PowerBook G4 1.33 wont boot from DVD drive after upgrade

Can anyone offer some assitance. I just upgraded my PowerBook G4 1.33 from a Combo Drive to a Panasonic SuperDrive. Also upgraded to a 250GB harddrive. Got a tree error on HD and when I went to boot up Diskwarrior I could not boot from the DVD drive. It does not come up as a bootable drive. Tried Holding down "C" key "Option Key" nothing works. Can anyone tell me what's wrong? All other drive functions work perfectly.

Hi chubbs899, and a warm welcome to the forums & Macdom!
i have read says you can go in through disk utility and partition the drive but i still have yet to see anything that says something about disk utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
it gives you the option of doing "journal" format or "case sensitive, journal" format.
Don't use Case Sensitive, confuses many Apps.
i suspected jumper settings but when i read through the manual on the WD website it didnt seem to say anything about doing something specifically for apple. it had a jumper for slower transfer rate 1.5Gb/s
Yes, it needs that jumper on pins 5&6.

Similar Messages

G5 wont boot from hard drive after install

ok, so i bought my G5 from the school i go to but under their confidential stuff they had to take the hard drive from the computer before they could sell it to me. i thought that would be just fine as i could just get a new hard drive to replace it. turns out im having much more trouble then i thought. the hard drive i am using is a 1Tb western digital WD10EALS (http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=1400&p_created=&p_pv=2.295&pprods=227%2C295). when i install the disk it boots from the leopard retail disk and it reads the hard drive just fine. i select it and it goes through the install successfully. upon rebooting though, i get the blinking folder with the question mark on it. a lot of the stuff i have read says you can go in through disk utility and partition the drive but i still have yet to see anything that says something about disk utility. when it asks where to install OS X it shows the 900 some Gb of my hard drive and when i hit options the only options it has are upgrade, archive and install, and erase and install. and when you do erase and install it gives you the option of doing "journal" format or "case sensitive, journal" format. i suspected jumper settings but when i read through the manual on the WD website it didnt seem to say anything about doing something specifically for apple. it had a jumper for slower transfer rate 1.5Gb/s one called SSC which i guess is for radio interference.
any help would make me super happy, i am a computer technician and the reason i bought this computer was to step up my apple game. but having some trouble right now. thanks for taking the time to read this!
Message was edited by: chubbs899

Hi chubbs899, and a warm welcome to the forums & Macdom!
i have read says you can go in through disk utility and partition the drive but i still have yet to see anything that says something about disk utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
it gives you the option of doing "journal" format or "case sensitive, journal" format.
Don't use Case Sensitive, confuses many Apps.
i suspected jumper settings but when i read through the manual on the WD website it didnt seem to say anything about doing something specifically for apple. it had a jumper for slower transfer rate 1.5Gb/s
Yes, it needs that jumper on pins 5&6.

Not booting from DVD drive | Flashing Question mark and face folder SOS!

Hey there! I am hoping one of you folks can help.
I noticed my iMac running really slow.
I could not find my OS disks, so I bought OS X Leopard
When I tried to boot from DVD it would flash the question/face folder for about 30 seconds then reboot normal. (I was able to install the OS. Just can't boot from the disk in order to run disk utility)
Time got away from me and now my system is REALLY slow...
I went and bought Disk Warrior
Same issue, only my drive spits out that disk. (I can run and burn other disks)
I won't discuss my failed attempts at getting help from the Apple store and by having the geniuses (not) call me. I would rather not pay an arm and a leg to have an approved repair center run the disk utility for me. I've already spent $169 on the OS and $100 on Disk Warrior... PLEASE HELP

I think you are going in a totally wrong direction. Your profile indicates you have Leopard (10.5.X) however I don't believe that what you recently purchased. I think you purchased Snow Leopard (10.6.X), these are two totally different OS's! Unless you got extremely lucky and found someone selling 10.5.x then naturally you would have the problem you did trying to boot from it. My advice is:
1. Look to see what version of OS X you are running (click the Apple in the upper left of this screen and then choose About this Mac) then cross check what version of the OS you recently purchased.
2. If you are running 10.5.x then you will need to call Apple and purchase replacement discs for a nominal charge. Once received you should be able to boot from that disc and run Disk Utility from it.
3. If you are running 10.6.x then re post (with an updated profile) so we can determine what the next step is.
It seems like you don't know what you are doing and in an effort to save money you are probably going to spend more than taking your machine to an Apple Authorized Service Provider.
Regards,
Roger

