Powerbook 15" won't restart from Tiger install DVD
Hi,
I am trying to start up my powerbook from the Tiger install DVD in order to use the repair disk function of Disk Utility on my hard disk. I tried both rebooting while pressing the C key, as well as selecting the DVD from Startup Disk in System Preferences. In both, the outcome is the same:
I get the grey screen with the Apple, then it turns into a blue background on which there is a white window, which shows a very strange graphic. There are two complicated looking components to this graphic. The left one looks like a grey oval shape with complicated looking lines on it, and what looks like two batteries falling out of it. The numeral "1" is under this graphic. The right hand shape is also a grey oval with various lines on it, and contains a blinking red dot. The numeral "2" is under this graphic.
There is a greyed out arrow next to the "2".
At this point, the keyboard or the mouse do not work. There is a spinning circle under the graphic, and it keeps spinning while nothing further happens.
I have no idea what these graphics mean, and google has not revealed anything. Please help!
Thanks
Seleya
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.9)
Update: I have figured out from further googling that the weird graphics are pictures of wireless mice and how to install batteries on them (?!). I have never owned a wireless mouse and certainly one has never been used on this computer. The current system on the powerbook is 10.4.9, and the install DVD for Tiger is 10.4. Is it too old to boot this machine? Is there some other way I can run the disk utility instead?
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.9)
Similar Messages
-
How do I create a start-up disk image without restarting from the Install DVD?
(I know this is not MacBook Pro question per se, but I can't find a software discussion this applies to.)
Situation:
My MBP is running, but it's acting up and Onyx tells me that the start-up volume needs repair and directs me to use Disk Utility.
But to repair a volume using Disk Utility, you must restart from the original Install DVD (or some other start-up volume).
But although the MBP will read my old Leopard Install DVD and the Install DVD that came with my MBP, it refuses to restart from either of them. (Trying to do so gets as far as the Apple logo on a gray screen and then hangs there; all disk activity ceases.)
Question:
How can I (is it even possible to) create a start-up volume on my external FW drive without starting my MBP from a DVD?
In other words, is there a way to either:
a) create a disk image from the Install DVD on my external FW drive and then designate that disk image as my start-up drive?
OR
b) create a disk image on my MBP's internal drive that I can then use to run a System Install on my external drive?
(BTW, I know I can create disk images using Disk Utility, but it offers many options for type, compression, etc., that are beyond me. )
Any advice would be greatly appreciated!OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
Restart your Mac holding down the Command-R to enter the Recovery HD.
From there you can use Disk Utilty.
http://support.apple.com/kb/HT4718
Stefan -
Impossible to start iBookG4 from Tiger install DVD
Hi all,
I want to reinstall tiger on my iBook G4 but with the install DVD in the drive I've never been able to boot from this DVD.
I put the DVD in the drive (it's the correct original DVD for this computer), reboot the iBook and keep the C key pressed, but still it starts up all the way to the desktop. The same happens when in Finder I click the icon for the install app on the dvd, the iBook restarts like it should but doesn't reboot from the DVD.
The only difference from a normal bootup, is that right after the dong and before the grey apple logo, I see a small logo of a folder with the Finder face alternating with a question mark.
Could anyone help me and tell me how to reinstall Tiger, how to get it to bootup from the DVD? Many thanks!Welcome To Discussions fcoppens!
"I have already reinstalled the OS on a Macbook and it went seamlessly, I really have no idea why this one won't start on the dvd..."
If you mean you used those same DVDs, that is truly surprising. It should not have worked.
As the MacBook is Intel, and the iBook is PPC, among other considerations.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
ali b -
Kernel panic when booting from Tiger install DVD
Short version: When I try to boot up from the Tiger installation DVD, my Power Mac G5 gives me a kernel panic. Can anyone help?
Here's the story:
I have a Power Mac G5 that I've been running Leopard on for quite some time now. Unfortunately, the software I need to use (Final Cut Studio 1) has some incompatibilities with Leopard, so I was thinking I would put Tiger back on the machine in a separate partition on the second hard drive.
I tried booting the Power Mac using the retail (black label) Tiger DVD and holding down the "C" key. The Apple logo appears on screen, but is immediately followed by a kernel panic. I'm never able to access the features on the disc. The same thing happens if I try holding down "option" during boot instead: I'm correctly allowed to choose whether to boot from the hard drive or the DVD, but once I choose the DVD, I get the Apple logo and then a kernel panic.
The same Tiger DVD works fine on other computers, so I know it's not the disc. And the Power Mac itself handles everything else without problem.
