Power up problems on my HP 7520 all in one printer

My HP 7520 e powered down whilst in the process of printing. when the power pack is disconnected from the printer and powered back up from the mains supply a green light shows on the actual power pack. when the power pack is connected to the printer the power fails immediately.

Hi , Welcome to the HP Forums! I noticed that you are having power up problems on your HP 7520 all in one printer. I am happy to look into this for you! Please try the steps within this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed. As it deals with power related issues. (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Similar Messages

Problem setting up HP 6310 all-in-one printer/scanner

I have just installed archlinux for the first time, and so far everything is working great except for a HP 6310 all-in-one printer/scanner. This printer is connected by wire to a router, and the computer communicates with the router over a wireless connection. I have managed to install the printer through cups and print a test page. The problem is getting hplip and sane set up. I belive that if I get hplip set up correctly that that will take care of the sane problem.
Trying to install the printer with hp-setup:
[mike@archy ~]$ sudo hp-setup -i 192.168.1.104
Password:
HP Linux Imaging and Printing System (ver. 3.9.12)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
Setting up device: hp:/net/Officejet_6300_series?ip=192.168.1.104
| PRINT QUEUE SETUP |
Please enter a name for this print queue (m=use model name:'Officejet_6300'*, q=quit) ?
Using queue name: Officejet_6300
Locating PPD file... Please wait.
error: No PPD found for model officejet_6300 using new algorithm. Trying old algorithm...
Found PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Enter a location description for this printer (q=quit) ?computer room
Enter additonal information or notes for this printer (q=quit) ?
Adding print queue to CUPS:
Device URI: hp:/net/Officejet_6300_series?ip=192.168.1.104
Queue name: Officejet_6300
PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Location: computer room
Information:
error: Printer queue setup failed. Please restart CUPS and try again.
Restarting cups doesn't change anything.
Running hp-check gives this:
[mike@archy ~]$ hp-check
HP Linux Imaging and Printing System (ver. 3.9.12)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux archy 2.6.32-ARCH #1 SMP PREEMPT Sat Jan 23 13:53:44 UTC 2010 i686 Intel(R) Pentium(R) III CPU 1133MHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
OK, version 4.6.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.2
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/net/Officejet_6300_series?ip=192.168.1.104
[installation]
version = 3.9.12.29
date_time = 01/24/2010 15:48:05
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
Officejet_6300_series
Type: Unknown
Device URI: socket://192.168.1.104
PPD: /etc/cups/ppd/Officejet_6300_series.ppd
PPD Description: HP Officejet 6300 Series, hpcups 3.9.12
Printer status: printer Officejet_6300_series is idle. enabled since Sat 23 Jan 2010 02:26:45 PM CST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0xb1d at 004:002:
warning: Device URI: (Makeuri FAILED)
| USER GROUPS |
lp wheel network video audio optical storage scanner power users mike
| SUMMARY |
error: 1 error or warning.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
I have a feeling that the problem is here:
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
Something about the backend isn't right, but I'm out of my depth here. Any suggestions would be appreciated.
One other point. It works with no problem in Ubuntu with both hplip and sane, so I know it is possible. I just haven't figured out the trick yet.

Well, it's fixed now, but I'm not sure why. I hooked up a HP 3970 usb scanner to my computer and when I started xsane it not only found it, but also found the 3610 all-in-one on the network. I checked hp-tools, and the 3610 was there also.So everything is working now, but I'm still curious as to why the 3610 wouldn't work with sane and hp-setup until I plugged in the 3970 to the computer.

HP 7520 all in one printer does not print photos well-Does with my Windows machines

I have several computers. Everything works great with printer in Windows environment. I have an iPad and a MACbook PRO with Maverick 10.9.4. The photos are terrible when I print with either of these devices. It almost looks like a negative image. I have checked for updated drivers, etc for the MAC. The ink is HP and the levels are good. It works fine with my PC computers, but not my Apple devices. I have checked system preverences in the APPLE. It appears to be only the photographs. Text prints fine. Any suggestions?
This question was solved.
View Solution.