Not booting from DVD drive | Flashing Question mark and face folder S

Hey there! I am hoping one of you folks can help.
I noticed my iMac running really slow.
I could not find my OS disks, so I bought OS X Leopard
When I tried to boot from DVD it would flash the question/face folder for about 30 seconds then reboot normal. (I was able to install the OS. Just can't boot from the disk in order to run disk utility)
Time got away from me and now my system is REALLY slow...
I went and bought Disk Warrior
Same issue, only my drive spits out that disk. (I can run and burn other disks)
I won't discuss my failed attempts at getting help from the Apple store and by having the geniuses (not) call me. I would rather not pay an arm and a leg to have an approved repair center run the disk utility for me. I've already spent $169 on the OS and $100 on Disk Warrior... PLEASE HELP

Hey,
No, I'm not running Snow Leopard. Running Leopard. 10.5.8
I'm guessing the problem is either with my computer itself, or perhaps the DVD drive. Hard to tell. Maybe even something corrupt in my software?
My problem is:
I desperately need to run a disk utility of some sort, however am not able to make my computer use my OS disk or Disk warrior as a startup disk (either by holding down C, or by assigning it in System Utilities.)
I was hoping someone might have a tip, or trick to get my machine to use one of these disks as the startup disk.
Thanks!

DV7-6185us wont boot from hard drive.

I recently installed a new hard drive after the one it came with completely crashed. After installation of new hard drives, I inserted and installed all of the recovery disks needed for the new hard drive. Upon completetion it said it needed a restart and after restart I get a message saying I need a OS for the hard drive for boot up.
I went into my bios to make sure the hard drive was first in boot order which it is but when trying to pick where to put from on the bios screen it only give me the cd option. I ran a full diagnostic of the hard drive and everything checks out. I made sure to unplus the hard drive and tried a different slot and still get the same thing. Installation when fine but still won't boot from hard drive.
Is there something that i'm missing? The hard drive is fine. So what could it be?

Hi,
Assuming this is just a problem with the recovery media, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source - Digital River.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My Mac Pro flashes the question mark and wont boot from hard drive, flash, or Cd... Please help!

My Computer froze so I shut it down... When I tryed to boot up again it wouldn't power up. After a few tweeks I got it to power up but now it wont boot from the hard drive, flash drive or a cd. It want to start, then, after a few seconds it stops. Not sher what to do. Can anyone help?

Have you tried Safe Boot?
You also might reset PRAM and reset SMC.
Have you tried booting with the Recovery System? See its possibilities here.
From there you can make repairs to your primary startup partition.
Do you have a backup? If not, do you have an external drive large enough to back up your primary drive? It would be good to have one in case your drive needs repair or replacement.

Cannot boot from ext drive after 10.5.2 update

I followed the procedure in tech article 306502 for creating and updating a bootable drive. I am in a PPC Mini environment. External drive is LaCie 160 GB rugged firewire portable with auxiliary power, I created the drive with 10.5.1 and it booted nicely to my two Minis (running 10.3.9 and 10.5.1). I then updated the external system with 10.5.2 from the Apple site and now it does not boot. Sits and spins with a white screen, grey apple, and whirligig. Whirled for 1/2 hour and tried deveral times.
I see this is not uncommon, but there have been no cures posted. One post suggested Disk Warrior. What would I do to with DW to move this problem forward. This is quite annoying, as I rely on being able to move around and boot from this drive when needed.
Thanks for any help.
Fred

after 10.5.2 two days ago, mine booted up regularly. however after the additional leopard graphics update last night, it no longer boots up at all. i have to usethis ****** vista to report the problem. my macbook is right beside me, with nothing but a plain blue screen. occasionaly the mouse cursor appears for about 30 seconds, then dissapears and the screen remains blue. what can i do? if i cant log in apple cant update my mac!!! help!!!

Imac wont boot from DVD

just got my imac back after hard drive replacement, but it will not boot from the dvd? and now I can't get the dvd out?

Zap the PRAM and Reset the SMC, then try again.
As for the stuck disc, this is the simplest, from LousyFool's link, if restarting, holding down the mouse doesn't do the tridk.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray. If you have an external drive, e.g. the MacBook Air Superdrive, use "drutil eject external".

How do I fix my early 2008 mac pro boot hard disk. Lost everything when it crashed hard, can not reinstal via cd/dvd drive... are there any fix get it boot from dvd drive?

