Power wire connection problems and suggestions.

Greetings, I have noticed that the power wire that connects into an iPad plate is week, within couple month it reaps apart because of the way it is connected to the grabbing body of the plugin, I had to buy extra plug to connect my iPad, i guess that maybe this was reported from the other users of the product, I attaching the drawing of the plug.
https://www.iwork.com/r/?a=p1359871026&d=Plug_connection_problem_suggestion.page s. This is explanation drawing link
Thank you.

https://www.iwork.com/iw/p1359871026/.iWork/Share/Plug_connection_problem_sugges tion.pages/Resources/Plug_connection_problem_suggestion.pdf
This is drawing attachment PDF file.

Similar Messages

  • Unending connectivity problems -- and Desktop Help...

    I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well. 
    BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
    The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
    But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
    This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
    1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub  is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
    2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
    3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
    4) Connection dies. So much for Microsoft Fix It.
    5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
    6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation  has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a  Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
    file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
     Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
    7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
    Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
    Summary: I seem to be being simultaneously hit with one issue after another.
    I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
    Above all though: I'm  really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
    If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
    Thanks.

    Thanks again to John and gg30340. Here's an update:
    1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
    2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
    3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
    4) Hub reset to factory fresh, according to BT guide.
    5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
    6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
    7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
    8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
    9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
    I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
    Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in  what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .

  • TS1538 my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

    my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • N95 8BG "WiFi Connection problems" and "Web: no ga...

    Like many users, I could not get my new Nokia (N95 8GB) to work with my WiFi. After many attempts, using the various ideas posted, I came up with a solution that works reliably for me.
    First lets deal with "WiFi Connection problems"
    Menu/Tools/Settings/Connection/Wireless LAN
    'Show WLAN availability' = 'Yes'
    'Scan for networks' = 'Every 5 minutes'
    Some users have suggested choosing 'Advanced Settings' from the 'Options' menu, changing 'Automatic configuration' to 'Disabled' and the either setting 'RTS threshold' to '2346', or setting 'Power saving' to 'Disabled'. I tried both of these but they did not make any difference in my case. However they may make a difference for you, hence their inclusion here.
    Menu/Tools/Settings/Connection/Access Points
    Choose 'New access point' from the 'Options' menu
    'Data bearer' = 'Wireless LAN'
    'WLAN network name' = If your network is set to broadcast its SSID, use 'Search for networks' then select your network from the list, otherwise use 'Enter manually' and type in the SSID.
    'Connection name' = anything you like, but I use the SSID
    'Network status' = not sure about this maybe someone can confirm, but I think if the SSID is broadcast then it is 'public', otherwise it is 'private'.
    'WLAN network mode' = match this to your access point configuration. Mine is set to 'Infrastructure', so I do not cover the ad-hoc scenario here.
    'WLAN security mode' = again I am using WEP so have not covered other scenarios.
    'WLAN security settings' = these should match you access point configuration.
    'Homepage' = whatever you like. I use 'http://www.google.co.uk', just so that when I start browsing I get something reliable, useful, and dependable. If Google fails to appear it usually means there is something wrong with your config.
    Now lets handle the dreaded "Web: no gateway reply"
    Menu/Tools/Settings/Connection/Access Points
    Scroll down to highlight the new access point and choose 'Edit' from the 'Options' menu. Now choose 'Advanced settings' from the 'Options' menu.
    Assuming you network used IPv4, which most do in my experience, select 'IPv4 settings'. I don't know about IPv6, and don't use a proxy so these are not covered.
    The values you enter in 'IPv4 settings', depend upon your network/router settings, and whether you have a DHCP server or not.
    Assume your a router IP Address, on the LAN side, is 192.168.0.1, and that it has a DHCP server set to serve addresses in the range 192.168.0.64 to 192.168.0.192, using subnet 255,255,255,0. Since the mobile does not seem able to get an IP Address from the DHCP server we give it a static address 192.168.0.55. Notice this is outside the range sereved by te DHCP server to avoid conflicts.
    We end up with:
    'Phone IP address = '192.168.0.55'
    'Subnet mask' = '255,255,255,0'
    'Default gateway' = '192.168.0.1'
    'DNS address' = 'user defined'
    'Primary DNS address' = '192.168.0.1'
    'Secondary DNS address' = '0.0.0.0'
    I used something similar and was at last able to browse the web via wifi.
    I hope all of the above helps someone out there.

