Power transmission project

Hi Gurus.
I am shifting to power grid transmission project.I need face client interview.So
Could you please give the idea of Power transmission project's business scenario?
Please tell me the areas i need to prepare?
Bcoz as per my idea they maintain like pipeline material?
I need overview of power projects business flow.
So kinldy provide this.

Hi,
You have to look into different Bussiness processes.
1. Normal purchaing cycle
2. imported purchasing cycle.
3. Vendor Evaluation
4. Refurblishment Process
5. Split valuation
6. And stock transfers
Thanks & Regards,
Kiran

Similar Messages

  • Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

    Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • Pause button with imported power point project

    Hi
    I imported a power point project and published it in flash swf, and when I play a slide (in flash) and try to pause the play it does not work and  it continues to '
    play until the end of the slide and then it stops and when I click it continues to the next slide,
    How could I make the play pause the play,  when I click on the pause button (see attached snapshot)
    1- using captivate 5
    2- ppt 2003
    3- output: flash swf
    Appreciate any help

    Hello Lilybiri
    Thank you for your patience with me and I will attach 5 snapshots (for higher resolution, right click on the image and choose open with I.E. or you could zoom in the page)
    You also asked me about the click box; yes I inserted click boxes in only 2 slides (example: slide 3), as a test, in the hope of making the pause button work but it did not do the trick, you also asked about the image in the background, it is an image and not a looping video or animation.
    following are the 5 snapshots (if they do not fit in this message I'll attach them to other following messages):
    Many thanks

  • MSI-6967 power transmission level

    Why I can't change the power transmission level on my computer.

    Dear starfoxACEFOX,
    Thank you for reporting this issue.
    Here is the latest Beta BIOS for your review.
    The latest Control Center v1.0.173 from our website:
    http://www.msi.com/index.php?func=downloaddetail&type=utility&maincat_no=1&prod_no=2025

  • Power point project won't move to the next slide

    I create a project with several power point slides and then some automation and then slides again. The automation created within captivate moves from slide to slide. But the power point slides don't move to the next slide automatiacally. I have to click on next to make them move. I looked in the manual and can't find a source to tell me what to do with the slides to make them move automatically (like a slide show would be).  Any suggestions?

    Hi there
    When you import a PPT, you have two options. One option allows the PPT to just play through. The other option inserts a Click Box object on slides that prevents the slide from moving forward until clicked by the user. The choice is made in the dialog.
    The default is On mouse click. After your slides arrive, the timeline looks like this:
    To allow the slide to move forward, delete the Click Box.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Lost Power - Now Project Won't Open!

    I'm working on an iMac (10.10.2) with an external hard drive.
    I was working on the project and some construction next door caused the power to go out. Now the project won't open. Every time I try to open it, the program crashes. I can open other projects from the same hard drive, just not the project that I was working on.
    HELP!

    IIf that opens, then go into the Original Media folders and look through all the clips and see if they're OK. Any clip that has an actual image that appears in the Finder should be OK. Any clip that has a generic QT icon may be corrupted. See if it will open in the QT player. You can also use QuickLook in the Finder and step through the files in the list to see if the run.
    if you were titling also check through all the Fonts on your system and make sure none have generic document icons.

  • Can anyone provide me with an lm317T for use in a power supply project

    I'm trying to simulate a power supply for a college project and need an lm317T.  Can anyone provide this in order to add it to my circuit.  I'm not worried about adding it to my database.

    Hi Steve,
    I googled "LM317T SPICE model" and found this website, someone posted the model for this part
    http://www.electro-tech-online.com/general-electronics-chat/18270-lm317-spice-model.html
    Now that you have the model, you can create you own component in Multisim.  If you don't know how, please refer to this page:
    http://zone.ni.com/devzone/cda/tut/p/id/3173
    Tien P.
    National Instruments

  • Power point project

    hello, I have to do a powerpoint project that must be compatible on both windows and mac, and I want to include videos, photos and text, the only one of them that is causing problems is the video, so I was hoping one of you geniuses out there would be able to recomend some software from ripping some home movies into files that can work both on windows and mac, I've tried "hand brake" on my powerbook, and it wont work on windows, so tha'ts where I am now, any help would be greatly appreciated.... oh and the project is due monday, so.... the quicker you tell me how to do it.... the more I"ll love you!