I have an early 2008 MAC PRO Quad Core 3.0ghz processor. 8 Gig of rams, with a 1 Gig memory Radeon 5770 HD Graphic Card running the latest Version of Snow Leopard OS. Last week lighting struck the house take out all of my hard drives (4) thank god the surge protector mitigated the mother board from damaged, use the Parted Magic to check out the motherboard and it intact with no damage. I can boot with the Parted-magic and be able surf and post this question to this forums. I replaced a newly formatted hard drive and trying to installed OS X Mountain Lions to the new drive, but unable to have it boot in my MAC PRO DVD, I get the usual chimes during the booting processed but the screen remain blackout, but able to boot with Parted-Magic to surf the web and access Apple sites/forums.
I am not well verse in using the Parted_Magic to repair or get my-mac to boot normally so I can reinstall OS X. Any help would appreciated.
Thank you
Disabled Veteran.

Go to System Profile and look, does it say "MacPro3,1"?
That is 2008.
FBDIMM would be 800MHz. Did you use older slower 667MHz in yours?
You can but take a hit in performance.
Sounds like MacPro1,1.
Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM)
In 2007 March an 8-core 3GHz did come out 2,1.
So just to be clear.
===========
It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area,
Whenever you want to install Windows, remove all the drives other than the one Windows goes to. And if you use a dedicated drive YOU DO NOT NEED Boot Camp Assist, unless you use XP, which really is limited and crippled (one processor, 1.9GB RAM support).
And when it freezes, your only choice is to nuke (reformat) and restore or get out that backup CLONE you made before (ie, Step #1 in the Boot Camp Guide).
Sure that whole NTFS / MBR / GUID could be an issue, but you should just have a blank drive or clone.
No don't bother Apple, they seem to not have a good sense about Windows on Mac Pro anyway.
Other than zap pram from cold boot / tried booting with NO drives inside and just 10.6. DVD - should be fine.
You should be fine iwth Windows 7 DVD and one drive, or even XP.
Make sure you take your time and reconnect cards etc properly and any cables.
Booting from OS X DVDs may not work if there is a drive with a totally shot directory or partition table. Put them in FW case and turn on AFTER OS X is booted.
Why aren't people Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.2
How To clone

Z87-GD65 wont boot from any drive, please help!

I desperately need your help on this issue. And thanks in advance for any answer!
I have a brand new Z87-GD65 Mainboard.
When I select my boot device in BIOS all I get is: "Reboot and select proper boot device or insert boot media in selected boot device and press a key"
In BIOS I can find all my hardware (CPU, Drives, HDDs, DVD,... RAM) everything is shown correctly. Nothing missing there, all parts shown by correct values.
I cant boot through my DVD Drive or external USB Drive (on both I have Windows 7 which I want to install on my new system). The Windows DVD is also working properly, I checked it on my old PC.
No matter what Boot priority/device I choose (I think Ive tried them all by now) "Reboot and select proper boot device or insert boot media in selected boot device and press a key" is what I get after "save & reboot".
My BIOS Version is E7845IMS V1.8.
Any suggestions, what am I missing?
thank you very much for any help!

Quote from: Jimmy_123 on 09-May-14, 01:26:52
Ok, thanks for your help, I found the problem!
It was my DVD Rom Drive that could not read the DVD!!!!
What I Still dont understand is that it also didnt boot from a bootable HD through USB.
thanks for your help!
Glad you got it working....probably the controller got confused from the faulty DVD rom....

MS-6728 won't boot from DVD drive?

I have a MS-6728 motherboard with bios v2.5 that won't boot from a bootable DVD disk. Here's what I've tried so far:
- Made sure the DVD drive was the first one in the BIOS boot device list.
- Tried two different DVD drives. One plain DVD drive. The other was a DVD dual layer writer. Both were PATA.
- Booted the DVD from three other machines to confirm it's not the DVD disk. It worked fine on all of them.
- Put the DVD drive from one of the machines that booted it correctly into the MS-6728 machine. That didn't fix the problem.
- Removed all drives except the PATA DVD drive and one SATA hard drive. No luck.
- Booted the MS-6728 machine from a bootable CD. That worked it was a Windows XP Pro install CD.
The DVD is a Debian install DVD BTW. Also I tried it each time by doing the F11 (select boot device) and just letting the BIOS auto detect everything. Each time I see a quick flash of "boot record not found" but I know the DVD is bootable since it worked with three other machines. The DVD was made from a ISO image downloaded from the net. I have booted the machine several times before from CDs.
I'm wondering if the BIOS only supports bootable CDs and not bootable DVDs?
Any ideas would be greatly appreciated.

