Powerbook G4 1.25 GHz 1.5 MB RAM

I have tried to install Leopard on my PowerBook G4 1.25 GHz with 1.5 MB RAM. After I insert the disk and restart following a delay while the DVD is being searched, I get an error message that my computer needs to be restarted. I can't get past this error message no matter how many times I restart. Any suggestions?

I installed Leopard over Tiger and had lots of problems. The system was very slow, and software update crashed, as did other updaters. I solved the problem by using Time Machine to back up the entire computer to a firewire drive. I then restarted with the installation DVD in the drive, and holding the "C" key to boot from CD/DVD. Hold the "C" key all the way through the boot process to be sure. Do not skip the DVD Disk check. When the install screen comes up, select your PowerBook drive, and use the erase and install option to do a complete wipe and install. When the install is done, and the space age type finishes flying around, you will be given the option to migrate data from another computer, or to get the data from a Time Machine back-up. Select the Time Machine back-up (it takes a minute to calculate how much data there is). Let it do its thing. You will end up with a fresh system with all of your programs, settings, etc. Finally, run System Update to make sure you have all of the latest Apple updates to Leopard.
The whole process took me about 6 hours. I let Time Machine do its back-up when I went to sleep--I think it took 3-4 hours. The install of Leopard takes about 1.5 hours, and the Time Machine restore took another hour.
Hope this works for you.

Similar Messages

My experience with Tiger/new Powerbook 15", 1.67 ghz

Apple proclaims "Mac OS X v10.4 Tiger. The world’s most advanced operating system."
Well, that hasn't been the case in my experience.
I bought a new 15 Powerbook HR, 1.67 ghz, 1.5 gb ram, 80gb hd on 11/4/05 (from MacMall). At this point I have about 20gb free.
Problems I have noticed with it/OSX.(Most have been fixed by an archive and install done a few weeks ago.) Here's my trial by fire.
In chronological order
- trackpad lags
- many icons not correct after using Migration Assistant.
- some icons open up the wrong applications
- window resize button on Finder, and some app windows, doesn't open window to full screen. Also doesn't open window so that scroll bars disappear.
- dragging a file up or down a window in list view doesn't always make the window scroll up or down when I go up or down to the top or bottom edges. When they do move, it races. Smooth scrolling has no effect.
- CDr recorded on a machine with OSX 10.3.9 shows up as a recordable CD!
- screen dims when I disconnect power supply
-Network option from the Go menu does nothing.
- Doing a Get Info on a html file has Internet Explorer as the app to open when the files have Mozilla icons
- icon for some apps have wrong application logo on them
- screen dims and brightens rapidly, disconcertingly in low light. I turn off the ambient light adjustment on the monitors control panel. This is poorly implemented. Having the keys light up is nice though.
- can't reset F7 key to take pictures of screen. (I eventually am able to do it.)
- the clicker gives me a sharp pain in my arm from the second day of use. This has gotten better now but I was worried I might be getting carpal tunnel/repetitive stress injury. (This happened when I got my new Powerbook Firewire too, eventually going away.) The clickers are too stiff when new.
- I call Applecare. They don't have my registration information I gave them when I signed up on the web. We reset the Power Manger.
- Quicktime movies have no sound. I later throw out the LAME stuff (Component and Framework) and get sound back.
- I go to Genius at Apple Store. They tell me I am using a non-native resolution, that is why I am having screen dimming. (Wrong. It was the ambient light control.) They also say whatever software I have installed is likely to be causing most of the other problems.
- I get Finder freeze #1
- Preview does not animate gifs. It did with 10.3.9.
-System sounds do not work. Upon reboot they do. Flakey.
- some finder windows are not opening up with the item count in list view.
-desktop gets rearranged
-occasionally keyboard turns letters into numbers as if number lock is on. It isn't. The it will stop working altogether. Rebooting cures this. (Happens twice before I call AppleCare.)
- call AppleCare. They have my old address when I bought the Powerbook! I get registered again.I cannot install GarageBand, which I threw out thinking I didn't need it, because the install DVDs that came with my machine have an error reading the software only package. They will send me a new install disk #1.
- scrolling is not smooth, races.
- I notice the memory door has 3 out of the 4 screws loose. I tighten them. The battery door feels a little loose too but that is unfixable.
- keyboard doesn't respond #3
- I call AppleCare. They have the wrong address still in their database!
-eject DVD does not work. (It works all other times.)
- system freeze #2
- kernal panic #1
- Call AppleCare. My TechTool Deluxe CD will not boot. I ask for a replacement. (I can't believe they are still using TechTool Deluxe. I remember what a hassle it was trying to get a working disc with my Powerbook Firewire.
- keyboard types wrong characters #4
-Print preview does not work. (it does all other times.)
-Preference for video capture program (BTV) is not remembered
- audio is only heard when BTV is running (since fixed.)
- system freeze #3
- keyboard stops working #5
- I call Apple Care. We zap P-ram 3X.
- file sizes incorrect in list view. Have to open window a second time to get correct info.
- install DVD #1 arrives. It is defective.
- system freeze #4
- I update to 10.4.4. I hope this will cure the problems. Nope.
- Help doesn't work.
- Battery firmware update process works but isn't smooth. It crashes "unexpectedly" as I check to make sure it is really done. (It kept telling me I needed to do it.)
- Help works.
- boot takes forever after 10.4.4 update.
- battery firmware update wants to run again.
- file size is wrong in finder list view windows.
- keyboard stops working #6
- fan stops yet processor is still VERY busy as I am calibrating battery. Charge is about 5%.
- I quit IMovie, It then says it quit "unexpectedly". (This happens with other apps still.)
- I have to use power key to wake it from sleep, as I calibrate battery.
- keyboard problem #7
- system freeze # 5
- text editing in iDVD is very buggy. Cursor is impossible to see against background with many themes. There is no way to increase cursor size.
- AppleCare says they have sent TechTool Deluxe CD. I haven't gotten it yet.
- I receive install disk #1. 2 actually. I install software bundle only. It works! I also reinstall CPU help files. Help still doesn't work.
- I archive and install. (It installs 10.4.2 so I update to 10.4.4), Help doesn't work.
- Help works without my having done anything. OK.
- I repair a gazillion permissions. (funny how when you install the system software the permissions then need to be repaired. You would think the system would know to set the permissions correctly upon installation.
- I notice the order of the right hand menu items has changed (clock, keyboard setup, OS 9 icon...)
- file sizes wrong in list view
- BTV has audio loop at times. (See thread on Topic "New Powerbook Audio Stutter / Looping / Echo problem in Using your PowerBook G4 15-inch Aluminum forum.)
- keyboard problem #8
- keyboard problem #9
- I call AppleCare. TechTool Deluxe CD has still not arrived. We discuss other problems. I get hung up on.
-keyboard problem #10
- I go to Apple Store. Talk to the genius. He tells me the system software is "a house of cards", adding other software can cause unpredictable results. He zaps P-ram 3x, does something in open firmware. Recommends a clean install. I think about it and later decide not to.
- I lose system sounds after I install USBVison video capture driver for Tiger. I eventually get it back.
- I repair LOTS of permissions.
- The fan starts to make bad noise.
- system freeze $6
- I do a Get Info on a file I making with BTV. The OS tells me it is 11GB. I stop the recording and then I check again. It says it is 1.5 gb.
-iChat won't open. It starts, according to Activity Monitor, runs for about two seconds and then disappears.
- Network, under the Go menu, does nothing.
- I call AppleCare.
- I notice cursor disappears in Firefox.
- Yahoo IM icon keeps getting moved. All the icons it is next to are spaced about the same but this one keeps getting moved.
- I Stuff some stuff. The fan keeps running, it is still hot after I am finished. I have to reboot to get things back to normal.
- Some icons for PING files on my desktop have changed from having Preview icons to Quicktime icons. I use Get Info to change them back from Picture Viewer (OS 9!)
- the fan comes on with only my normal apps running (Eudora, Firefox, Yahoo IM)
Ok, that is about all up 'til now. I still haven't gotten my TechTool Deluxe CD but need to give that a few more days. I now have 8 install DVDs. (Another install #1 came yesterday, making a total of 6 #1, and 2 #2s) The address on the invoices are finally correct, most had the wrong town but the right zip code which I had corrected many times.
The problems that are still recurring are the keyboard problem, applications still sometimes crash "unexpectedly" even though I am quitting them, the file sizes are not right the first time around in finder list view windows. Most everything else was cured by the archive and install. Little weirdnesses still crop up though. I am not sure if the echo problem has been fixed. (Mac OS) Help is still slow to appear.
Thanks for bearing with me. I do hope things get smoother in the future. I have been using Macs for about 10 years now, starting with a used SE and 7.something, going to a refurbished LC 580 and 7.5.5, a new Powerbook Firewire and 9.2.2. I have also used 10.3.9 which seemed to be a lot more stable than 10.4.
Cheers,
John L

