Powerbook AC adapter recall not available to Thailand?
Hello,
I have gone to this website for the Ac adapter recall for my powerbook http://depot.info.apple.com/exchange/ . I have put in the serial number on my adapter and it does qualify for the recall but as soon as i click "Thailand" for my country i get this message:
"Forbidden
You don't have permission to access /support/supportnumbers.html on this server.
Apache/1.3.33 Server at www.asia.apple.com Port 80"
I am a Canadian living in Thailand and i don't understand why this would disqualify me for the recall. I have sent messages to .Mac asking them to give me the email address of someone that can help me sort this out, and they have been less than helpful and outright refuse. Does anyone have any suggestions? Thanks in advance for any help.
Blake
Well just as i figured, the Thai Apple "service" line was less than helpful. I don't think she understood all that well, and she kept giving me the easy "thai" answer of no, not available anymore. I explained that the webpage doesn't say that, and I see other people on this website that 'have' done it lately. No real response to that of course. I asked her for her email so i could get it in writing make sure everyone/everything is understood. So i emailed her about it, nicely of course, and she never gave me any response.
I also got a survey from apple about my original emails asking for some help since their website gives me errors after chosing Thailand as my address. I filled out the survey stating how disappointed I am with the total lack of service. At the end it asks me what i think an acceptable amount of time would be for apple to get back to me. I chose 3 days. Again, I got absolutely no response. I will obviously be buying another computer in the near future since i have this old Lombard, but i am wondering wheather i will stay with apple since they have proven to have bad/no service. The only place i can get any help is this website. And here I have been able to get very good help!
So how can I escalate this issue to actually get somewhere?
Similar Messages
-
Why is lightning to 30 pin adapter still not available in november
iPhone 5 (and lightning) launch was in september and the apple site said that adapters would be shipping in october. This is now november and the site still says shipping in 5-7 days. How was this overlooked during the iphone 5 production? No one at apple thought until september that people might need/want a lightning to 30 pin adapter for all the 30 pin accessories collected for various ios devices over the past 10 years?
I've never been a fan of iOS but have always liked apple hardware and the fact that music syncing to ipods and iphones is so simplified (on android, you have to jump through a few hoops and there's still no good car integration for android, probably to fragmentation of android device manufacturers) and the fact that it's not difficult to find an iphone car solution (beyond aux port or fm xmitter). But this sudden change in charging/data port should have been planned much better esp coming from a company of apple's caliber.
I guess I'm just wondering if there is a good answer for such a lack of availability of such a ubiquitous accessory. $200-400 for a phone from a company with $100 billion in cash and I don't even have the option to get my hands on an adapter in stores over a month later. Any explanations from apple or other apple device users would be much appreciated to quell my frustration.Hi - sorry but this is a user to user forum - there is no way of knowing why Apple is doing what they do - and they don't monitor this forum either - so the only way to answer your questions is to contact Apple Support directly at - http://www.apple.com/support/contact/ - or you can register your opinions at -
http://www.apple.com/feedback/ -
Why is my book not available in Thailand?
Once your book is online and for sale you can edit which territories it is avalible in. I've heard from a fan in Thailand who wants to buy it but gets the message it isn't avalible to him in Thailand's iTunes store. When I check iTunes Connect and try to enable Thailand it isn't there as an option. Is there anything else I can do to get this person my book?
Maybe I'll just dropbox him a free copy.My book is as much a movie as it is a book. Over 70 minutes of video in it. The file size is 1.2Gb
The Volcan Baru Adventure
I thought about posting the video to youtube or vimeo and embedding the videos in the book. But I figured either way the customer is going to spend time waiting. Wait for the book to download, or wait for the videos to buffer on youtube. I decided to include them in the book so people just had to wait once rather than several times to load the different videos in the book. This way they can read it anywhere and not need an internet connection.
It's an experiment I really don't know what is best. -
SAP PI Soap Send adapter is not available.
Hi Experts:
i encounter a issue when use Soap sender adapter. i configured soap sender adapter senario and generate wsdl in the id .