How many IDE controllers does you board have? If it has more than 2, make sure that the DVD drive is connected to Intel controller and not Promise Controller.

Qosmio F30-140 - Cannot boot from DVD Drive

Dears,
I faced problem in DVD drive, I can't boot from it... actually, it didn't see and CD or DVD when I insert it...
So how can boot from it to reinstall windows?????? Or how can I use external USB DVD to boot from it???
I have F30-140, with updated BIOS...
please neeeeeeed help..

Hi
Sounds like CD/DVD drive has developed a hardware problem.
Usually you should be able to boor from ODD by pressing C button immediately after the notebook was powered up.
You can also press F12 at the beginning. This would enable the boot menu on the screen.
There you can choose ODD as boot source
If this will not function, then the ODD could be defect.
PS: I doubt the BIOS supports booting from USB CD/DVD drive...

I had to erase and reinstall mavericks to hd, now i cannot boot up , i get a folder with flashing Q mark and i cannot boot from dvd drive...Ideas please

hi
its a long and sorry story, i have a imac running mavericks
a few days ago i noticed that the dvd drive was ejecting every disc i put in, so i decide to check hd with onyx and reset permissions etc
onyx said the smart status couldnt be checked and i should check hd using disk utility.
i did this and it came up that hd had errors , so i ran the repair facility....it came up with disk can not be repaired, reformat and reinstall mavericks
this i did.
i reinstalled mavericks into mac hd, which took about 3 hrs, i then rebooted and a folder with flashing Qmark appeared, i cant get past this at all.
i have tried to use internet recovery but it comes up with 6002f error, and the dvd drive still does not accept boot disk, so i am at a lose as to how to proceed
anybody got any ideas?
thanks
L

If your hard drive has SMART errors then it is failing and should be replaced. Disk Utility cannot fix SMART reported errors.

K8M Neo-V won't boot from hard drive after BIOS flash

But it boots just fine from CD or floppy.
I bought the combo (MB, AMD64 processor, 1G memory) to replace a
motherboard which had died in a previously working system. At the
same time I replaced the power supply and the video card. When I first
fired it up, it brought up the boot manager from the previous incarnation
of the system, which had been an Athlon-XP.
I never actually let it reboot, since I wanted to redo the OS optimized
for the AMD64 (and the new video card.) I flashed the motherboard to the
most current version of the BIOS (AMI version 3.5), booted from CD and
installed the OS. Once I got to the point of being able to boot from the
new system, I removed the CD and proceeded to reboot.
It displayed all the possible boot devices (note that the floppy and CD
were empty):
Searching for Boot Record from floppy..not found
Searching for Boot Record from CD/DVD..not found
Searching for Boot Record from IDE-0..not found
No matter what I did, I couldn't get the system to boot from the hard
drive. I reflashed the BIOS back to 3.2, still didn't work. Since then I
have installed four different operating systems: Win2k, WinXP, Gentoo
Linux and Debian Linux. All boot from CD, install perfectly until you get
to the part where the system has to boot on its own, and then nothing.
Has anyone seen this? Is it possible that there is a problem with how
I've set the BIOS up? Or a hardware conflict with something else? Or
just a bad MB?
Thanks for any advice.
Steve

Notihng special in the BIOS drive setup. Everything is auto-detected and I've pretty much left those settings alone. At the time of the first flash I probably *did* have SMART enabled. Once I started having trouble I turned that off, and have never turned it back on.
Boot order has been changed multiple times. Right now it is floppy -> cd -> ide-0. I've turned the network boot option off and on again (not that there's a boot server handy...) I've tried hitting F11 to choose my boot device and specifically selected the HD. Hasn't made any difference.
I generally turn virus protection off the moment I get a new motherboard. I'm pretty sure it came disbaled by default, if not I'm sure I disabled it. Even had it been on, though, any boot block corruption would have to be permanent damage to act like it has, since four subsequent OS installs should have overwritten the boot block four times over.
It might be worth my time to drop a different HD in the primary master slot and see if it can boot from that. I'll be real unhappy if I've toasted a perfectly good drive.

Macbook Pro will not boot from any source after upgrade

Hi,
I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on button in until it finally shuts down for good.
I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device - I just haven't figured out how to boot from this device as yet.
I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point. After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
Tony

Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
Tony

PowerBook G4 1.33 wont boot from DVD drive after upgrade

Similar Messages

Maybe you are looking for