Powerbook G3 Not Booting From Install Disk.

I'm having trouble booting from my OS X install disk and installing OS X 10.4. Any idea why? It a Pismo 500, with 512 MB of RAM

Is your Tiger install DVD a retail version (black with silver X) and not a model specific version (gray) (See Can I use another Mac's system restore disc on my Mac? ).
Does you Pismo's disc drive read DVDs? What happens when you try to boot using the installer? What OS is your Pismo currently running?
 Cheers, Tom

Similar Messages

  • Macbook Pro will not load OS and will not boot from Install Disk

    When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
    synchronizing disks... Killing processes
    then it says some other stuff to fast to read.
    When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
    Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
    Not sure if I left anything out
    -bryce

    Welcome to Apple Discussions.
    Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
    Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
    Message was edited by: Rick Lang

  • Will Not Boot from Install Disc  & 4SNS/1/40000000: TG0D - Thermal Sensor?

    *Will Not Boot from Install Disc*
    I used the "option key" approach with the gray start up disk. At first it ejected the start up disk. Then I nudged the disk back in the machine and it showed on the screen as an option. I clicked on the start up disk image and it finally loaded.
    But, it won't accept the start up disk when holding down the "C" key at restart.
    *4SNS/1/40000000: TG0D*
    I did an Apple Hardware Test and received the following diagnostic:
    Version: 3A121
    Test Suite: Extended Test
    Loop Count: 2
    Result: Failed
    Failure code: 4SNS/1/40000000: TG0D
    *Thermal Sensor*
    A search for the failure code 4SNS/1/40000000: TG0D brought up an Apple Discussion topic entry stating: That error code indicates a problem with a thermal sensor. It could be not working or possibly not connected. You will need to take it to Apple for repair.
    Would a thermal sensor have anything to do with it not starting up when holding down the "C" key at restart? What are thermal sensor problem symptoms?
    *User File Folder Opened Up*
    The machine also starts up with my user file folder opened up rather than with a blank screen as it normally should
    I completed a DiskWarrior rebuild on the disk and verify disk shows it is fine.
    Any suggestions on what to do next with these issues?

    The answer was in your post: "You will need to take it to Apple for repair."

  • Ibook g4 won't boot from install disks

    Got an ibook g4 1.33 ghz combo drive from original owner w/install disks. I want to reinstall original system but it won't boot from install disk 1. Tried starting holding down c but ignores disk. Holding down option just gives me the HD. Install disk shows up on desktop and opens. Tried disk utility from install disk but it doesn't allow me to erase the hd. Is there anything else I can do? Thanks.

    OK, so let us suppose that you have the correct disk, the possibilities are:
    • the optical drive is not functioning properly. However, since the disk shows up on the desktop the drive is apparently reading it.
    • the disk itself is the issue. It could the wrong disk, but let us assume it is not. It could be damaged so that it is no longer bootable, or it could dirty. I would begin by giving the disk a good buffing and see if that will encourage it to boot the computer.
    Good luck.
    cornelius

  • I can't boot from instalation disk need help

    can anyone tell me why i can't boot from instalation disk
    i burn a DVD with verified iso with MD5 with Nero Express

    i use burn image , of course and
    i have a Sempron +2400 with asus a7s8x mainboard
    and i download all 5 file for DVD x86 and then i copy /b all this files.
    when computer boot from cd the screen is bleu with Solaris ................ v.20 message and after 1 second message became
    Aolaris ..................v.20 and computer remain in this position