and then import wsdl document to the soapui to test the webservice. but throw some exception blow:
<!see the documentation>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>java.lang.NullPointerException
+ at com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageOperator.getQualityOfServiceAsString(XMBMessageOperator.java:2109)+
+ at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:943)+
+ at sun.reflect.GeneratedMethodAccessor1126.invoke(Unknown Source)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:585)+
+ at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)+
+ at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)+
+ at $Proxy3087.process(Unknown Source)+
+ at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:275)+
+ at sun.reflect.GeneratedMethodAccessor518.invoke(Unknown Source)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+ at java.lang.reflect.Method.invoke(Method.java:585)+
+ at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)+
+ at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+ at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)+
+ at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)+
+ at $Proxy330.process(Unknown Source)+
+ at com.sap.aii.adapter.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:175)+
+ at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:470)+
+ at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)+
+ at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)+
+ at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)+
+ at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)+
+ at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124)+
+ at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)+
+ at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)+
+ at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)+
+ at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)+
+ at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)+
+ at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)+
+ at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)+
+ at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)+
+ at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)+
+ at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)+
+ at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)+
+ at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+ at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+ at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:457)+
+ at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)+
+ at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)+
+ at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)+
+ at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)</text>+
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
nd the find a note :sapnote_0001239995 can solve the problem in the pi 7.10 .but my pi is 7.11 .anybody know which note should be apply to solve the problem in the pi7.11 .thanks .hi,
Either you are using an incomplete URL
you can however try with this URL format:
http://<IPAddress OR ServerName>:<PORT_No>/XISOAPAdapter/MessageServlet?channel=:<SenderBusinessService>:<SenderSOAPCC>&version=3.0&Sender.Service=<SenderBusinessService>&Interface=<SenderInterfaceNamespace>%5E<SenderMI>
refer blog related ur issue:
ADAPTER.JAVA_EXCEPTION: Sender soap adapter PI 7.11
thanks, -
XI: HTTP adapter - Service not available
Hello,
We are facing a problem with our XI system, we have configured for a data processing using plain HTTP adapter. For IntegrationEngine: Inbound channel, we have created a link to access XI service and given to access via HTTP request. The link has been created as given on help.sap.com i.e.http://sap-ag.com:8088/sap/xi/adapter_plain?service=sender&namespace=urn%3Asap-ag%2Ecom&interface=%2Fsap%2Forders
Now, we are unable to get this service, we are getting 'Service unavailable' message 404. Can you please help me, where can I look for a cause and solution of this?
I have checked in Integration Builder - service, interface and namespace are defined and ae acrive.
TIA
amit thombareHello Amit,
Please find below sample URL which we have used for one of our requirements. If you are trying to communicate with XI through an exteranl application , An XIAPPLUSER is required.
http://netweaver:8000/sap/xi/adapter_plain?namespace=urn%3Aadaptive.mfg.tclproductionupdate&interface=MI_UPDATEPO&service=BS_XMII_TCL&party=&agency=&scheme=&QOS=BE&sap-user=xiappluser&sap-password=*****&sap-client=100&sap-language=EN
Thanks & Regards,
kiran -
I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?
tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port. -
Adapter Specific Message Properties not available in SP 15
Hi
In the <b>/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 blog Michal is saying that <b>Adapter Specific Message Properties </b> option in File adapter will be avalible from XI with SP 14. But i am using SP 15 and i am not getting this option in the file to file adapter. Can u please tell me the why its not available.
Thank & Regards
Ravi Shankar BHi,
Try reloading SAP BASIS software component version of SP15 only (check ) into repository.This might enable that option in the ftp/file adapter.
also see the below links
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
/people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Regards
Chilla -
Mini HDMI adapter to 55" tv, Not Available error, still see screen
basically i have a Mini HDMI adapter connected to my 55" tv, I have run the tv all day like this with no problem watsoever, but now an error message has popped up over top of (i can still see all the computer stuff i should on the tv, using it now actually) but the error message says (Not Available) i'm assuming this Not available message means that the connection is not available to the computer, but its in the middle of the screen over top of my streamed computer, my computer is running on the tv still, it just has the "not available" error right in the middle of the screen & won't go away.
sorry for the long msg i'm not good @ explaining things.Update again, error has popped up again & won't go away this time.
Did i get a faulty adapter? I know the HDMI cord itself is good, as well as the port on the tv as i have used both with other devices without problems
anyone that can possibly explain what is going on please do, I am starting to get really irritated,
& just a guess, this error has occured when opening full windowed items such as a video i tried playing, & then a game i tried opening, it was fine each time running safari & skype until i tried opening those full windowed items, would that make any difference? if i can fix it again i'll try my theory, -
I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)
Has the ISP modems and routers been power cycled then tested again?
Possible ISP connection issues or LinksysSmartWiFi.com service outage maybe...
Are FW versions on all routers up to date?
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router. <If this was on, possible someting was updated recently. I recommend leaving this OFF.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way. -
Replacement airport card-not available
Apparently the airport card on my new ( 2 weeks old) MBPro failed. One minutes I was on line, wirelessly, then next ... nothing.
I know that Airport was working, because I immediately fired up my 'old' G4 iBook, and was immediately connected via Airport.
On the MBPro, even after re-starting/repairing permissions, etc., the Airport card did not show up in the System Profile.