If it was me I would backup to DVD/ External HD if you have and erase / reinstall OSX.
Update all and once you are finished without the user folder / any of your files on torture the Pbook to see if this happens again.
This likely will be able to give you an idea about hardware or software problems.
If all is well , likely not then copy "COPY" over from the backup you "ONLY COPY" documents, music, Photo's, desktop stuff and also place programs back in Applications folder.
The reason for the above is that in the /user/"you"/library folder it stores the settings for Icon's, prefferences to programs and some other useless stuff + E-mails for either Mac Mail and or Microrubish Entorture "entourage" depending on what you have or used also Itunes prefs.
Once this is copied leave the "/user/you/library" stuff alone and see how it runs.
App's/programs will ask to have it's preferences set again as if /when you have installed it for the first time.
Likely most of the issues if software was in the/becuase of the settings in "/user/you/library".
If this solves a lot of problems the go with care and copy the "E-MAIL +/OR ENTORUTE/ENTOURAGE + ITUNES" to the same place as where they came from but obviously in /user/you/library/ subfolders etc. same subfolders.
For Entorture search for a file called "database" as this holds all the e-mail for entourage and by copying it, when you next open Entorture it will pick-up all emails + adresses etc like it was never moved also in the same spot as it was in the new instalation / subfolders etc..
If all this fails and you as close to what I reccomended here, there is then still some issues then likely it is hardware related.
How do I know this : Had for 5 times in 365 days had my Pbook in for repair so I have had to about 120+ times had to reinstall OSX 10.3.9 and/or Tiger.
I hope this helps as for hardware I am buying Alienware or Extreme as they can upgrade the cpuvideobasically all else except the motherboard " amd opteron 64 dualcore + Nvidia fx quadro 1400 + 1 or 2 hd's + 1/2 dvd's etc. etc. $2500"

How can I use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11?

Is it possible to use a USB 3.0 HDD with PowerBook G4 12" 1 Ghz OS 10.4.11? I'm using a HDD with a USB 3.0 tyo 2.0 cable that came with the drive, but it has proven to be extremely unreliable...cloned my system and backed numerous files to 3 partitions on the 1 TB drive, now I can no longer access the drive at all. None off my drive utilities will even show the volumes (TechToolPro, Disk Utility, Disk Warrior, or DataRx). If I plug it into a Windows machine running Windows 7, the drive appears, and is functioning perfectly. I'd just really like to use it with my PB G4, if at all possible...thanks for the help folks...StudioBill

You need drivers and adaptors which I doubt will work with a G4 Powerbook.
http://www.lacie.com/more/index.htm?id=10112

Severe performance problems with JSC2 on PowerBook G4 1.5 GHz

Help!
I've reached my wits' end trying to figure out how to get JSC2 to work without pausing for 2-6 minutes per click, right-click, drag, keystroke, etc.! I'm using a PowerBook G4 1.5 GHz (with 1.25 GB RAM and Mac OSX 10.3.9), and earlier, when I was building out projects, the lag time between clicks, typing, etc. would go from a split-second, to a few seconds, then now to minutes...
Originally, I thought that forcing JSC2 to rebuild the user profile every so often would help, and getting the Sun App Server to undeploy all of its web apps every so often would help, but even that is no longer working. It seems that just starting JSC2 without a user profile (thereby forcing it to create a new, blank one) is pretty much the only time it seems to function without significant lag time or freezing...
When I run the Mac's Activity Monitor, what seems to be showing up between user actions (clicks, typing, etc.) is ~ 95-100% CPU utilization. Earlier, I was thinking that perhaps the complexity of my Web apps was causing the problem, but that would mean that I can't create moderately sized apps (with a few rowsets in the SessionBean1, for instance). What strikes me as a bit odd is t hat sometimes, during the high CPU utilization periods, there is little or no disk activity.
I tried adjusting the settings in etc/creator.conf, but it doesn't seem to matter; the machine will gobble up all the memory (physical + virtual) very quickly.
Is there something I'm missing, or some sort of tuning that I need to do? Is there some sort of GC behavior that is wreaking havoc on my PB? Should be removing entries from the etc/creator.conf file that might help?