  • Macbook Pro does not boot from install CD, boots from non-apple live CDs

    This story begins with my macbook becoming entirely unresponsive while just sitting around with the desktop in focus. My current problems begin with the third of such freezing events. It felt like the hard drive had stopped responding since everything looked fine and I could move my mouse, but as soon as I attempted to access anything that depended upon the file system (ie everything not already in memory) that thing I attempted to access would freeze up as well. The only thing I can do when these happen is to force a shutdown.
    The three times I have had these problems I would be greeted with the flashing folder-and-question-mark. So, for the third time now I threw in a live CD I have and ran DiskWarrior and DiskUtility and fsck and everything I could possibly need to recover the system. Each of these programs ran through their routines and reported that it had either successfully made repairs or the disk needed no repairs and was A-OK!. S.M.A.R.T. reports that the drive is perfectly fine as well.
    Now, though, whenever I try to start up my computer I'm greeted with the normal grey apple startup image, the folder with the question mark, and also the prohibited sign (grey circle with a slash through it). This is the first time that running the disk repair programs has failed. Expecting a crashed hard drive or something equally fun I threw in the live CD again and attempted to recover my data. The thing is, I was able to navigate the file system perfectly with terminal and didn't even need any data recovery tools. So, at least my data has been safely backed up.
    I've tried booting into single user mode, but it seems that DiskWarrior helped my computer in an assisted suicide of sorts as boot.efi is sitting in a DiskWarrior recovered folder and the mach kernel has been entirely misplaced. Immediately I restart, throw in the first Macbook Pro installation CD, and hold down C in an attempt to reinstall the system.
    Here is my current problem: Whenever I attempt to boot from any of the installation CDs that came with my laptop, the laptop will begin to boot from the CD and show a grey screen as it begins reading from the disk, but before the spinning gear or grey apple appears the laptop simply restarts and attempts to boot from the disk again.
    This boot-restart process loops infinitely with every Apple-provided installation CD I have tried. The laptop never progresses past a grey screen, instead restarting and happily chiming. However, I have been able to boot from a non-Apple Live CD that I own every time I have tried; moreover, the hard drive is perfectly accessible and shows no errors from any program I run. When I hold option upon startup it shows the drive and lets me boot into it (but then the problems I have described pop up). I have also tried resetting PRAM and NVRAM with no success.
    Does anyone have any suggestions for how to boot into the live CD? Or would I be better off making sure I have backed up all of my data and then wiping the drive for a fresh install?

    I am having the exact same issue. I can only log into the system in safe mode. Holding down the Shift key when turning the machine on, until the log window appears.

  • Intel Xserve will NOT boot from hard disk drive

    I have two Intel Xserves 2.0 QC machines
    I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
    When booting from The installation DVD media
    The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
    Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
    If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
    It does show, the still inserted Installation DVD.
    I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
    I have tried different caddy postions (left, middle and right)
    I have tried bona fide Apple supplied Disk drives
    I have tried various different caddies
    I have tried installing Operating System 10.5.*  and  10.6.8 server
    I have run SMC reset and system reset
    But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
    Has anyone seen this behaviour?
    Is it fixable?
    Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
    I have now run out of ideas and cannot find any help in discussions or just googling.
    ANY help would be very appreciated
    Regards
    Tony

    Antonio Hi !
    QC = Quad core  or  QX as it is written on the "pull out" serial number tab at rear of system
    I have 3 late 2006 Intel xserves
    On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
    2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
    the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
    I have many different Caddies and these have different product/model number labels
    603-9965
    603-9545
    603-9796
    these are marked "intel SATA"
    The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb  -  all of which have been used in systems at one time or another
    and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
    Thanks for the guide - I will look through that and continue to try and find an answer

  • Cannot boot from installed disk on Intel Xserve

    I have an Intel Xserve.
    I have had it for some months,it has been working fine, it is a standby backup machine to others and is used as a testbed.
    I have just installed from the supplied DVD 10.4.8.
    The installation goes smoothly, however after the first reboot. The system is trying to install from dvd again.
    I have tried installing a known working Intel boot disk, and this just gives a folder with the flashing question mark.
    I have tried formatting the disk and partitioning making sure to use GUID partition and it doesn't boot.
    I can however boot from a external FW drive with 10.4.10 installed.
    I can then go into Startup disk and set the boot disk as on of the installed drives, but this has No effect.
    I am currently trying to Clone from the FW drive to an installed drive.
    Has anyone seen this behaviour?
    Can someone tell me what I can try to resolve this.
    All I have read regarding Flashing Question Marks is to ensure disks are using GUID partion and when booting from another disk to set the boot disk in the System Prefences.

