Powerbook does not sleep when the lid is closed
my tibook does not go to sleep when i close the lid. the screen stays on when the lid is closed. the screen was replaced a few months ago. i have to hit the power button and choose sleep or choose sleep from the menu. does anyone know how to fix this. Thanks.
Hi, fatchance. You have a hardware issue. The reed switch that puts the PB to sleep when it is closed is a two-part device. The latch mechanism in the main body of the Powerbook contains a magnet (which you can detect by moving a paper clip over it), and the switch itself is located inside the small latch opening in the display bezel. When the display is closed, the magnet is supposed to actuate the switch, putting the PB to sleep. If that isn't happening on your PB, the switch is broken or its wiring is damaged. Either way, the remedy will be to replace the entire display assembly. It's made not to be disassembled. Most technicians won't do so, because of the great likelihood of damaging the display housing/bezel or the display itself while prying it apart (it's epoxied together). Since the display is the PB's most costly part, replacing it merely to fix your reed switch would be a poor bargain, and I can't recommend it. Just put the PB to sleep manually or set a suitable sleep delay in the Energy Saver control pane instead.
Similar Messages
-
Macbook air's fan not turning off and it will not sleep when the lid is closed?
I downloaded OS X Mavericks yesterday.The fan will not turn off. It runs whenever i turn on the computer. The computer does not turn off when i close the lid, and the fan still runs. There is also no battery icon anymore on my home screen. Is this just a bug with Mavericks? My computer is a mid 2012 edition.
Resetting the System Management Controller
-
[SOLVED]Gnome 3.4 is not suspending when the lid is closed.
Hey..
Since upgrading to gnome 3.4.1, my laptop does not suspend when the lid is closed.
I have read this this thread without getting a clear answer...
I have checked the setting in gnome tweak tool, and they are both set to "Suspend"
The laptop has no problem suspending, if i run the command, or choose the option in the menu to the right.
Is this a bug ?
What can i do to fix it. ?
Last edited by Munken (2012-06-20 05:54:08)See this thread for updates on the problem.
-
T540p will not go to sleep when the lid is closed
I recently got a T540p and all settings in Windows 8.1 are set to "sleep" when either the power button or lid is closed. Neither of these work, the screen stays on when the lid is closed. If I let the computer idle long enough, the computer will enter sleep. I've used Lenovo System Update to get the latest drivers and there is nothing outstanding. Could someone please advise if there is anything else to check?
Hi Adamstirtan,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not going to sleep mode on your ThinkPad T500.
Go to Control Panel\All Control Panel Items\Power Options\Choose what closing the lid dose – When close the lid – On battery sleep – Plugged in sleep.
To prevent programs from waking your computer:
Open Power Options by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Security, and then clicking Power Options.
On the Select a power plan page, click Change plan settings for the plan that you want to change.
On the Change settings for the plan page, click Change advanced power settings.
On the Advanced settings tab, expand Sleep, expand Allow wake timers, choose Disable for both when your computer is running on battery and when it's plugged in, and then click OK.
Hope this helps.
Best regards,
Hemanth Kumar -
My iPad will not sleep when the cover is closed. Thus, the battery runs down quickly.
My iPad will njot sleep when the cover is closed. Thus, the battery runs down quickly.
Check that Settings > General > Lock / Unlock is turned ON
-
X120e does not sleep when lid closed
I found another similar post, however it was resolved by the individual reinstalling the operating system.
My issue is more complicated. I have made sure everything is up to date, all the settings that tell the system to sleep when the lid is closed are turned on. I have even turned those settings off off, just so I could turn them back on to make sure there wasn't something quirky about it.
I have tried restoring the system to factory settings using the recovery partition, as well as discs burned from the program that came with the computer. I have tried clean install from Windows 7, 8, and 8.1 discs.
The unit still does not sleep. I don't ever remembering it being able to. I once closed the display thinking it would sleep (power was plugged in). Woke up the next day, went to work for 8 hours, came back and felt that the system was really hot. Opened the lid and the screen was exactly as I had left it the day before.
