Powerbook 12" 1.33 batteries are the available?
Need to replace the battery on a 12"powerbook 1.33 logic board.running 10.6 -as close to apple original.
John
Apple no longer sells them and neitehr does one of the best after-market vendors, OWC.
I found this:
http://www.global-batteries.com/product_info.php/cPath/1_12/products_id/10566
on a site from which I purchased two G3 Wallstreet batteries for a friend. Both worked as well as the original Apple batteries. However, that firm sources from different manufacturers so there is no way of knowing if their offering for the PB12 is as good as their G3 Wallstreet batteries without doing the "buy-and try" thing.
Similar Messages
-
What are the available software and apps for ipod nano
what are the available software and apps for ipod nano
saif78 wrote:
what are the available software and apps for ipod nano
Sorry, but Apps are not compatible with the iPod and there is no additional software available for it.
B-rock -
How to schedule a load job from bi to r3 daily ? What are the available opt
I think we can create a PC for the same so should we code an ABAP routine with include to do the process. So can it be scheduled daily, what are the other option in BI7 other than PC ?
Hi Manohar,
To make the data source Real-Time enabled you need to run a small program which updates the REALTIME flag in ROOSOURCE table. Program is as below.
report z_rda_flag.
tables : roosource.
parameters : p_oltpsr like roosource-oltpsource.
update roosource set realtime = 'X'
where oltpsource = p_oltpsr
and objvers = 'A'.
Enter the data source name in the selection screen and run the program.
Now go back to SE16 and see the contents of 0FI_GL_4 inROOSOURCE.
You can see that the program has updated REALTIME flag for the datasource 0FI_GL_4.
hope this answer solves ur issue
u can do this only for an ODs and not for a cube. will let u know if there are any other options for a cube.
assign values to the answers as its the way of thanking in SDN.
regards,
Ranjith -
What are the available extract structure
hi all
i have to generate a report for sales . i want to know what are the extract structure for sales.
and also let me know what are the standard cube for sales.
and how can i find them.
thanks in advanceYou question is too generic it would better if you can precise
Check in R/3 - LBWE - > LO Cokpit you can expand nodes for SD to see their Extract structures
Sales -Application 11
Shipping - 12
Billing - 13
Refer help
http://help.sap.com/saphelp_nw04/helpdata/en/71/1769372b2b7d20e10000009b38f842/frameset.htm -
After my hard drive has been changed at the Apple Store today (it had corrupted files and didn't work anymore), the battery of my MacBook Pro (13 Inch, Mid 2009, HDD 160GB OSX 10.5) doesn't charge anymore. It shows the "X" in the battery symbol and says "no batteries available". The System Profiler says that the battery is not installed. How can I install it? Any help/advice? I am traveling for three hours from tomorrow morning... Would be great if anybody has quick advice on how to solve this problem myself as I won't be able to go to an Apple Store for the next three weeks. Thanks a lot!
Outside of contacting Apple there's not a whole lot that you can do unless you open the computer up yourself to try and diagnose and fix it which would void your warranty, as the battery and other components (other than the memory and the hard disk) are not user-servicable parts.
-
I'm trying to print 5X& envelopes. In pages, the templates are all standard sized. How do I create a 5x7 envelope template so I can merge my addresses?
I presume you are using the Pages application, is that correct?
So start off by launching Pages and choose one of the regular envelope styles. Traditional works well for me.
Next go to the File menu and select Page setup. From the menu that says Paper Size select Manage Custom Sizes. In the resulting dialog, there should be a button on the left labeled "+". Click it. In the Paper Size area, select Width 5 in and Height 7 in. Name the size (where it says "untitled" something descriptive like "5 x 7 envelope". Click the OK button. The Paper Size menu here should now say the description you gave it. Click OK again. Your work area should now be a 5 x 7 envelope.
Best of luck.
PS If you are using Word or some other program, the process is probably the same or very similar. -
2008 MacBook - Are the batteries the same in the black and white models?
Hi all,
I am looking at picking up a black 2008 2.4GHz MacBook (on the cheap) with a crook battery and super drive. I have another super drive so that is not an issue, but I am wondering if the batteries are the same as the white 2008 models. I have a couple of white batteries from the 2008 models that still have some life in them. Will they fit the BlackBook?
Many thanks in advance
SRIf you have a MacBook with the removable battery you can get a new third party battery fairly cheap on eBay.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from Apple http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY -
What are the avlble methods to Measure Quality of Customer Service in SAP
Hi
We are in Retail business, and I would like to know what are the available methods to measure the Quality of Customer service in SAP CRM. Help us to get the required information?
Best regardsVenkat,
there are two aspects to this :
1. The overall philosophy ( for want of a better word ) of QOS for any service - there is a lot of thought that has gone into measuring QOS for a service - hence I would say that QOS is more related to the specific service than the entire domain.