I returned it to the Apple Authorized dealer; he checked it out, concluded that the card had gone bad. Ordered a replacement, and was told by Apple that they were 'not available'.
I called Applecare, who also told me that they were not available, and that they didn't know when they would be. The rep assigned a case number, 'escalated' the problem, said they'd get back to me within two days.
Is it not unreasonable to expect that Apple is still shipping MBPro's that they do have a source for a replace Airport card? Any idea what their problem is?
How long should I wait before asking for a replacement MBPro, if they can't fix mine right away?
Thanks,
Hal<<<Re airport cards, two items:
Yesterday, my new MBPro suddenly stopped 'seeing' it's Airport connection.>>
This a 'Christmas' story, with a happy (for now) ending.
Recall, my airport connection suddenly disappeared. After some troubleshooting,
which seemed to confirm that it was indeed gone, I took it back to the Apple
Reseller I had bought it from. They confirmed the diagnosis, that the airport
card was seated properly, but airport wasn't working.
They had no other card to try, so I left the computer: they ordered a card,
then called and told me Apple didn't have any in stock! that they had no idea
how long it might be before one came in!
Amazing.
I called Applecare, and after some discussion, they escalated the case -- they
promised to get back to me within two days.
Today, two days later, we talked: still no 17" MBPro Airport cards in their
system. They agreed that Apple were still making this model, that somebody ...
somewhere ... undoubtedly had come airport cards, but that their supply system
didn't. They promised to call me the 26th.
In the meantime, I had run across this on the Apple MBPro Support Forum:
"I've had a similar problem in the past but it only dealt with the Airport
unavailability. I quickly resolved the issue by doing the following:
PMU RESET
1. Turn off computer.
2. Remove battery and unplug a/c power.
3. Hold power button down for 5 seconds.
4. Replace battery and a/c adapter and restart computer.
It's basically just a power management reset, for some reason it helps your
computer locate and identify drivers. I don't know how it works exactly, but I
do know it worked for me. give it a try and let us know.'
Though I sent this to the vender yesterday, for some reason they didn't try it.
So that I could at least have the use of the computer over the holidays, I went
out today, and picked it up, brought it home, and tried the above. And guess
what! Success!
When the computer re-started, there was the airport connect!
I 'suppose' that pulling the battery, re-set -- something? Any ideas what
happened, and why this 'fix' worked? I don't want to look 'gift horses' in the
mouth --- I"m glad it worked, but was curious if anyone had an idea what
happened to make it 'disappear', and why the 'cure' worked?
Happy Holidays,
Hal -
How to connect my ipad to TV is vga adapter is not working
Hi i am trying to connect my ipad via vga to my beovision 9. All is correctly installed but its not working. My Beovision service centre advises to purchase an hdmi adapter but this apparently not available. Any suggestions What to do next ??
HI and welcome....
This thread may offer some ideas for you.
http://discussions.apple.com/thread.jspa?messageID=11579515�
Carolyn -
Apple DVI to Video adapter + Mini DVI to DVI adapter pins not same
I just purchased an Apple DVI to Video adaptor so I could plug in a Mac mini to an older tv, however the pin arrangement on the Apple DVI to Video adapter is not the same as the pin arrangement on the Mini DVI to DVI adapter that came with the Mac mini.
Anyone have any idea what adapter I can use to make this connection?Joseph Kriz wrote:
James,
I'm confused here.
Which Mini do you have?
I know you posted this in the 2009 Mac Mini section so your Mini should have 2 video out ports.
1. Mini DVI
2. Mini DisplayPort
If that is true, then there is no way you could have connected the DVI to Video adapter in your first post as the new Mini does not have a DVI port.
The new Mini's come with 1 adapter.
Mini DVI to DVI adapter.
I don't know of any Apple adapters that will output to S Video, component or composite connections on the new Mini's.
The one that osxdude shows above will not work on a new Mini. It say nothing about a Mini in their description:
*The Mini-DVI to Video adapter is designed for the iMac (Intel Core Duo), MacBook*, and 12-inch PowerBook G4, allowing you to connect to most S-video or Composite enabled devices.*
Good Luck and let us know what you find.
Yes, I have a late 2009 Mac mini. It came with the mini DVI to DVI adapter as you stated. I need to hook up to an older tv with yellow component video port. Not knowing any better, and looking online, it looked like the male DVI end of the “Apple DVI to video” adapter would connect to the female DVI end of the “Mini DVI to DVI” adapter that came with the Mac mini. I figured that since they were both DVI plugs, male and female, they would connect, but the “Apple DVI to video” adapter has 4 extra pins, so they won’t.