I'm kind of desperate, as I need to finish this project this week. Any help you could give would be greatly appreciated![Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
[Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
[X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
[Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
[Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
[12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800] -
Mac Pro 1.1 won't restart from boot HD or install DVD
I have a MacPro 1.1 quad which won't finish the restart sequence from Boot HD or the Install DVD. I also can't get the DVD to boot to anything but hardware test (D key), which I ran and passed. After reading lots of posts about similar problems, I was pretty sure that it is my ATI Radeon 1900 card gone bad killing the restart right after the Grey apple screen. Then, while trying everything I could think of and finally getting the OPTION key restart to get the Startup Manager, I noticed my old boot camp partition (VISTA) that I had played around with, but never used much. After several failed attempts to get the install DVD to boot, I tried the boot camp partition and to my amazement, after a pause, windows started up. (That's actually how I'm writing this now.)
I ran some tests on the graphics card from windows and it appears to be running fine, albeit a little hot. So now the question: Can the graphics card still be the culprit when it performs ok on the Windows side?
Windows also says that the OSX boot partition of the same drive that boot camp is on can't be read (using MacDrive). But a Seagate HDD diag tool checked the drive and found no errors. I guess that could be part of my problem, but then why wouldn't it boot from the install DVD or in safe mode. I even tried putting the install DVD in my macbook and booting from there in Target mode, with no luck. Also, my install DVD is the original Leopard that came with the machine, but I had upgraded to 10.6.8 later. Would that cause the DVD not to work as a boot disc? I just want to get to the Disk Utility so I can reinstall.
Any knowledge or help would be so appreciated!
ThanksI have a Mac Pro 1.1 and recently starting having issues. I was running out of drive space for my Vista drive I use Bootcamp. I decided to reinstall Vista on a bigger drive. I went through the normal procedure and had a **** of time installing Vista until I removed the main Lion SSD. Lion has Windows 7 drivers only. So I wanted to reinstall Snow Leopard on a blank drive and get those drivers.
Mac Pro will not read or mount the SL installation DVD. It mounted once and could barely read anything but at a slow rate. I cleaned the disk, but after that despite holding down not the C and D keys at boot up and using Option at boot up the SL kept getting spitted out. Tonight I took it apart and cleaned it with compressed air and vacuum cleaner. I popped the DVD again and it spit it out. I put a DVD movie and it mounted fine. I'm ripping it as we speak. I've done this before just want to see why it won't read SL.
Considered buying an external DVD write for $39 to see if I can get around this issue. Will post back on results. Otherwise this 2007 Mac Pro has been rock solid since then. -
My mac mini displays a green screen with 'mac os version not yet responded' and 'you need to restart your computer' as a warning message. Inspite of all my tries it doesnt run from the install dvd either.
Please help.Sounds like you may have a hardware problem since it won't read from DVD, and it is only a year and a half old. Hopefully all it is, is bad RAM*:
http://www.macmaps.com/badram.html -
Having trouble installing software AND restarting from OSX Install disks
This may be a previously answered problem, but I couldn't find it in the forum.
My recently-purchased MacBook has iPhoto v. 2.x on it, but this is really old -- the current version is 6 or so.
I thought a newer version might be on my Install disks, but I can't seem to get past the screen that tells me to restart in order to install System X. When I do click it, it restarts back to my login screen, and then I need to relaunch the OSX installer, and the loop starts over.
The obvious solution is to restart from the Install disk, however, I cannot start up from that disk; I hold down C while restarting, but I get a flashing folder-with-a-question-mark in it. Note the grey install disk is 10.2.4 and my computer is running 10.4.11 with upgrades. Is this the issue?
Besides hoping one of you can help me 1) start from my Install disk and 2) find and install iPhoto, perhaps someone knows which version of iPhoto I will have, if any, on this disk (CD vers 1.0, 2Z691-4306-A).
Vielen Dank!
-A-Your question was answered unless we didn't understand it correctly. You are trying to boot an Intel Mac with "Note the grey install disk is 10.2.4." 10.2.4 cannot boot any Intel Mac. BDAqua addressed that in his reply. You have not responded to either his or my original reply.
You're original question was about iPhoto. I replied that you can reinstall all originally pre-bundled software for your computer by running the Install Pre-Bundled Software installer contained on your OS X Installer Disc One that came with the computer. There's no need to boot from the installer disc in order to reinstall pre-bundled software.
