PowerBook G4 external USB drive problem

I've got a 12" Powerbook G4.
All of the following operations were performed with the laptop plugged into the power adapter.
Today I connected a Bytecc external USB drive model 7050 containing a Maxtor 6 L060J3 60 GB and started backing up my main drive and moving some movie projects to it.
I initialized the drive using the Disk Utility.
I used Finder to copy almost 55 GB of data to the initialized drive.
I attemped to use the 'eject' icon in finder to disconnect the drive so that I could remove power and move some things around my desk. The drive did not 'eject'.
I disconnected the USB cable from the G4 and got the warning message from OSX.
I powered down the drive and moved things around then attempted to reconnect the USB drive.
I repeatedly got a "Volume not found" error with the correct name of the drive. The drive still appeard in the finder pane.
I attempted to verify and repair the disk using the Disk Utility, which still recognized the disk, but was still getting the "Volume not found" error when I attemtped to access the drive using Finder.
I used the disk utility to verify and repair the G4 system disk, at which time the USB drive dissapeared from the Finder window.
Now, attempts to reconnect the drive, do not show the drive as present in the Finder window, yet:
- when I disconnect the drive, I get a warning about stopping a device
- the drive still appears in the list of drives in the disk utlity app.
Any ideas on how I can get this drive to work again? I spent a lot of time dumping video into iMovie from my digital camcorder and I'd like to avoid reformatting the drive.
P.S. What is the correct way to shutdown and remove an external drive?
Thanks,
Larry Ice
12" Powerbook G4 Mac OS X (10.4.6)

The proper way to shut down and remove the drive is to unmount it (drag it to the trash) and then power down the drive before you unplug the usb cable. If the eject icon didn't work you should have tried dragging to the trash. If that didn't work go to Disk Utility and unmount from there. if that didn't work try Repairing the drive from Disk Utility. I would not have pulled the usb cable as you did.

Similar Messages

Problems with a shared external USB drive

I have setup an external USB drive on my iMac 10.6 and use it for Time Machine backup. When I try to access this drive over my wireless network from my PowerBook 10.5.8 for TM backup, I can only see the drive under Shared as a Folder, not a drive icon. It is not available for the PB's TM app. This is a HP 1 TB drive formatted in 1 partition MacOS Extended journaled GUID .... and it works as a backup drive for the desktop 10.6 TM.
The very same thing happens if I connect this USB drive to my Airport Extreme only both the PB and the iMac see the drive as a folder and neither can use the drive for a TM backup.
So, how can I see the drive as a drive icon from the PB and have it available for TM backup over the network?

Douglas McKibbin wrote:
The very same thing happens if I connect this USB drive to my Airport Extreme
Do not attempt to back up that way -- it's "iffy" and +*not supported by Apple.+*
It sounds like you've missed a step in the setup. See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
Be sure to note the advice there to partition the drive, so each Mac has it's own, exclusive space.

[SOLVED] Problem with external USB drive started yesterday

My system freezes for about 65 seconds at the login screen. After 65 seconds, I can login and everything is normal afterwards.
I discovered that I can eliminate the freeze by disconnecting the external USB drive from the PC. Here are the error messages from kernel.log when the drive is connected:
Oct 15 23:10:14 localhost kernel: [ 17.035091] usb 1-1.3: device descriptor read/64, error -110
Oct 15 23:10:29 localhost kernel: [ 32.155955] usb 1-1.3: device descriptor read/64, error -110
Oct 15 23:10:29 localhost kernel: [ 32.325394] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Oct 15 23:10:31 localhost kernel: [ 34.045126] MediaState is connected
There is supposed to be a kernel boot option (irqpoll) to prevent this from occurring. However, that option seems to no longer work for kernels after 2.6.39. If I try using it with Arch, the system will not boot, saying all the CPU's failed.
I also don't understand why this just started happening yesterday, as the USB drive has been connected to the PC longer than I've been using Arch. Also, my kernel has not been updated since I installed Arch on Oct 8.
Does anyone know another fix or workaround for this problem?
Thanks,
Tim
Last edited by ratcheer (2011-10-17 01:30:08)

