PowerBook 12" Battery - best practice...?

Hi guys,
I am about to order a new PowerBook 12" battery from Apple, and would like some best practice pointers to keep this one running well for as long as possible. My current one lasted nearly 4 and a half years...and now depletes within a few minutes.
So...should I initially charge it for a certain time? Not use it for the first charge? How about subsequent charges? OK to use plugged into an outlet while the battery has full charge?
Any and all pointers would be greatly appreciated.

Hi, Zak. Read the links I posted here. They will tell you everything you need to know and more.

Similar Messages

  • Battery Best Practices

    I just bought a new battery, and want to make sure I'm treating it right. What is your advice regarding best practices for using the battery? Because of how I work, I usually keep the computer plugged in for most of the time, sometimes days on end. I gather this is not the best, and it can be good to use the battery now and then. I also understand: keep cycles to a minimum. Otherwise, what are the standard guidelines to go by? What works best for you (pro and longtime mac users especially)? Thanks for your help!

    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    Determining Battery Cycle Count
    Calibrating your computer's battery for best performance
    Battery University

  • Battery best practice Yoga Pro 3

    I use my YP3 at home and only need the battery to travel from room to room for a few hours at a time. Easy to keep it plugged in and charging at my primary use site. So any recommendations about best battery practice:
    1) Conservation mode and just keep it plugged in most of the time
    2) Normal mode and let it cycle charged to uncharged over and over.
    Solved!
    Go to Solution.

    Dear Slewp
    Welcome in lenovo community .
    We do highly recommend the first option for you if you prefer such usage .
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPhone Best Practices - A Work In Progress