So, is there a part of your question that still needs addressing? Please let us know, and we will be glad to help if we can. -
EMac won't start from startup install disk
Aloha gang,
Our school purchased 25+ seats volume license of 10.4 last year and to date I have used 15. Most upgrades have gone on without a hitch but today I'm trying to upgrade some eMacs (same models as I have previously upgraded without problem) and it will not start up from the disk no matter what I try. I've tried:
* putting in the disk, clicking on install, clicking on restart so it restarts from the install disk
* putting in the disk, starting the computer and holding the C button
* putting in the disk, starting the computer and holding the option button to choose the install disk
None of those have worked. All that happens is the grey screen with the darker grey apple and the spinning thingy beneath it. I thought it might be that I was being impatient so I started it again, went to eat lunch and when I returned it was exactly where I left it. Any suggestions?
Oh yeah - I have tried using the original purchased media as well as backup copies of the media in all instances.
Thanks for any help you can give, gang!nalani:
Thank you for indulging my ignorance and so graciously enlightening me as to your situation.
It seems to me that the difficulty you are experiencing has to do with individual computers not responding appropriately to the discs from which you are trying to boot them. The disks themselves may not be the issue at all, since you have previously booted other computers from them.
My first suggestion would be to check the computers themselves to see if they have issues that need to be corrected. If those computers are running previous versions of OS X and you have the install disks for them, see if you can boot from them and run Repair Disk. I would also check for hardware issues by running the appropriate Apple Hardware Test disk. BDAqua's suggestion to Resolve startup issues and perform disk maintenance with Disk Utility and fsck is appropriate, especially if you are unable to boot from an install disk to run Repair Disk.
BDAqua's other suggestion also has merit. That is, using one of the computers that will boot the disk as Host, boot the recalcitrant computers into Firewire Target Disk Mode and run Repair Disk and if everything checks out OK, do the installation in that way.
No one is questioning the legality of what you are doing. It is just that most of the users who post have a single user or family license at best, so your licensing situation is a bit rare around here.
Please do post back with an update of how things go if you attempt any of the suggested approaches.
Good luck.
cornelius -
Cannot start up from the install DVD
I have a Macbook and I need to run the disk utility and repair the start up disk. I insert the Tiger install DVD, hold down the c key as I restart, but it always starts up from the start up disk, not the DVD.
What gives?
OK some more info. I got the Macbook used and it did not come with the install disk. But I have a DVD of Tiger I bought to run on my old G4 which I am using to start up on the Macbook.
Macbook version is 10.4.8, DVD version is 10.4.6.Hi--
I think the problem is this. Your MacBook is Intel
based. The Tiger DVD install disk you said you used
for your G4 is for a PowerPC.
Carolyn is correct. You'd need the discs that came with your MacBook in order to start up your MacBook. The operating system on the Tiger DVD is only for the PowerPC. There are currently no "generic" retail Tiger installers for Intel Macs, because all the currently shipping Intel Macs came with Tiger, and there's no reason for the retail Tiger discs to have the Intel code..
You should try calling Apple and see if they'll let you order replacement installer discs for your MacBook.
charlie -
My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling the Mail program from the install DVD, but no go; apparently that two-year old Mail is no longer compatible with my up-to-date Leopard. I tried deleting the account (hotmail) from Mail and setting up a different account (Yahoo). After loading all the inbox two things happened: first, I still couldn't send, and second, when I closed the Mail window the whole inbox then disappeared and doesn't come back. Although I couldn't reinstall the Mail program from the install DVD, would it still be possible to reinstall the whole system from that DVD? If I do, will I lose files or will there be another problem since that DVD is now over two years old?
Thanks for any suggestions; they will be much appreciated.
P.S. I've just noticed that now I can't change the desktop picture: I go through the motions in Preferences, but the new picture doesn't appear on the desktop. Is there a systemic problem?You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
Here is the information about your upgrade fee.
Upgrade Fee
It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on. -
can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.
What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS. -
Hard disk errors, but can't boot from the install DVD
My mini reports disk errors when I run the Disk Utility Verify on the main boot hard drive. However, I have not been able to boot the computer from the install DVD. I try restarting while holding down the C key, and still it boots from the internal drive. I've tried option-restart, and do not get the opportunity to select a boot disk. An external USB drive, on which I periodically clone the main disk, now does not mount. Disk Utility says it too has errors, and it is unable to repair them. A third external USB drive appears to be OK.
The computer is still operating, apparently normally, otherwise. This computer should still be under warranty. I bought it in April, as I recall.
Any help will be much appreciated.<sigh>
I've attempted most of these things.
The drive on which I had the system clone died at essentially the same time as the problem came up with the errors on the main drive. I suspect this was due to the same root cause, or a related problem, just because of the timing. I'd cloned the main drive approximately a week previously with apparently no problem.
I also have been unable to boot from the install DVD.
The other external drive, the one that still works, is one I use mostly for rolling backups of my documents, photo and music folders. It is not big enough to hold a clone of the main drive. In any case, I'm assuming that if I attempted to clone it now, it would either not work, or I'd simply copy the errors to the clone.
