Powerbook g3 walstreet 12.1 display need help!!!
hello,
i just bought my first mac off ebay, its a wallstreet with 12.1 display, just that the screen is craked it powers up and everything but i need to replace the screen itself, i just got a 12.1 screen off ebay just the screen itself not the whole display, can anyone help me in how to install it, one more question can i put a 14.1 display on this model if i can't what do i need to replace
thanks
shumi35
powerbook g3 wallstreet Mac OS 9.2.x
The 12.1 model does not have enough VRAM to drive the larger displays - to run a 13 or 14" screen you would need to replace the motherboard.
To get at the dispaly you will need a torx screwdriver (a T8 I think), you will find screws under the rubber bumpers at the top and under small glued in plastic discs at the bottom. Once these are removed carefully lever the two halves apart doing as little damage as possible - by gentle levering you should be able to see where the latches actually are, pushing the inner bits inwards with a small flat-bladed screwdriver will ease separation.
The display itself will be screwed to the back piece of the hosing - unscrew it and carefully pull it forward, behind the display you will find the connectors for the backlight and data feed which you can now disconnect.
Fit new screen, reconnecting as you go (which should be easy as long as the display is exactly the same), clip display back together, refit the screws and glue the bumpers and discs back in.
You may want to test the new display before screwing the display frame back together..........
Good luck!
Similar Messages
-
Color management on LCD displays, need help
Dear all,
I know the same topic has been already raised so many times, but i just can't help to ask it again. I am sorry for that, I just realize I will at least get a concept of what to do next. Ppl here are helpful.
I don't own any Apple monitor. I have a Macmini, connected to a new SONY LCD display, SDM-HS95P, by DVI connector.
As everyone knows the situation of LCD monitors. They have higher contrast, brigther image that traditional CRT monitors. That's why photographers and graphic designers are blaming all the time.
And now, I face the same as they do. My monitor is no more "WYSIWYG". The red i have here, may become another red on printing. The yellow I have here, may become orange on CRT.
I calibrated with the Colorsync of OSX, I decreased the contrast and bright level of my monitor, but they dont help much.
Someone suggested here to purchase color management hardwares. Of coz i know they are helpful. But the point is, how can a little student to afford a such expensive hardware for only doing color management?
Apple displays are all in LCD these days, how does Apple help their users to overcome the mentioned situation?
I know this maybe just a never-ending question, but i think ppl here may come up with some new ideas in resolving this.
Please kindly help, much appreciate! Thanks!
regards,
KKCHUNG
Macmini 1.25 GHZ/ 1GB ram Mac OS X (10.4.3)Hi.
Apple cinema displays do not offer the user the ability to adjust the contrast. You need to be able to adjust contrast when calibrating the 2nd monitor to match the target white and black luminence values of the first monitor.
Contrast is needed in order to adjust the white luminence value of the monitor you are calibrating. You need to be able to adjust the black and white luminence values of monitor 2 when using the white and black luminence target values from monitor 1 if you want both monitors to be calibrated so that they use the same (same but seperate) profiles.
Colorvision (makers of spyder2 pro) has indicated that this is a huge issue with the ACD monitors and they are currently researching a workaround.
If anyone knows how to fix this... please tell me (us)... thanks. -
Macbook won't show detect displays need help???
Won't detect any, but says I need 2 displays sometimes??? Help
dohdoh1985 wrote:
- I tried every Snow Leopard Release from 10.5.8 to 10.6.4
Assuming this means the TV was not detected in any of these versions, this would not be a Snow Leopard installation or setup issue. I think that is what sig is trying to tell you.
If this is true, you might want to post in the MacBook forums to see if anyone has a similar issue. It would be a good idea to post the model number of your Toshiba if you do so, as this might be relevant. Otherwise, it sounds like the problem is in the TV, since the MacBook works with other displays.
Tip: to avoid unexpected formatting oddities that might make your posts hard to read, you can use the "Preview" tab before you post to see how your post will be formatted.
Message was edited by: R C-R -
7-Segment Display Need Help Immediately!! Please!!!
I can't figure out how I build this at all. I need so much help please! If anyone has any idea it would be great. I can't figure out how to make a keyboard on here or how to use the encoder and decoder correctly. Please help me.
Thank you much appreciated.
Attachments:
Project_3.doc 113 KBHi,
I didn't look through the entire assignment but I suggest you look up the datasheet for the 74147 and 7447.
Tien P.