    Hi there
    When you import a PPT, you have two options. One option allows the PPT to just play through. The other option inserts a Click Box object on slides that prevents the slide from moving forward until clicked by the user. The choice is made in the dialog.
    The default is On mouse click. After your slides arrive, the timeline looks like this:
    To allow the slide to move forward, delete the Click Box.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Importing Cyberlink Power Director project files to Adobe Premiere

    I am trying to switch from Powerdirector to Adobe Premiere because I felt like a needed a more powerful video editor. I already have a project that I started in PowerDirector and I don't really want to start it over from scratch or just export what I have into a rendered video file. Is there any way to import these sort of project files to Adobe Premiere, or some sort of converter?

    No, you have to start from scratch, or better, finish in Powerdirector and only start new projects in PR.

  • 3D power point images don't import

    Hello,
    I have a Power Point template I'm trying to import - almost
    all of the slides contain images with 3D shadings, shadows, and
    perspectives.
    Once the slides are imported into Captivate, all of these 3D
    effects are lost, and as a result, in several cases the diagrams
    appear to be out of alignment.
    What am I doing wrong and how do I fix it?

    quote:
    What am I doing wrong and how do I fix it?
    (1) You are misunderstanding how Captivate treats
    Power Point project imports, and (2) there is nothing you can do to
    fix it.
    Power Point slides are imported to Captivate as merged
    (flattened) images. All transition effects are lost during the
    import, with only the finished slide being imported. This is the
    way Captivate treats Power Point slides and the behavior cannot be
    changed. Sorry.
    .

  • Extremely large captivate project files

    Hi there,
    So we recently hit a problem with Captivate, we use both english and arabic for our courses and one of our projects is about 27 slides (including 7 question slides) and the final captivate file size for the arabic course (not published) is about 1GB, however the english course is a mere 120mb using the same material, only difference is in the text.
    I just tried deleting all the slides and selecing all unused data and deleted them for the project hirearchy, but I ran into another problem which is that the project file dropped 20mb in total and its still close to 1GB.
    I would also like to add that the published release for the arabic course was around 80mb.
    Adobe Captivate Version :  7.0.1.237
    Any ideas? let me know if more information is required..
    Thank you!

    Holy cow!! Adobe has a 3rd level of support? Cool. Only
    partially kidding ... I really didn't know you could access various
    levels. Is the 3rd level where you get to talk to the actual
    engineers? Just wondered ...
    Joel, in my experience it is often helpful to go to the most
    basic approach in trying to isolate a problem. For instance, you
    can eliminate the PPT being the cause of the problem by creating
    another to try importing.
    You can eliminate computer resources (on your own machine) by
    importing a tiny, tiny PPT file and work up to a larger one.
    And finally (for now), have you tried to use Power Point's "
    File > Page Setup" to reduce the footprint (size) of the
    PPT you are trying to import into Captivate?
    This has been known to help, and at one time years ago I even
    had a formula of sorts to get the size of the PPT to compliment the
    size of the Captivate stage (slide). Sadly, I can't find that now,
    but I would think you should keep the aspect ratio (AR) the same,
    and that should help.
    For instance, if the Captivate project is 800x600 (pixels),
    the aspect ratio is 4:3 (as it is for the standard computer
    monitor). Therefore you would want to set up your Power Point
    project with that same AR so that the import process is not forced
    to change AR, or to crop the imported images.
    Hope there is something of value in there for you. When you
    get up to that level of help where you are talking to the President
    of Adobe, could you drop my name ... every little bit helps.
    Have a very nice day JoelStern!!

  • WAP321-E-K9/max RF output power of 802.11a?

    Does the WAP 321-E-K9 (as 5GHZ frequency) supports the 802.11a?
    If yes, please specify exactly the output power transmission in dBm?
    Is it possible to have the 5GHZ frequency that not support the 802.11a? Because in the technical sheet of the WAP 321-E-K9 there is no specifications about the output power transmission (dBm) of the 802.11a standards ( only 802.11b/n/g are specified) ?