When I first got the system in 2012, the screen did not work, so I actually had to send it to Atlanta, GA for repairs. It came back quickly, and it still did not work, so I actually sent it back to Atlanta, GA's repair center a second time in the same week. It came back working and I left it alone. I never tested the sleep/wake because I always just turned the system off when I was done with it, but now I am back in school and this little computer comes in handy, but I don't want to turn off the system manually going from class to class when I need to pack it away in my bag.
Could there be a hardware issue? Something inside not connected? This laptop works perfectly EXCEPT for the fact that it will not sleep when the lid is closed. It is out of warranty but had I known this was an issue while it was still under warranty, I would have inquired. This unit is in pretty fantastic shape, looks brand new too. No damage, never been dropped, and only ever handled by me (never loaned out).
How can I fix this?Thanks for the reply, gat0gelat0.
Yes, those settings were the first things I checked. I also tried changing it to "Do nothing", then changing back to the sleeping option. It still does nothing when I close the lid.
I would like the functionality of it going to sleep when I close the lid for the convenience, like when class ends, I have to rush to my next class, I just want to close the lid, put it in my bag and run to the next class. Keyboard shortcuts like Fn-F4 work, but this laptop should have the functionality I am describing, and I want to figure out why it isn't working and how to fix it.
I suspect there is an issue with whatever is used hardware wise to sleep the machine. Either it's not being triggered, or it's not there, or it's broken. I've tried running a magnet around the bezel of the LCD screen as well as around the palm rest bezel and there is no activity as I've read that many laptops trigger sleep by interaction by a magnet. Still nothing. -
MBB Does Not Sleep When Lid Shut
My macbook does not sleep when I shut the lid. This happened recently after I had my fan repaired. I also updated the OS at the same time, so I'm not sure which triggered the problem.
I would have to manually select sleep before shutting the lid; and I would have to press the space bar after I've opened the lid to wake it.
The following thread applies to a MBP. Apparently my problem might be a faulty latch.
http://discussions.apple.com/thread.jspa?messageID=5325605&tstart=0
I've reseted my PRAM, but that didn't work. My machine has been in for repairs 4 times (Fan, Logic Board, and the top case has been replaced twice due to cracks).
I'm wondering if I should send it back to the service centre to have it looked at. Apparently, if this is not a hardware problem, it won't be covered under AppleCare, and I would be charge. So just want to make sure...I tried doing this fix using the guide on http://ifixit.com to dismantle my MacBook and find the battery/lid detector cable which indeed seemed loose at its connector just next to the headphone jack, but when I reassembled the mac still does not detect lid closing and now it doesn't even detect the battery anymore! Yikes! Looks like a trip to the apple store is required anyway.
-
My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and in use.
My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and I am actively using it. This problem happens both with OS X 10.7.2 and Windows 7 (64bit), so I don't think it's an OS issue. Has anyone else encountered this? It's still covered under apple care... But I'd rather try to fix it myself before having to bring it in.
Thanks!I wouldn't be surprised if this were the case - it does get hot. However, this happens even when I first open it after having it in sleep mode for an entire night... Do you know how to run the diag tool with OS X 10.7?
-
My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.
That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.
-
My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.
Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling -
hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is lockedsounds like a hardware failure. Return the phone to Apple.
-
My macbook pro shuts down OSX and all my programs when the lid is closed
Hi,
I am having a problem. My macbook pro shuts down OSX and all my programs when the lid is closed. I close the lid, and then I hear the shutdown music and then when I open it again it automatically restarts OSX and all my windows and programs are closed, any info gone.
This doesn't happen all the time. Just once a day or maybe twice a day. It seems like it happens basically when I have my computer just the way I want it, to keep an eye on things for the day.
I just recently switched to a mac and while somewhat savvy, I am not a programmer or techie, but it seems to me that when I shut the lid, it should do the same thing every time.
I have a intel core 2 duo 17 inch macbook pro with 2.33 processr and 2 gig ram, if that helps.
I am in alaska and there is no genius bar here and I am hoping to figure this out before I begin bugging our local independant mac store about this.