Then, following osxdude’s lead, I went to a local independent Apple store, and they told me that the same adapter that osxdude suggested would work, so I bought that (at an inflated price), but as you stated, it does not work. Also, as you stated, the Apple site does not list the Mac mini as being used with this adapter, which is why I did not originally purchase it online. It was only at the insistence of the independent Apple store that it would work that I purchased it. Unfortunately, once the package is opened
the store were I purchased it will not take it back. Boy... this is getting expensive, and confusing! Why so many adapters?
After much searching I found this info: http://forums.macrumors.com/showthread.php?t=706736&highlight=monoprice so I’m going to try that.
Once it’s all said and done, I guess I’ll be listing a few adapters on ebay! -
The Default Gateway Is Not Available / Problem
Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft WindowsRun the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Hi.
Could you help me ....
I modified a bsp to display a PDF file into a new popup window, and I tested into my quality server using SE80 transaction and with my portal application after and evething was OK but when a released the new BSP into production server the BSP crashed.
This is the error message that throws:
503 Service not Available
Erro 6
Version 6040
MOdule http_j2ee_mt.c
Line 795
Server EMKIOAIX103_CRP_00
Details Cannot reach external application server on localhost:50000
I explain you my program does it:
1.- the user chooses the a record into a Inbox
2.- IC display its data with BSP IRecReason
3.- the user chooses a Action link
4.- IC display a action PRINT PDF
5.- the user selects a print pdf
This is my code to EH_ONGO than create the PDF spool
METHOD EH_ONGO .
DATA: function_name TYPE rs38l_fnam,
dummy(254) TYPE c,
ls_archive_index TYPE toa_dara,
ls_orderadm_h TYPE crmt_output_orderadm_h_com,
ls_activity_h TYPE crmt_output_activity_h_com,
ls_lead_h TYPE crmt_output_lead_h_com,
ls_opport_h TYPE crmt_output_opport_h_com,
ls_orgman_h TYPE crmt_output_orgman_h_com,
lt_partner_h TYPE crmt_output_partner_h_comt,
ls_pricingdata_h TYPE crmt_output_pricingdata_h_com,
ls_sales_h TYPE crmt_output_sales_h_com,
ls_shipping_h TYPE crmt_output_shipping_h_com,
lt_payplan_d_h TYPE crmt_output_payplan_d_h_comt,
ls_customer_h TYPE crmt_output_customer_h_com,
ls_cumulat_h TYPE crmt_output_cumulat_h_com,
lt_billing_h TYPE crmt_output_billing_h_comt,
lt_cancel_h TYPE crmt_output_cancel_h_comt,
lt_appointment_h TYPE crmt_output_appointment_h_comt,
lt_billplan_d_h TYPE crmt_output_billplan_d_h_comt,
lt_billplan_h TYPE crmt_output_billplan_h_comt,
lt_status_d_h TYPE crmt_output_status_d_h_comt,
lt_status_h TYPE crmt_output_status_h_comt,
lt_srv_subject_h TYPE crmt_output_srv_subject_h_comt,
lt_srv_reason_h TYPE crmt_output_srv_reason_h_comt,
lt_srv_result_h TYPE crmt_output_srv_result_h_comt,
ls_acs_h TYPE crmt_acs_h_com,
lt_orderadm_i TYPE crmt_output_orderadm_i_comt,
lt_orgman_i TYPE crmt_output_orgman_i_comt,
lt_pricingdata_i TYPE crmt_output_pricingdata_i_comt,
lt_pricing_i TYPE crmt_output_pricing_i_comt,
lt_product_i TYPE crmt_output_product_i_comt,
lt_sales_i TYPE crmt_output_sales_i_comt,
lt_shipping_i TYPE crmt_output_shipping_i_comt,
lt_schedlin_i TYPE crmt_output_schedlin_i_comt,
lt_customer_i TYPE crmt_output_customer_i_comt,
lt_partner_i TYPE crmt_output_partner_i_comt,
lt_item_cstics_i TYPE crmt_item_cstics_tab,
lt_billing_i TYPE crmt_output_billing_i_comt,
lt_cancel_i TYPE crmt_output_cancel_i_comt,
lt_finprod_i TYPE crmt_output_finprod_i_comt,
lt_ordprp_i TYPE crmt_output_ordprp_i_comt,
lt_appointment_i TYPE crmt_output_appointment_i_comt,
lt_billplan_d_i TYPE crmt_output_billplan_d_i_comt,
lt_billplan_i TYPE crmt_output_billplan_i_comt,
lt_orderadm_i_qt TYPE crmt_output_orderadm_i_qt_comt,
lt_orderadm_i_in TYPE crmt_output_orderadm_i_in_comt,
lt_schedlin_i_cf TYPE crmt_output_schedlin_i_cf_comt,
lt_status_i TYPE crmt_output_status_i_comt,
lt_working_set_e_s_bbp TYPE /1cn/working_set_e_s_bbp_t,
lv_language LIKE sy-langu,
lo_order TYPE REF TO cl_doc_crm_order,
lv_object_guid TYPE crmt_object_guid,
lv_object_kind TYPE crmt_object_kind,
lv_status TYPE jstat,
lt_status TYPE TABLE OF jstat,
lv_error_tab_wrk TYPE ssferror,
ls_output_options TYPE ssfcompop.