Well, I've tried stuff on the two threads you suggested, but still the same issue...
Anyway, I used the Stack Trace WebStart tool to create the data below during one of the pauses (a relatively short pause):
Full thread dump Java HotSpot(TM) Client VM (1.4.2-56 mixed mode):
"Stack Trace Remote Thread" prio=5 tid=0x38987300 nid=0x3a7a3200 waiting on condition [0..f0d0a260]
"Inactive RequestProcessor thread [Was:Default RequestProcessor/org.netbeans.modules.j2ee.deployment.impl.ui.InstanceNode$2]" daemon prio=1 tid=0x38b9f230 nid=0x3a7bc200 in Object.wait() [f0c08000..f0c08b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x6514358> (a java.lang.Object)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
     - locked <0x6514358> (a java.lang.Object)
"VCS Command Tasks Starter Loop" daemon prio=1 tid=0x3893cbf0 nid=0x35747000 in Object.wait() [f174e000..f174eb20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
     at java.lang.Object.wait(Object.java:429)
     at org.netbeans.modules.vcscore.commands.CommandProcessor.executorStarterLoop(CommandProcessor.java:757)
     - locked <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
     at org.netbeans.modules.vcscore.commands.CommandProcessor.access$700(CommandProcessor.java:65)
     at org.netbeans.modules.vcscore.commands.CommandProcessor$5.run(CommandProcessor.java:776)
     at java.lang.Thread.run(Thread.java:552)
"MDR event dispatcher" daemon prio=6 tid=0x005ed550 nid=0x1e35e00 in Object.wait() [f13c7000..f13c7b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0xa660060> (a java.util.LinkedList)
     at java.lang.Object.wait(Object.java:429)
     at org.netbeans.mdr.util.EventNotifier$EventsDelivery.run(EventNotifier.java:257)
     - locked <0xa660060> (a java.util.LinkedList)
     at java.lang.Thread.run(Thread.java:552)
"DestroyJavaVM" prio=5 tid=0x00501180 nid=0x1801600 waiting on condition [0..f0800270]
"TimerQueue" daemon prio=5 tid=0x005c7ab0 nid=0x35284400 in Object.wait() [f1244000..f1244b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0xa16e4b0> (a javax.swing.TimerQueue)
     at javax.swing.TimerQueue.run(TimerQueue.java:231)
     - locked <0xa16e4b0> (a javax.swing.TimerQueue)
     at java.lang.Thread.run(Thread.java:552)
"AWT-EventQueue-1" prio=6 tid=0x0051e500 nid=0x1c19a00 in Object.wait() [f11c3000..f11c3b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0xa16e578> (a java.awt.EventQueue)
     at java.lang.Object.wait(Object.java:429)
     at java.awt.EventQueue.getNextEvent(EventQueue.java:363)
     - locked <0xa16e578> (a java.awt.EventQueue)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:195)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:178)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
"Creator Error Handler Listener" prio=5 tid=0x005c6000 nid=0x1fd2800 runnable [f0ebd000..f0ebdb20]
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
     - locked <0xa16e628> (a java.net.PlainSocketImpl)
     at java.net.ServerSocket.implAccept(ServerSocket.java:448)
     at java.net.ServerSocket.accept(ServerSocket.java:419)
     at com.sun.rave.errorhandler.DebugServerThread.run(DebugServerThread.java:81)
"AWT-Shutdown" prio=5 tid=0x0051e3a0 nid=0x1917800 in Object.wait() [f1040000..f1040b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x98dcb08> (a java.lang.Object)
     at java.lang.Object.wait(Object.java:429)
     at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
     - locked <0x98dcb08> (a java.lang.Object)
     at java.lang.Thread.run(Thread.java:552)
"Java2D Disposer" daemon prio=10 tid=0x0051a5e0 nid=0x1900c00 in Object.wait() [f0f3e000..f0f3eb20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x98dcb78> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
     - locked <0x98dcb78> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
     at sun.java2d.Disposer.run(Disposer.java:116)
     at java.lang.Thread.run(Thread.java:552)
"Active Reference Queue Daemon" daemon prio=1 tid=0x00516f40 nid=0x18ec800 in Object.wait() [f0e3c000..f0e3cb20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x98dcbe8> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
     - locked <0x98dcbe8> (a java.lang.ref.ReferenceQueue$Lock)
     at org.openide.util.Utilities$ActiveQueue.run(Utilities.java:2465)
     at java.lang.Thread.run(Thread.java:552)
"Thread-1" daemon prio=5 tid=0x00516820 nid=0x18c8200 in Object.wait() [f0dbb000..f0dbbb20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x98dcc60> (a java.util.TaskQueue)
     at java.util.TimerThread.mainLoop(Timer.java:429)
     - locked <0x98dcc60> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Timer.java:382)
"AWT-AppKit" daemon prio=5 tid=0x005125f0 nid=0xa000b2a4 runnable [0..bfffe360]
"CLI Requests Server" daemon prio=5 tid=0x00510d30 nid=0x1888200 runnable [f0c89000..f0c89b20]
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
     - locked <0x98dcf60> (a java.net.PlainSocketImpl)
     at java.net.ServerSocket.implAccept(ServerSocket.java:448)
     at java.net.ServerSocket.accept(ServerSocket.java:419)
     at org.netbeans.CLIHandler$Server.run(CLIHandler.java:758)
"Signal Dispatcher" daemon prio=10 tid=0x00508600 nid=0x1813600 runnable [0..0]
"Finalizer" daemon prio=8 tid=0x00506c40 nid=0x1814400 in Object.wait() [f0a04000..f0a04b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0xa16e7b0> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
     - locked <0xa16e7b0> (a java.lang.ref.ReferenceQueue$Lock)
     at org.netbeans.modules.applemenu.FontReferenceQueue.remove(FontReferenceQueue.java:80)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
     at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x00506910 nid=0x1802600 in Object.wait() [f0983000..f0983b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x98dcd50> (a java.lang.ref.Reference$Lock)
     at java.lang.Object.wait(Object.java:429)
     at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:115)