    Hello all. I've been tasked with introducing my coworkers into the inner workings of the iPhone, and there are a good number of pointers that I find myself saying over and over again. I'd like to share my best practices with everyone, as well as collect more pointers and opinions from the community at large.
    Care and Handling:
    First - wash your hands, often. Now I know we all do this often anyway, but I'd like to point out that a healthy amount of hand washing will really go a long way to keep your iPhone screen smudge free. The worst offender, unfortunately, is doughnuts. A small layer of sugar will render that area un-tappable, without any real indication that it has done so. If you are frantically tapping the screen on the iPod button and nothing is happening, clean your phone before you do a hard reset.
    Second - Pockets. Keeping your phone in your front pocket is natural and what most of us do. In these summer months, however, keeping your phone in a sweaty front pocket can do a good deal to the dirt level of the screen. If you find yourself cleaning your phone constantly, try a belt clip.
    Lastly - Battery Life. Your iPhone's battery life is in your hands, literally. Being aware of your power consumption and planning accordingly is going to be infinitely more important that the battery's native charge-holding ability. This goes especially for the day of purchase - as tempting as it may be to open the box and activate, immediately running around the house watching YouTube, it is best to let the phone charge for 12 hours before use. Charging the phone every night is an absolute must, skipping a day will kill the battery life as your ride the bottom edge the following day. Most of us have access to a USB port while we're at work, best idea will be to plug in your phone when you sit down at your desk.
    iPod:
    Large Libraries: In the opening weekend, I got many complaints that you cannot manually manage your music. There is a workaround that has made me change the way I work with all of my iPods: the iPhone specific playlist. Simply create a playlist with all of the music you wish to put on your phone and sync that one playlist. This also helps with sync time - you have a start sync and an end sync, not a constant sync all throughout your music management, slowing your computer down in the process.
    TV Shows: I watch a lot of MST3K, which I have organized into iTunes as TV shows, split into seasons, the works. The problem that has arisen, therefore, is the one of selective synchronization - you cannot specifically select the TV show you want to sync to the device, instead getting the choices to sync all, unwatched, or latest shows. This is problematic when each show is 700MB large. Here's the work around - select all of the episodes of a specific show and right click, selecting "Mark as Not New", removing all of the little blue dots from the episodes. Select the one, three, or five episodes, and right click them, selecting "Mark as New", then sync the last one, three, or five unwatched episodes. The shows you selected will sync.
    iPhoto:
    Many users are complaining that iPhoto opens whenever the phone is connected. This is not a preference of the phone, but rather iPhoto. Remember when you first launched iPhoto and it asked you if you wanted to use iPhoto whenever your camera was attached? iPhoto is detecting that your phone is a camera and launching, just as you told it to do.
    Mail:
    POP accounts - too many unread messages: When first adding a POP account, all of the messages downloaded to the phone arrive as unread. Tapping a message, tapping back, and then tapping the next message can get tedious. Here's the workaround - tap the small down arrow to the upper right hand side of the screen, watching closely to the number next to Inbox. When that number goes down by one, tap the arrow again. If that number hasn't gone down yet, wait a sec, and do not try to tap tap tap tap tap, you'll flood the input queue and crash Mail.
    Syncing Mail accounts - All too often people blame the iPhone when their mail does not work. A perfect test is sync you accounts from Mail. If they work in mail, they'll work on the phone, if they are unreliable in Mail, they will also be unreliable on the phone. The Mail client on the iPhone is just as powerful as any other mail client in terms of how it connects to mail servers, if you are having problems you need to check your settings before blaming the hardware. If you prefer to leave your install of Mail.app alone, create a new user account on your Mac, set up all of the accounts you want there, and use iTunes to sync that data to the phone. Make sure to remove that portion of sync from your actual user account's instance of iTunes, however, or it will all sync back.
    This message has not been downloaded from the server: This message has snagged a couple users, but upon investigation, these users have filled their iPhones to the absolute brim with music and video. It hasn't been downloaded from the server because there is no space to download to - this also applies to the Camera application dumping to the Home screen. Because there is no space, it can't add any new data. Make some room, then be patient as the mail client gets to that message in cleanup (often a sync or reboot will clear it up).
    Safari:
    Safari and iPod: Many users have reported iPod stopping in the middle of browsing, often pouting and pursing their lips crying, "This is terrible, I can't even browse the web and listen to music at the same time?". I then check their phone, and lo and behold they have upwards of eight separate pages open at the same time. This device (like every other computer out there) has a finite amount of memory, each page taking up a significant portion depending on how busy the page is. I've routinely gotten through entire albums while browsing through Safari, but I've got one page open in total, and it's usually mostly text. Keep it to one or two pages open and iPod will run forever if you let it.
    Web Apps: "This web app is terrible, it keeps booting me to Home!" When was your last reboot? How many other pages are open? In the same vein as Safari and iPod, Web Apps need a good deal of breathing room - give it to them. Close down other pages, stop iPod, or even reboot. Give the app a clean slate and it will perform, every time. iPhoneRemote users will attest to this.
    iCal:
    Multiple Calendars - Default Calendar: When adding a new appointment, it adds to the default calendar. Appointments can't be shunted to the correct calendar until after sync anyway, so create an "iPhone" calendar and make that the default. Because it's in that calendar, you'll know enough to move it to the appropriate calendar after sync.
    Please feel free to add your own best practices, and ask questions, too.

    is there any application you can get for the iphone to enlarge text and phone numbers ?
    If included with an email or on a website, yes with no application needed.
    If you are referring to the text size for your iPhone's contact list, no.
    can you insert a phone number from your contact list into a text message ?
    No.
    i cant seem to figure it out, does the alarm clock work if you turn off the phone at night,
    No - powered off with the iPhone means powered off. Any phone that provides for this is not powered off - it is in deep sleep or deep standby mode, which the iPhone does not support. If you don't want your phone ringing or don't want to receive SMS at night but you want to use the iPhone's alarm feature as a wake-up alarm, you can turn on Airplane Mode before going to bed, which will also conserve the battery if your iPhone is not plugged in at night.
    can you send a multi media text message ?
    No.

  • What's 'best-practice' with external hard drives?

    Hello folks,
    I just got myself a 500GB LaCie d2 'Quadra' hard drive, and it works great - just as I was led to expect. Now I've connected it to my iMac with a FW400 cable. I've a few questions regarding general usage and 'best practice' when using an external hard drive like this:
    1. Do I need to disconnect it (pull out the cable from my iMac) every time I Shutdown - and reconnect on Startup? Or can I leave it it and pretty much just forget about it?
    2. Can I turn it 'on' and 'off' any number of times (using the on/off switch on the back) when working on the iMac? I might like to switch it off if I'm not using it for an extended period of time while still working on the computer. Is this okay?
    3. When I'm not using the drive and the drive switch is 'off', can the drive still remain connected to 'mains' power? Or is it necessary to disconnect it from the 'mains' entirely?
    4. I understand it's best to disconnect when 'Repairing Permissions?' Can this be confirmed?
    Thanks so much.
    Cheers!
    Steve.