Problem solved
I feel stupid, but I also feel better. I turned off the PC, disconnected the power from the USB drive for about 15 seconds, reconnected the power, rebooted, removed the irqpoll kernel option, and Ubuntu started, perfectly. I need to learn that the USB drive just goes freaky sometimes and remember to do this. But, this is only the second time I've had to do this in months of use.
Tim

My external USB drive is not recognized by Win XP

Hi!
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Thanks for any help!
/ Anders

Hi Anders and welcome to Discussions,
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Yes it will !!
Although with the BootCamp 3.0 Drivers (from the OSX Snow Leopard DVD) and the 3.1 Driver update (downloadable) Apple has introduced read-access to HFS+ partitions from Windows this feature seems to have some serious problems for some people.
Personally I see this feature as "experimental" at the moment.
XP itself knows nothing and therefor can not use/see HFS+ partitions and GPT (GUID partition table) harddisks.
You might wanna have a look (or buy) at MacDrive http://www.mediafour.com/products/macdrive/ which right now is the better solution.
Thanks for any help!
/ Anders
Hope it helps
Stefan

Mini doesn't always connect bluetooth and external (USB) drives on boot

I have had a new Intel mini for 4 months now (we also have a PPC G5, which we love). In the last few weeks the mini started to not connect my Bluetooth keyboard and mouse, nor recognize some of my USB peripherals when booting up. When this happens, it also makes a repeated "startup sound - bong!" echo when the start button is pressed. I have two external USB drives, one 500GB Phantom and one 500GB WD MyBook. When the Apple logo appears at boot, I can see the activity lights flashing on the drives as the BIOS interrogates the USB connections, but after the Leopard start up desktop appears, the only drive shown is Macintosh HD, the mouse pointer is at the top left of the display and will not move, nor will the keyboard do anything. I have read every post on this subject and tried all of the resets suggested. Sometimes this works after a few attempts, sometimes it takes 6 or more tries - disconnecting all cables, and turning the computer on again and again. Occasionally the WD MyBook drive appears on the desktop, yet still the Bluetooth is unresponsive and the other drive absent. I am getting frustrated having to disconnect everything and trying to boot this thing up, sometimes for one hour or longer before I can use it properly (all of my work is on the external drives).
There MUST be a firmware update for this by now, because I see that I am not the only one experiencing these problems, and this is obviously some problem with how the BIOS is communicating with the bus.

Hi amyta pdx-
I'd be careful jumping to conclusions or the troubleshooting process may get clouded. For one thing those WD drives are junk and most people using them eventually have problems.
What happens with everything disconnected from the Mac except a mouse connected to a USB port on the Mac and the monitor connected to the video port only?
Luck-
-DP

Trouble accessing files on external USB drive after 10.6.8 update

Upgraded to Mac 10.6.8 on my MacBook Pro (I'm not a techie, but the "About This Mac" thingy says 2.53 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3 - I assume that means something to somebody). Since the upgrade, I've been having problems accessing data on an external HD connected via USB - there were no issues before the upgrade, but now it's impossible to even navigate to a particular file or subfolder half the time, as the process freezes 95% of the time (every so often I am able to get through, for no obvious reason) - usually I just get what looks like an empty folder and a little spinning thing in the bottom right-hand corner. Sometimes when I do get to a file - say it's a ZIP file - I'll try to unZIP it and the process will hang; if I try to drag it to the desktop and unZIP it there, I can't get it to copy to the desktop, I just get the "copying files" box and a bar that never shows any progress, it just hangs at zero bytes out of whatever it might be.
Also having intermittent issues with another external USB drive, which is the one I use for Time Machine - about one in every five backup attempts is successful, the rest of the time I get a message saying the backup couldn't be performed.
I have two external FireWire drives as well, and I'm having no trouble with either of those - so I'm assuming the problem is USB-related (and 10.6.8 related, since none of this was happening before the upgrade).
So - I'm wondering if anybody else is having the same issues, and f there's a solution that a non-techie like me could handle that won't make blood come out of my ears.
Cheers!