     - locked <0x98dcd50> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=5 tid=0x00506190 nid=0x1803200 runnable
"VM Periodic Task Thread" prio=10 tid=0x00508540 nid=0x1813200 waiting on condition
"Exception Catcher Thread" prio=10 tid=0x00501110 nid=0x1802e00 runnable
=====
Memory
=====
Total: 437694464
Free: 161603568
Max: 620756992
[############################################===========================.............................]
Available Processors: 1
attach 477
GNU gdb 5.3-20030128 (Apple version gdb-330.1) (Fri Jul 16 21:42:28 GMT 2004)
Copyright 2003 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "powerpc-apple-darwin".
(gdb) (gdb) Attaching to process 477.
info sharedlibrary dyld
Reading symbols for shared libraries . done
Reading symbols for shared libraries ............................................................................................. done
0x900078b8 in mach_msg_trap ()
(gdb) Requested State Current State
Num Basename Type Address Reason | | Source
| | | | | | | |
2 dyld - 0x8fe00000 dyld Y Y /usr/lib/dyld at 0x8fe00000 (offset 0x0) with prefix "__dyld_"
3 JavaVM F 0x91ebd000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVM at 0x91ebd000 (offset 0x0)
4 CoreFoundation F 0x901c0000 dyld Y Y /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation at 0x901c0000 (offset 0x0)
5 libSystem.B.dylib - 0x90000000 dyld Y Y /usr/lib/libSystem.B.dylib at 0x90000000 (offset 0x0)
(commpage objfile is) /usr/lib/libSystem.B.dylib[LC_SEGMENT.__DATA.__commpage]
6 Foundation F 0x90a20000 dyld Y Y /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation at 0x90a20000 (offset 0x0)
7 libicucore.A.dylib - 0x968d0000 dyld Y Y /usr/lib/libicucore.A.dylib at 0x968d0000 (offset 0x0)
8 libmathCommon.A.dylib - 0x939d0000 dyld Y Y /usr/lib/system/libmathCommon.A.dylib at 0x939d0000 (offset 0x0)
(symbols read from) /usr/libexec/gdb/symfiles/libmathCommon.A.dylib.syms
9 libxml2.2.dylib - 0x80830000 dyld Y Y /usr/lib/libxml2.2.dylib at 0x80830000 (offset 0x0)
10 CoreServices F 0x90700000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices at 0x90700000 (offset 0x0)
11 SystemConfiguration F 0x90d00000 dyld Y Y /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration at 0x90d00000 (offset 0x0)
12 libobjc.A.dylib - 0x90830000 dyld Y Y /usr/lib/libobjc.A.dylib at 0x90830000 (offset 0x0)
13 libz.1.dylib - 0x945b0000 dyld Y Y /usr/lib/libz.1.dylib at 0x945b0000 (offset 0x0)
14 libiconv.2.dylib - 0x96cb0000 dyld Y Y /usr/lib/libiconv.2.dylib at 0x96cb0000 (offset 0x0)
15 CarbonCore F 0x902b0000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore at 0x902b0000 (offset 0x0)
16 OSServices F 0x90610000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices at 0x90610000 (offset 0x0)
17 CFNetwork F 0x927f0000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork at 0x927f0000 (offset 0x0)
18 WebServicesCore F 0x946ed000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore at 0x946ed000 (offset 0x0)
19 SearchKit F 0x94650000 dyld Y Y /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit at 0x94650000 (offset 0x0)
20 IOKit F 0x90584000 dyld Y Y /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit at 0x90584000 (offset 0x0)
21 DiskArbitration F 0x907f0000 dyld Y Y /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbitration at 0x907f0000 (offset 0x0)
22 Security F 0x920c0000 dyld Y Y /System/Library/Frameworks/Security.framework/Versions/A/Security at 0x920c0000 (offset 0x0)
23 libresolv.9.dylib - 0x94610000 dyld Y Y /usr/lib/libresolv.9.dylib at 0x94610000 (offset 0x0)
24 Bom F 0x91280000 dyld Y Y /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom at 0x91280000 (offset 0x0)
25 libclient.dylib - 0x94723000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libclient.dylib at 0x94723000 (offset 0x0)
26 libverify.dylib - 0x91ec5000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libverify.dylib at 0x91ec5000 (offset 0x0)
27 libjava.jnilib - 0x95ec2000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libjava.jnilib at 0x95ec2000 (offset 0x0)
28 libzip.jnilib - 0x80d5b000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libzip.jnilib at 0x80d5b000 (offset 0x0)
29 JavaApplicationLauncher F 0x7df12000 dyld Y Y /System/Library/PrivateFrameworks/JavaApplicationLauncher.framework/Versions/A/JavaApplicationLauncher at 0x7df12000 (offset 0x0)
30 ApplicationServices F 0x90810000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices at 0x90810000 (offset 0x0)
call (void *)dlopen("/Users/slinc/Library/Caches/Java Web Start/cache/http/Dtmitevski.users.mcs2.netarray.com/P80/DMstacktrace/DMapp/RNmacproc.jar/libdump.jnilib", 1)
31 QuickTime F 0x814d9000 dyld Y Y /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime at 0x814d9000 (offset 0x0)
32 AppKit F 0x92e70000 dyld Y Y /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit at 0x92e70000 (offset 0x0)
33 AE F 0x92727000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE at 0x92727000 (offset 0x0)
34 ATS F 0x96b50000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS at 0x96b50000 (offset 0x0)
35 ColorSync F 0x913a0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync at 0x913a0000 (offset 0x0)
36 CoreGraphics F 0x9652c000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics at 0x9652c000 (offset 0x0)
37 PrintCore F 0x916e0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore at 0x916e0000 (offset 0x0)
38 QD F 0x915e0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD at 0x915e0000 (offset 0x0)
39 LangAnalysis F 0x912e0000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis at 0x912e0000 (offset 0x0)
40 HIServices F 0x908c5000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices at 0x908c5000 (offset 0x0)
41 SpeechSynthesis F 0x90c32000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis at 0x90c32000 (offset 0x0)
42 FindByContent F 0x92070000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent at 0x92070000 (offset 0x0)