    1. Do I need to disconnect it (pull out the cable from my iMac) every time I Shutdown - and reconnect on Startup? Or can I leave it it and pretty much just forget about it?
    What I do is shut down my Mac, leaving it connected to the mains: the external HD, external speakers and other peripherals are all connected to a mains switch and I turn these off. There's no need to disconnect the cable: some disks spin down when the computer is shut down, some don't. It probably wouldn't hurt to leave it spinning anyway, though I prefer to shut it off at the mains. Incidentally I shouldn't disconnect the computer from the mains when you shut down: doing this will run down the PRAM battery and hasten the day it needs replacing, which is expensive.
    2. Can I turn it 'on' and 'off' any number of times (using the on/off switch on the back) when working on the iMac? I might like to switch it off if I'm not using it for an extended period of time while still working on the computer. Is this okay?
    I shouldn't do this: the most strain on a hard disk is when it is starting up, not when it is running: I should leave it running all the time the Mac is on. If you do switch it off, make sure to unmount it first (drag it to the trash) otherwise you will have all sorts of problems.
    3. When I'm not using the drive and the drive switch is 'off', can the drive still remain connected to 'mains' power? Or is it necessary to disconnect it from the 'mains' entirely?
    No: I see no problem in leaving it plugged in to the mains: the 'off' switch disconnects it anyway.
    4. I understand it's best to disconnect when 'Repairing Permissions?' Can this be confirmed?
    I've never heard this, and I can't see that there's any neccesity: the repairing process will be confined to the disk you have nominated to work on in any case.

  • Best practice for iTunes' music folder

    i keep my music on an external drive, but want itunes to be able to play the songs.
    currently, the itunes music folder is set to its default location. i changed the preference to prevent iTunes from copying music to this location. i added music to iTunes using File | 'Add folder to Library' menu.
    my friend, who also has his music on an external drive, set his itunes music folder to the Music folder on his external drive.
    what are the differences between these two approaches? what are the issues?
    is there a best practice for using iTunes w/ music stored on an external drive?
    thanks for your time.
    craig

    Thanks Paul for helping
    I am getting the symbol and can locate the song but it is very time consuming and I can't do whole albums .
    I tried dragging the entire music folder into iTunes . Is this it , iTunes Music Library.xml ? These are all the files and folders I found
    iTunes 3 Music Library Data file
    iTunes 4 Music Library Data File
    iTunes 4 Music Library (Old) Data File
    iTunes Music folder
    iTunes Music Library.xml document
    Temp File Document
    I unchecked the "Copy files to iTunes Music folder "
    before I dragged the xml. doc into the iTunes symbol in the dock .
    This seems to have made matters worse . Now I can't find the file at all except through the finder .
    Remember this is 10.3.9 with v4.7
    Powerbook   Mac OS X (10.4.6)   Panther eMac

  • Best Practice to recharge iPhone

    Dear all, I have purchased MacBook Pro for almost a year but have just newly purchased my iPhone. For MacBook Pro, I learned from Discussion forum that the best practice for charging MacBook is to keep connect AC power to it as MacBook battery management will know stop charging when the battery was fully charged.
    For iPhone, it has the similar battery design as MacBook Pro, where you cannot replace your battery like other ordinary cell phone. Therefore basically you have to charge your iPhone every day because those apps would exhaust power in a faster rate than ordinary cell phone.
    If so, as a best practice, should I always wait until the iPhone used up all battery before charging it?
    As a best practice, whenever the iphone has been charged up to 100%, should I keep connecting the AC power supply to iPhone so as to keep 100% battery power level, before I have to relocate iPhone to somewhere without AC power supply?
    Have you ever used any portable backup battery? Would it be a good idea to always connect iPhone? Or should I only connect it when it is available? Or should I only connect it when all iPhone battery has been used up?
    I look forward to your valuable comment and sharing your valuable experience.