    Welcome to the forum!
    You're missing the first disk which is "Rescue and Recovery", followed by CDs 1-7.
    Make sure to re-align the partitions before or after OS installation in order to get the proper utilization of that SSD.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Wiped macbook pro will not boot from install DVD

    I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs.  The computer will not boot from the DVD.  I have booted holding down the C key and nothing happens.  I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
    How do I get it to open up the Utilities from the DVD to install the operating system?

    It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
    Exactly which MBP do you have, and what serial numbers are on the discs ?.

  • Holding c while resarting but will not boot from install disc

    hello,
    I have a G4 Titanium Powerbook currently running os 10.3.9.
    I have been having troubles ever since upgrading to Quicktime a while back such as Quicktime not playing files, missing codecs, Pro-Tools and other software crashes, Itunes will not open with M-Box connected, etc.
    I have tried to repair permissions with the disk utility and still same issues.
    I have backed up all important files and would like to just reinstall the os 10.1 using the disc I got with the powerbook hoping to be able to upgrade back to 10.3.9.
    I have tried to shutdown with the disk in and turn on with the c button pressed and it still boots up as usual.
    I have also tried to restart holding c and still boots up as usual. I just cannot seem to get the powerbook to boot from the install disc.
    The disc is the powerbook g4 mac osx 10.1 install disc.
    What am I doing wrong?

    i have the following discs.
    mac osx install - which is 10.1
    mac os9 install
    software restore 1
    software restore 2
    mac osx developer tools
    I have tried to boot by holding c with the mac osx install and the software restore 1 discs to no avail
    I just tried to put itunes on the desktop run disc utility trash itunes reciepts and repaired permissions and got this messege which i seem to get every time but am still having issues.
    Repairing permissions for “Macintosh HD”
    Determining correct file permissions.
    We are using special permissions for the file or directory ./Library/ColorSync/Profiles/Displays. New permissions are 16893
    We are using special permissions for the file or directory ./Library/ColorSync/Profiles. New permissions are 16893
    We are using special permissions for the file or directory ./System/Library/Filesystems/cd9660.fs/cd9660.util. New permissions are 33261
    We are using a special uid for the file or directory ./private/var/at/jobs. New uid is 1
    We are using a special uid for the file or directory ./private/var/at/spool. New uid is 1
    The privileges have been verified or repaired on the selected volume
    Permissions repair complete
    I just really want a clean install. help please
    powerbook G4   Mac OS X (10.3.9)  