Thanks in advance,
Lylah
17 inch Macbook Pro Mac OS X (10.4.9) intel core 2 duo 2.33g. 2 gig ramAhhh, enlightenment!
That would make sense. What I usually do, after closing the lid, is to wait for the apple to turn off and then set it down on it's side leaning it against the side table. I will try to wait for it to indicate that it is fully asleep before I move it next time. Personally, I prefer my computer to NOT fall asleep at all, but I am told it is not an option. Apparently this function is hardware related accoring to my local mac shop. They tracked it down for me because I hated this feature when I first bought my computer and was trying some way around it.
The shutdown music I was refering to was that music the mac makes when shutting down, which doesnt usually occur when it goes to sleep, unless it is malfunctioning like this.
What does resetting the pmu do? (what is a pmu as well?)
Thank you very much.
Lylah -
I just updated to 10.8.2 and now i can no longer wake my macbook froom standby when the lid is closed, it directly goes back to sleep
steps to reproduce:
1. attach secondary monitor and keyboard
2. close lid
3. wait 5 seconds for going to standby
4. press any key on keyboard and type in user-credentials (notice how the 2nd monitor becomes the mainscreen)
5. wait 5 seconds
6. standby again
side note:
i also have sudo nvram boot-args="iog=0x0" enabled, because i like to not use the integrated screen when its attached to a secondary screen, but since it goes back to standby right after login this is pretty much pointlessSame here, I think changed something in 10.8.2 that wrecked the "Open-MBP Clamshell Mode." sigh
-
System always auto-suspends when the lid is closed
Hello,
I am trying to prevent my laptop (a System76 Lemur Ultra 3) from suspending when the lid is closed. No matter what I change in the configuration, the laptop always suspends when the lid is closed. The output of journalctl is as follows after this happens:
Feb 21 04:35:32 hostname systemd-logind[196]: Lid closed.
Feb 21 04:35:32 hostname systemd-logind[196]: Suspending...
Feb 21 04:35:32 hostname systemd[1]: Starting Sleep.
Feb 21 04:35:32 hostname systemd[1]: Reached target Sleep.
Feb 21 04:35:32 hostname systemd[1]: Starting Suspend...
Feb 21 04:35:33 hostname systemd-sleep[2001]: Suspending system...
Feb 21 04:35:33 hostname kernel: PM: Syncing filesystems ... done.
Feb 21 04:35:33 hostname kernel: PM: Preparing system for mem sleep
Feb 21 04:35:43 hostname kernel: Freezing user space processes ... (elapsed 0.06 seconds) done.
Feb 21 04:35:43 hostname kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 21 04:35:43 hostname systemd[1]: Time has been changed
Feb 21 04:35:43 hostname systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Feb 21 04:35:43 hostname systemd-logind[196]: Lid opened.
Feb 21 04:35:43 hostname acpid[190]: client 1812[0:100] has disconnected
Feb 21 04:35:43 hostname kernel: PM: Entering mem sleep
Feb 21 04:35:43 hostname kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 21 04:35:43 hostname kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 21 04:35:43 hostname kernel: sd 0:0:0:0: [sda] Stopping disk
Feb 21 04:35:43 hostname kernel: PM: suspend of devices complete after 1092.547 msecs
Feb 21 04:35:43 hostname kernel: PM: late suspend of devices complete after 0.556 msecs
Feb 21 04:35:43 hostname kernel: jme 0000:03:00.0: wake-up capability enabled by ACPI
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Feb 21 04:35:43 hostname kernel: PM: noirq suspend of devices complete after 66.095 msecs
Feb 21 04:35:43 hostname kernel: ACPI: Preparing to enter system sleep state S3
Feb 21 04:35:43 hostname kernel: PM: Saving platform NVS memory
Feb 21 04:35:43 hostname kernel: Disabling non-boot CPUs ...