43 LaunchServices F 0x92430000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices at 0x92430000 (offset 0x0)
44 Carbon F 0x90d40000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon at 0x90d40000 (offset 0x0)
45 CoreAudio F 0x90702000 dyld Y Y /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio at 0x90702000 (offset 0x0)
46 AudioToolbox F 0x93846000 dyld Y Y /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox at 0x93846000 (offset 0x0)
47 AudioUnit F 0x96a7b000 dyld Y Y /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit at 0x96a7b000 (offset 0x0)
48 Accelerate F 0x8fd50000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate at 0x8fd50000 (offset 0x0)
49 libstdc++.6.dylib - 0x80a50000 dyld Y Y /usr/lib/libstdc++.6.dylib at 0x80a50000 (offset 0x0)
50 libgcc_s.1.dylib - 0x81c79000 dyld Y Y /usr/lib/libgcc_s.1.dylib at 0x81c79000 (offset 0x0)
51 HIToolbox F 0x92880000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox at 0x92880000 (offset 0x0)
52 SpeechRecognition F 0x917e0000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition at 0x917e0000 (offset 0x0)
53 DesktopServicesPriv F 0x90940000 dyld Y Y /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv at 0x90940000 (offset 0x0)
54 libbsm.dylib - 0x9415d000 dyld Y Y /usr/lib/libbsm.dylib at 0x9415d000 (offset 0x0)
55 libcups.2.dylib - 0x939a0000 dyld Y Y /usr/lib/libcups.2.dylib at 0x939a0000 (offset 0x0)
56 ImageCapture F 0x917fc000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture at 0x917fc000 (offset 0x0)
57 SecurityHI F 0x91956000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI at 0x91956000 (offset 0x0)
58 Ink F 0x96c00000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink at 0x96c00000 (offset 0x0)
59 Help F 0x9277a000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help at 0x9277a000 (offset 0x0)
60 OpenScripting F 0x95e0a000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting at 0x95e0a000 (offset 0x0)
61 Print F 0x96a04000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print at 0x96a04000 (offset 0x0)
62 HTMLRendering F 0x91303000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering at 0x91303000 (offset 0x0)
63 NavigationServices F 0x98f2d000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices at 0x98f2d000 (offset 0x0)
64 CarbonSound F 0x927b2000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound at 0x927b2000 (offset 0x0)
65 CommonPanels F 0x94580000 dyld Y Y /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels at 0x94580000 (offset 0x0)
66 vecLib F 0x96e80000 dyld Y Y /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib at 0x96e80000 (offset 0x0)
67 vImage F 0x87f60000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage at 0x87f60000 (offset 0x0)
68 vecLib F 0x8bde2000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib at 0x8bde2000 (offset 0x0)
69 libmx.A.dylib - 0x81c90000 dyld Y Y /usr/lib/libmx.A.dylib at 0x81c90000 (offset 0x0)
70 libCGATS.A.dylib - 0x917b6000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib at 0x917b6000 (offset 0x0)
71 libCSync.A.dylib - 0x907c7000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib at 0x907c7000 (offset 0x0)
72 libPDFRIP.A.dylib - 0x91b10000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib at 0x91b10000 (offset 0x0)
73 libPSRIP.A.dylib - 0x91b50000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib at 0x91b50000 (offset 0x0)
74 libRIP.A.dylib - 0x91b80000 dyld Y Y /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib at 0x91b80000 (offset 0x0)
75 libssl.0.9.7.dylib - 0x96aa0000 dyld Y Y /usr/lib/libssl.0.9.7.dylib at 0x96aa0000 (offset 0x0)
76 libcrypto.0.9.7.dylib - 0x91969000 dyld Y Y /usr/lib/libcrypto.0.9.7.dylib at 0x91969000 (offset 0x0)
77 libvMisc.dylib - 0x95f00000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib at 0x95f00000 (offset 0x0)
78 libvDSP.dylib - 0x95e40000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib at 0x95e40000 (offset 0x0)
79 libBLAS.dylib - 0x954c0000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib at 0x954c0000 (offset 0x0)
80 libLAPACK.dylib - 0x95b20000 dyld Y Y /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib at 0x95b20000 (offset 0x0)
81 libnet.jnilib - 0x80d6b000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libnet.jnilib at 0x80d6b000 (offset 0x0)
82 libawt.jnilib - 0x81070000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libawt.jnilib at 0x81070000 (offset 0x0)
83 Cocoa F 0x90ec0000 dyld Y Y /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa at 0x90ec0000 (offset 0x0)
84 WebKit F 0x914ad000 dyld Y Y /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit at 0x914ad000 (offset 0x0)
85 libfontmanager.jnilib - 0x80fd0000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libfontmanager.jnilib at 0x80fd0000 (offset 0x0)
86 JavaScriptCore F 0x9419b000 dyld Y Y /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore at 0x9419b000 (offset 0x0)
87 WebCore F 0x97900000 dyld Y Y /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.framework/Versions/A/WebCore at 0x97900000 (offset 0x0)
88 libxslt.1.dylib - 0x806c0000 dyld Y Y /usr/lib/libxslt.1.dylib at 0x806c0000 (offset 0x0)
89 libcmm.jnilib - 0x81060000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libcmm.jnilib at 0x81060000 (offset 0x0)
90 libsuncmm.jnilib - 0x80560000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libsuncmm.jnilib at 0x80560000 (offset 0x0)
91 libjpeg.jnilib - 0x80e70000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libjpeg.jnilib at 0x80e70000 (offset 0x0)
92 liblaf.jnilib - 0x7b5ac000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/liblaf.jnilib at 0x7b5ac000 (offset 0x0)
93 libnio.jnilib - 0x80d90000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libnio.jnilib at 0x80d90000 (offset 0x0)
94 libdcpr.jnilib - 0x81000000 dyld Y Y /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libdcpr.jnilib at 0x81000000 (offset 0x0)