    Hi commercial7,
    I hope this helps:
    From the product documentation on the WAP321-E-K9 it appears that the WAP only supports 802.11b/g/n protocols. 802.11a (5GHz) is a legacy protocol that was outdated with the release of 802.11n (2.4/5GHz). While WAPs that use 802.11n are backwards compatible (support 802.11a/b/g devices), WAPs that use 802.11a won't support devices that use newer protocols. 
    According to the WAP321 Wireless-N documentation, transmitted output power: 802.11n @ HT20HT40, MCS15: 13 dBm
    Also according to the WAP321 Wireless-N documentation, receiver sensitivity: 802.11n: 300 Mbps @ -64 dBm. Since 802.11n should support 802.11a, you may want to check the hardware specifics for the 802.11a device you are trying to connect with.
    Does this answer your question?

  • Major Differences between Project Server and Project Proffessional

    Hi,
    We are planning to use MS Project with SharePoint. In the initial research i came to know that we will need MS Project Professional to syn task lists on SharePoint. We are looking at a solution where all the Project Leaders (Across the world) can update
    their project statuses online using SharePoint (right now this is being done manually).
    I then came to know that we can access MS Project on SharePoint using MS Project Server. I am now not able to decide on which one to choose. So I want to know the major differences between MS Project server
    and MS Project professional. Which one would full fill my requirements. I cannot limit my requirements to only updates. but also would want to add some extra features like Site Mail box and Project Issues log, so that my Project Management is more effective
    and is better.
    Please answer at earliest
    Regards
    Srikar Gundabathula 

    Srikar --
    Microsoft Project Server 2013 is an enterprise project management (EPM) application in which all data is stored in a SQL Server database.  This EPM software application allows organizations to manage dozens, hundreds, or thousands of projects and
    to manage dozens, hundreds, or thousands of resources as well.  To use Project Server 2013, your PMs would each need a copy of Microsoft Project Professional 2013 and would use this software to plan their projects and to save and publish the projects
    to Project Server.  Your team members and executives would use their Internet Explorer to access the web-based user interface to Project Server 2013 called Project Web App, or PWA for short.
    In PWA, your team members can use either The Timesheet page or the Tasks page to report progress on their task assignments.  In PWA, your PMs would be able to see the updates from their team members and be able to approve those updates.  Once
    approved, the task updates are applied to the appropriate project so that the PM does NOT have to retype the updates.  For executives, PWA offers the Project Center page which shows the portfolio of published projects in Project Server, where they can
    see the current status of each project.
    Beyond this, Project Server also includes a Business Intelligence Center where your Project Server administrator can create very customized reports for various audiences.  In brief, there is a LOT of power in Project Server 2013.  If you think
    you might want to use it, you have two options:  (1) Buy the software, install it yourself, set it up yourself, and maintain it yourself, or (2) contract with Microsoft to use Project Online, which is a hosted version of Project Server 2013 that is maintained
    by Microsoft in the cloud.
    You can learn even more about Project Server 2013 at the following link:
    http://office.microsoft.com/en-us/project/project-portfolio-management-for-the-enterprise-project-server-FX103802061.aspx
    Hope this helps.
    Dale A. Howard [MVP]

  • Any ideas how to control the html color?

    I've never had to do this before- but I'm trying to change
    the background color of the html page that holds my master.swf on
    load of an external swf... I'm not even sure as to where to begin
    to look-- if anyone has any suggestions- that would be lovely...
    most of the google search results are just giving me flash 4
    tutorials on how to change a movie clips color... ughhh.
    Thanks!