DATA: IP_SMART_FORM Type TDSFNAME,
IO_APPL_OBJECT Type Ref To OBJECT,
IO_APPL_OBJECT Type Ref to CL_DOC_CRM_ORDER_H,
IO_PARTNER Type Ref to CL_PARTNER_PPF,
IS_ARCHIVE_INDEX Type TOA_DARA,
CT_ARCHIVE_INDEX_TAB Type TSFDARA,
IS_ARCHIVE_PARAMETERS Type ARC_PARAMS,
control_parameters TYPE ssfctrlop,
IS_MAIL_APPL_OBJ Type SWOTOBJID,
IS_MAIL_RECIPIENT Type SWOTOBJID,
IS_MAIL_SENDER Type SWOTOBJID,
IP_USER_SETTINGS type TDBOOL,
ES_DOCUMENT_OUTPUT_INFO type SSFCRESPD,
ES_JOB_OUTPUT_INFO type SSFCRESCL,
ES_JOB_OUTPUT_OPTIONS type SSFCRESOP.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
lt_lines type table of tline,
ls_line type tline,
l_pdf_len type i,
lv_exist type n,
output_data type ssfcrescl,
lp_proc_stat TYPE ppfdtstat.
Explanation: this method executes the action,
gets the medium, gets the log, reads the messages from
the log and gets the spool id from the messages. JLARIN 27/DIC/06
DATA: lv_event TYPE REF TO cl_htmlb_event_tableview,
lv_index TYPE int4,
wa_action TYPE LINE OF crmt_action_table_tab,
ls_action_obj TYPE REF TO if_action_ppf,
lr_action TYPE REF TO cl_trigger_ppf,
lr_medium type Ref to if_medium_ppf,
ls_action TYPE zcrmt_action,
lv_spoolid TYPE symsgv.
DATA:
grid type ref to cl_crm_ic_gridlayout,
GLOBAL_EVENT type string.
data: lo_trigger type ref to CL_TRIGGER_PPF,
lo_sfprint type ref to CL_SF_PRINT_PPF,
lo_typed_context type ref to CL_CRM_IC_IRECACTIONPLAN_CTXT,
lt_all_data type PPFSINPRRU.
data: lo_rp_rc type i.
DATA: lv_head_guid TYPE crmt_object_guid.
DATA: adminh TYPE REF TO cl_crm_ic_irecactionplan_cn02,
guidstring TYPE string,
guid TYPE crmt_object_guid,
action_obj TYPE crmt_action_obj_tab,
lv_object_id TYPE crmt_object_id.
DATA: request_event TYPE REF TO cl_htmlb_event.
DATA: event_data TYPE REF TO if_htmlb_data.
DATA: event_value type string.
event_data = cl_htmlb_manager=>get_event_ex( request ).
if event_data is bound.
try.
request_event ?= event_data.
catch cx_sy_move_cast_error.
clear request_event.
endtry.
event_value = event_data->event_id.
translate event_value to lower case. "#EC TRANSLANG
endif.
if event_value <> 'x1_x3_x17_x21_actionitems'.
return.
endif.
TRY.
create object lo_sfprint.
create object lo_trigger.
lv_exist = 1.
Get the header GUID
adminh = typed_context->btadminh.
guidstring = adminh->get_actionitem( 'GUID' ).
If guidstring is initial.
return.
endif.
lv_head_guid = guidstring.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
EXPORTING
iv_orderadm_h_guid = lv_head_guid
IMPORTING
ev_object_id = lv_object_id
EXCEPTIONS
admin_header_not_found = 1
OTHERS = 2.
CALL FUNCTION 'CRM_ACTION_GET_TOOLBAR_IL'
EXPORTING
iv_ref_guid = lv_head_guid
iv_ref_kind = 'A'
IMPORTING
et_action_obj = action_obj
et_action_fld = action_fld
EXCEPTIONS
parameter_error = 1
error_occurred = 2
error_message = 3
OTHERS = 4.
IF sy-subrc EQ 0.
LOOP AT action_fld INTO wa_action where applkey = lv_object_id.
ENDLOOP.