  • Pismo won't boot from install disks

    Hi! I've looked to find the answer elsewhere, but no luck... apologies if this has already been answered.
    I have a Powerbook G3 Pismo which I now need to use to run Hypercard. (Yes!)
    It has been sitting unused for over a year.
    It didn't start up.
    I found an article that explained how to remove the PRAM battery. I did so. It starts up fine when connected to power.
    I have ordered a new PRAM battery, but it hasn't arrived yet. I decided to go ahead and try to get it to boot.
    When I powered up, I got the alternating icon saying it couldn't find an installed system.
    I guessed that the hard drive had become corrupt, so I rebooted into Target Disk mode. It worked!
    I connected it via FireWire to a MacBook Pro. The Pismo did show up as an external firewire hard drive. Good!
    Using OS X Disk Utility, I erased the Pismo drive.
    I couldn't decide whether to use OS X Extended, or OS X Extended (Journaled).
    I didn't know about any options to install drivers for OS 9, so I probably did the wrong thing. (Pismo can boot into either OS 9 or OS X, I think.)
    I tried to fix this later (see below).
    I disconnected the Firewire and shut down.
    I finally got the Pismo to boot up from a MacWarrior CD (a 3rd-party disk utility that fixes directory problems). I used it to fix the directory.
    It still wouldn't boot from the original disks that came with the Pismo. The optical reader whirred away, I got a blank gray screen, it whirred again, I got another blank gray screen, but the cursor never showed up in the upper left corner. After half an hour, it had made no progress.
    I reconnected the Pismo to the Macbook Pro using Firewire.
    I tried to install Tiger on the Pismo using my officially purchased, large-box Tiger software. The Macbook Pro mounted the disk, but when I ran the installer, it told me I couldn't install Tiger on this machine (the Macbook Pro, duh!) and only gave me the option to quit.I thought that I could use an all-model install disk to install OS X on ANY external hard drive! What gives???!???
    I tried to boot from the AppleCare Protection Plan's TechTool Deluxe.
    It seemed to be booting fine into 9.1. Yippee!
    It halted with a System Error (address error) telling me to restart holding down the Shift key.
    I do so. It seemed to be booting fine into 9.1 again, Extensions Off.
    But it halted with the same System Error.
    I read about OS 9 drivers and went back into Disk Utility using the Macbook Pro.
    Using Firewire to access my Pismo hard drive, I re-erased everything and made the partition have an Apple Partition Map.
    I did not see any option to check or uncheck that mentioned installing OS 9 drivers. Did I miss it? Was it not there because I'm using a recent version of Disk Utility?
    Same problems. Can't boot from the original Pismo "Software Restore" or "Software Install" disks, nor the TechTool Deluxe...
    VERY FRUSTRATING! Have I tried everything? Has the hard drive gone bad?
    Any help would be appreciated.

    My new PRAM battery has been installed. I reset PRAM by doing a command-option-P-R.
    The problem remains, but it's getting more consistent, which I guess is progress. With the Pismo connected to AC power (all my batteries are, of course, dead by now), the following has happened:
    When I start up with the Tiger installation disk, everything goes smoothly, the gray Apple logo appears, and then, suddenly, a flurry of white text on an irregular black background floods the screen. Darwin says there's a kernel panic and they're in a loop ("we are hanging here").
    When I start up with the original Software Restore disk, the blank gray screen blinks, turns a different shade of gray, the cursor arrow shows up in the upper left-hand corner, and it hangs. The cursor arrow doesn't respond to the trackpad; it's frozen.
    When I start with the original Software Install disk, the same sequence takes place, but there is no cursor arrow that shows up. It just has the gray screen, a blink with a slightly different shade of gray, then it hangs.
    The behavior is exactly the same for all 3 disks (respectively) when I use the MacBook Pro to start up:
    Insert Pismo or Tiger disk into MacBook Pro (counterintuitively).
    Start up the Pro in Target mode. Connect to Pismo using Firewire cable.
    Start up Pismo. Pismo takes awhile to notice the Firewire disk, but eventually does.
    Then it tries to use the disk in the Pro, but ends up acting case-by-case as it did when each disk was in the Pismo's drive (kernel panic hanging, gray screen with arrow, gray screen without arrow).
    Helllllp!
    My last chance will be to take a hard drive from a defunct ice iBook (dual USB) and use it to replace the factory-supplied Pismo drive. That iBook was a G4; the Pismo is a G3 (I believe). If there has developed a deep, difficult problem with the Pismo's hard drive, hopefully this will solve it:
    I will try to boot from the iBook-drive-in-the-Pismo. I doubt this will work. If it does, great! If not...
    I will try to boot from the Tiger installation disk, and if that works, try to install the Tiger software on it.
    If that doesn't work, I will try to boot from the Software Restore and the Software Install disks.
    If that doesn't work, I give up!!!! Unless someone here has a better idea.