Hello cpsimon, and welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into photo print issues. I would like to help!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps.
After the updates, I would recommend reinstalling the HP Photosmart 7520 e-All-in-One Printer Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem down loading driver for All-in-one Printer

I tried to down load driver for HP Photosmart C4183 All-in-One on my laptop with OS Windows 7 Premium. During the process of installing each time it request me connecting the USB cable it gives a message that the driver am trying to install is faulty,I also tried it with my Toshiba note-book the same message appears. This is the first time am using this particular product. There some information on my computers Ineed to print ,I am only able to use the copier. Is there a way to repare the USB cable online,if it's the problem

i have a hpo deskjet printer f2180 but lost my disc how do i connect too my lap top

Installing HP Photosmart 7520 all in one printer software

My new HP Photosmart 7520 will not install on my Dell PC. I have the 32-bit Windows Vista OS. When installation begins I immediately get the error message: "Key not valid for use in specified state". I've tried installing the CD and the software from HP on-line, all several different ways. I 've used the troubleshooting download from HP but both methods do not solve the installation problem. I've temporarily disabled the firewall. I've done disk clean-up and defragmenting. I've restarted the PC more than a dozen times during my efforts. Even Microsoft Windows can't install all the software from updates - only the fax portion. If I can get past the point where the error message occurs I think the software will install.
I hesitate to try the Geek Squad. My experience with them is that most of the geeks aren't competent and it's a crap shoot getting assigned one that is. They will be my last resort.
Has anyone had this problem? Does anyone have a solution?

Hey @jimlg ,
Welcome to the HP Forums!
I understand you're unable to install the printer drivers for your Photosmart 7520 printer.
The error you have listed is a Windows error and not attributed to the printer software. You can confirm this with the fact the error occurs when trying to install from Windows update bypassing our installer.
You may want to try following the suggestion in this thread made by @Gemini02 which seems to help resolve the issue for some users experiencing the same problem: Re: key not valid for use in specified state.
Let me know if that helps.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

HP photo smart 7520 all in one printer error. B8867448.

Screen flashing. Message "printer error. There is a problem with the printer. Turn the printer off, then on". When it is turned off, then on, the blue Hewlett Packard screen flashes with B8867448, then it returns to error message.
This question was solved.
View Solution.

June 18, 2014: My HP7520 Photosmart isn't so smart. Error B8867448 shows up in blue screen and then an error screen shows up: Printer Error. There is a problem with the printer. Turn the printer off, then on.
I called HP service and went all the way up through a supervisor to the "higher authorities" in India. I am a valued HP customer so they are giving me a very very special offer. We unplug it for a minute and get the same problem. The cartriges are also stuck and won't move. They say this is the source of the hardware problem. Then he states it is a "hardware" problem. Really.
After several conversations with the "supervisor" he gets my phone number and calls me back from his "personal office desk" with a very very valuable offer that is not available to all customers.
They can only offer a discount on the printer, which is similar to Amazon. I bought it for $138.85 (tax included - it was $129.99 before tax) over a year ago at Best Buy so the warantee is out of date. He offers an HP Photosmart 7520 for $149.99.....?? - after I mentioned my original purchase price, he dropped it to $127.91. I save a dollar.
But get this!!!!
Cartridges are for free.
Free shipping and handling.
3-warantee for free.
Still, my old computer has to go in the trash - stuck cartridges and all.
The new printer will be tested TWICE by HP "itself"! Now that's confidence for me! I why the double testing??
Reason:
It is a reconditioned printer, by the way. I don't like that and patiently mentioned it was not a sufficient offer: $1 discount from a new printer.
Now they are offering $10 off the reconditioned printer. I state that this is still not sufficient.
The phone rep tells me 100 printers are sold to Best Buy and 80 are delivered (what does that mean?!)
Just because the box is opened due to a long shelf-storage doesn't mean it is a bad computer. They test it again since it's old so now it's tested twice and will work for me perfectly. They are 100% sure the printer will work for me and this problem will not happen again.
If the problem DOES happen, they will provide free shipping and a free replacement. (wha-huh?? did I miss something there???)
He says I can go to website: www.hp.com/recycle.com - log onto this website and I can recycle the printer without throwing it in the trash!!! Such a deal! I don't feel any better. Trash is trash as far as I'm concerned.
I replied: "Your offer is not satisfactory to me" and once again I'm on hold. Hold time to this point is over an hour. Sigh.
I'm finding that replying "Thank you but your offer is not satisfactory to me." in a calm voice gets me a little teeny weenie bit further in price reduction, but not worth the bother.
He talks to his supervisor and says they know I'm not happy. So now I get it for $86.10, with free shipping, cartridges and a 3-year warantee for free.
How do I return it? I call them and they send me a label. I have to save the box and repack it. I can also return the printer after 14 days. What if I can't repack it properly with all the parts, etc???? He says to stick it in the box and mail it. That's easy I guess......
This is just as good as a new one, even though it is reconditioned. This is the best offer they can give me.
"Would you like to go for it?". It is not refurbished, it is reconditioned. The difference is there are no cosmetic defects with a reconditioned printer.
I insist on a free replacement. He goes off to talk to his supervisor once again. Silly, eh? I stay calm and patient and it might work! I mention I love HP and have always bought HP products. They are documenting everything, he says. Then I wait again. He has my number and I'll get a phonecall back from his higher authorities within 24 hours.
I confirm - he's in India. Yay. He if there's anything else he can do for me. I reply that would simply like my printer replaced. He wishes me a "beautiful day" and says "bye bye" and hangs up.
Incredible. I'm throwing it away and buying an Epson -810 or a Canon Pixma - consumer reports recommended printer. I hear the trash truck so I'm taking my printer out to the trash (in a nice new trash bag). I won't buy another HP printer again - ever.
Hope this helps. Sorry if you have the same issue. Final time of calls with Indians: 2 hours. OMG. **bleep**. I give up.