2. Measuring the quality of service in terms of what ? - there are a lot of KPIs for the same some of them could be :
Average time taken to service a customer
Does the customer get all that they want in the store or only some of the items ( partial fill)
Are the products neatly arranged and easy to access
average time taken for the customer to get what h/she needs
customer facilities like parking / childern play area etc
Availability of attendants / helpers for the customer
home delivery
credit options... etc etc and the list could go on endlessly ... as you can see it is very specific to the service being provided and accordingly you will get KPIs for the same.
As for measauring the same - there are umpteen ways to do the samedepending on the place it gets recorded - you can have surveys / web surveys / POS details etc etc - what is it that you are looking for specifically ?
Arun
Hope it helps....
Message was edited by:
Arun Varadarajan -
Hi,
Can i know what are badis exits for MM01/MM02/MM03.Can i know the procedure how to search badis.This are the available badis and exits for this t.code:
Enhancement/ Business Add-in Description
Enhancement
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Business Add-in
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
o.of Exits: 3
o.of BADis: 11
Find the Exact exits and badis for ur requirement.
How to fine the exact badi:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any
transaction
Regards -
Where are the prices for edge animate?
Trying to find it on the adobe website is like looking for the proverbial needle in a haystack. I just want to know if a monthly subscription is available, if so how much and whether there is an outright purchase option. Thanks.
Here are the available plans - Creative Cloud pricing and membership plans | Adobe Creative Cloud
Darrell -
I need to know what are the available course materials for the following MCP exam.Thanks
Developing Microsoft Azure Solutions (beta)
Dileepa S. Rajapaksa
Trainee Developer
Microsoft, Sri Lanka
Twitter : @dsrajapaksa
Blog : http://www.dileepatech.nethi,
here just one MOC course listed:
https://www.microsoft.com/learning/en-us/exam-70-532.aspx
MOC 20532:
https://www.microsoft.com/learning/en-us/Course.aspx?ID=20532A
regards
Thomas -
Are the generic batteries sold on eBay safe?
My battery isn't dead, but the battery icon says "Replace Soon" on it, and my battery has bloated a little(I understand this to be normal of macbook batteries that are dying, is that correct?). Apple brand batteries cost around $100, but on eBay, you can find all kinds of generic macbook batteries sold by third-party companies like Poker Bridge, Zhaoyu, Cnbatteries, Electriczone, emmasilmon, AdapterMonster, Hootoodeals, notebookcompany, etc, for $33-34. I just want to know if these batteries are safe, will hold a charge for a decent period of time, will last, etc, or if they are so much cheaper for a reason. Is it ok to go with one of them or am I better off shelling out the cash for the Apple battery?
Jon R wrote:
my battery has bloated a little(I understand this to be normal of macbook batteries that are dying, is that correct?).
I've burned through a number of them and have never seen one bloated.
I just want to know if these batteries are safe, will hold a charge for a decent period of time, will last, etc, or if they are so much cheaper for a reason.
Why don't you just buy one of these batteries from a local store like Target, Best Buy, Micro Center, etc. It's OK. I'll wait....
Is it ok to go with one of them or am I better off shelling out the cash for the Apple battery?
I don't like to take chances with anything involving power. I would also never buy anything that was only available on eBay. -
What are the standard Solutions available for Complaints Management in CRM?
Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin -
New DSO data fields are not available for transformations in the upwardflow
Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
KannanWe created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.
-
I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?
Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option
Maybe you are looking for
-
The easiest way to put a YouTube video in iWeb...
Whew! I am so stinkin' proud of myself. Now this tip isn't for you techno gurus out there. This is for the person who is as clueless about half the files on their computer as I am. I have a blog. I tried to use iWebMore...I've tried iWebEnhancer...et
-
An error occured in communication with the BW server.--urgent
Hi all, Can anybody help me. i got 1 issue like ,when iam trying to executing query, iam getting the error pop up screen like 'An error occured in communication with BW server' 'Due to this ,the Connection Has To be Closed'. Detailed Description: 1
-
Unexpected behavior of Foreach Loop in SSIS 2012
I have come across the unexpected behavior of Foreach Loop in SSIS 2012. While testing package for invalid folder (path asdf:\Vishal_Work does not exists in this case) for source files. I observed that the control does not enters into Foreach Loop,
-
ITunes on new computer not reading MP3 tags
I have transferred my library of MP3 that were ripped from CD from my old computer to my new computer, and many of the files do not show the album name or artwork, etc. in iTunes. If I look at file properties in Windows, however, all the information
-
I have looked at the default Automator actions that Apple has provided to us. On the following site 12 Actions are listed. However when looking at Automator I only see 9 actions. http://www.automator.us/aperture/ Apple provides developers with Xtools