    I have just experienced this problem having been using the WiFi network for months without problems. I tries all the suggestions on these forums including the power settings, turning off WEP, and the fixed IP suggestion and none worked. I even reinstalled the firmware and reconfigured everything. It turned out to be the router. I had rebooted it several times to no effect but the DHCP always gave the N95 the same IP address lease. So I changed the range of IP addresses the DHCP could lease and restarted the N95. It got a new IP and was back working again.
    If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it.
    -- W.C. Fields

  • Some wire connection problem for SCB-68 usage in measuring voltage

    I am using FPGA 7831R along with SCB-68 to measure some voltage from my monitor terminal from my motor. When I measure the voltage between the monotor output and GND using a multi-meter the measurement is very reasonable and it can be changed when motor speed is changed. However, When I use FPGA input function to measure the monitor output(corresponding AI0 on SCB-68), the number displayed on the scope is always 10. The displayed value from GND is also 10(corresponding AI1 on SCB-68), so when I substract  AI0 from AI1 the value is zero. Did I do something wrong in wire connection.
    Should I connect the AIGND terminal to somewhere or leaving it floating.

    Hi shuishen1983,
    What are the connections that you have made for this measurement?  What kind of signal is it?  Are you trying to do a differential or single-ended measurement?  In either case, you should have a look at this wiring guide.
    Jared S.
    Applications Engineering
    National Instruments

  • SPP 4.4 on DB2 connection problems and missing documentation

    HI all,
    i'm trying to install a SPP server using DB2 version 9.7.4 but i'm having a lot of connection problems.
    It seems that we are missing some "addendum documentation" on this kind of cofiguration.
    Anyone has this kind of doc?
    Thx
    Enrico

    Hi Enrico,
    Have you tried the ANCILE Product Support Center at http://products.ancile.com?
    Please read through and answer the following questions, as well as being informative to me they may also point you in direction to location of this problem.
    May I know the RWD/OS/DB version?
    Are the server/client located in different location?
    Do you have connection problem between server and client?
    Have you tried to restart the related service and test again?
    Do you have the same problem before or it just happend recently?
    Does the problem happen only on some client machine?
    Does the problem happen only for some document?
    Can you please do the following:
    1. Start uPerform Client software.
    2. On the problem computer, go to Tools > Options in uPerform Client
    3.  In the #General# section, ensure that the Logging levels (Log and
    Publishing) are set to #Debug# by using the drop-down option:
    4. IMPORTANT: Recreate the steps that lead to the issue with your
    uPerform document.
    5. To create the Sysinfo log file, Select Help > About
    Hope this helps,
    Kind Regards,
    Matthew

  • Bridge 1310 wire connection problem?

    We have implemented new cisco 1310 bridges (2 root bridge/13 non-root bridge). And connectivity and reachability between bridges is OK, but the issue that
    1.when you try to access the root bridge it is hang for some time especially when you access through web interface,and when you access by web you lose connection (drop packets ping).
    2. when you try to create browse through web, the bridge go hang again.
    -Already I've upgraded all bridges image to "c1310-k9w7-tar.123-7.JA5", and problem was resolved for some time but now it is again appears.
    3. when you try to connect to non-root bridge is smothly acceable and no connection issues, and already end users are working fine.
    Anyone experinced such an issue or can help on figure out??

    How long are the cables?  Maybe they have bad connections now.  Replace them.

  • Outlook 2010 IMAP connection problem and not work with TLS enabled

    Dear all,
    Need your help.  5 users of my customer Outlook 2010 suddenly popped error message "Your IMAP server closed the connection".  We checked that there is no problem in IMAP connection in Exchange 2007 server (SP3) (we tested with setup new
    account in another Outlook and able to connect, send and receive email).  
    We are able to workaround the problem of that 5 users by disabling TLS in account setting for SMTP to Exchange.  The users can then connect and able to send and receive. (however, in our testing above, there is no problem with TLS).
    Could you help to enlighten me what may be the cause of this situation?  
    Best Regards,
    Rayson Wong 

    Hi,
    Please click File > Account Settings > Account Settings > Select the IMAP account and click
    Change > More Settings button > Advanced tab, and then adjust the
    Server Timeouts slider bar to a longer time to check the result.
    Also make sure the SMTP server port number is set correctly.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support

  • Hp slate 6 heating problem, network connectivity problem and now camera problem

    Hello, I have using this tablet since last 4 month and after upgrading to kitkat there is phone heating problem and network connectivity problem getting started some time it will show network but during that we can not receiving or calling through it and even after put in flite mode it will not resume so have to restart several time. Now about 4 days ago kernal updating automaticaly in my phone so i happy that may shortout the all problems but rather than it will added one more problem which related to camera while goes in setting of camera it will automatically closed. Have you tested this tablet or not ???? and why from your site any actions has been taken ???Why there is no Solutions are given from your site????  