(gdb) Reading symbols for shared libraries . done
$1 = (void *) 0x39b51c20
call (void *)dlsym($1, "inject_start")
(gdb) $2 = (void *) 0x34f77b48
disassemble jio_vfprintf
(gdb) Dump of assembler code for function jio_vfprintf:
0x949142d0 <jio_vfprintf+0>:     mflr     r8
0x949142d4 <jio_vfprintf+4>:     bcl-     20,4*cr7+so,0x949142d8 <jio_vfprintf+8>
0x949142d8 <jio_vfprintf+8>:     mflr     r2
0x949142dc <jio_vfprintf+12>:     mtlr     r8
0x949142e0 <jio_vfprintf+16>:     addis     r7,r2,4065
0x949142e4 <jio_vfprintf+20>:     lwz     r6,28248(r7)
0x949142e8 <jio_vfprintf+24>:     lwz     r12,0(r6)
0x949142ec <jio_vfprintf+28>:     cmpwi     r12,0
0x949142f0 <jio_vfprintf+32>:     beq-     0x949142fc <jio_vfprintf+44>
0x949142f4 <jio_vfprintf+36>:     mtctr     r12
0x949142f8 <jio_vfprintf+40>:     bctr
0x949142fc <jio_vfprintf+44>:     b     0x9493ded0 <dyld_stub_vfprintf>
call ($2)("/System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/libclient.dylib", "/tmp/stacktrace32624data", 515)
End of assembler dump.
detach
(gdb) $3 = 0
quit
================================================================================
Full thread dump Java HotSpot(TM) Client VM (1.4.2-56 mixed mode):
"Stack Trace Remote Thread" prio=5 tid=0x38ba02c0 nid=0x350b0800 waiting on condition [0..f1142260]
"Inactive RequestProcessor thread [Was:Default RequestProcessor/org.netbeans.modules.navigator.Navigator$ActNodeSetter]" daemon prio=1 tid=0x38b9ffe0 nid=0x3a77a400 in Object.wait() [f10c1000..f10c1b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x19b98b68> (a java.lang.Object)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
     - locked <0x19b98b68> (a java.lang.Object)
"Inactive RequestProcessor thread [Was:TimedSoftReference/org.openide.util.TimedSoftReference]" daemon prio=1 tid=0x38b9fd20 nid=0x3a7c8600 in Object.wait() [f0fbf000..f0fbfb20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x19b98bc0> (a java.lang.Object)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
     - locked <0x19b98bc0> (a java.lang.Object)
"Inactive RequestProcessor thread [Was:TimedSoftReference/org.openide.util.TimedSoftReference]" daemon prio=1 tid=0x38b9f230 nid=0x3a7bc200 in Object.wait() [f0c08000..f0c08b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x19b98c18> (a java.lang.Object)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:692)
     - locked <0x19b98c18> (a java.lang.Object)
"VCS Command Tasks Starter Loop" daemon prio=1 tid=0x3893cbf0 nid=0x35747000 in Object.wait() [f174e000..f174eb20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
     at java.lang.Object.wait(Object.java:429)
     at org.netbeans.modules.vcscore.commands.CommandProcessor.executorStarterLoop(CommandProcessor.java:757)
     - locked <0x9d08158> (a org.netbeans.modules.vcscore.commands.CommandProcessor)
     at org.netbeans.modules.vcscore.commands.CommandProcessor.access$700(CommandProcessor.java:65)
     at org.netbeans.modules.vcscore.commands.CommandProcessor$5.run(CommandProcessor.java:776)
     at java.lang.Thread.run(Thread.java:552)
"MDR event dispatcher" daemon prio=6 tid=0x005ed550 nid=0x1e35e00 in Object.wait() [f13c7000..f13c7b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0xa660060> (a java.util.LinkedList)
     at java.lang.Object.wait(Object.java:429)
     at org.netbeans.mdr.util.EventNotifier$EventsDelivery.run(EventNotifier.java:257)
     - locked <0xa660060> (a java.util.LinkedList)
     at java.lang.Thread.run(Thread.java:552)
"DestroyJavaVM" prio=5 tid=0x00501180 nid=0x1801600 waiting on condition [0..f0800270]
"TimerQueue" daemon prio=5 tid=0x005c7ab0 nid=0x35284400 in Object.wait() [f1244000..f1244b20]
     at java.lang.Object.wait(Native Method)
     - waiting on <0xa16e4b0> (a javax.swing.TimerQueue)
     at javax.swing.TimerQueue.run(TimerQueue.java:231)
     - locked <0xa16e4b0> (a javax.swing.TimerQueue)
     at java.lang.Thread.run(Thread.java:552)
"AWT-EventQueue-1" prio=6 tid=0x0051e500 nid=0x1c19a00 runnable [f11c1000..f11c3b20]
     at java.io.UnixFileSystem.getBooleanAttributes0(Native Method)
     at java.io.UnixFileSystem.getBooleanAttributes(UnixFileSystem.java:221)
     at java.io.File.exists(File.java:680)
     at org.netbeans.modules.masterfs.MasterFileObject.isValid(MasterFileObject.java:78)
     at org.netbeans.modules.masterfs.Cache.get(Cache.java:62)
     at org.netbeans.modules.masterfs.Cache.getOrCreate(Cache.java:83)
     at org.netbeans.modules.masterfs.MasterFileObject.getFileObject(MasterFileObject.java:274)
     at org.openide.filesystems.FileObject.getFileObject(FileObject.java:563)
     at org.openide.filesystems.FileUtil.createFolder(FileUtil.java:204)
     at com.sun.rave.api.jsf.project.JsfProjectHelper.getPageBeanRoot(JsfProjectHelper.java:116)
     at com.sun.rave.api.jsf.project.JsfProjectHelper.getBasePathForJava(JsfProjectHelper.java:786)
     at com.sun.rave.api.jsf.project.JsfProjectHelper.getJspForJava(JsfProjectHelper.java:828)
     at com.sun.rave.project.jsfloader.Utils.findJspForJava(Utils.java:67)
     at com.sun.rave.project.jsfloader.JsfJavaDataObject.getCookie(JsfJavaDataObject.java:62)
     at com.sun.rave.insync.Util.retrieveDocument(Util.java:97)
     at com.sun.rave.insync.SourceUnit.grabDocument(SourceUnit.java:106)
     at com.sun.rave.insync.SourceUnit.sync(SourceUnit.java:429)
     at com.sun.rave.insync.beans.BeansUnit.syncSubUnits(BeansUnit.java:200)
     at com.sun.rave.insync.faces.FacesPageUnit.syncSubUnits(FacesPageUnit.java:225)
     at com.sun.rave.insync.beans.BeansUnit.sync(BeansUnit.java:174)
     at com.sun.rave.insync.live.LiveUnit.sync(LiveUnit.java:288)
     at com.sun.rave.insync.live.LiveUnitWrapper.sync(LiveUnitWrapper.java:115)
     at com.sun.rave.insync.models.FacesModel.syncImpl(FacesModel.java:899)
     at com.sun.rave.insync.Model.sync(Model.java:207)
     at com.sun.rave.insync.ModelSe