IF sy-subrc EQ 0.
ls_action_obj = wa_action-action.
lv_exist = 0.
ENDIF.
ENDIF.
if lv_exist is initial.
CALL METHOD ls_action_obj->get_processing
IMPORTING
ei_processing = lr_medium.
CALL METHOD lo_trigger->get_appl
RECEIVING
result = io_appl_object.
call function 'CRM_ACTION_GET_APPL_OBJECT'
exporting
iv_ref_guid = lv_head_guid
iv_ref_kind = 'A'
IMPORTING
EV_APPL_OBJECT = io_appl_object.
CALL METHOD lr_medium->execute
EXPORTING
io_appl_ref = io_appl_object "lo_appl_ref
RECEIVING
rp_status = lp_proc_stat
EXCEPTIONS
missing_arguments = 1
OTHERS = 2.
ip_smart_form = lr_medium->get_smartform( ).
ip_smart_form = 'ZIMPR_ORDEN_RASTREO'.
get the function name for this smart form
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = ip_smart_form
IMPORTING
fm_name = function_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
determine the tables of the application
CALL FUNCTION 'CRM_OUTPUT_SINGLE_READ'
EXPORTING
iv_object = io_appl_object
iv_smart_form = ip_smart_form
ir_partner = io_partner
IMPORTING
es_output_orderadm_h = ls_orderadm_h
es_output_activity_h = ls_activity_h
es_output_lead_h = ls_lead_h
es_output_opport_h = ls_opport_h
es_output_orgman_h = ls_orgman_h
es_output_pricingdata_h = ls_pricingdata_h
es_output_sales_h = ls_sales_h
es_output_shipping_h = ls_shipping_h
et_output_partner_h = lt_partner_h
et_output_payplan_d_h = lt_payplan_d_h
es_output_customer_h = ls_customer_h
es_output_cumulat_h = ls_cumulat_h
et_output_billing_h = lt_billing_h
et_output_cancel_h = lt_cancel_h
et_output_appointment_h = lt_appointment_h
et_output_billplan_d_h = lt_billplan_d_h
et_output_billplan_h = lt_billplan_h
et_output_status_d_h = lt_status_d_h
et_output_status_h = lt_status_h
et_output_srv_subject_h = lt_srv_subject_h
et_output_srv_reason_h = lt_srv_reason_h
et_output_srv_result_h = lt_srv_result_h
es_output_acs_h = ls_acs_h
et_output_orderadm_i = lt_orderadm_i
et_output_orgman_i = lt_orgman_i
et_output_pricingdata_i = lt_pricingdata_i
et_output_pricing_i = lt_pricing_i
et_output_product_i = lt_product_i
et_output_sales_i = lt_sales_i
et_output_shipping_i = lt_shipping_i
et_output_schedlin_i = lt_schedlin_i
et_output_partner_i = lt_partner_i
et_item_cstics_i = lt_item_cstics_i
et_output_customer_i = lt_customer_i
et_output_billing_i = lt_billing_i
et_output_cancel_i = lt_cancel_i
et_output_finprod_i = lt_finprod_i
et_output_ordprp_i = lt_ordprp_i
et_output_appointment_i = lt_appointment_i
et_output_billplan_d_i = lt_billplan_d_i
et_output_billplan_i = lt_billplan_i
et_output_orderadm_i_qt = lt_orderadm_i_qt
et_output_orderadm_i_in = lt_orderadm_i_in
et_output_schedlin_i_cf = lt_schedlin_i_cf
et_output_status_i = lt_status_i
et_output_wrk_set_e_s_bbp = lt_working_set_e_s_bbp
ev_language = lv_language.