National Instruments -
Imac g5 + 17' studio display need help please
hi i have an imacg5 the model with the isite built in, and i just got ahold of an 17 inch apple lcd studio display...ive had a real hard time looking for adapters, i bought the apple adc to dvi converter thing for 99 dollars and i have that dvi wire going into a dvi to vga adapter so i could use try to use it on my imac... it all hooks up fine but i dont receive any picture, just a black screen...the usbs work fine sumhow, i can plug in my ipod and that reads thru the moniter fine. does anyone know anyway i could fix this? thanks alot in advance.
Have you tried http://support.apple.com/kb/TS2094 ?
Also, before going to step 5 and taking a screwdriver to it, try:
Powering up with Option held down
Booting from an install DVD with C or Option held down
Booting from an install DVD into Apple Hardware Test by holding D down -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Need Help with Address Display
I need help with APEX.
Here's my situation:
I have a report that displays brief employee information. Among the information displayed is the Address. Right now, it's display as:
Mr X
Employee Id
Accounting Department
Address 1
Mr X
Employee Id
Accounting Department
Address 2
I would like it to display
Mr X
Employee Id
Accounting Department
Address 1
Address 2
1) I have thought of using the Break functionality; however, the function only allows break at column 1, 2, 3. As you can see Address starts at column 4. Also, Address has a few columns; Address Line 1, Address Line 2, City, State, Zipcode.
2) Stragg functions - I'm not sure how to implement it since it has more than 1 columns.
Any ideas?
Thanks in advance
AndrewThe example I gave you, using analytic functions is a simple one.
Now, you are saying:
1. some of the employees may have two adresses?
2. if this is the case, your employee appears in the report twice?
3. you don't want his name, employee id and accounting department to appear twice?
4. only his address has to be displayed?
If the answer to all the questions is yes, this kind of query will help you. I repeat:
SELECT CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE employee_name
END employee_name,
CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE employee_id
END employee_id,
CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE accounting_department
END accounting_department,
street, postal_code, city, state, country
FROM your_employees_table;Give it a try.
Denes Kubicek -
I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar. The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks
AirPlay
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay -
Need Help in installations and connecting displays. Please!
Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you. -
Hi guys need Help with Displaying Splash Screen?!!?
Hi Guys.
Sorry for the last incomplete post my mistake!
I need help displaying a splash screen as an advertisment or something before i have my main application run.
Here is the code i wrote (it works as if it were a seperate application)
package MajourProject;
import java.awt.AWTException;
import java.awt.Dimension;
import java.awt.Robot;
import java.awt.Toolkit;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JWindow;
* @author Matt
public class SplashScreen extends JWindow
public SplashScreen()
int UpTime = 20000;
Start(UpTime);
public void Start(int UpTime)
ImageIcon ii = new ImageIcon("src/1.jpg");
JScrollPane jsp = new JScrollPane(new JLabel(ii));
JProgressBar Bar = new JProgressBar();
getContentPane().add(jsp);
setSize(853,303);
centerScreen();
setVisible(true);
try
Thread.sleep(20000);
dispose();
catch(Exception IE)
private void centerScreen()
Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
int x = (int) ((d.getWidth() - getWidth()) / 2);
int y = (int) ((d.getHeight() - getHeight()) / 2);
setLocation(x, (y-100));
public static void main(String [] args)
new SplashScreen();
}but i now have a problem as i already have a main application done as i wrote this seperately. I now need to combine the two together. So what i did was in my Main Application wrote:
Splash_Screen SS = new Splash_Screen();it then runs my Splash Screen class which i re-wrote to look as such:
package MajourProject;
import java.awt.AWTException;
import java.awt.Dimension;
import java.awt.Robot;
import java.awt.Toolkit;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JWindow;
* @author Matt
public class SplashScreen extends JWindow
public SplashScreen()
int time = 15000;
Start(time);
public void Start(int UpTime)
ImageIcon ii = new ImageIcon("src/1.jpg");
JScrollPane jsp = new JScrollPane(new JLabel(ii));
JProgressBar Bar = new JProgressBar();
getContentPane().add(jsp);
setSize(853,303);
centerScreen();
setVisible(true);
try
Thread.sleep(20000);
dispose();
catch(Exception IE)
private void centerScreen()
Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
int x = (int) ((d.getWidth() - getWidth()) / 2);
int y = (int) ((d.getHeight() - getHeight()) / 2);
setLocation(x, (y-100));
}it obviously runs the default constructor which then runs the other methods in the class but it doesn't seem to show can anybody help me to find out whats wrong? It seems to be there just before the main application launches but only for a split second. And when i am waiting while the thread is sleeping the area i have defined the Content pane for he cursor goes to the loading icon! I don't know if this makes any sence to you but if you can help me it would be most apreciated.
