Powerbook cover won't latch properly

Hi, I've searched thru the forum for PB Screen Cover Latch problem.
Tried some suggestion like tap the Screen cover to close the lid but still it does not close and I have to force it down to close it.
Previously, I have problem closing as the latch doesn't seems to be able to get locked by the bezel. URGGH!!! Frustration!!!
So I have to always press the push button to close the screen cover. End up, now the screen cover would not close at all..
Wat should I do?
Instead of send for repair, (of cos, as per read from MUGS forum, such exterior does not cover under warranty).

This is very common, and I wonder if every Powerbook has this issue, particularly the 12-inch.
Mine usually works, if I'm latching it on a level surface, but otherwise, it likes to pop back up. However, on a level surface, it usually stays put. If yours never closes properly, you should contact Apple Care.

Similar Messages

Album Cover won't display properly

I just purchased a TV Season of a show, and every episode downloaded properly, but the Album Art cover does not display correctly. I really hope I don't have to delete, and purchase this season again. Has this happened to anyone else? How is there a way to fix it?

I have a 9 GB iPOD touch and this very thing happen to me. I can see the artwork via iTUNES but some of the artwork would not transfer to the iPOD. When looking at the album covers on the iPOD you'd just get a blank area where the album artwork would be.
I was unable to find any place inside of iTUNES or on my iPOD that would allow me to select or deselect artwork artwork as has been stated above.
My solution was to do a restore to factory settings. After I did this and did not use the back up... that may have been messed up too... All my artwork was there and the iPOD seems to be acting much better... it was sluggish after I updated to 2.x
Anyway if anyone is having issues and you have not resolved it try doing the restore as if it was a new iPOD.

Powerbook G4 won't wake up from sleep

My 4 1/2 year old powerbook G4 won't wake up from sleep anymore. After I close the lid, or even manually put it to sleep, I can still hear the HD run. The backlight on the top of the lid never lights up and when I open the lid the blank screen doesn't do anything. The only way for me to work around this issue is to power down the laptop and start it up again. Since I've been having this issue every program that I use take forever to load. The spinning color wheel is the bane of my existence! I tried resetting the PRAM, I used Onyx to repair file permissions, and am out of ideas. Any help would be greatly appreciated.

How incredibly strange. I am having exactly the same problems with my computer. I just started the same behavior today. I have tried using MacJanitor, repaired permissions, verified disk, but it still will not go to sleep properly. S.M.A.R.T status is verified
I have tested my RAM as described above with no problems surfacing. Anyone else have any ideas that we can try. When I get home on Sunday I will try some more intense investigative tools including re-installing OSX 10.5
By the way, I am running 10.5.4 on a 15" 1.5Ghz G4 Powerbook with 1.25GB of RAM and 28.9GB harddrive free.
Another strange thing I have also observed is that it now takes 10 minutes to start up. 5 minutes on the Apple screen with pinwheel, and then 5 minutes with the blue screen before the cursor appears. After that point startup is normal. Also, even though Disk Utility shows 28 GB free on my harddrive when I try to copy something, it says that I do not have enough free space on my harddrive.
Do you suppose this means that my harddrive is on the way out? Is this also the case of the original poster?

My iPhone 5 won't charge properly, computer doesn't recognise it and the home button has stopped working completely, it hasn't been dropped or water damaged at all, any ideas?

My Iphone 5 won't charge properly, computer won't recognise the device and also the home button has stopped working completely, it hasn't been dropped or suffered any water damage, anybody else had anything like this? and what are the solutions? thanks

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

HT1353 Ipod won't sync properly and refuses to play certain songs

My Ipod Nano 5th gen won't sync properly and when I choose a song it shows the title of a different song and plays a song different to the song title shown or chosen.

What do you mean it won't sync properly? Do you get any error messages in iTunes?
Have you tried any of the usual 5 R's of troubleshooting yet?
http://www.apple.com/support/ipod/five_rs/nano5gen/
B-rock

IPhone 4 battery dies quickly, won't charge properly and is very hot!

Hi, my iPhone 4 won't charge properly and the battery drains really fast plus the handset is very hot. Does it need a new battery?
It just suddenly started happening yesterday before lunch and hasn't been right since! I haven't done any software updates or anything that could cause it. I e tried deleting my mail accounts, turning phone off and re installing them as suggested in one post but that didn't work!
Thanks

Hi emma.s,
You may want to take a look at the Power/Battery section of the following article for more information:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden

IMovie won't open properly

iMovie won't open properly. I tried reinstalling it and it still won't open. Any ideas? I attached a screenshot so you can see what I'm talking about.

