Powerbook cannot find wired network connected HP Photosmart C7280

OK, I'm sure this must be a common problem, but just in case anyone has any ideas, here goes.
Downloaded the latest HP software for C7280 for Leopard and it will not see the C7280 which is networked. All other computers (2 windows XP and 1 OSX 10.4.11) work fine. I can ping the C7280, but it will not find it either using the HP software OR the add printer option under system preferences. I have uninstalled twice and downloaded twice. I also reset the printer settings. Absolutely nothing works to get this printer going. I realize this is Beta software, but you would expect it to at least be able to find the printer! Why would HP do this???
OK, enough rant. Anybody have any solutions?? Thanks.

Hi:
There is only one driver for the ethernet adapter in your model and it is this one...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5086540&sp...

Similar Messages

TS1398 iphone 5 and sky hub? My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Any ideas?

My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Most of the time says unable to join network? My laptop and ipad seem fine? Very annoying Please help!

All the information you need is right here: http://www.apple.com/iphone/specs.html
Notice there is no mention of WiMax.
It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment.

PC cannot find wired router wrt54g2

I recently bought a new computer and wired it to the router and it worked fine. Since then I have replaced vista with xp, now when try to configure the router it says "cannot find wired router" in both LELA and when I try to setup from the disc.

When you replaces the OS on your Computer, make sure the Ethernet Drivers are installed on your Computer. When your computer is Hardwird to the Router are you able to access Internet on your Computer?
Click on Start - Control Pannel - Network Connection - in this window check if you are able to see "Local Area Connection", Right click on it and click on Status and click on the Support tab, below it will display you the IP address. Check whats the IP address your computer is getting it from the Router, it should be 192.168.1.xxx.
If you are trying to configure your router using the setup disk, you can exit from the setup and configure all the settings on your Router manually..
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Sometimes cannot find wireless networks??

i've looked around on a couple messege boards, but they didn't seem to be exactly the same problem i was having.
essentially, after waking up from sleep or hibernate, i sometimes cannot find wireless networks. the wireless switch will be on, Fn + F5 says my wireless is on, yet nothing can be found. strangely, when i try to turn off wireless, whether it's through Fn +F5, or the hardware switch, the light below the monitor remains ON. basically, i can't even turn it off. when i do click the button to try and turn off wireless, it gives me the busy cursor and eventually the whole menu disappears.
the way to fix this is by restarting.
just today, however, i suffered this same problem, even though i wasn't coming back from sleep or hibernate - it just lost connection randomly and then couldn't find any networks. attempts to turn off wireless failed.
is there a solution? is this actually the same problem that was remedied by changing a power setting?
thanks in advance.
Message Edited by supra97RX7 on 07-14-2008 11:47 PM

Yeah I'm having this problem too, with my antique T41 running XP. It used to be rock solid it seemed to change when I installed XP SP3.
I have tried reinstalling the Intel drivers but that hasn't helped. It seems when it restarts after hibernate (and occasionally at other times, as with the previous poster) it somehow doesn't lock on to the signal or it gets confused in the protocol or something. It doesn't always happen though - about one in three. Rebooting cures it...until the next time....
any assistance / ideas most welcome, thanks.
PS I'm using Windows Zero Configuration not Access Connections. That was a change some years ago that made it work better so I'm inclined to stick with that unless someone can tell me why not....

Playbook cannot find WIFI networks

Hi, I have a new Playbook 16gb wifi and the wifi isn't working. Essentially what happened was after I completed the initial setup it prompted me to install an OS update after which the WIFI stopped working. I cannot connect to any network no matter the type a/b/g/n, the frequency, the channel or the mode. I have tried on two Netgear routers, 1 DLink and 1 iPhone (used as a hot spot). I have tried PBS using the actual button and the PIN but neither works. It just cannot find any networks.
I tried resetting to factory defaults but that has made the situation worse because I am now stuck at the setup screen with no networks to complete setup. I can't connect to the desktop software either because the installation hasn't completed.
Any suggestions would be greatly appreciated.
Cheers
David

Hello
Were you able to fix the wifi issue ?
I have successfully reloaded QNX OS on the Playbook using Desktop manager.
Version 1.0.7.2942 was loaded.
I still have the same problem, it is impossible to connect to the wifi network.
I have tried wpa2, wpa and wep , nothing works. I have tried at over 10 different routers. I tried with routers where other playbook wifi works well, but this one playbook won't connect, I always get the same error while trying to pair to the network, it doesn't event get to the acquiring IP address phase.
Thanks

Windows cannot find any networks

hi all
my dsl network connection is not being discovered by vista all of a sudden i tried all possible means but in vain any help would be greatly appreciated!
the error message says "windows cannot find any networks"
its an adsl connection connected through a local area network
Message Edited by samavedam_vijay on 11-23-2008 09:54 PM
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo
Solved!
Go to Solution.

Hi,
I think you already have done a Vista system restore?
Which program do you use for connecting? AC or Vista.
What have you done before and did this happen all of a sudden?
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

My hp top shot laserjet pro m275 cannot find my wireless connection

Hi there,
my printer cannot find any wireless connection available.
and the blue light on the wifi icon is blinking.
how do I solve this problem so i can print again?