Thanks.SpearOne wrote:
Hi Encephalopathic
why would it work if i put it in it's own application surely it wouldn't be caused by this thread.sleep?? everything after it is in fact put to sleep. In its "own" application, nothing happens after it is displayed.
if it is the problem then could you please give me some code to add quickly to test??
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.ImageIcon;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JWindow;
import javax.swing.Timer;
public class SplashScreen extends JWindow
private static final String IMAGE_PATH = "src/1.jpg";
private static final int UP_TIME = 15000;
public SplashScreen()
Start();
public void Start()
ImageIcon ii = new ImageIcon(IMAGE_PATH);
JScrollPane jsp = new JScrollPane(new JLabel(ii));
//JProgressBar Bar = new JProgressBar();
getContentPane().add(jsp);
setSize(853, 303);
centerScreen();
private void centerScreen()
Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
int x = (int) ((d.getWidth() - getWidth()) / 2);
int y = (int) ((d.getHeight() - getHeight()) / 2);
setLocation(x, (y - 100));
public static void main(String[] args)
final JFrame frame = new JFrame("Main Frame");
frame.setPreferredSize(new Dimension(300, 200));
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setLocationRelativeTo(null);
final SplashScreen splash = new SplashScreen();
splash.setVisible(true);
Timer swingTimer = new Timer(UP_TIME, new ActionListener()
public void actionPerformed(ActionEvent e)
splash.dispose();
frame.setVisible(true);
swingTimer.setRepeats(false);
swingTimer.start();
} -
After I upgrade maverick my display will suddenly shut off but my sounds is still working. Need help
After I upgrade maverick my display will suddenly shut off but my sounds is still working. Need help on this? Thank you
Hello rodamitjr,
It sounds like your iMac display will turn off unexpectedly, but you can tell the computer is still on because you hear audio.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to an external display. I recommend reviewing the full article, but this step specifically stands out to me for the issue you described:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Need help on displaying the callers name on ip phone with cme using external directory
Hello Guys,
Need help on displaying the callers name on ip phone with cme while using external directory
Thank you,
KhajaThanks for your help,
Does it 100% work with CME. We use SIP and 2ring for external directory? Thanks you. -
Need help on "Displaying items for Library System"
Hi folks, i am currently new to this forum and I need help on this problem ASAP.
I currently doingSorry, I accidentally hit the enter button so i start again.
I currently doing a online Library system and I hve been assign the task of doing the "search items" use case.
The situation is like this, my system retrieves 50 items based on the user selection and displaying them on a page.
The problem is I do not know how to seperate the items cos I don wan to display everything on the page, wat i wan is like displaying first 20 items on the page and when the user click the "next" link, the next 20 items will be display on the same page.
My teacher ask me to use custom tags(WHICH I NEVER LEARN BEFORE) so
please give me advise or related links as soon as possible cos I have to hand in the project in two weeks time. -
All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks
Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.
-
Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398
Maybe you are looking for
-
Urgent: Error while uploading into pdf file
Hi , I got a requirement that converting smartform into pdf file and sending into application server, And uploading the that pdf file into presentation server once a day am geting error when uploading into pdf format from application server . Error :
-
Dear Gurus, There is a customzing point under Project System -> Costs -> Planned Costs -> Maintain plan data handling profile. Does anyone have any idea about: - where can it be used? - what is it used for? I was looking for any tool which makes plan
-
How do you style a sparks TitleWindow?
I'm having a hard time getting my head around the new Sparks css. To pick an example, I have a custom TitleWindow called HelpWindow. How do I set the font and color for the TitleBar? Also, is there a reference for what properties are available for s
-
How do I stop a motion tween earlier in the timeline? Instead of it stopping on frame 200 I want it to stop at frame 150. It is followed on the same layer by another motion tween. Here is the unfinshed version. [ http://portland.quik.com/sagew/dst I
-
Hi Experts, I'm trying to edit the UME properties for customized attributes. Can you please suggest how can I do that? our Data Source: ABAP System Data Source File Name: dataSourceConfiguration_abap.xml Thanks in advance. Regards, RN