  • IBook on 10.4 won't boot from Install Disk

    Hi - Somewhere along the line I lost DiskUtility from my iBook running 10.4.11. I thought I could run it from the Install Disc but I find the iBook won't boot from the Disc and DU won't run from the Disc (when I do manage to track it down there).
    I have install discs from a G4 Powerbook and a MacBookPro Unibody but I'm concerned about repairing permissions from the wrong version of DU (even if I could get the iBook to boot from those discs). Is a newer disc OK? I want to run or install DiskUtility. What are my options??
    How can I get the iBook to boot from its install disc?
    TIA your expertise...
    j2

    The installers are machine-series specific. And the Intel disc won't work
    in the PPC Mac, additionally. If you have the correct disc for that iBook,
    then you can boot the computer with the disc inside the optical drive
    and hold the C key down, until Installer appears on the screen; a second
    screen after the initial language screen has a full menu bar and Installer
    in the header; options appear in the drop-down menu lists, Disk Utility is
    among utility and other features listed in there.
    If you do not have an iBook G4 disc or an OS X disc retail version capable
    of doing the job, you really should get the correct disc. In a few instances,
    another path may work, but is not recommended. And you could lose the
    content of the hard drive in the computer you are hoping to save.
    However, you may be able to use Pacifist to get Disk Utility from the PB G4
    installer disc to be made available on the desktop of the iBook, and use
    Pacifist to install that extracted package item from the other PPC install disc.
    This does not use the installers on the disc media, so Pacifist is used to do
    the process. The iBook ideally needs a replacement disc set, and that may
    be available from Apple online store's sales support (see online phone#)
    and the product would be matched by serial number. A fee is involved.
    The original software disc set would have the correct Apple Hardware Test
    and the software kit as included when the computer was new.
    If Tiger did not ship with the computer in question, then a full retail disc 10.4
    installer could probably be used; since it would be newer than, say 10.3.9.
    In natural progression, the newer disc of correct kind & type supported by
    the computer is a possible path; however a Leopard disc won't help fix Tiger.
    You could also use Disk Utility in one PPC Mac, via FireWire Target Disk
    mode, to repair the drive of the iBook. It would only appear as a hard drive.
    So, repairing disk permissions would not be possible, on a non-boot volume.
    This, only within limits; differences in build versions of OS and custom installs
    done to a computer configuration may make doing so very limited. I would
    not expect an Intel-Mac's version of the same OS to help a PPC in any way.
    Good luck & happy computing!
    { edited 2x }

  • How to undo boot camp, wont boot from install disk in dvd drive

    A few months ago I went through trying out boot camp and parallels. Now, I think something is messed up. I dont need either right now, so I just want to wipe out the whole system, repartition the drive, and restore to a blank new install of os x 10.5 leopard.
    But when I put in the install disk, it wont boot up off it.
    I tried holding down the c key while powering it up, and it just cycles through: hearing the drive whirl, a bling sound, and then repeating it again while the screen is blank. Finally, I held down the click button on the touch pad so it would eject the install disk.
    Maybe this will help someone recognize part of the problem. Ever since messing around with boot camp and parallels, my machine wont "reboot". To reboot it, I tell it to reboot, then it hangs on the star like screen, then I have to hold the power button down, then if I do nothing, it tries to boot, but ends up in a dos looking screen saying no bootable device. So when I power it back up, I hold down the alt key, and then I have one choice: the hard drive. I pick that and it boots up ok.
    So... I thought, well, maybe the boot camp is still messed up; maybe I should undo boot camp. When I start the boot camp assistant, there is only a "partition" and "back" button; nothing to "restore" the hard drive to just one partition.
    What can I do? I want to wipe the drive and install a fresh install from my install disk.