    The iPhone includes a Lithium based battery as with your MacBook Pro.
    http://www.apple.com/batteries/
    As with your MacBook Pro, after your iPhone's battery is completely charged when remaining connected to a power source, charging stops. I always leave my iPhone connected to a power source at night so I have a fully charged battery to begin each day. I have a vehicle charger and I always connect my iPhone to the charger when driving regardless the battery level so when I arrive at my destination, I have fully charged battery or as close to it as possible when being disconnected.
    There is no "memory" effect with a Lithium based battery, so you can connect your iPhone to a power source regardless the battery level.

  • New mac - what is best practice for accounts?

    I am about to get a new mac (imac g5), and would like it to work well (ie file transfer and backup to from) my existing powerbook.
    Is there a best practice for account set up? should I use the same accounts between the two or can I set up a new account on the new mac?
    Related to this: what will key change sync give me? does that only work with the same accounts on two macs?
    thanks
    John

    With Tiger there is a migration assistant that will move everything over from your Powerbook to your new iMac G5. All you need is a firewire cable and when prompted in your first start-up select migration assistant and connect the two computers. You will need to boot up your Powerbook holding down the 't' key before you connect the two together. Good luck, Jack.

  • Nokia (N8) phone memory : best practices / guide t...

    Hi,
    I'd like to know what are the best practices to manage space / memory on my phone.
    On the N8 user guide, it is simply written : "If possible, install applications to the mass
    memory or memory card, rather than the device memory." (p.112) And that's all !
    If I understood well there are 3 types of memory on N8 :
    256 Mo RAM
    512 Mo ROM (Phone memory, C: )
    16 Go storage (Mass memory, E: )
    [and also 32GB expendable memory SDHC card 4x minimum]
    Since I bought my N8, I installed everything (apps and multimedia files) on E: (mass memory)
    Today I have on :
    C: Phone memory : 158 Mo free space over 254,4 Mo
    E: Mass memory : 732,1 Mo / 14,3 Go (with 12,3 Go of MP3 files)
    I am using a software called Netqin Mobile Guard for S^3 (which by the way I like a lot, especially the "prompt for connection" and the "web usage manager" functions) and it tells me that I have "insufficient memory on disk E:"
    So here are my questions :
    1 - Is it true that 732 Mo free on disk E: is not enough ?
    2 - Why is better to install everything on mass memory if there is 256 Mo RAM and free space on phone memory ?
    3 - If I use a SDHC card to free some space on E: (move all my MP3 files), will it consumes more battery power?
    I spent some time looking for answers on internet but I didn't find any to these questions... Any help would be much appreciated. Also if you have any advice on RAM optimisation, I'd take it ! My way to optimise it is to close all apps I'm not using from the app manager. Thanks in advance and sorry for the long post, but I think it would be helpful for a lot of people!
    Regards

    rayhipkiss wrote:
    Question 1.> 732MB is what is left on the internal mass memory. NetQin is just warning you that you do not have much storage left if you want to add more files. The " insufficient memory on disk E " is just an over dramatic warning in my opinion.
    --> this is also what I thought but as I wrote in my previous answer, I'd like to be sure my phone is not going to crash if my data reach 99% of E: capacity
    Question 2. > It is better to leave as much free memory as possible on the C drive to give the phone better performance. The less memory their is on C the slower the phone becomes.
    --> that's what I understood from what I've read but does it mean that "C: memory" is used more or less as additional RAM memory? Or is it just (as you say about Netqin app.) an "over dramatic warning" from Nokia to prevent users from reaching full capacity and then crashing the phone?
    Question 3. > I'm not sure by adding an SD card would consume any significant amount of extra power. Unless you are permanently accessing the SD card. It wont consume extra power when the phone is idle.
    --> then I may need to buy a SD card to  store all my MP3s and let everything else on the mass memory. I asked this question 'cause I remember having noticed using a palm with a sd card (I know this is old stuff) that it impacted the battery.
    It would be nice to have official statements from Nokia on these topics, don't you think?
    Thanks anyway for your answers!