27/05/14 19:18:32,173 iMovie[328]: Could not find image named '7F966C8D-418D-4C52-AEFB-2D79E62891BF'.
27/05/14 19:18:32,173 iMovie[328]: Could not find image named '41D5459D-E1BC-42EB-98D0-4D869675F009'.
27/05/14 19:18:32,174 iMovie[328]: Could not find image named '5924A8AF-43E5-4311-94CA-8E074F69A928'.
27/05/14 19:18:33,512 iMovie[328]: *** -[__NSSetM addObject:]: object cannot be nil
27/05/14 19:18:46,227 mds[61]: (Normal) Volume: volume:0x7fe6530d4000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.akuMF9
27/05/14 19:21:40,034 Console[363]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
27/05/14 19:21:48,602 iMovie[366]: Could not find image named '7F966C8D-418D-4C52-AEFB-2D79E62891BF'.
27/05/14 19:21:48,603 iMovie[366]: Could not find image named '41D5459D-E1BC-42EB-98D0-4D869675F009'.
27/05/14 19:21:48,603 iMovie[366]: Could not find image named '5924A8AF-43E5-4311-94CA-8E074F69A928'.
27/05/14 19:21:49,754 iMovie[366]: *** -[__NSSetM addObject:]: object cannot be nil
This is what I get when I try to open iMovie. I also tried deleting the prefecences and it didn't change anything.

Mac won't boot properly unless in safe mode

Recently I updated my MacBook Pro to OS X Yosemite. I then started the process of the data encryption.
I don't know what happened, but maybe the encryption failed, because now every time I turn my mac on, it won't boot properly unless it's in safe mode.
Either it will have a black screen with a visible cursor, or just the desktop with no dock or the bar along the top and no icons, or it does boot up properly, but works extremely slowly. Like if I was to press the apple symbol on the top-right of the screen, it would take 5 minutes to actually open it. Nothing works properly.
And so I opened up my system preferences, and discovered that the Encryption is stuck on half-finished. But I can't stop it. If I try to turn encryption off it says I have to wait till it's finished. But it never does, the progress bar never moves.
If I open System Preferences while in Safe Mode, the progress bar for Encryption is grey, and underneath it says "connect to power to continue encryption". But it IS connected to power.
Have I stuffed my Mac? Is there a way to get it working again?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook Pro won't sleep properly.

Hello;
I have a problem with my mid 2009 13'' MacBook Pro that won't sleep properly.
Whenever I close the lid, or chose ->Sleep, it takes a few seconds and the system sleeps (fan off, led fading off) , but INMEDIATELY after just a few miliseconds, the system wakes up again (fan on, led on, hdd spinning).
This sequence happens again and again indefinitely (sleeps / wake / sleeps / wake, and so on...)
Then I open the lid and everything works as expected.
So far I tried all this, with no luck:
- I've installed a clean Mountain Lion from scratch.
- The system is untoched: no new apps installed, no new drivers installed.
- All sharings are disabled.
- Bluetooth is disabled.
- Infrared port is disabled.
- There's nothing attached to the computer except from the magsafe cable.
- There are no background processes preventing the system from sleep (checked using "pmset -g assertions")
- There is no disc loaded in the optical unit.
- "Wake for network access" is disabled in Preferences->Energy Saver.
- SMC y PRAM reseted several times.
As you can see, I don't know what else to try...
I would REALLY appreciate any help or suggerence.
Thanks in advance,
Nicolas.

A SMC will not have any results with this, in my past experince. Surprisingly the loginin items is the usual culprit. Try option, command, delete (don't hold these keys ,just press them)and wait till it goes to sleep, and stays that way. Then if it stays aslep try closing the lid. Disconnect all peropherals. Try system preferences>energy saver, make sure comouter sleep is ot set to never, as well as the display on both power adapter and battery. On the same pane, click schedule and make sure the start up or wake is not clicked. Also try a Ssfe boot: Power off, power back on holding the shift key, coninue to hold the shift key till you see the progress bar.This will disable all 3rd party software (it some times fixes some stufff) try the sleep menu under the Apple, or the option,command,delete. Hope this offers some help. If yourMBP is new, less thsn 1 year old, or you have Applecare, I would let them deal with it. You have a warranty,USE IT! All the best
Close all applications/operations.
You ca try a pram reset for the heck of it, in case there is somrthing strange in there that needs to be flushed.
Pram reset: Power off, power on, hold the following keys before the start chime. option,comman,P,R (no commas) and continue to hold the keys till you hear thestart chime 2 times then relesase.Reboot.
Good luck

Google Chrome won't open properly in Lion

I have just upgraded to Lion and I am having a number of difficulties, my BTYahooo home page won't display properly in Google Chrome browser, even though it will in Safari. I also used to be able to get Dock Art working with itunes but it has now stopped working, apparently I have to down grade to 32 bit, however I do that? can this be right, I have to downgrade the whole of itunes to get it to use this feature?

