Powerbook g4 cannot access linksys access point

I have an unencrypted access point that I cannot hit with the powerbook. I can easily connect with my pc notebook. The access point is transmitting on channel 6 rather than on the default of 11.
I can only access the access point in a computer to computer mode that will not allow internet access.
I am a pc user trying to help my mom. Last time I did this I believe that I changed the channel of my access point. I also had an encrypted access point that her gbook tends to prefer.
Any suggestions??
Thanks Jon, for jojo1

try assigning a static ip add on the computer ( 192.168.1.3 ) .. connect it to the router and then try to access http://192.168.0.2

Similar Messages

LGBD390 blu-ray cannot find the access point of WRT160N/3.

I have been trying to set up the wireless connection to be able to view streamed movies from netflix through my LGBD390 blu-ray player. I have successfully connected the wireless router to my Embarq router. When I check status, it says it is enabled and connection is o.k. I have been on the phone with Linksys (and was charged $9.99 which did not solve my problem). I also have chatted and so far that has not worked either. I have downloaded the upgrade for the firmware. No matter what I do, the blu-ray cannot find the access point of the router.
Can you help?

thank you for your responsse Wizzard, but there are things I need to change that I don't know how to do. I have no idea how to assign static ip, subnet and gateway on the blu-ray. When I went to the link , it was actually for adifferent router than mine. I have a WRT160N/v3. I also did not know what to put in the protocol. and if I should just put the number in the beg. and ending. I also don't think I have an ethernet adapter. Maybe you could give me more information. Thanks in advance.

I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

If it's because you were using Office 2004, the eight year old version of Office that was written when Intel processors were not used in Macs, then there will be no fix. Lion dropped support for PowerPC applications, as has been widely reported since Lion's release last August.
You can upgrade Office 2004 to Office 2008 or Office 2011. You can use iWorks 2009 that can open Microsoft files. You can use a number of free applications that are also capable of working with Microsoft documents. You can go back to Snow Leopard, if you have a backup. Or, if you have an external drive or room to add a partition to your current drive, you can install Snow Leopard on it.
Search these forums for more information. If this is your issue, it's been posted and answered several times a day since August 2011.

EA3500 cannot used Guest Access

Hi,
I've a wireless router ea3500 and i've been setup for wireless access, guest access, & internet connection. But i'm wondering :
why if i connect my notebook using Wireless access is different IP with guest access ? how to make the guest access has a same IP with wireless access ? Just for info my wireless access ip = 10.22.xx.xx and my guest access ip is 192.168.xx.xx
After i;ve setup my internet connection, why i cannot login to my wireless router ?
Thanks and Keep Smile

The guest network is a feature of the router that creates a separate network for guests. This virtual network provides internet access to wireless devices for your guests.
In order for the router to work, you need to verify if there is an active internet connection from your modem. You can start from scratch by resetting the router and then check on the links below for different ways on how to configure a router.
Setting up your Linksys router with Cable Internet service using Linksys Smart Wi-Fi
Setting up your Linksys router for DSL connection using Linksys Smart Wi-Fi
Setting up your Linksys router with a static IP account through Linksys Smart Wi-Fi Account

TS1398 Connected to Wi Fi but cannot get Internet access

Connected to Wi Fi but cannot get Internet access Have just done OTA update Dec 1 1012, could this be the problem?

Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70

Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70. Please help!

Here is what it says:
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.

Can FTP-access to field point log file interrupt the running program?

Can FTP-access to field point log file interrupt the running program?
We have a problem where our factory process control program on a Field Pointer suddenly stops the process. We are running the development system on a PC, wich deploys the program on the Field point, with user interface on the PC. Quite often the process stops for no apparent reason. I'm not sure right now if the control program on the Field Point is still running or if it stops. We use FTP from a distant PC (over VPN) directly to the Field Point to check if the process is running, by looking for date and size of log files produced during running process. I've never opened och copied any log file during process run, because this I'm sure this would cause problems for new log entries to be written. But can the mere looking at the log folder via XP-pros ftp-functionality cause the Field Point to have problems writing data to a log file?
I'm not sure how windows XP pro handles "my network places" when it comes to FTP, it look that it keeps some kind of local copy of the folders, or at least the files opened.
Next version of the program will have only basic functionality on the Field Point, leaving logging etc. to another program on the PC, but right now we are stuck with this system.
Ola A

It turned out that the problem lies in the harware of the production machine, it was not a labiew-program problem at all!
Ola

I cannot remember my access code. how can I find it, or turn it off to put in a new code?

i cannot remember my access code. how can I find it, or turn it off to put in a new code?

(click to enlarge)
Connect it to a computer
click sync
then click restore
than restore with the backup created when you synced

Cannot remove the access control entry object on the object because the ACE isn't present

Hello,
I am very new to using Powershell and Exchange Management Shell, and have no prior experience using either of these tools. However, the software I am installing requires me to use the EMS tool in order to set certain permissions for a user in Exchange, which
will be like the admin account.
The command I am attempting to run follows as:
Get-ExchangeServer | Remove-ADPermission -User $newusername -Deny -ExtendedRights Receive-As -Confirm:$False
This throws me an error saying:
cannot remove the access control entry on the object because the ACE isn't present. I've done some research, and have found that this error is quite common, but the solutions do not apply to what I am specifically trying to accomplish. I am simply trying
to remove the Receive-As permission for the admin user that I just created.
Once again, I am very new to Exchange and Powershell, but if there is any advice anyone has, it would greatly appreciated.