  • Logical level in Fact tables - best practice

    Hi all,
    I am currently working on a complex OBIEE project/solution where I am going straight to the production tables, so the fact (and dimension) tables are pretty complex since I am using more sources in the logical tables to increase performance. Anyway, what I am many times struggling with is the Logical Levels (in Content tab) where the level of each dimension is to be set. In a star schema (one-to-many) this is pretty straight forward and easy to set up, but when the Business Model (and physical model) gets more complex I sometimes struggle with the aggregates - to get them work/appear with different dimensions. (Using the menu "More" - "Get levels" does not allways give the best solution......far from). I have some combinations of left- and right outer join as well, making it even more complicated for the BI server.
    For instance - I have about 10-12 different dimensions - should all of them allways be connected to each fact table? Either on Detail or Total level. I can see the use of the logical levels when using aggregate fact tables (on quarter, month etc.), but is it better just to skip the logical level setup when no aggregate tables are used? Sometimes it seems like that is the easiest approach...
    Does anyone have a best practice concerning this issue? I have googled for this but I haven't found anything good yet. Any ideas/articles are highly appreciated.

    Hi User,
    For instance - I have about 10-12 different dimensions - should all of them always be connected to each fact table? Either on Detail or Total level.It not necessary to connect to all dimensions completely based on the report that you are creating ,but as a best practice we should maintain all at Detail level only,when you are mentioning any join conditions in physical layer
    for example for the sales table if u want to report at ProductDimension.ProductnameLevel then u should use detail level else total level(at Product,employee level)
    Get Levels. (Available only for fact tables) Changes aggregation content. If joins do not exist between fact table sources and dimension table sources (for example, if the same physical table is in both sources), the aggregation content determined by the administration tool will not include the aggregation content of this dimension.
    Source admin guide(get level definition)
    thanks,
    Saichand.v

  • Best practices for setting up users on a small office network?

    Hello,
    I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
    Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
    Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
    All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
    Thank you,

    Hi,
    Thanks for your posting.
    When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
    For more and detail information, please refer to:
    Best Practices for Adding Domain Controllers in Remote Sites
    http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
    Regards.
    Vivian Wang

  • Add fields in transformations in BI 7 (best practice)?

    Hi Experts,
    I have a question regarding transformation of data in BI 7.0.
    Task:
    Add new fields in a second level DSO, based on some manipulation of first level DSO data. In 3.5 we would have used a start routine to manipulate and append the new fields to the structure.
    Possible solutions:
    1) Add the new fields to first level DSO as well (empty)
    - Pro: Simple, easy to understand
    - Con: Disc space consuming, performance degrading when writing to first level DSO
    2) Use routines in the field mapping
    - Pro: Simple
    - Con: Hard to performance optimize (we could of course fill an internal table in the start routine and then read from this to get some performance optimization, but the solution would be more complex).
    3) Update the fields in the End routine
    - Pro: Simple, easy to understand, can be performance optimized
    - Con: We need to ensure that the data we need also exists (i.e. if we have one field in DSO 1 that we only use to calculate a field in DSO 2, this would also have to be mapped to DSO 2 in order to exist in the routine).
    Does anybody know what is best practice is? Or do you have any experience regarding what you see as the best solution?
    Thank you in advance,
    Mikael

    Hi Mikael.
    I like the 3rd option and have used this many many times.  In answer to your question:-
    Update the fields in the End routine
    - Pro: Simple, easy to understand, can be performance optimized  - Yes have read and tested this that it works faster.  A OSS consulting note is out there indicating the speed of the end routine.
    - Con: We need to ensure that the data we need also exists (i.e. if we have one field in DSO 1 that we only use to calculate a field in DSO 2, this would also have to be mapped to DSO 2 in order to exist in the routine). - Yes but by using the result package, the manipulation can be done easily.
    Hope it helps.
    Thanks,
    Pom

  • Temp Tables - Best Practice

    Hello,
    I have a customer who uses temp tables all over their application.
    This customer is a novice and the app has its roots in VB6. We are converting it to .net
    I would really like to know the best practice for using temp tables.
    I have seen code like this in the app.
    CR2.Database.Tables.Item(1).Location = "tempdb.dbo.[##Scott_xwPaySheetDtlForN]"
    That seems to work, though i do not know why the full tempdb.dbo.[## is required.
    However, when i use this in the new report I am doing I get runtime errors.
    i also tried this
    CR2.Database.Tables.Item(1).Location = "##Scott_xwPaySheetDtlForN"
    I did not get errors, but I was returned data i did not expect.
    Before i delve into different ways to do this, i could use some help with a good pattern to use.
    thanks