Thanks baltwo - the PRAM tip was helpful. For some reason I still have trouble accessing a few files, I'm putting that down to them being somehow corrupted. Eric, thanks, but I tried using Disk Utility and the communication problems I was having with the drive meant that the repair couldn't be performed. I may try again now that that side of things seems to be running a little more smoothly. Anyway, thank you both!

Time Capsule external USB drive won't reconnect remotely over Back To My Mac

I'm running a Mac Mini at work, connected via ethernet to an enterprise network (I have no idea what routers they are using, or how they are set up).
At home, I have a MBP laptop and a Time Capsule (hardwired to cable modem) with an external USB drive attached.
All 3 machines (Mac Mini, MBP, TC via Airport Utility) have Back To My Mac switched on.
I can access the external USB drive on my home TC from my work Mac Mini....until the Mini falls asleep. When I wake it back up, the connection back to the TC fails. However....after restarting the Mini, the connection works again.
My first thought was that the corporate network / firewall / etc was causing the problem - not leaving correct ports open, or someting to that effect. However, I realised that if that were the case, restarting the Mini shouldn't help, but it does.
Does anyone have any idea how sleeping breaks being able to access a TC's external drive remotely over BTMM?
The Mac Mini is a 2.3GHz Core i5 with 8GB RAM and plenty of HD space.
The MBP is a 15" late 2013 retina, 2.6 GHz Core i7, 16 GB RAM, also plenty of HD space.
The TC is a 2 TB 4th generation model.
Thanks!
J

Sorry that did not work. This works well for me using Lacie drives, but I haven't tried Iomega.
Have you checked Iomega's site to see if any software/firmware updates available?
Also noticed during a quick search that a number of users are reporting mounting problems with Iomega. Not sure if this applies to you or not.
http://discussions.apple.com/search.jspa?search=Go&q=iomegadrive+won%27tmount

Single-user mode: How to mount and access an external USB drive?

My MacBook Pro HD is acting up. Cannot boot normally or into "safe mode". Cannot reinstall OS without wiping out the HD. Need to recover some critical files but DiskUtil First Aid and Restore options cannot successfully complete. Problem traced down to "invalid node structure" which means I either have a hardware problem or my filesystem partition directory structure is corrupted. I need to recover some files that are not backed up (timin issue with my regular backup process).
I can boot into single-user mode, mount the root file system (/sbin/mount -uw /) and can see/navigate the rot filesystem structure via good UNIX command line. Here's what I would like to do (in single-user mode):
1. Mount an external USB drive (250 GB already formatted as Mac OS X Extended)
2. Copy various files and/or directories from my HD to the external USB drive (UNIX cp command)
I realize I could go spend $$ for the Disk Warrior or Data Rescue products (or something similar) that SHOULD help me recover my HD or files, but it seems silly to do this when I can see, touch and taste them from within single-user mode....
Comments? Suggestions?
TIA --
Trent
P.S. Once I've recovered my files, I'll try to reformat the HD and then reinstall the OS. And THEN go have Apple look at my machine (thank goodness for AppleCare coverage)!