    Hello Rohit,Can you check if you updated to the latest version?Here is the link: (you can choose the latest version to download and update it by SD card)- base on your regionhttp://support.hp.com/us-en/drivers/selfservice/HP-Slate-6-VoiceTab/6818329/model/7386537

  • Thinkpad T61 wireless access connection problem and heat problem

    My laptop keeps heating up ALOT i've been using tpfancontrol to make my fan go really fast and to cool it down. Anyone have a clue what to do about that? It automatically sets itself to smart (fan control config). Also my access connections has been working really bad lately. It won't connect anywhere. When i press fn+f5 and click on the network i want to connect to it would show connection successful and say applying wireless settings with a x next to it. Anyone know what to do about this?! cause i installed and uninstalled and nothing is working =[. Newest access connections and updated wireless drivers. Wireless zero connection is working fine though.
    Wireless Card: Intel 4965 AGN
    Windows xp pro sp3
    Any help would be great.
    Message Edited by wwilsonxp on 01-26-2009 10:08 AM
    Solved!
    Go to Solution.

    mind parameter ManModeExit (set to 72 degrees Centigrade in common .ini and 80 if not set by .ini) in TPFanControl.ini:
    // Program exits manual mode and switches to smart mode with last chosen
    // profile, if this temp (degrees Centigrade or Fahrenheit) is achieved.
    // default= 80 degrees Centigrade / 176 degrees Fahrenheit.
    ManModeExit=72     //ManModeExit=162   Fahrenheit
    ...and switch off any power saving mode of wlan device.
    Message Edited by troubadix on 01-27-2009 12:33 AM

  • VSM - VEM Connection Problems and Failure to remove VEM or readd to ESXi

    Hello
    I have many questions to help with
    as I have Nexus 1000V on an ESXi2 and was trying to add ESXi1 to
    all ports were showing down
    so after checking configuration on ESXi's , they both show the old ip of Nexus while i set a new ip in different range but with no luck , unable to make Connection operational and ports of ESXi1 when trying to add showing as administrativly blocked even they are not blocked from physical side
    1) Is there a way to change that IP manually on ESXi itself ? what about the Gateway ?
    2) I was trying to check removinf VEM and reinstalling the vib file but settings are back even after running swap scipt ! I dont know why !! I install successfully but fail to add and migrate ports because old configuration is still showing
    what is the correct way to totally remove the vem and its related configuration ? ( please include a detailed procedure )
    3)Can I have 2 IPs for management in same range ( one on Standard Switch and Second on the Nexus ) and communicate with other Standard Switch for other ESXi with same range ( and VLAN ) ?
    4) how to use VUM to sync configuration or deployment of VEM ?
    5) Wht does it mean if on Graphical you see wrong version for VSM ? what is that related to ? plugin ? how to repair that ?
    appreciate your help in advance
    Thanks

    Hello Sami,
    To start with, we need to understand your setup.
    Please provide output of following commands from
    ESXi host
    vmware -v
    esxcfg-nics -l
    esxcfg-vswitch -l
    vem status -v
    VSM
    show version
    show svs domain
    show svs nei
    show svs connection
    Padma

  • Power supply connection problems

    I have an HP Compaq 6715b and have gone through several power supplies - it does not take long before I lose connection between the male/female connection. I try to be gentle but this keeps happening, what is the problem? Is there a problem at the female end (inside the computer)? Would a docking station solve the problem? It seems to be an expensive solution jjust to get power.
    Thanks
    Greg

    What is rating of the AC Adapter you got?
    Based on the specification, you should be using a 90W AC Adapter such as 463955-001.
    If you were using a 65W AC Adapter, then it is likely the 65W AC Adapter were running too hot and in turn cut down the life expectancy of this 65W AC Adapter.
    If you were using a 90W AC Adapter, I think you are just unlucky to get some of the bad units.
    Yes. A Docking will help. It is because it uses a 135W AC Adapter to the docking station and your laptop will get power via the docking connector at the bottom of your notebook.
    However, there are so many type of HP docking stations and you need to make sure to order one for your notebook.