The blue wireless light flashing means you are not connected to your routers SSID. You need to go back and connect to your routers SSID with it's password to get the light on solid.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

MBP takes long time to restore wired network connection after wake-up

Hello...
My Mid-2010 MBP (MacBookPro6,2) has been experiencing this problem recently -- Whenever I wake up the computer from sleep, it needs approximately 10 seconds to restore its wired network connection. I know there are other annoying connection issues with MBP's WiFi/AirPort out there, but I'm talking about the wired connection here.
Maybe some don't even think this slowness is a problem at all, but this laptop used to be network-ready right after wake-up until 3~4 months ago. That was around the time when I upgraded to SSD and changed some settings via pmset, not sure if that's the culprit. It is now running OS X 10.8.5 and its pmset settings are:
Battery Power:
lidwake              1
ttyskeepawake        1
hibernatemode        3
gpuswitch            2
hibernatefile        /var/vm/sleepimage
displaysleep         2
sleep                15
acwake               0
halfdim              1
sms                  0
lessbright           1
disksleep            10
AC Power:
lidwake              1
ttyskeepawake        1
hibernatemode        0
gpuswitch            2
hibernatefile        /var/vm/sleepimage
womp                 1
displaysleep         10
networkoversleep     0
sleep                60
acwake               0
halfdim              1
sms                  0
disksleep            0
I'd appreciate help of any kind
Thanks,
zuoy

Maybe try this, i am not sure that it will resolve the problem, but it is worth trying anyways.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/eef49e64-157c-4082-8e80-52e48309691f
Hi All,
I've seen this problem multiple times, especially with Windows 7 64-bit versions and Enterprise edition. The source of the problem appears to be the Bonjour service that is installed in the background and set to "Automatic" when installing certain 3rd
party applications. Apple applications like iTunes and Adobe applications like Acrobat Professional and Creative Suites have been known to cause this problem. I've also seen virtualization software like VMWare and VirtualBox cause similar issues
with network adapters.
The solution in most of the cases I've come across has been to stop and disable the Bonjour service. The Bonjour service also masquerades as a service with a name of the format "##Id_String1.6844F930_blahblahblah". Here's how to disable this service
in Windows 7:
Right-Click on Computer > Select 'Manage'
Expand the 'Services and Applications' section in the bottom of the Left-Nav dialog and Select 'Services'
Sort the Services list by name and look for either "Bonjour" or the "##Id_String..." name mentioned above
Right-Click on the service and select 'Properties'
Click the 'Stop' button to stop the service
Select 'Disabled' from the 'Startup type' drop down list
Click 'Apply' and then 'OK'
Reboot your machine and see if the "Multiple Networks" issue is resolved. If so, you should have internet connectivity again.
Hope this helps.
cheers,
Aaron

Cannot find the Novell Connection Manager for LDAP

Novell Connection Manger for Java/LDAP
Cannot find the Novell Connection Manager for LDAP in download
I am trying to connect through a Java client to the Apache Directory Studio, LDAP server....I have downloaded the classes from the download page...see link below...but I can't see the NovellConnectionManager Class anywhere in this download when I use the open freely application to view the jar details.
LDAP Classes for Java
Environment: Windows 7

Hi MentalSuplex, and a warm welcome to the forums!
Don't know about Airport cards for it, but other options...
http://eshop.macsales.com/item/Sonnet%20Technology/N80211PCI/
Maybe this one, ask them...
http://eshop.macsales.com/item/Newer%20Technology/MXP802NPCI/
I use these...
http://eshop.macsales.com/item/Newer%20Technology/MXP2802NU2C/
http://eshop.macsales.com/item/Edimax/EW7711UMN/

HT201210 I have just downloaded ios7 and have lost my iMessages it keeps asking me to sign in which aim doing then says cannot sign it network connection error try again later even though I have full gone and wifi signals please help

I have just downloaded ios7 and have lost all use of my iMessage I have reset all my settings but still nothing. I have entered my apple ID as requested but keep getting a message saying cannot sign in network connection error try again later even though I have full phone and wifi signals. Please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

What is the optical output bit/sample rate of an Apple TV3 when using the wired network connection. 16/48 or 24/48.

What is the optical output bit/sample rate of an Apple TV3 when using the wired network connection. 16/48 or 24/48.

It doesn't matter what type of network connection it has its output is 16/48.

Utilizing both wired network connections

Hello,
Is it possible to utilize both wired network connections on a Mac Pro? What I need to do is connect 5 Mac Pro computers to each other via a Cisco switch and use file sharing to connect between them and transfer files. Also, the other network connection needs to be connected to our corporate network - email, internet, connecting to servers not associated with the other network connection. The second network connection is already in place, and I need to now connect the 5 Mac Pros. How do I set this up in OS X? Is it possible? Thanks.

Hi RoyJames,
What type of device are you trying to connect to the printer? It is possible to have the printer connected via USB for one device and connected via network for another.
Hope this helps.

Cannot find tab to connect to internet with nokia ...

hi, i cannot connect to the internet, the book isnt clear, i,ve played around with phone but cannot find where i connect to put the internet password in

Better if you can be a bit detailed.
Are you trying to connect to internet using Wifi or Mobile Data?

Apple TV2 can't find my network connection after recent update?

Why can't my Apple TV2 can't find my network connection after recent update?

I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

Stream 11: Cannot find Wifi Network anywhere to connect to wifi

I was able to connect to the internet without a problem for the past 2 months.One day it just lost my wifi connections. When I go into the the network connections there is nothing showing for the wifi connections. (Windows did not detect any networking hardware) What am I supposed to do to detect my wifi???

Hello jacbar,
Thank you for providing all the information about what is going with the Wi-Fi issue you are experiencing on your MacBook Pro. I found an article with some steps you can try to help with this issue.
I recommend reviewing the solution under the section titled "Symptom: My Mac does not connect to the Internet" in the following article (the title doesn't say OS X Mountain Lion, but the article also applies to 10.8):
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Powerbook cannot find wired network connected HP Photosmart C7280

Similar Messages

Maybe you are looking for