Power went out when iTunes update to 10.5.1 was installing. Now it's incomplete and I can't download tunes. What ca I do?
Power went out when iTunes update to my computer was installing. Now it says: "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I hit "check for Updates and it shows I have what's current. How can I fix this without losing all my songs?
In case you're running Windows, did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
iTunes has to contact Apple during the process of downloading and updating iOS software.
Similar Messages
-
I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen for too long, it zoomed and I can no longer see what's on it. I can not even unlock it. I can not use my iPad anymore. What shall I do?
Try double tapping with three fingers and see if that reduces the screen image. If it does, unlock the iPad and go to Settings>General>Accessibility>zoom>Off. If double tapping with three fingers doesn't work, try triple tapping the home button instead.
-
I updated my storage to 20gb however my phone still shows 5gb and i can not download the update. iOS8 How can I change the setting on my phone to 20gb.
You can't update on-device storage like that...you are probably referencing iCloud storage, which doesn't effect your on-board memory. Plug your phone in to iTunes and download the update that way...no deleting apps or anything...it's much easier.
-
24.3.0 caused errors in my message filters. Error messages occur when getting new mail that has a filter. Not sure why this happened, but would like an easy fix instead of deleting all and creating new filters. Tried edit option, but to no avail. Was going to try clearing log, but I'm just guessing. Can anyone help me out with this? Thanks.
I have run every version from 2 to 30 and the message filters have not been an issue in any of them. Perhaps if you restart from the help menu (Alt+H) > restart with add-ons disabled and see if an add-on is causing your issue.
-
When I try to play one of the games my ipod classic freezes and I can not do anything what do I do
Can anyone help as to either why my iPod freezes when I try to play the games or how to sort it out when it freezes
You could try to reset your iPod. Here is how:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
Source: http://support.apple.com/kb/HT1320 -
My new update to FF version 33 is installed LOCKED in full screen and I can not get to my desktop
I use a HDMI TV as a monitor. When I upgraded to ver 33.02(?), it locked in FULL SCREEN and my TV/Monitor is not adjustable so the option at the top "EXIT FULL SCREEN" is not showing or available and must be rolled off the top.
I can not find any way to get out of it in the new release 33.02(?) and now am using IE for this post as this full screen makes FF almost inoperable.
If necessary, I would be glad to permanently disable the full screen for FF as it is a real pain.
ThanksYou can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder) -
I've been having a lot of trouble with iTunes lately. When I would sync my iPod to iTunes, many of the most recent songs I had downloaded would be removed from my playlists and their respective play counts wouldn't be updated. I had thought that updating iTunes would fix my problems, but each time I tried to download the update, nothing would happen. The dialog box that gives you the option to open or run the program would not appear. Finally, after referring to the Apple Support Community, I was able to find a link to download iTunes that allowed me to do so. But when the download was complete and I attempted to run the program, a Windows error occurred that indicated iTunes was not a valid WIN application. It gave me no other option but to click "OK" and when I did, I lost the entire download. I hope that there is a way to fix this problem.
Thanks for reading.
KristenLet's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
I've tried everything in the help sections on the firefox website. I've tried on multiple occasions to get into the live chat to talk to someone, but its always either closed or I can't get anybody to respond.
Is this how you do it?
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
The power went out while installing the software update..!
The power went out while installing the new Apple TV software update..! Now the LED flashes all the time, shows the apple logo and never boots.
I've already tried to restart with no result. I bought the microUSB cable and iTunes recognized it. I restored the firmware with success but when i disconect the usb cable the AppleTV is dead. It doesn't respond (LED is off) when i connect the power or when i use the remote. Now the LED flashes only when i connect it with the microUSB cable. I tried several times to restore the firmware with success but when i disconnect the microUSB, AppleTV seems dead.
-
the power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!
bechosken wrote:
My friend wanted to get some music off my itunes
This is called "stealing". You do not have the legal right to give her the music you have in your iTunes library unless you are the copyright holder.
when syncing it it said she had to update her phone software first
That's not quite what it said. Someone should have paid more attention to the great big warning about the possibility of losing data if the phone wasn't backed up.