Resolution:
1) Boot system in single-user mode (SUM) with external HD attached.
2) Execute the following UNIX CLI commands once SUM boot process is completed:
# fsck -fy
# mount -uw /
# mkdir /Volumes/target_directory
# mount -t hfs -w /dev/diskXXX /Volumes/target_directory
# cp -RXv /source_directory /Volumes/target_directory
Where XXX is the device-level name for your external HD's data partition. In my case this was /dev/disk1s2. It may take some experimentation to identify this device name if your system has multiple HD's.
3) Verify contents were successfully copied onto the /Volumes/target_directory.
Comments and observations:
- Do NOT use "/" as your source directory - cp will make a second (redundant) copy of /volumes/target_directory
- I was able to successfully copy ALL files off my HD despite the fsck command's "invalid node structure" error message with this simple procedure. YMMV, depending on the state of your HD.
- The repeated disk0s2: I/O error warnings displayed during the SUM boot process did not seem to have a negative effect on this procedure. I also received this same error warning intermittently as I navigated the mounted filesystem did not seem to be a problem, either. Again, YMMV.
Commercial software:
I downloaded ProSoft Engineering's Data Rescue 3 product (trial version) before spending $99 to attempt to recover my "bad" HD's data via mounting to a good system with FW target mode. It could not successfully complete its "QuickScan" process and immediately hung on block 0 of 390M during its "Deep Scan" process. The product did seem to function properly on an operational system. ProSoft's technical support was responsive and helpful but had no answer for my "Deep Scan" error.
I did not attempt to use Alsoft's Disk Warrior 4 product. I could not find any trial software available and was reluctant to spend $100 based upon the mixed reviews and comments on this discussion forum as well as other reviews. Alsoft does claim to address the "invalid node structure" error in their marketing materials. Hindsight being 20/20 - I saved $100 by using this simple procedure.
Final note:
Neither Leopard nor Snow Leopard's installation DVD could recognize the bad internal HD when trying to do a reinstall. While DiskUtil was able to "see" the bad internal drive it immediately failed when I tried to do an "erase and format". Took the system to my local Apple store and the Genius ran a tool called "SMART Utility" from Volitans Software (www.volitans-software.com). SMART utility confirmed that my HD was bad so it was replaced. AppleCare pays for itself (once again!).

No application runs after booting from an external (USB) drive

Hi all,
my best hope is that I just embarrass myself with a blatantly obvious question instead of finding a real issue that will be resolved only in later updates. Here it is:
As I want to upgrade my hard drive in my good ol' MacBook, I wanted to backup my present boot HDD to an external USB drive (freshly formatted, HFS+ journaled, GUID partition table). I tried both SuperDuper! and Carbon Copy Cloner. In both cases, the backup/cloning process goes fine, and I can reboot into the external drive, and the OS starts (yes, with wifi working, even iStat menus, textExpander etc. initiating fine). But all applications (not those on the menu bar, though) crash and notify me of some thread having tried some invalid operation, or sometimes I even got some vague reference to kernel protection.
Do you have any ideas what this is? Something new and (supposedly) secure in 10.5.6? I tried a fairly standard procedure, I think. (Also, it is a fairly pressing issue as I would not really want to waste much more time on this drive swap. And I would rather use disk-cloning than the install disk and sucking back data from an apparently unreliable backup.)
Many thanks for any thoughts!
(Just to inform the interested, I ran a fairly extensive cleaning-maintenance-rebuild cycle by the latest Onyx before starting all this, this should clean up the state of the OS pretty much. But I could not run DiskWarrior. Convince me if you think that this would solve the problem.)

Thanks Devin, I think my issue is a bit different.
I am 'long' past the 10.5.6 update (as long as possible), it did not crash, and Software Update checked what it wanted several times since then (as it is set to do so daily).
Thanks for the safe boot tip, I have not tried it yet, though I am skeptical why would this help applications starting up without breaking some kernel protection -- but only if I booted up from an external drive.
I repaired all I could before the cloning of the drive, only the deep maintenance of DiskWarrior was skipped. With the disk or the OS itself, I basically did what you can, even the stuff that you are rarely supposed to do. (Onyx is a great tool to do all these and more, freely.)
I am not sure either that a FireWire drive would have helped, but who knows. (But really, the OS would boot, just the applications would feel that their are on an 'inferior' drive?) In any case, FireWire drives are not that easy to come by, and a risky investment -- e.g. I could not use them with the new MacBooks. Oh, and all my work was done on a firm table, but again, the behavior would be hard to explain as the HDD misbehaving, as the OS had no glitch, just I could not start applications without their crashing immediately.
Thanks again, I hope I run into something useful or if it is a bug then Apple magically pushes out some update before their winter break, or I will sadly watch my precious new drive sitting on a table idly.