    Forgot to specify:
    Im using an older Unibody Macbook (back when they were not all macbook pro's) 2008ish with Snow leopard 1.6.8
    The thread you linked me to, Eric, shows the guy 'Niganit' with the eXACT SAME PROBLEM as me! He seems to have found out the problem but I dont see his resolve.
    I just dont have the option to install windows 7 in any other form that a cd
    a picture;

  • Will Not Boot From Install Disc

    Upon a Verify Disk check I received a "Volume Header needs minor repair" notice.
    Because it is necessary to boot from another disc to repair the header, I attempted to boot from the install disc. I tried restarts holding down the "C" or by selecting the start up disc in System Preferences/Startup Disk. I've tried each of the these several times to no avail. The machine will not start from the install disc. It keeps starting from the machine hard drive.
    Are there any other suggestions how to force it to start from a startup disk?

    The installer disc problem is still a concern but in the meantime you can try booting to Safe Mode. Run Disk Utility again from Safe Mode and see if it still reports problems. Boot normally afterward.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    [Mac OS X 10.4, 10.5- Computer shuts down during Safe Boot|http://support.apple.com/kb/TA24054]
    Safe boot mode runs a directory check command similar to that used by Disk Utility's repair. In Tiger it ignores some stored information (cache) that is normally read that speeds up the boot process, and it moves some other caches to the trash. It also uses only System fonts and disables all Startup Items, third party items, and any Login Items.

  • G5 will not boot from system disk or from Tech Tool Pro 5

    Hi everyone - Having a bit of trouble and hoped I might find some answers here.
    I suspect my system drive was having some issues as it sounded like it was being taxed and strained as I would open up applications from it. Upon verifying the disk using Disk Utilities, the test would stop short with the following message:
    First Aid Failed
    Disk Utility stopped verifying "Macintosh HD" because the following error was encountered
    Filesystem verify or repair failed
    In addition, an error message came up (in red) on the disk utility screen as well saying:
    Volume header needs minor repair
    The volume Macintosh HD needs to be repaired
    Error: Filesystem verify or repair failed
    Normally from here, I'd start up the computer from the Tech Tool Pro 5 disk (holding down C key upon restart). But when I did this, the computer never responded. Instead, the power was on but the screens went black and the computer went into a very quiet "idle" mode.
    After about a minute, the fans began ramping up pretty high (and loud). This went on until I finally had to manually shut down the computer by holding the power switch down for a few seconds. I didn't know what else to do. Those fans were not coming down (not even after 10 minutes).
    Anyway, I pushed the power button again and held the C key down. Still, nothing.... The fans stayed idle, for a little while and then ramped up again just like last time. I hit that same dead end and powered down the computer via the power button.
    Is there an alternate way to boot the computer from Tech Tool Pro or the original start up disks? I'm having no luck, here.
    I'm on my way into town to purchase a new internal drive (something with about 1TB of space) so that my pro apps can swim a little instead of being being bogged down on a 250G drive.
    Thanks for any assistance, folks!
    Oh yeah.... Happy New Year to everyone!!
    Steve

    The Install disk has version 10.4 on it. I have also tried booting from my OS 10.5 disk but with no avail.
    However, here is an update on my plight.
    Apple tech says that after hearing the symptoms, he thinks that one of the processors is shot. Being that my particular model of G5 (dual 2.7 processors) is a liquid cooled machine, it's possible that some sort of leak has formed and has either taken out a processor or has caused a processor to overheat. He says that this model of G5 has been known to do that. In this case, nothing will boot which makes me think that my original system drive may actually be okay. I'm taking it in for the tech to look at it and just be sure that's the problem. However, if it is a dead processor, the part alone would run $799 plus labor to install it. Frankly, that's just too much for me to pay to keep this old G5. I'd rather put that money towards a new or reconditioned Mac Pro 8 core or quad core machine.
    I've owned several Mac computers in the past and perhaps this is the frustration talking but it seems that no matter how diligent you are in maintaining your Macintosh, these machines only seem to last about 5 years before something majorly wrong happens (mother board, processor, etc). Can I expect this same, limited time frame from a new Mac Pro? I mean, am I just being paranoid?

Maybe you are looking for