Feb 21 04:35:43 hostname kernel: smpboot: CPU 1 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 2 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 3 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 4 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 5 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 6 is now offline
Feb 21 04:35:43 hostname kernel: smpboot: CPU 7 is now offline
Feb 21 04:35:43 hostname kernel: Extended CMOS year: 2000
Feb 21 04:35:43 hostname kernel: ACPI: Low-level resume complete
Feb 21 04:35:43 hostname kernel: PM: Restoring platform NVS memory
Feb 21 04:35:43 hostname kernel: Extended CMOS year: 2000
Feb 21 04:35:43 hostname kernel: Enabling non-boot CPUs ...
Feb 21 04:35:43 hostname systemd-sleep[2001]: System resumed.
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
Feb 21 04:35:43 hostname kernel: CPU1 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4
Feb 21 04:35:43 hostname kernel: CPU2 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6
Feb 21 04:35:43 hostname kernel: CPU3 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 4 APIC 0x1
Feb 21 04:35:43 hostname kernel: CPU4 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 5 APIC 0x3
Feb 21 04:35:43 hostname kernel: CPU5 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 6 APIC 0x5
Feb 21 04:35:43 hostname kernel: CPU6 is up
Feb 21 04:35:43 hostname kernel: smpboot: Booting Node 0 Processor 7 APIC 0x7
Feb 21 04:35:43 hostname kernel: CPU7 is up
Feb 21 04:35:43 hostname kernel: ACPI: Waking up from system sleep state S3
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Feb 21 04:35:43 hostname kernel: ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Feb 21 04:35:43 hostname kernel: PM: noirq resume of devices complete after 133.251 msecs
Feb 21 04:35:43 hostname kernel: PM: early resume of devices complete after 0.425 msecs
The first thing I did was to disable systemd's acpi features by setting /etc/systemd/logind.conf as follows:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
IdleAction=suspend
IdleActionSec=45min
However, the behavior was the same as before. I also tried setting
LidSwitchIgnoreInhibited=no
but after reading man 5 logind.conf it seems that this is unnecessary (and it had no effect when I tried it).
acpid is also installed but I have commented out the contents of /etc/acpi/handler.sh as well as all the scripts in /etc/acpi/actions. I noticed that there is also a UPower daemon which was installed as a dependency and thought that it might be triggering the suspend. I tried setting
IgnoreLid=true
in /etc/UPower/UPower.conf but this also had no effect.
systemctl list-units has the following output:
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1b.0/sound/card0
sys-devices-pci0000:00-0000:00:1c.2-0000:02:00.0-net-wlan0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/net/wlan0
sys-devices-pci0000:00-0000:00:1c.3-0000:03:00.0-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/net/eth0
sys-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.2-2\x2d1.2.1-2\x2d1.2.1.1-2\x2d1.2.1.1.1-2\x2d1.2.1.1.1:1.2-sound-card1.device loaded active plugged 0819
sys-devices-pci0000:00-0000:00:1d.0-usb2-2\x2d1-2\x2d1.2-2\x2d1.2.1-2\x2d1.2.1.3.device loaded active plugged Deskjet_5400_series
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata3-host2-target2:0:0-2:0:0:0-block-sr0.device loaded active plugged TSSTcorp_CDDVDW_SN-208AB
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-net-devices-eth0.device loaded active plugged /sys/subsystem/net/devices/eth0
sys-subsystem-net-devices-wlan0.device loaded active plugged /sys/subsystem/net/devices/wlan0
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
media-usbhd\x2dsda1.mount loaded active mounted /media/usbhd-sda1
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
cups.path loaded active waiting CUPS Printer Service Spool
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
acpid.service loaded active running ACPI event daemon
atd.service loaded active running ATD daemon
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
laptop-mode.service loaded active exited Laptop Mode Tools
polkit.service loaded active running Authorization Manager
postfix.service loaded active running Postfix Mail Transport Agent
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
upower.service loaded active running Daemon for power management
wicd.service loaded active running Wicd a wireless and wired network manager for Linux
acpid.socket loaded active listening ACPID Listen Socket
cups.socket loaded active running CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
printer.target loaded active active Printer
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
suspend.target loaded active active Suspend
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
74 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Any ideas on what might be causing the system to suspend when the lid is closed would be appreciated.
