you are looking for

  • Java package concept in ABAP Objects

    Hi, just a question on grouping of classes in ABAP Objects. In Java, you can group classes by "package" to avoid namespace collision, my question, in ABAP Objects, how do you group classes to avoid namespace collision? I know that there is package co

  • Is there a way to set wireless network priority on iphone? If not, there should be!

    Is there a way to set wireless network priority on iphone? If not, there should be! I have a wireless router with dual band signals, as well as an extender at the other end of my home... it would be nice if I could set a priority list so my phone kno

  • Help needed in creating easy flash photo menu

    First hello to all of you And greetings from Poland Could somebody help me or give me a guide, maybe a tutorial how to create an easy flash photo menu in AS3 or 2. Let me explain what I want to do this is my image menu done i PSD is my image menu don

  • PSE 8 - can I delete Previews?

    I have a bunch of photos I had moved off an old hard drive to CDs with PSE3.  They showed in the organizer as "offline media." I have been moving them to my hard drive (E:\My Pictures\foldersxxx).  For whatever reason, sometimes it went well and I wa

  • Excel 2010 ignores print server's default color settings.

    Excel 2010 ignores print server's default color settings. Our Setup: Printers are hosted on Server 2008 R2 Print Server.  Two local printers are created on the print server for each Xerox MFP that we have.   Example: Xerox MFP (B&W) - Default setting