BOOT FROM AN EXTERNAL USB DRIVE???

I know apple has made it clear about booting from an external USB drive
http://docs.info.apple.com/article.html?artnum=106474
but I know that there are people who are able to boot from an external drive, does anybody know how to do this?
It's just that id like to work on final cut studio on an external drive for various reasons:
1st: my powerbook's HD is small and slow (60gb)
2nd: my external usb drive is big (160 gb) and fast (7200 RMPS!)
so a little help would be apreciated
best regards

"Actually, USB II is faster than FW 400."
In theory, probably. In real life Firewire 400 is much faster than USB2, not to speak of Firewire 800:
"Wee Wiebetech" Portable FireWire/USB2 Drive Challenges The Fastest Competitors.

I have a first generation apple tv synced to a itunes library on an external USB drive. Movies and Music Won't Play

Here's my setup. First Generation Apple TV. G4 Powermac running OS X 10.5.8 iTunes 10 with the Library stored on an External 3 Terabyte USB 2 drive. It's plugged into a PCI USB 2 card. Everything worked fine till I transferred my iTunes library to the external USB drive. Things seem to sync up fine. I have it set to copy TV shows to the Apple TV's internal drive and that seems to work but when I try to play music or movies that are streaming from the library, I get an error. With movies I get the "The selected video cannot be played. The format was not recognized." error. The movie and music list seems up to date but now it won't play. Did I waste my money on this external drive? How do I get this setup to work?

I don't think this will be a complete answer to your question, but may point you in the right direction.
I have a similar setup (same OS X and iTunes versions), but my library is on a network attached 2TB harddrive (vs a USB 2 drive). Mine works fine, both syncing (which you don't have a problem with) and streaming. It's possible that iTunes doesn't like the USB 2 drive, but I don't know. Are you able to watch TV shows on your PowerMac after having moved the files to the USB drive? If you can watch content on your laptop but not on your AppleTV, it suggests the Apple TV doesn't like the USB drive.
Perhaps you didn't transfer iTunes library content correctly. (Forgive me if I'm telling you things you already know.) The iTunes library consists of a list of content and it's location (local harddrive, network drive, etc.). If you simply moved the files, but didn't actually update the library with the new locations, this can explain why you can't stream the content. The Apple TV displays what is in the library, but cannot play it if the library entry is pointing to the wrong location. Note: This "library update" I'm referring to is not the same as simply changing the iTunes media folder location in iTunes > Preferences > Advanced.
When I moved my content to an external drive, I had to delete everything in my iTunes Library, then re-import everything (File > Add to library). Don't let the phrase "delete everything in my iTunes library" freak you out. Deleting entries in the library is not the same as deleting the files (which you definitely do NOT want to do).
If you select an item in your iTunes library and press the Delete button, it asks for confirmation thus:
Are you sure you want to delete the selected TV show from your iTunes library?
It's OK to answer "Delete TV Show". It will then ask you if you want to delete the file. Do NOT delete the file. You can select your entire library and delete everything at once, just make sure you do NOT delete the files when it asks. When that is done, make sure the iTunes Media Folder Location is set to where you want and that the files are there. Then, go to File, Add to Library and re-import everything. It will take several minutes to more than an hour, depending on the speed of your computer and the size of your library.
I have had to do this everytime I've moved my library to different storage devices. If there is a simpler way, I am not aware of it.
I hope this helps.