Thanks
Last edited by Superposition (2013-02-21 15:48:06)qinohe wrote:You don't have to disable acpi!
Since you made the complete switch to systemd, why not let systemd handle this kind of events?
I was referring to the suggestion of setting acpi=off on the kernel line. systemd can only run a few preset actions on events like lid close (e.g. suspend, poweroff, ignore, etc.). I need to run custom scripts. Also, for some reason I still do not fully understand, it was not working properly. The log in my original post seems to show that it was initiating the suspend.
qinohe wrote:
progandy wrote:Yes, it is easier, but my laptop should react differently depending on the power source. With AC power lid-switch locks the screen, in battery mode it suspends. That is impossible with systemd.
Yes you need something like laptop-mode-tools for that, I know systemd will not do that, for now.
But that is not the issue here!, the issue here is that the llid-switch-button' shouldn't be used at all.
For as far as possible I would still recommend systemd to handle your events!, but it's your decision finally!
You need acpid for that not laptop-mode-tools. This is exactly what apcid is for --- running user scripts on ACPI events.
Anyway, I finally have this fixed though I still have no idea what the problem was. I ran out of ideas on how to fix it and #archlinux didn't know either so I went the painful but sure route. I did full reinstall and reinstalled all programs. logind was still behaving as this point (not ignoring it's logind.conf file as it seemed to be before the reinstall) after this so I concluded that the packages installed were not the problem at least with their default configs. After that, I gradually restored the config files I cared about while testing to see if logind still worked correctly. Contrary, to what I expected it never broke and I was able to restore all modified configs and get correct behavior.
I suspect there was some old out of date config file somewhere that was causing the problem but it's hard to say which one it was. I could probably figure it out with a bit more experimentation but have already spent enough time fixing this...
In case anyone else needs a similar configuration, the relevant files are as follows. This sets up the system to lock whenever systemd executes a suspend action. It also sets up acpid to suspend on lid close.
Make sure you have installed acpid and enabled it to run at startup.
/etc/systemd/logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
/etc/systemd/logind.conf
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
/etc/acpi/handler.sh
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
/usr/bin/systemctl poweroff
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
/usr/bin/systemctl suspend
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
/usr/sbin/laptop_mode auto
00000001)
logger 'AC pluged'
/usr/sbin/laptop_mode auto
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
/usr/sbin/laptop_mode auto
00000001)
logger 'Battery offline'
/usr/sbin/laptop_mode auto
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
/usr/sbin/laptop_mode auto
if [ $(cat /sys/class/power_supply/ADP0/online) -eq 0 ]; then
/usr/bin/systemctl suspend
fi
open)
logger 'LID opened'
/usr/sbin/laptop_mode auto
logger "ACPI action undefined: $3"
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
Last edited by Superposition (2013-02-23 23:15:54) -
Can i choose the resolution of my external display for when the lid is closed when my lid is open
When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?
Hi there, I had a similar problem and was unable to resolve it. I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck. It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.
Maybe you are looking for
-
My computer has crashed. I can't even turn it on. Now I want to sync my iphone4s with a new library (one which I have created at work), but I don't want to lose what is on there already from my old computer. HELP!!!!
-
The equivalent of ajax httpRequestObject in JSP
hello, i am asking if i can get some data from a servlet within a jsp. like in ajax, i send a request to the servlet then getting the required data from the servlet.i want to do the same thing but with java, giving the url of the servlet and getting
-
No password prompt during fedora 10 install
Hello - I recently installed Fedora 10 for the sole purpose of installing Oracle XE (so I am completely new & inexperienced with both) When I installed Oracle XE I was not prompted for any sort of passwords. I installed Oracle using the Fedora GUI by
-
Can I use anther computer to recver my apple ipod 5 touch screen
I for got my iPod 5 touch screen pass code and I am trying to recover it from another computer can I do that
-
Change Source System client for BI datasources
Friends, We have created/migrated datasources in QA system using existing SAP Source System, for example, ECC Client 320. Now we want to change the SAP Source System to the different client, for example, ECC Client 330. All datasources are already