Wireless setup problem for HP Officejet J6480 All - in - One printer

I can not get my printer setup wirelessly. When I send a print job to it, the message comes back, printer offline.
I can hook up the USB cable and it prints fine. I installed the software on my IMac as instructed. I used the HP Printer manager. My IMac is setup with the airport and I have a wireless router.
Through the setup button on the printer I printed off the "wireless network test report" and the "HP network configuration" page. They show no errors.
Can anyone help me out?
I need to be able to wirelessly print from my IMac, a Gateway desktop, a Dell laptop and a Toshiba laptop.

connecting Wireless to HP j6480 printer
Problem is when I go to menu and press wireless network printer option. It’s just press menu then use the arrow keys on each side of the OK button. Then press down to Wireless Network Wizard. Press the OK button. I think the Wireless Network Wizard is the third option down when you are in the Wizard. It will then ask you for the wep for your router. I have the Verizon Jet pack from Verizon. But I assume you could use any router. My router wep was all numbers for example 99000627xxxxx all numbers. I tried and tried and kept putting in the wep but it kept coming back wrong wep code. What I did not watch was the numbers I was putting in were wrong. For example when I was putting in 990000627XXXXX that was not being put in. What was being put in was something like ypt$&^ etc. I did not know when you were putting in the numbers you had to keep pushing on the 9 key until a nine came up, then it would go to the next number you had to put in. You had to do the same for the second, third, fourth and etc until you entered all of the code. Then the wireless router connected. Why does someone not tell you that.

7520 all in one will not print photos from photo tray from computer

7520 all in one printer photodmart will not print photos from computer from the photo tray

Hi,
By default it picks main tray, you have to tell it to pick papers from photo tray:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

7520 All In One not scanning from computer

I have a 7520 all in one printer. I can scan from the printer to my computer with no problems, I can print from my computer with no problems. I have always been able to control scanning from my computer when I put a picture on the printer without any issues. The HP Photosmart icon on my desktop is there but I cannot open it. I've tried opening it from the Start Menu and I still can't open it. Now I've tried going to the HP Solutions Center and when I click on that it says it cannot run b/c installation is not complete. (I've had this printer for a almost a year and this just happened out of the blue.)
I uninstalled the printer then reinstalled it again. I unplugged my printer and my wireless router and retstarted both, all to no avail. My software is updated and I've run Scan Doctor and everything is in working order.
I simply cannot open HP Photosmart from my computer.