control_parameters-langu = sy-langu.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
call function to process smart form
CALL FUNCTION function_name
EXPORTING
archive_index = is_archive_index
archive_index_tab = ct_archive_index_tab
archive_parameters = is_archive_parameters
control_parameters = control_parameters
mail_appl_obj = is_mail_appl_obj
mail_recipient = is_mail_recipient
mail_sender = is_mail_sender
output_options = ls_output_options
user_settings = ip_user_settings
orderadm_h = ls_orderadm_h
activity_h = ls_activity_h
lead_h = ls_lead_h
opport_h = ls_opport_h
orgman_h = ls_orgman_h
partner_h = lt_partner_h
pricingdata_h = ls_pricingdata_h
sales_h = ls_sales_h
shipping_h = ls_shipping_h
payplan_d_h = lt_payplan_d_h
cumulat_h = ls_cumulat_h
customer_h = ls_customer_h
acs_h = ls_acs_h
billing_h = lt_billing_h
cancel_h = lt_cancel_h
appointment_h = lt_appointment_h
billplan_d_h = lt_billplan_d_h
billplan_h = lt_billplan_h
status_d_h = lt_status_d_h
status_h = lt_status_h
srv_subject_h = lt_srv_subject_h
srv_reason_h = lt_srv_reason_h
srv_result_h = lt_srv_result_h
orderadm_i = lt_orderadm_i
orderadm_i_qt = lt_orderadm_i_qt
orderadm_i_in = lt_orderadm_i_in
orgman_i = lt_orgman_i
pricingdata_i = lt_pricingdata_i
pricing_i = lt_pricing_i
product_i = lt_product_i
sales_i = lt_sales_i
schedlin_i = lt_schedlin_i
schedlin_i_cf = lt_schedlin_i_cf
shipping_i = lt_shipping_i
partner_i = lt_partner_i
item_cstics_i = lt_item_cstics_i
customer_i = lt_customer_i
billing_i = lt_billing_i
cancel_i = lt_cancel_i
finprod_i = lt_finprod_i
ordprp_i = lt_ordprp_i
appointment_i = lt_appointment_i
billplan_d_i = lt_billplan_d_i
billplan_i = lt_billplan_i
status_i = lt_status_i
working_set_e_s_bbp = lt_working_set_e_s_bbp
language = lv_language
IMPORTING
document_output_info = es_document_output_info
job_output_info = output_data
job_output_options = es_job_output_options
EXCEPTIONS
output_canceled = 1
parameter_error = 2
OTHERS = 3.
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = l_pdf_len
bin_file = l_pdf_xstring
TABLES
OTF = OUTPUT_DATA-OTFDATA
LINES = LT_LINES
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
others = 5.
IF SY-SUBRC = 0.
DATA: lv_string TYPE string,
lv_numguid(10) TYPE N.
lv_string = lv_spoolid.
lv_numguid = lv_object_id.
CALL METHOD op_previewspool( iv_spoolid = lv_string ).
me->op_previewspool( iv_spoolid = lv_string
lv_pdf_xstring = l_pdf_xstring
lv_guid = lv_numguid ).
ENDIF.
endif.
CATCH cx_sy_move_cast_error.
ENDTRY.
ENDMETHOD.
<b>This part send the result to a new windows and refresh a main page, but thow a error 503 ...</b>
method OP_PREVIEWSPOOL .
*{ INSERT CRDK902447 1
DATA: lv_url TYPE string.
DATA: cached_response TYPE REF TO if_http_response,
new_navegator TYPE REF TO CL_WB_NAVIGATOR_NEW_WINDOW,
new_navigation TYPE REF TO CL_BSP_NAVIGATION.
DATA: guid TYPE guid_32.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
display_url type string,
pagina_url type string,
display_pag type string,
V_TARGET_URL TYPE STRING,
W_APP_NAME TYPE STRING,
l_pdf_len type i.
DATA: out TYPE REF TO IF_BSP_WRITER,
lv_out TYPE REF TO cl_BSP_WRITER,
lv_context Type Ref to IF_BSP_PAGE_CONTEXT,
lv_body type string,
lv_body2 type string,
lv_guidmem(10) type n,
lv_doscmd(200),
lv_pag type xstring,
lv_back(2) type n.
IF not lv_pdf_xstring is initial.
CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
l_pdf_len = xstrlen( lv_pdf_xstring ).
cached_response->set_data( data = lv_pdf_xstring
length = l_pdf_len ).
cached_response->set_header_field( name = if_http_header_fields=>content_type
value = 'application/pdf' ).
cached_response->set_header_field(
name = 'content-disposition'
value = 'attachment; filename = test.pdf' ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 180 ).
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
DATA:
LV_HOST TYPE STRING, "Host name
LV_PORT TYPE STRING, "Port Number
LV_LOCAL_URL TYPE STRING, "URL (Relative to the Current Server)
LV_ABS_URL TYPE STRING, "URL (Absolute, incl. Protocol, Host, Port)
LV_PROTOCOL TYPE STRING, "Available Protocol
LV_servidor TYPE STRING. "Available Protocol
Construct the Target URL
CALL METHOD RUNTIME->CONSTRUCT_BSP_URL
EXPORTING
IN_PROTOCOL = 'http'
IN_APPLICATION_NS = RUNTIME->APPLICATION_NAMESPACE
IN_APPLICATION = 'crm_ic'
IN_PAGE = '**/crm_ic'
IMPORTING
OUT_ABS_URL = V_TARGET_URL
OUT_HOST = LV_HOST
OUT_PORT = LV_PORT
OUT_LOCAL_URL = LV_LOCAL_URL
OUT_PROTOCOL = LV_PROTOCOL.