6th Gen iPod Nano won't sync to Powerbook G4 1.5 Ghz PowerPC iTunes 9.2

My iPod classic bit the dust so I bought a new iPod Nano 6th Gen. My Powerbook G4 1.5 Ghz PowerPC can only run iTunes 9.2. From what I can tell this new iPod Nano won't work with my Powerbook, which is hard to believe since my old school iPod from the early 2000s worked great until I dropped it and it split in half.
My iPhone 3Gs syncs fine so it is incredibly annoying and disturbing that a new iPod Nano 6th gen. won't sync.
If in order to get this iPod Nano to work with my current system I'm required to upgrade my iTunes from 9.2 to 10 then I need to upgrade my OS from OS 10.4.11 to OS 10.5 which requires that I upgrade computer by purchasing an entirely new laptop then I might just have to revert to my old school Sony DiscMan.
My iPod Classic 2nd gen. worked great until it broke and my iPhone Gs syncs great, so I can't believe that this new iPod Nano 6th gen. won't work without a simple fix.
Come Apple, don't fail me now.

Your problem is completely different from the original post. The OP could not run the correct version of iTunes on their older computer. You're much more likely to get the help you need by starting your own thread with a properly descriptive subject line.
If you need instructions on how to start a new thread, see this link:
http://discussions.apple.com/ann.jspa?annID=650
Best of luck.

Harddrive from a powerbook g4 17 into a powerbook g4 1.33 ghz with OSX Tiger already installed.

Hi,
Quick question.
I have put a harddrive from a powerbook g4 17 into a powerbook g4 1.33 ghz with Tigeralready installed.
Was this and is this a bad idea or is it ok if I just check/repairpermisions or wil this cause lots of problems and I should reinstall OSX?
I know with windows this would never work but I don’t knowif OSX really controls how the mac runs of if its just the firmware alreadythere.
First boot it worked and I was in Tiger for about 5 min but then I added ram and it just try’s to boot into OSX now but after 20min of waiting I reset the powerbook.
thanks.
Sam

thanks, I think your correct normnod but Im not sure if it includes updates and if they are machine Specific.
It was from 17 inch 1.67ghz to a 12 inch 867Mhz and like a say it boot the first time but now I get a small
blip sound when I press the power button and no dong sound so maybe I did mess something up.
I did try pulling the battery and using shift > control > option andpower and I got no boot and blank screen again
(this is model A1010) sorry its wrong title.
and then the second time I got fan sound a dvd rom drive running but nothing on the screen and again no dong.
seeing if leaving it without its battery overnight will help by resetting everything.
I might have apple jack installed on the harddrive already if thet will help? but i still need a dong to get into that.
Sam

My Powerbook G4 1.5 GHz turns on with blank lit screen (non of my desk top, or anything else info appears). Help!

How do I get to reset my Powerbook G4 1.5 GHz if the screen is all light but no info (desktop-icons, ... only light blue screen).
Please help. Thank you.

You will have a better chance of getting an answer if you re-post over on the Powerbook community.
https://discussions.apple.com/community/notebooks/powerbook

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

IMac 8.1 3.06 GHz w/6 MB Ram, Lion and dead HD? all I get is "Gray Screen w/wirlie gig" but now for a new twist a circle with a diagonal line, like don't go. Is this a DEAD HD?

          I have a iMac 8.1 3.06 GHz w/6 MB Ram, and was running Mac OS X 10.6.8. My 500 GB WD5000AAKS was about 90% full. I had an issue with the admin password, it would not accept any of my known passwords. I ran for a while on the fingerprint reader I had, we have two users on the machine in our home. I tried many attempts to fix this problem without success I came up with a plan. That plan was a new HD, used a 2TB Samsung. plan worked like a charm. Installed a 4 GB Ram Chip and the new Samsung, formatted it, loaded Snow Leopard, and loaded what was on my Time Machine backup all was good.
          This was early July, then Lion was available I was happy with what I had, I had 1.450 TB of free space. So, what the heck, lets spring for Lion, that even went well for a not even 2 weeks, enough that I had several Time Machine backups.
           Then monitor goes flash, flash then I try a re-boot same gray screen with whirlie gig that I had when the the HD in my MacBook Pro died. Put the old 500 GB WD back in and all was fine, ran for a day. It was OK except back to no password and full. Went down to my local computer shops here in Rayong Thailand and sprung for a New 2 TB WDXXX, put that in, used my Snow Leopard disk to format and load OS X 10.6.8. I though that all was good, the load from Time Machine was slow and the time remaining was changing all the time, took about 3 hrs for about 300 MB that where on the LaCie.
          Now I have a password issue, however it asks for a password reset that it will NOT take and I don’t even get that now. All I get is the infamous “Gray Screen w/wirlie gig” but now for a new twist a circle with a diagonal line, like don’t go. Is this a DEAD HD? I plan to re-install the old 500GB just to systems check and if all is well I will take the “NEW” 2 TB WD back for replacement. I am thinking that I should put the new HD in and format and load Snow Leopard then up date to Lion then do my Time Machine backup. The only problem is does the circle with the diagonal line mean something more? If so how does one recover Lion with no disk if that is what I need to do. Yes, I have tried control “R” on boot, nadda, no response, “mai dee” no good. Ideas, please.