  • Airport Extreme, 5Ghz connectivity problems and poor media streaming

    Hi,
    I purchased an extreme from the apple store a little over a week ago, and before I send the device back I would like to solicit recommendations from this forum.
    Some information about the setup:
    - Single airport extreme (supplying wifi services for my non-wifi DSL router and a connected USB disk)
    - Airport Extreme Firmware: 7.4.2
    - iTunes: 9.0
    - OS: Snow Leopard (10.6.1), Leopard (10.5.8), Window Vista.
    - Harddrive: 2TB lacie, USB2.0 connection only
    - 2.4 and 5 Ghz broadcasting mode
    - The device is broadcasting on all supported protocols.
    - Multiple clients (various: apple, microsoft, fujitsu)
    - Small space, no major concrete/brick/stone walls, signal strength is 5 bars of goodness
    - Country: Spain (I know there were 5Ghz restrictions here a while ago, but the device broadcasts on 5Ghz and is therefore not crippled).
    If anything else could be of use, let me know and I'll update this list.
    And now the problems:
    1) 5Ghz connections fail
    When connecting over the 5Ghz freq my connectivity to the extreme and the services it is offering (internet, disk sharing) is intermittent, at best. Basically, it has not worked reliably since I took it out of the box. This is equal for both of my macbooks and a fujitsu laptop (all with n support).
    I've tried switching channels to avoid congestion - I don't live in a wifi-heavy area, and there are no other likely sources of interference (e.g. microwaves, cordless phones).
    My connections to mounted disks come and go, I have to re-authenticate, and so on.
    A general scan of the environment with KisMac does not show any major interference from other wifi networks (only 2 others in range, one is wimax).
    I've tried to do some wifi analysis to see if I can spot any frame/packet related issues. Some rudimentary analysis indicates that when the connection stops working on the 5Ghz channel my laptop continually sends request-to-send packets to the extreme, but does not receive a clear-to-send. This occurs after a-few-seconds to a-couple-of-minutes of connectivity - the connection initially 'works' (i.e. wifi packets are sent/received correctly and I can access the internet).
    2) Data access and media streaming from the connected USB drive is very poor
    I've mostly had problems with itunes. I thought this might be related to the size of my library, but this shouldn't effect single track playing. Even enabling large buffering in itunes results in intermittent pauses and long track loading.
    Note: this occurs over b/g connections; as stated already, n connections don't work. iTunes simply goes into a coma for while and then eventually fails. See above. Also, if I just stream from my macbook (i.e. HD connected via USB), it works flawlessly.
    The extreme was running 7.4.2 - updated on first connection. It's now running 7.4.1, as I read on the forums that there were some perceived problems with 7.4.2 (although these perceptions may not be accurate.
    Concl(f)usion:
    I believe I've ruled out the following:
    - Distance
    - Interference
    - Laptop related issues (the same problem occurs with 2 macbooks and a fujitsu laptop).
    - Latest firmware
    - Software (apps, OS, etc)
    Which leaves me to ponder two possibilities:
    a) The extreme is damaged.
    b) The extreme is not a good product (surely this can't be so?!)
    There is, of course, a c-possibility ... that the collective experience of the online community might be able to offer me an alternative path?
    I would be very grateful if anyone could offer any suggestions, tips, tricks, spells or simply a hug before I contact apple to begin the process of explaining the issues and seeking some care.
    Many thanks in advance,
    Dave.

    I have had the same problem. Really frusrtating, expecially since the reason I bought the airport was because of all the wireless congestion in my neigborhood with only 11 channels on the 2.4 GHz spectrum.
    Bought my airport dual band about a week ago. It had the firware 7.4.2. After extensive searching, I found other with similar issues. Apparently the last stable firmware may be 7.3.8. I am on 7.4.0 and not having any issues any longer (only testing one day now).
    This may solve your issue. Login to your airport and choose manual setup. on the summary page, find 'Version' 7.x" and click on the word 'version'. This will allow you to rollback your firmware. I went with 7.4. Depending on what options you need with airdisk, Time Capsule, rolling back may remove those options, so experiment. You can always go back to 7.4.1 or 7.4.2 from within the interface.
    Hope this helps.

  • E2500 hard wire connection problem

    I know little about network connections so please bear with me.
    We use a Linksys E2500 connected to a DSL router.
    The E2500 supplies the wireless network to all of our devices in our house.
    The wireless doesn't give me a very good connection in my office, which is in another building on our property, so I want to run hard wire (Cat5E) to my office and plug it directly into one of the four ports on the E2500.
    I tested this by running a short Cat5 jumper cable from my Dell laptop to port 2 on the E2400
    When I select "Broadband Connection" instead of wireless connection on my laptop it prompts me tI enter my username and password (I do) and after my laptop tries to connect I get an error that says:  "Error 651:  The modem (or other connecting device) has reported an error" and does not connect to the internet.
    Any suggestions?
    Thanks

    Turn off your wireless adapter in the laptop.  Now plug in your cable.  Should connect just fine.

  • Ipod wifi connecting problem and slowing down like it has a virus need help asap

    my father bought me aND IPOD and i gave to him to to fix his wifi on it and he had an wifi lock so it went off at 11 and it kept getting earlier and earlier and now i left his house and tried to connect to my grandmothers wifi and its been slowing down and acting funny here lately and now it wont connect at all to her wifi. he has done something like that before to my sisters ipod and i cant connect to wifi and need to no how to work this problem outwithout losing all of my stuff music etc. . what should i do

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

Maybe you are looking for