CONCATENATE 'crm_ic' '/**/' INTO W_APP_NAME.
REPLACE W_APP_NAME IN V_TARGET_URL WITH SPACE.
CONCATENATE V_TARGET_URL '/' guid '.pdf' INTO display_url.
cl_http_server=>server_cache_upload( url = display_url
response = cached_response ).
lv_url = adapter->if_bsp_page~get_page_url( ).
if LV_PORT is initial.
concatenate 'http://' LV_HOST lv_url+0(61) 'default.do' into lv_url.
else.
concatenate 'http://' LV_HOST ':' LV_PORT lv_url+0(61) 'default.do' into lv_url.
endif.
lv_body2 = '<html><head><script language=JavaScript>'.
concatenate lv_body2 'window.open("' display_url '"); ' INTO lv_body2.
concatenate lv_body2 ' location.href = "' lv_url '"; </script></head>' INTO lv_body2.
concatenate lv_body2 '<body></body></html>' INTO lv_body2.
concatenate lv_body2 ' function back(){ history.back( ); } </script></head>' INTO lv_body2.
concatenate lv_body2 '<body><a href="javascript:back();">regresar</a></body></html>' INTO lv_body2.
response->append_cdata( data = lv_body2 ) .
response->set_header_field( name = 'content-type'
value = 'text/html' ). "#EC NOTEXT
response->set_header_field( name = 'cache-control' value = 'max-age=0' ). "#EC NOTEXT
response->set_header_field( name = 'Expires' value = '0' ). "#EC NOTEXT
navigation->response_complete( ).
return.
ENDIF.
endmethod.Using the search bar, it seems it's a proxy issue, but finding a simple solution did not seem apparent. Have you tried a reboot? To reboot, hold the power and home buttons at the same time for at least 10 seconds (hold past the swipe to shut down bar, should it appear) until the Apple Logo appears, then let go fo both buttons and your iPad will restart. Hopefully, this will solve the problem......
-
Apple DVI to ADC Adapter - DID NOT WORK !!!!
I have a PowerMac G4 Model M5183 and I wanted to connect it to a 20" Apple Cinema Display that I got.
Because the display output on the computer is different than the monitor, I bought the Apple DVI to ADC Adapter that everyone talks about on the support pages.
Problem is, that the start button on the monitor, will not start the computer. And if I start the computer with the ON/OFF button on it, the monitor comes on after a few seconds, the "Apple" appears and the wheel starts spinning....but the monitor goes black after about 25 seconds. I hooked comp. to a Viewsonic via the DVI port and the computer works fine. I hooked the monitor to a G4 with the ADC port and the monitor works fine. AND, I took the first Apple DVI to ADC Adapter back to the store, thinking it was bad...second one didn't change anything.
HELP!!!!!Computer will not start with button on display.
When you use the power button on the display, the start signal is transmitted via the USB bus to the computer. The DVI interface on the computer does not have the required USB signals to start the computer. If that is a requirement, you need a graphics card with ADC connector, which requires a computer with the 25 Volt power supply.
... the monitor goes black after about 25 seconds.
That is about the time the System uses the stored Display Preference to re-initialize the display. It may mean the stored Display Resolution Preference has the wrong values for this display to sync up. You can start up from another source and attempt to delete the preference file, or start up using another monitor and set the screen resolution to something really simple, like 640 by 480.
Your Mac cannot query the display about its capabilities, because its usual method, across the built-in USB connection, is not available. So it must use the stored value instead.
Maybe you are looking for
-
Text item print in report???
Hi all I have a problem in Report 6i I created a report there is many field and text item there is any possibility that if any field is empty related text item not print just like field. suppose: Text item data Name........:- abc Father Name.:- any p
-
I wanted to restore my new Macbook Air (over the web).. using a new apple ID instead of the old one I originally used when I bought the computer from the apple store a month ago. By doing that, everything worked, but the iLife programs that original
-
I've been trying to change my icloud apple ID to match my itunes apple ID so i can manage my storage. I haven't turned on the cloud since i got the phone. I've forgotten my password for the icloud apple ID and i do not have access to the OLD OLD OL
-
VPN connects when on LAN but not via WAN
Hi Guys, I've recently configured a VPN on my SLS. I uses the following settings: L2TP over IPsec PPP Authentication: Directory Services: MS-CHAPv2 Shared Secret: xxxxxxxxx Client Information: DNS Servers: 10.0.1.250 (my server) 10.0.1.1 (my airport
-
How do I get to this particular menu?
Hi there, I just bought my first ipod touch. I was just holding it in my hand while music was playing on it, and I was glancing at my computer monitor and reading something. Then I looked back at my ipod and I noticed a menu I had never seen before.