We cannot find her new photos. Please help and there was 100 new pics. Is there any way we can get them back. I already have the program Asoftech - but it doesnt seem to register the iphone only C and D drive. Please help!
It restored the backup that was made on your computer 6 months ago, which did not contain those photos. You're wasting your time trying to find them on the phone. They don't exist.
Hopefully, your friend syncs her phone to her own computer on a regular basis. She needs to plug her phone into her computer and restore it from her last backup. That will restore it to the state it was in when the backup was made.
She also needs to get in the habit of extracting the photos on a regular basis, like she would from any other digital camera. -
HT1551 apple tv was downloading update and power went out
Cant get the Apple tv to work, I was updateing the software and the power went out, now it won't work at all? any idea what to do ?
Mac App Store- How to resume interrupted downloads
-
The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password? I have an HP laptop.
Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
If this occurs, your only option is re-configure the device again, just as you did originally.
In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs. -
I WAS USING IPHOTO AND THE POWER WENT OUT. WHEN I TURNED IMAC BACK ON IPHOTO WOULD NOT OPEN, JUST KEPT ASKING TO RELAUNCH. NOTHING HAPPENS WHEN I RELAUNCH. I TRIED PUTTING THE RECOVERING DISCS IN BUT STILL WON'T OPEN!
It also broke your cap lock. You need to get your keyboard fixed as it makes reading your posts extremely difficult and is considered shouting which is rude
You need to load your back up or make a temp backup and rebuild your library
LN -
I can't get my Mac to turn on? Our power went out and it is now unresponsive.
I can't get my Mac to turn on? Our power went out and it is now unresponsive. I have tried the usual way to power it up but am not getting anything. Does it need to be reset?
Which Mac model?
When you say not getting anything - do you mean no sounds, beeps, etc?
It is possible that your Mac's motherboard or power supply are damaged.
Check this (read through the symptoms first):
http://support.apple.com/kb/HT3964 -
Power went out and now spinning ball of death
This morning the power went out while I had been working in InDesign and Illustrator. I came in and saved the project before the back up power went out but did not get the Mac powered off completely before the back up stopped. When the power came back on, I restarted the mac and Indesign, and my project is now constantly getting the spinning ball of death; I can't even recover it anymore in Indesign (I can open the file, but the recovery was lost). ALL other programs are fine. Just indesign.
I went to look for help online and found a recommendation to turn everything off, unplug mac, let it rest then hold the power button down and replug the power then power the mac back on, and now my fan is running at super high speed and I still am having huge problems with InDesign. 1) can you tell me how to get the fan back to the way it was and 2) what do I do about spinny rainbow ball in Indesign.
HELP!!!!!Welcome to the Apple Support Communities
For the fans issue, first reset the SMC > http://support.apple.com/kb/HT3964 If it doesn't work, it's possible that the computer has a hardware problem.
Apart from that, it's possible that your hard disk got damaged because of the power outage. To check if it's OK, open Disk Utility (it's in /Applications/Utilities), choose "Macintosh HD" in the sidebar and verify the disk. If it shows a problem, start in OS X Recovery (hold Command and R keys while your computer is starting), open Disk Utility and repair the Macintosh HD partition. If it couldn't be repaired, the hard disk has to be replaced
Maybe you are looking for
-
Hello, I'm trying to familiarise myself with the new Java features that project Tiger (Java 1.5) will introduce. I come from a C++ programming background. I very briefly studied enums whilst I learned C++ and never used them in my programs, so I was,
-
How to create a three state approval workflow in SharePoint 2013 using visual studio 2013
Hi Everyone, i have a requirement like 3 state to approve. Here is the details:- when the item added into the list it will go for reviewer. Once the reviewer review the item, he will assign the task to concern person/department(Parallel process more
-
Am I somehow able to have multiple screens in screens with iMovie?
-
I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pa
-
It occurs to me that 'stacks' are being used in two ways: * to organize sets of versions of the same shot * to organize sets of images thematically linked The first case seems to be the approach generally envisioned. In this situation it makes sense