I ran this command, and a very long list was displayed, it looks like everything is there.
The weird thing is that I was able to run a previous command which granted Receive-As access to the user I am creating:
Get-ExchangeServer | Add-ADPermission -User $newusername -accessrights GenericRead, GenericWrite -extendedrights Send-As, Receive-As, ms-Exch-Store-Admin -Confirm:$False
The description for the commands to run read to 'grant permissions and to revoke denies, if present'. I'm not sure what this means, but the second part of this pertains to the second command that I am having trouble with:
Get-ExchangeServer | Remove-ADPermission -User $newusername -Deny -ExtendedRights Receive-As -Confirm:$False

Cannot play Adobe Access Protected Content in Chrome (version 30 and higher); Error 3321/3322?

Symptom:
An end-user cannot play Adobe Access protected content. The client application returns a persistent 3321 (Individualization Error) or 3322 (Device Binding Failure) error code.
Root Cause in Chrome Browser:
Adobe Access DRM must create a unique machine identifier (I.e. "token") to identify the the device. This token is provided to the Adobe Access license server during a license request to view DRM protected content. If Chrome Browser disables the ability for Adobe Access DRM to create a unique machine identifier, playback of Protected Content will fail with a 3321 or 3322 error code. By default, this setting is enabled and available to toggle in Chrome Browser version 30 and higher. Unchecking this option will prevent Adobe Access DRM from properly functioning. A 3321 or 3322 error that persists after a call to resetDRMVouchers is an indicator that this setting may need to be changed.
Resolution:
In your Chrome settings:
•             Click on "Show advanced settings…"
•             In the subsequent "Privacy" section, click on "Content settings…"
•             In the subsequent "Protected Content" section, make sure that the following box is checked "Allow identifiers for protected content (computer restart may be required)".
We are working with Google to allow better detection of this condition, so that the client will return a 3368 (User cancelled or user settings disallow operation) error code when the box is unchecked.

Symptom:
An end-user cannot play Adobe Access protected content. The client application returns a persistent 3321 (Individualization Error) or 3322 (Device Binding Failure) error code.
Root Cause in Chrome Browser:
Adobe Access DRM must create a unique machine identifier (I.e. "token") to identify the the device. This token is provided to the Adobe Access license server during a license request to view DRM protected content. If Chrome Browser disables the ability for Adobe Access DRM to create a unique machine identifier, playback of Protected Content will fail with a 3321 or 3322 error code. By default, this setting is enabled and available to toggle in Chrome Browser version 30 and higher. Unchecking this option will prevent Adobe Access DRM from properly functioning. A 3321 or 3322 error that persists after a call to resetDRMVouchers is an indicator that this setting may need to be changed.
Resolution:
In your Chrome settings:
•             Click on "Show advanced settings…"
•             In the subsequent "Privacy" section, click on "Content settings…"
•             In the subsequent "Protected Content" section, make sure that the following box is checked "Allow identifiers for protected content (computer restart may be required)".
We are working with Google to allow better detection of this condition, so that the client will return a 3368 (User cancelled or user settings disallow operation) error code when the box is unchecked.

Why I cannot modify the access permissions?

On the Fedora8 OS I issue the follow command:
[root@localhost local]#chmod o-r /usr/local
[root@localhost ~]#chmod o+w /root/rar
Then I check the privilege using GUI tool and I find the access permissions have not been changed.
Why I cannot modify the access permissions as a root user?

1) Is the underlying file system mounted as read-only? Not even root can overcome that.
2) Perhaps the file has been marked as "immutable" by chattr(1)? What does
# lsattr -d /usr/local/ /root/rar
show? Without attributes, should see only dashes ("-").

I recently downloaded Adobe Bridge CC and Flash Professional CC on the Creative Cloud and I cannot find or access them on the computer - where did they go?

I have the creative cloud that I use for my schooling and I downloaded both Adobe Bridge CC and Flash Professional CC on the Creative Cloud and I cannot find or access them on the computer - where did they go?

Hello,
I only can answer what concerns WIN. By using a file manager I can see, that all my Adobe programs are stored there:
Program Files (x86)\Adobe\Adobe Bridge CC aso.
Hans-Günter

Unable to access following end point(s)

Hi All,
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.

Hi karan,
Thank you very much for your reply to my question.I will also try to change the message size by informing my client SOA admin people according to you.
Regarding the scenario that you are asking , I already mentioned clearly above(When I first posted this question).Anyways I am again copying those details below:
Starting of Scenario explanation:
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.
ending of Scenario explanation:

Problem setting project end point (can't access the end point marker)

I can't seem to set my project end point because the slider control that adjusts the spacing of the measures is obstructing my pointer from being able to click on the end point marker. Any hints as to how I can move the coation of this slider control so that I can access the end point marker with my pointer?

6ftmama wrote:
FYI - the end point marker now turns into a bracket when you hover over it.
THe End-of-Project Marker doesn't change at all. What you see is a change of the Mouse Pointer.
This is called a "Click Zone" where the Mouse Pointer changes to different shapes when moving over or click on an object or an area in the window.
Here the Mouse Pointer changes to "Trim Tool" or "Resize Tool".
Pointer Tool:
Resize Tool:
It is the same Tool wne you move the Mouse Pointer of the right edge of a Region to resize its length.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Hi, i have lost my iPhone's iCloud password and i cannot get an access to it now because i have activated " Find my Phone " , and i couldn't remember neither the emil or password, please help me if there is anyway to bypass this process please!!

Hi, i have lost my iPhone's iCloud password and i cannot get an access to it now because i have activated " Find my Phone " , and i couldn't remember neither the emil or password, please help me if there is anyway to bypass this process please!!

Start here: https://iforgot.apple.com/password/verify/appleid

Powerbook g4 cannot access linksys access point

Similar Messages

Maybe you are looking for