    Powergroup,
    You may want to post a little bit more about your intended application.  I know a TCSC is a power electronic device used to vary the series impedance of power transmission lines by varying the delay angle of the thryistors in the device.  If the inputs for the delay angle for the TCSC need to be updated deterministicallyyou might want to look into using LabVIEW Real-Time Software and Hardware to control the inputs.
    However if project entails developing a feedback control scheme to vary the impedance of a transmission line using a TCSC based on a reference input you may be more interested in how LabVIEW would be able to develop the control scheme. I imagine you would want to take measurements to demonstrate the correctness of the TCSC controller based on this reference input which would also be a consideration.
    Please post a little more about your application as it may help determine how to go about controlling your TCSC.  Thanks.
    Bassett

  • Exporting to Media Encoder and file locating issue

    Ok, Now I've read a LOT of threads trying to find a solution to this but none of them have answered my problem exactly, so here's what I have:
    Running a New computer with a clean install of Windows 7 64 bit and Adobe CS4 Master Suite
    Hardware:
    Dell Precision M6400
    Intel(R) Core(TM)2 Duo CPU  T9900 @ 3.06 Ghz, 3.07 Ghz
    12.0 GB Ram
    Premiere ran fine for a while, but soon I've run into a problem where I try to export to the Media Encoder and I keep getting the error:
    "Could not read from the source. Please check if it has moved or been deleted"  over and over
    I have deleted recently imported media one at a time to try and locate what's causing it since it wasn't doing this before, but no luck.  So I restarted the program but now the Premiere project won't open.  The task bar loads until about 2/3 in and stops there indefinitely, I've left and came back to it 2 hours later and it hadn't moved.  I back tracked and found a previous save that will open, but it still will not export, it still says "Could not read from the source. Please check if it has moved or been deleted".  And as soon as I update anything and save a new file that one will not open either.
    I've tried recompressing each video file into a format I know works well with Premiere but still no difference. 
    This problem has plagued my workflow for a while now and I can't take it anymore.  I've had to restart clean project files to try to work around it but I lose so much progress, and the work around by rendering the premiere file through After effects hasn't worked either.  The error I get there says "Dynamic link server is busy".
    Here's what the problem is not:  It is not because I uninstalled CS3 or any other previous version, I've never had it on this computer.  It's not a plugin problem, I don't have any plugins on this install except for the default ones that Came with Adobe Master Suite for Premiere Pro. 
    Someone please help me, this is ridiculous that I have had to trouble shoot the program this much.  Both CS4 and Windows 7 have been around for over a year now and neither are in Beta Editions

    Wow, sorry, forgive me if I've seen most forums work with a lot less, and your dismissiveness led me to assume you hadn't read my post.
    All of this is new and up do date as far as Adobe and Windows updates go, that's Version 4.2.1.
    My projects for this are all in NTSC Widescreen DV 24P, the particular sequence that I render from is in that format as well, although regardless of which one I use the problem keeps occurring. 
    My renders for my recent purposes have been compressed in .h264, IPOD video Large.  The codec I'm rendering in also doesn't seem to matter, because I've tried this in .avi., .mov, .h264, .wav, etc. and all with various settings that I thought might help, but the encoder quits encoding 4 seconds in and gives me the error that it can't find the media.
    And I didn't mention the media type and what not because it seems irrelevent of what I use this problem keeps happening.  I'm pretty sure it's a problem with the project file or perhaps the media encoder or both.
    And I don't know what you mean by "disks"
    Do I have a Raid set up on my hard disk?  No, I have two 0.5 TB hard drives, Programs on one (C:\) Projects on the other (D:\). 
    What address am I saving the scratch disks to?  I use the default of "same as Project".  Have I tried Clearing it?  Yes.
    I don't think I'm getting at what you're asking.
    And I don't think I've ever used an .xlsm (which is excel?) file and I've definitely never used a Power point project (PPS?) file in my projects.  And they open in their respective programs, although I'm not sure why you asked about that.  Again I'm not sure I know what you mean.
    The Premiere Project (.prproj) file is what I'm trying to open when the progress bar stops at 2/3 the way through and forces me to terminate the process with the task manager to close it.
    It would help to mention that all my projects are animated and I use premiere to cobble them together, so no problems that relate to transferring media from a camera to the computer would apply here.  Most of the files I get out of Maya are in Default .avi or .mov files, and I also use a handful of .wav files for the dialogue and .jpgs for cards and placeholders. 
    I believe that this problem began when I updated a few of the files in my project, but I've been doing that for weeks without incident.  I've been updating them by saving over the old media file with the updated one of the same name, length, and type. 
    I don't work exclusively with Premiere, in fact it's not what I usually use, that would be Final Cut Pro.

Maybe you are looking for