I haven't used the Time Machine, since I didn't feel I had an external drive large enough to make it useful.
What 3rd party software do you recommend? Keep in mind, as I also mentioned earlier, that the computer is still under warranty, and I'm loath to do anything that could be construed as voiding the warranty.
I'm also on a pretty restricted budget, due to recent car repairs. -
Ilife not installing from Software install DVD
Hi,
I have a G5 that came preinstalled with 10.3 and the iLife programs (iphoto, iDVD, etc). Over time, I upgraded to 10.3.9. Recently my computer was having problems, so I did an erase and install from the original Software install and restore DVD to 10.3 (my computer came with one dvd). Now my computer has iphoto 2.0 and no iDVD. I can't open iphoto because i had been using a more recent version. I'm pretty sure my computer came with the iLife 04 apps, why won't it install them from the original software DVD?
Thanks in advance for any helpThanks, that was helpful. I was able to see that my Installation install and restore DVD only has iPhoto 2, and no iDVD.
I found the box that my computer came in and it says that I should have the iLife 04 programs. The only thing I can figure is that I got a seperate iLife DVD with the computer, and have lost it. I can't think of any reason that software would be missing from the install DVD. -
Reasonable pricing for Tiger install DVD?
(I'm not sure if this sould go here, but don't know where it would fit better)
I have a iMacG3 and I want to upgrade it to Tiger (leopard isn't going to work, the processor is only 400MHz)
but I don't know what sould be a reasonable price for the retail DVD
I want to get the DVD but I can't even find it and I don't feel like paying more then it's worth, especially sins I don't have that much anyway
also I was wondering
I know a store that has the DVD, for the tec-support
and they can install it but I won't actually get the DVD,
but if I don't have the DVD but only the software, doesn't that mean I also wouldn't have a license? I want to get it legaly and I don't think that will be legal, anyone knows this for sure?Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See Can I use another Mac's system restore disc on my Mac? ). Expect to pay (possibly a lot) more than the Apple list price of $129.
Also check this web store http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521
Possible Alternative if you are currently using Panther 10.3 – Do a Google search for Tiger 10.4 Upgrade DVD . It will upgrade your 10.3 to 10.4, but it doesn’t contain the full retail Tiger installer. Should be cheaper than the retail Tiger install DVD.
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
Cheers, Tom -
Leopard does not recognize Tiger install DVD as startup disk
I upgraded my MBP to Leopard. After that, the MBP never recognize Tiger install DVD and Tiger installed extra HDD as startup disk. They have never appear in the startup disk window in system preference. and I tried to use the option key or c key at startup, but they also could not work (just start from Leopard installed internal HDD). On the other hand, Leopard install DVD has been recognized.
I could not find out the same problems in net work.
Does anybody know good solution?
Thanks.
N.B.In fact, this is the most disappointing feature in Leopard.
Under Tiger I had partitioned my hard disk, with OS 9 running on one partition.
The startup of clean OS 9 worked fine with OPTION key at startup. Now, OS 9 is not recognised any more, none of my old applications are, the volume is no longer recognised as startup option under preferences or when starting with the option key, and I cannot even try to reinstall OS 9 on the partition (in case something was damaged during the upgrade process), as the CD is not recognised when starting up with using the C key... Very frustrating, and I had not heard or read about this problem before.
Only solution right now seems to be> get as much as possible on a DVD or CD, move it to an older Mac, convert, if necessary (eg old Quicktake or PICT pictures, using Graphic Converter) and move them back to the leopard machine. What a waste of time.
Maybe you are looking for
-
Hi All, My requirement is I have a report whose selection screen contains filename.On executing the program the data in the file comes as output.The output comes as node no,child name,node no for parent,parent name. Now we have to create 2 Ztable as
-
when the All Photos Album is created, all of the previously hidden files are now un-hidden. Is there a way to hide them in the new album?
-
Problems in ECC 5.0 installation?
Hi, I have sucessfully installed ECC 5.0. But whenever I execute OAM1 transcation, no Storage Queues are displayed but "MISSING" is displayed. As this is new installation the No of Storage Queues shpuld be 0 but instead "MISSING" is displayed and whe
-
RFC connection for nonSAP system
Hi all i want to send and receive data from b/w SAP and NON-SAP systems. plz tell me which type of RFC connection i will use. Regard Imran Khan
-
Zip file for Adobe LiveCycle ES3 Server trial download is corrupted
Hello All, I have download the zip Adobe LiveCycle ES3 Server trial download multiple computers but every time I got the corrupted file. I am not able to extract installation zip file. I have download it for Jboss for windows with 7C1641C814956148DA1