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

I have a macbook pro 15" Retina Display with 2.6 ghz and 8gb of ram yet when i try to download a HD movie from itunes it says my computer doesn't support HD?

i have a macbook pro 15" retina Display with 2.6 ghz and 8gb of ram when i try to download an HD movie from itunes it says my computer doesn't support HD? i went to the support on the apple website and looked at the specs that a computer has to meet in order to play HD movies and mine is well above them. Why can't i play the movies?

That would at least partially explain it.
These MacBook Pros drew more power than the power brick could readily supply, and so would only run at top speed when the power brick was supplemented by the battery.
Though the applicable tech note has been removed, it stated:
"If the battery is removed from a MacBook or MacBook Pro, the computer will automatically reduce the processor speed. This prevents the computer from shutting down if it demands more power than the A/C adapter alone can provide."

Ok,I am looking to put MAC OS 10.5.6 on my powerbook g4 1.5mhz w/ 1.25gigs of ram. I found a copy of 10.5.6 but the seller says that you can't update it to .8 is this true?

Ok,I am looking to put MAC OS 10.5.6 on my 12" Al powerbook g4 1.5mhz w/ 1.25gigs of ram. I found a copy of 10.5.6 but the seller says that you can't update it to .8 is this true?

Before installing 10.5 make sure of the following: https://discussions.apple.com/docs/DOC-2275

I have a MBPro 2.4 Ghz with 2 GB ram max. is there anyway to add more ram?

so this might be a really stupid question
I have a MBPro 2.4 Ghz with 2 GB ram max. is there anyway to add more ram?

unfortunately i don't have the manual anymore
Model Name:          MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
SMC Version (system):          1.16f11
I've read that max'ing out ram isn't the best thing to do. also i've read that some memory chips are faster than others?
thanks for all your help

My PC (XP, 2 GHz Celeron, 768 M ram) does not meet the minimum requirements for upgrade to version 6, so how can I stop Firefox from nagging me to upgrade?

I would LIKE to install version 6, but since my machine (XP, 2 GHz Celeron, 768 M ram) does not meet the system requirements there is no reason to continue the annoying nag screens.

I would LIKE to install version 6, but since my machine (XP, 2 GHz Celeron, 768 M ram) does not meet the system requirements there is no reason to continue the annoying nag screens.

Can I run OS 10.2 on a PowerBook G4 1.67 GHz?

I need to use an old OS9 application but can't run it on my MacBook Pro. So I got my old PowerBook G4 out, which is running OS 10.5.8 and OS 9.2 on it. It appears 10.5.8 won't run OS9. So I tried to do a clean install of 10.2 from a PowerBook G4 software install disk...although I'm not sure if this disk is for the 1.67 GHz or my even older PowerBook G4 Titanium.
The long and short of it is that the PB G4 1.67 GHz won't read the OS 10.2 system install disk - using the C key on restart.
Does anyone have any ideas how I can backward install to OS 10.2?
Regards

Furthermore, you have to find the correct Powerbook G4 restore discs to restore 10.3.7 through 10.4.2 onto a partition or Firewire hard drive, and then use the Mac OS 9 restore installer from those discs to install 9 so Classic can run in the background on 10.3.7 through 10.4.11. Starting with 10.5 Classic could not run. Only a very few Powerbook G4s had boot access to Mac OS 9 while 10.5 was installed:
http://discussions.apple.com/thread.jspa?threadID=1379979
The rest required 10.4.11 or less to be installed on a Firewire hard drive or Partition, and 9 restored from the prebundled discs that came with the Mac in question. And for those only 9 as a Classic environment without most of the drivers would run.
See my FAQ*:
http://www.macmaps.com/macosxnative.html
for possible alternatives.
- * Links to my pages may give me compensation.
Message was edited by: a brody
Message was edited by: a brody

Powerbook Titanium 1.0 Ghz - Operating System Options ?

Hey, question for anybody who can help me in the right direction. I have a Powerbook G4 Titanium 1.0 Ghz that currently has 10.4.11 installed on it. I alos have 1 gig worth of ram installed in it (2x512MB cards). I believe from the research I have done so far that the .11 was an update that
was done on it. I don't know exactly what version 10.4.? it was before this upgrade.
I would like to buy an operating system install disk just for back-up,
or maybe even a new install on a new hard drive. Can somebody tell me of my
options of the operating system version numbers that I can put on this PB.
Oh, if I believe correctly that this PB has Tiger 10.4.11 with the update.
Feel free to correct me if I am wrong in any of this and please post a reply
with my options as far as which OS disks I should look to buy.
I have read different opinions about being able to put 10.5.?? leopard on it.
is this true or not if anybody knows, is there a leopard version that can work
on a G4. I have heard that if you do not have a G5 system then some disks won't work ?? thanx for the reply if you can help me out, Jason

...this firewire adapter...
I didn't say anything about a FireWire "adapter". I recommended buying a Firewire hard drive.
...Once I get the whole drive copied over to the external drive can I then use that drive internally...
No. An external drive is an external drive. If you buy one, use it as your backup.
...or do you think it will not actually boot up by itself.
Yes, if it has the Oxford chipset and you make a bootable clone on it, it will boot the Powerbook just fine via FireWire.
If I make a complete copy, can I use it as my only master copy or will it not copy the boot files necessary to start the computer up on it's own?
You won't want to have only one copy of anything. The purpose of backing up is to prevent the loss of your valuable files if the hard drive they're stored on fails...as every hard drive will do, sooner or later. You need two copies of everything important — on two different drives.
This is the main thing I am trying to do, and to use the internal hard drive as the back-up itself, only when needed.
This is a wrong-headed idea. Your internal drive should be your primary drive. An external drive should be used for backup. If you store any data on the external drive that isn't also on the internal, that data should be backed up on a second external drive.
If your internal drive isn't big enough to store all the data to which you need ready access, replace it with a bigger internal drive.

Powerbook G4 1.25 GHz 1.5 MB RAM

Similar Messages

Maybe you are looking for