Not sure what you are seeing, but Yahoo Home page looks like this here in Chrome:
Pretty darn interesting, that shark encounter.
On any addons to iTunes or other Apple apps, you will have to wait until the 3rd party supplier updates the app to work correctly. Should not be too long, as most developers want to eat at the end of the month.
Cheers!

Photo page won't display properly in safari

Hi everyone!
I'm completely new to building websites and need some of your expert advice?
For some reason my photo pages won't display properly in Safari but ok in Firefox?
It worked fine a week ago and I can't think what I've done wrong since I republished last night?
http://www.abeledo.talktalk.net/losavellanos/House.html
Can anyone help?
I'll buy you a pint!
Cheers

No luck unfortunately.
I changed the background to a solid and made the changes that you suggested roddy, but neither seemed to work. I know I must be doing something wrong? Do the photos appear ok with you roddy? All I see, is half the page i.e nav bar, top image, 'the house & garden etc text and top half of the darker box where the thumbnails should appear. And this happens with all 3 photo pages currently on the site.
http://www.abeledo.talktalk.net/losavellanos/House.html
http://www.abeledo.talktalk.net/losavellanos/Teror.html
http://www.abeledo.talktalk.net/losavellanos/The_Island.html
I've been clearing my cache in both browsers every time I republish.
I've also tried upgrading to the new 3.0.3 beta Safari? You'd think - out of all the browsers- iWeb would work seamlessly with Safari wouldn't you? - Firefox is fine.
Do you think I should start from scratch?

Why won't my album cover won't show on my iPod touch 4g or my computer?

Why won't my album cover won't show on my iPod touch 4g or my computer?

Delete the songs with no artwork on your iPad and resync your music from iTunes on your computer.

Flash content won't hide properly

I have four DW layers on top of each other, two of which
contain flash content - I have had to set wmode to 'window' in
order to make the movies work in Firefox.
This means however that when I load the page the movies flash
up on screen whilst they are loading before disappearing even
through they layers in which they are contained are set to hide
onLoad (z index has no effect)
I hope this makes sense - does anyone have any ideas ?
http://www.drawbox.co.uk/knoll/design3/page1.html

What exactly do you mean "won't install properly"?

Charging flap won't close properly

Hi all,I've had my Xperia Z for about two months now, great phone very happy with it except for this nagging issue. The waterproofing flap on my charging port won't close properly any more, everytime I close it the flap would pop out again after about 30 seconds. It's quite annoying to have it flapping about all the time but obviously it also means that my phone is no longer waterproof. The flap itself looks like new and the seal hasn't been damaged or anything, it just wouldn't stay in place. Is this a common problem? Should I send it back for a replacement?

I got the same issue on my very new ZR (2 weeks).At first I found the flap quite efficient then I started to play with my new toy so I charged a lot, forgot about the flap... Now that my usage is more reasonable, I noticed the flap start to pop up after a few second. It stays inside but clearly it s no more waterproof and above all it s UGLY! I tried to clean the port as advised in another post on xperia care but it was only a bit better.Wait a few second and it s out. I think it comes from the connection between the port and the small rubber/plastic oval that enable the water protection. As cleaning with towel... didn't work, I took a small sharp knife and I gently rubbed the rim of the usb port on the phone.Of course be very careful. I did it very gently with no real hope it will work (I was ready to go to sony). I just wanted to be sure it was total clean and finaly................ it worked for me! I just hoped I won't need to do that too often...

Won't start properly because of too much stuff on desktop - how do I delete stuff if it won't start up now?

I was trying to move photos to an external hard drive because my startup disk was full and I accidentally dropped them onto the desktop. Now my computer won't start properly because of all the stuff on the desktop and I don't know how I can fix that?

Start up in safe mode. Hold the Shift key while your Mac is starting and check that you can start up in safe mode. Then, choose all the items you want to transfer in Desktop by pressing Command and A keys, and move them to the external drive.
If you have any file in Desktop that you don't want to transfer, simply click it while pressing the Command key

Powerbook cover won't latch properly

Similar Messages

Maybe you are looking for