Powerbook g4 - does not start up...it shows kernel panic screen...how do i fix/resolve this problem?

powerbook g4 - does not start up...it shows kernel panic screen...how do i fix/resolve this problem?

In the overwhelming majority of cases, kernel panic indicates a severe hardware problem. Braby and Allan pointed to useful things. If you can boot from CD / DVD and reinstall without any kernel panic, then may be a software problem, but this is less probable. You must check, anyway.
If you have a 2nd mac around and a firewire cable, you may try to restart the ill mac in target mode and connect it to a healthy mac to see whether it may be used in target mode.

Similar Messages

  • TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing.  How do i fix this?  Thank you in advance.

    When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing.  How do i fix this?  Thank you in advance.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • HT1476 iphone 5 usb does not charge in my 2013 Honda Accord.  Is there a fix for this issue?

    iphone 5 usb does not charge in my 2013 Honda Accord.  Is there a fix for this issue?  It will connect via bluetooth but when I go to connect the usb charger it states that it is not compatible or you never get the charging display on your iPhone 5.  It charges just fine when I use the AC charger in the house.  At first I thought it may have been the cord but the same cord works fine in the house too.  This causes problems when you take long trips and don't have any way to charge your phone while on the road.  Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?

    Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?
    Are there any upcoming fixes/updates to the software of your Honda Accord that will fix this?  Everything works fine except when the car is put into the equation?

  • When I accept meetings in outlook 2010 on my Iphone it does not send my acceptance to the requestee.  How do i fix this

    When I accept meetings in outlook 2010 on my Iphone it does not send my acceptance to the requestee.  How do i fix this

    Outlook 2010 is an email client that runs on a PC. It does not run on an iPhone at all.
    Is this a corporate email account? What did your IT department say when  you went to them about the problem?
    The ability to correctly process meeting requests when using an Exchange server depends on the version of Exchange your organization is running. It has nothing to do with what mail client you use on your PC.

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • HT201401 I have set the ringer for my phone, and it is on according to settings, but does not ring when a call is received.  How can I fix this?

    My phone does not ring when a call is incoming.  How can I fix this?

    You might try restarting your device, your router and your Apple TV.

  • I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

    I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
    Pls inform me how can i resolve the problem of wifi.

    You have to go to autherized iPhone agent.

  • TS3694 hello out there ! am trying to restore my ios, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down f

    hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we

    mazunzo tembo wrote:
    "the iphone could not be restored, an unknown error occured(1015).
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • My computer does not start . It shows an envelope with a question mark.  Can anyone tell me what to do?

    My computer does not start  I turn it on and it shows an envelope with a question mark.
    Can anyone tell me how to fix it.

    Troubleshooting: My computer won't turn on
    Mac doesn't boot

  • Please help!  Safari does not start due to a plugin failure. How can I remove librooksbas.dylib. Without being able to open safari. Finder does not find the file.

    Please help.
    iSafari does not start up due to an error caused by plug in librooksbas.dylib.
    How can I remove this plugin without opening safari. Finder does not find the file, nor any other plugin.
    Eric

    For future reference, Safari Plugins are kept in Macintosh HD> Library> Internet Plugins.
    To unhide the Library folder, open up Terminal (just type"Terminal" into spotlight) and type:
    chflags nohidden ~/Library

  • HT1925 I cannot remove or reinstall Quicktime for Windows XP.  It keeps looking for Quicktime.msi file.  The file is in the folder but it does not think it is the right file.  How can I fix this?

    Quicktime keeps wanting to upgrade, but it will not finish becasue it cannot find the file quicktime.msi.  The file is in the folder where it thinks it is.  I have tried to uninstall and reinstall, but because it cannot find the file it stops.  I have tried to run Quicktime but it says it is not there.  How can I remove it so I can install it again.

    It appears it is fixed.  FYI.  I went to Major Geeks and it said:
    Project has been abandoned. You can now use Microsoft FixIt for this problem.
    Read more at http://majorgeeks.com/download.php?det=4459#csPejWlRIRpo3bpv.99
    Thank You for your help

  • If battery is in palce Powerbook G4 does not start

    Hello,
    I just had to change to AC adapter/recharger
    Now my Powerbook G4 1.67 dual lawyer
    will not start if a battery is in its compartment
    tha fan goes wild for a minute of so then it shuts down
    However, if no battery in the compartment, and plugged in with the CA Adapter/recharger
    it works just fine
    I have tried 3 batteries, and all give the same problem
    I ran Hardware test, and all is fine
    I reset the PRAM (while no battery in compartment) and I reset the PMU
    Still no results, same problem
    any ideas ?

    The Apple hardware test doesn't test the charging circuit, so you need to debug it based on what's happening with the system. When it tries to start, with the battery in, the fans go crazy, and it shuts down sounds like a logic board issue. The fact that you tried 3 batteries with the same results doesn't leave alot of things to look at. There are 4 components, maybe 4.5 components to the charging circuit: power adapter, DC-in card, battery and logic card. Some suggest the PRAM battery should also be considered. So, adapter is new and runs the system without battery. That means DC-in card is working. 3 batteries don't work. All sort of points to logic board.
    If the system is working on power, and you put it to sleep, with the white LED pulsating ... if you disconnect the power does the light continue to pulsate? If not, replace the PRAM battery (www.macsales.com has new PRAM batteries for some models). Then re-evaluate if it will run with battery. If not, then run only on power, or replace logic board.

  • MacBook Pro can turn on and off, but does not start up. Stays on white screen with flashing folder icon, does not go to desktop.

    MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.

    Hello Sonya_Rose,
    I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
    Check the mouse and keyboard
    This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
    If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
    Additional steps
    If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
    Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
    If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
    MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
    Restart the computer, then hold the C key during startup.
    From the Utilities menu, choose Disk Utility. Don't click Continue.
    Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
    After repairing the disk, try to start up normally.
    Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
    If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
    If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
    If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
    Regards,
    Sterling

Maybe you are looking for

  • Can I have multiple ipods and ipod accountson a single computer?

    Copied from the wrong area of the forum and pasted here.  Hopefully I will get a better response if my questions are posted in the correct section.  My daughter just got an ipod touch for her birthday so we created aseperate itunes account for her. 

  • Renaming the title of a frame from a panel

    Hi, I've searched the forum but I could not find anything that help me... I want to change the title of Main(a class that extends JFrame) from MainPanel(a class that extends JPanel) somewhere in my MainPanel I use: ((Main)getParent()).setTitle("A new

  • Error when parsing SOAP message from JSP

    i write a class to call SOAP message from a servlet on jdev 1013 when i run the class alone it works fine soapMessage = this.buildSOAPMessagee(); ByteArrayOutputStream output = new ByteArrayOutputStream(); soapMessage.writeTo(output); SOAPConnectionF

  • Loadvars not working on external domain

    Hi, I have Domain1 that is hosting my flash .swf file, and Domain2 that is linking to that .swf file. In the flash file I have a; loadVars.send("another-domain.com", "_self", "POST"); command. When the flash file is placed anywhere on a page on Domai

  • Change color on mouse over

    Hi, how can i change the color of column heading during mouse over a particular column.? Does anyone know any html code for this?