Hi @FinnGirl47,
Welcome to the HP Forums!
I understand that you cannot scan from the computer with your HP Photosmart 7520, and I am happy to help!
For further assistance, I will need to know: If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, also if the printer is able to make copies.
In the meantime, please try going through this scanning guide, A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning.
Thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 3520 All-in-One Printer Falls Out of Wireless Network Periodicially

We have an ongoing problem with our HP 3520 All-in-One Printer. We set it up for wireless printing and it works....for a while. Periodically, we find that it falls off the wireless network and will not print except when plugged into the USB cable. The problem is that my husband has an Ipad Air as his main device which he cannot plug into the printer and needs to have wireless working...and the main reason we bought this printer was to have wireless capability. We *think* that it may be falling off the network when we have a brief power outage or Internet outage, which happens occassionally for a short time. Also, on my laptop, although the wireless set-up to this printer has worked in the past, now I see that I can either connect my laptop to the Internet network OR the printer, but not both at the same time. How strange is that?
I have printed out the Wireless Network Test Results AND the HP Network Configuration Page, in case that information can be useful as we attempt to troubleshoot this problem.
Note that the printer is no longer under warranty.
I have reviewed numerous HP product support pages and feel as if I am running in circles. The help information is confusing to us and we have spent so many hours trying to troubleshoot this issue that my husband has completely given up on that printer and I am doing my best to try to save it since it is only about a year old.
We appreciate any help you can give us to remedy this ongoing problem.
PSCo

Hello there PSCo, Welcome to the Forums! I hope you enjoy your experience
I saw your post about your Deskjet 3520 dropping the network connection. It very well could happen if the power goes out or Internet disconnects. I have found a troubleshooting guide that is geared to help repair the wireless connection disconnecting. It will go further into detail about the causes and things to do to help.
I hope the steps work for you!
Printer Does Not Maintain Wireless Connection
Thanks for posting, enjoy the rest of your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
Error messages: None
Recent hardware or software changes made to the system: None
Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series). I don’t know how this all came about or why?
I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
Connection Method: Wireless
Diagnostic Summary
Troubleshooting performed: Yes
First Wireless Network Report:
Everything: Passed
Signal Strength: Excellent
Other networks detected matching your network name (SSID): No
Configuration Summary
Network Name: Correct
IP Address: Correct
Config Source: DHCP
Communication Mode: Infrastructure
Authentication Type: WPA-PSK
Encryption: Automatic (AES or TKIP)
Second Wireless Network Report:
Network Name: Was different
Of course that disrupted the whole report.

BH
Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
LH

Power problem with my 4620 all in one printer / scanner / fax

Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!

maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP 7520 all in one - scan to computer won't work

Hi there,
I was wondering if someone would be able to help me with a scanning issue. I use my HP 7520 wirelessly, and the printing works fine. I can scan to email and to a USB, but scanning to my computer won't work. It used to work, and stopped one day. I've tried shutting down the printer, computer, and router to re-start.
I also followed all of these directions:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
I have a Mac OSX 10.8 operating system. I tried un-installing and re-installing the software, nothing works. But the printer is connected to my wireless network. The only thing I couldn't do with those instructions is under the "check scan to computer setting" area, number 7. Whwn I open my print que and click on "settings", I don't have a utility tab. So there is no where for me to check the box "scan to computer". Is that the issue? Not sure why I don't see this on my computer. Thanks!

Hi clh283 and onespeedbiker,
I understand you aren't able to scan from the printer to the computer.
Thank you for your reply.
I will be happy to help you with this.
If you are missing the Utility tab then you won't have the option to enable the scan to computer.
What drivers did you install?
I would uninstall the printer. Uninstalling the Printer Software.
Follow these steps to repair Disk Permissions.
On the Apple menu bar, click Go, then click Utilities.
From the sub menu on the right, double-click Disk Utility .
From the list on the left, select your drive or active partition.
Click the First Aid tab, then click Verify then Repair Disk Permissions .
Restart your computer.
Then download and run the installation.
Here is the URL for the HP Photosmart 7520 e-All-in-One Printer Full Feature Software and Drivers - Mac OS X v10.6, v10.7 an...
I have provided a document for A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning. Steps for enabling the scan feature.
This information is for onespeedbiker since you are using Win XP.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Adobe Reader version 9 or higher for HP Photmart 7520 all in one

How can I tell if I have an Adobe Reader (version 9 or higher) on my 7520 HP all in one printer?

Hi,
It can print files from many versions. You can print from the latest Adobe reader. Is there any error ? What is it ? To find out out the Adoba reader version on your machine, please click Help and then About ....
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Power up problems on my HP 7520 all in one printer

Similar Messages

Maybe you are looking for