External USB drive won't mount after 10.9.5 upgrade

Is anyone else reporting the following issue? Immediately after installing OS X update 10.9.5 (13F34) on 09/18, my external USB drive (IOMega 1GB OS X Extended FS) used for Time Machine would no longer mount and isn't recognized. When I look at the drives in finder, it is missing. However, it does show up under the USB Hi-Speed Bus device tree:
USB Mass Storage:
Product ID:    0x0376
Vendor ID:    0x059b (Iomega Corporation)
Version:     0.00
Serial Number:    ABCDEF012314E2ED
Speed:    Up to 480 Mb/sec
Manufacturer:    Iomega
Location ID:    0x1a120000 / 3
Current Available (mA):    500
Current Required (mA):    0
Console message when device plugged in:
10/6/14 3:22:31.000 AM kernel[0]: USBMSC Identifier (non-unique): ABCDEF012314E2ED 0x59b 0x376 0x0, 2
mount command results:
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1s2 on /Volumes/Mac-Mini 2 (hfs, local, nodev, nosuid, noowners)
System is Mac-Mini (late 2012), 2.5 Ghz i5, 8GB ram, 500GB local storage, 1TB on second Firewire disk for media, 1TB USB disk for Firewire (PROBLEM)
I have reinstalled the combined 10.9.5 OS upgrade, and verified that the drive works when connected to my other MB Pro (mid-2012 running Yosemite beta 3). There is no third party software that I'm aware of in use for this drive, as it's only for Time Machine backups.
Thanks

Is the drive's icon on the desktop (perhaps behind another icon, which is possible if Finder > View > Cleanup is enabled)?
If not, is the box Finder > Preferences > General > External Disks checked?
Is the drive listed in every Finder window's sidebar?
If not, is the box Finder > Preferences > Sidebar > External Disks checked?
Are Time Machine backups to the drive happening on schedule?
If not, does the drive appear in System Preferences > Time Machine > Select Disk?
Can you open /Volumes/Mac-Mini 2/Backups.backupdb using Finder > Go > Go to Folder...?
Does the drive appear in Disk Utility? Is it (or can it be) mounted there?
Have you tried to plug it in to a USB port on the Mini (not a hub) or into a different USB port on the Mini?
Have you tried this: shut down; unplug the drive; boot the Mac; after you have logged in and the Finder is done populating the desktop and menu bar, plug the drive in?

EXTERNAL USB Drive will not open with Snow Leopard

External USB drive will open with SL. The drive icon appears on the desktop. When I click on it, Error message, "The alias USB Drive can't be opened because the original item can't be found." When I click on "Fix Alias", a window pops up and shows the usb drive in a list but does not respond when I click on it. I then tried disk utility and tested the disk and it tested OK. The drive still will not open. This problem started after I installed Snow Leopard. Need Help.
Message was edited by: PHAT ROB

The same error is produced when I try to mount a smb share.
I select the "connect to server" (cmd-K). Input the share info "smb://<user>@<server>/<share_path>
At the auth prompt, I input my credentials.
The error pops up, same as original poster.

FSCK and reboot issues with external USB drive

I'm having an issue with an external USB hard drive I'm using. I've always had issues with this drive cause my reboot to "freeze" when it's mounted. Basically the system message with be sent out, but it doesn't actually proceed with the reboot. No switch to init 6 or anything, but the shutdown process is still active. I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand. So I just got around this by unmounting the drive before I shutdown. However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser.
Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing. I tried running fsck on the drive, but didn't get much farther. I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't. Even with a kill -9.
I'm really confused as to what is going on. Has anyone else had this problem? Anyone have any ideas what could be causing all this or what I can do to stop this? Thanks in advance!
David
[email protected]

Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

External USB Drive Not Shown in Finder... HELP!!!

After upgraded to the latest OS X Lion, external USB drives plugged to my macbook pro (named A) won't show anything. I've tried cmd+opt+r+p twice but no luck; however, i am able to see it in Disk Ultilities and Storage in About This Mac...
Another same macbook pro of mine (named B) did the upgrade and it is working just fine - external drive is shown as normal whenever plugged.
Help please because my daily work depends largely on document on external usb drive!!!???

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

PowerBook G4 external USB drive problem

Similar Messages

Maybe you are looking for