    Hi Scott,
    Are you using the RDC still? It's not clear but looks like it.
    We had an API that could piggy back the HDBC handle in the RDC ( craxdrt.dll ) but that API is no longer available in .NET. Also, the RDC is not supported in .NET since .NET uses the framework and RDC is COM.
    Work around is to copy the temp data into a data set and then set location to the data set. There is no way that I know of to get to the tempdb from .NET. Reason being is there is no CR API to set the owner of the table to the user, MS SQL Server locks the tempdb to that user has exclusinve rights on it.
    Thank you
    Don

  • Best Practice for Significant Amounts of Data

    This is basically a best-practice/concept question and it spans both Xcelsius & Excel functions:
    I am working on a dashboard for the US Military to report on some basic financial transactions that happen on bases around the globe.  These transactions fall into four categories, so my aggregation is as follows:
    Year,Month,Country,Base,Category (data is Transaction Count and Total Amount)
    This is a rather high level of aggregation, and it takes about 20 million transactions and aggregates them into about 6000 rows of data for a two year period.
    I would like to allow the users to select a Category and a country and see a chart which summarizes transactions for that country ( X-axis for Month, Y-axis Transaction Count or Amount ).  I would like each series on this chart to represent a Base.
    My problem is that 6000 rows still appears to be too many rows for an Xcelsius dashboard to handle.  I have followed the Concatenated Key approach and used SUMIF to populate a matrix with the data for use in the Chart.  This matrix would have Bases for row headings (only those within the selected country) and the Column Headings would be Month.  The data would be COUNT. (I also need the same matrix with Dollar Amounts as the data). 
    In Excel this matrix works fine and seems to be very fast.  The problem is with Xcelsius.  I have imported the Spreadsheet, but have NOT even created the chart yet and Xcelsius is CHOKING (and crashing).  I changed Max Rows to 7000 to accommodate the data.  I placed a simple combo box and a grid on the Canvas u2013 BUT NO CHART yet u2013 and the dashboard takes forever to generate and is REALLY slow to react to a simple change in the Combo Box.
    So, I guess this brings up a few questions:
    1)     Am I doing something wrong and did I miss something that would prevent this problem?
    2)     If this is standard Xcelsius behavior, what are the Best Practices to solve the problem?
    a.     Do I have to create 50 different Data Ranges in order to improve performance (i.e. Each Country-Category would have a separate range)?
    b.     Would it even work if it had that many data ranges in it?
    c.     Do you aggregate it as a crosstab (Months as Column headings) and insert that crosstabbed data into Excel.
    d.     Other ideas  that Iu2019m missing?
    FYI:  These dashboards will be exported to PDF and distributed.  They will not be connected to a server or data source.
    Any thoughts or guidance would be appreciated.
    Thanks,
    David

    Hi David,
    I would leave your query
    "Am I doing something wrong and did I miss something that would prevent this problem?"
    to the experts/ gurus out here on this forum.
    From my end, you can follow
    TOP 10 EXCEL TIPS FOR SUCCESS
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204c3259-edb2-2b10-4a84-a754c9e1aea8
    Please follow the Xcelsius Best Practices at
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a084a11c-6564-2b10-79ac-cc1eb3f017ac
    In order to reduce the size of xlf and swf files follow
    http://myxcelsius.com/2009/03/18/reduce-the-size-of-your-xlf-and-swf-files/
    Hope this helps to certain extent.
    Regards
    Nikhil

  • Best-practice for Catalog Views ? :|

    Hello community,
    A best practice question:
    The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users.    I would like to know which is the best practice for segment the catalog.   I mean, some users should only see categories 10,20 & 30.  Other users only category 80, etc.    The problem is how can I implement this ?
    My first idea is:
    1. Create 110 Procurement Catalogs (1 for every prod.category).   Each catalog should contain only its product category.
    2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
    Do you have any idea in order to improve this ?
    Saludos desde Mexico,
    Diego

    Hi,
    Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
    The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
    My advice:
    -Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
    -With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
    Good luck.
    Vadim

Maybe you are looking for