Powerbook g4 (FW800) Optical drive ejects all media

I think this question has been there many times, but could not found a decent answer.
Problem is that my optical drive (superdrive) does not mount any media, when I put disc (any disc) in it reads it for a while and spits it out... What to do?
Is my optical drive an ex drive, broken, dead? Or is there some setting corrupt or what`
thanks

I have had to replace 2 Super Drives and no it was not at all related to any software upgrades. I am quite frankly ticked that I have such an expensive laptop, and have had to replace 2 drives in 18 months. First one was under warranty second of course not. I replaced it with a non OEM, rather with a PIONEER DVD-RW DVR-K05. I would rather try my luck with something new, as opposed to the the same drive that has broken twice.
First time was the same as yours, second was an electrical issue which was causing the drive to continually eject. I checked with the repair person, to determine if I was causing the problems. I have no bends in the drive and there were no outward appearances of damage. I travel everyday with my laptop, it is a work/personal laptop. I use a rolling laptop bag, and recently travelled internationally with it and thought perhaps the jostling and vibration. But the first drive went out prior to me using it as a work laptop, did not travel much with it then. But with new job, I am everywhere rolling the laptop in a roll bag (so much easier to travel with)!
Michelle

Similar Messages

  • HT1567 When running diagnostics, iTunes doesn't detect an optical drive at all.  What do I do next?

    When running diagnostics, iTunes doesn't detect an optical drive at all.  What do I do next?

    I think, no... I know you failed to provide complete details of everything that had been attempted.
    Then you responded with a smart donkey comment.
    Best of luck finding a resolution.

  • Optical drive ejects Windows 7 install disk

    I am running Snow leopard 10.6 on a late 2008 MacBook Pro. I have been trying to install windows 7 64bit through bootcamp, but when I get to the part where it asks for the disk, the optical drive ejects the disk! Anyone with a solution?

    Hi everyone, thanks for your input. I thought I'd run a laser cleaner through the drive first and see if it would make a difference as I never use the drive I thought it might be dusty. It seemed to work as BC was able to read the disk and kick off the install, however as soon as the install started, a black screen came up saying "Select CD-Rom Boot Type" which I wasn't expecting and had no idea what to do (I'm no techy!) so I quit the install and held down option on restart to boot the MAC OS>
    This is a windows 7 legitimate install disk purchased yesterday from a PC build company. 64 bit. My Macbook pro 2008 model has an Intel core 2 processor (64 bit) so I'm pretty certain I am using the right windows version.
    So I think this is over my head and I may take it to a store for install and hope for the best!
    Thanks for your feedback

  • Optical drives ejects any and all forms of discs!

    Just as the title says, on my Macbook Pro which i bought somewhere around july of '06, my optical drive will no longer read any form of disk. DVD, CD, CD-R, DVD-R...nothing. All it does is let it spin for about 30-45 seconds and spits it back out. Is there anything you guys can recommend or should I just give Apple a ring? I have the Applecare Extended warranty so either way it doesnt really matter.
    Any input is welcome. Thanks a lot.

    I had the same trouble with my MBPI got in Sept. 06. I had to take to Apple and they put new drive in. I have A'Care on it.
    Nothing you can do, so get them to give you a new one.

  • Mac mini optical drive ejecting discs

    Hello, All
    I'm using a Mac mini late 2006 model (1.83GHz Intel Core Duo, 1GB RAM, Snow Leopard 10.6.1) and a few days ago the machine started ejecting optical discs without reading/mounting them. Once a disc is inserted, the machine whirs a but and then ejects the disc.
    The problem affects all discs - blank CD, DVD, published CD and DVD.
    Can anyone offer any help as to why? I've not had any problems with the optical drive before and have used it reasonably regularly because prior to upgrading to Snow Leopard and plugging in an external hard drive to use Time Machine, I was using Back Up - which obviously requires me to use the optical drive.
    I must say I'm a bit confused as to why. The machine has not been dropped or even moved since the drive has gone from functioning to not working. I keep my software up to date. I have heard that Snow Leopard seems to be causing the odd strange issue but not come across this one. The drive has functioned properly since the SL install a month or so ago.
    Any help or advice is really welcome.
    One last thing (sorry!), and this is probably completely unrelated but I thought I'd mention it so that all info is out there. A couple of weeks ago (also post-SL install) my wireless Mighty Mouse stopped functioning properly. It wasn't the batteries or dirt, etc. I could move the pointer around the screen but just not click on anything. I thought at first that the Finder had crashed but upon using a replacement mouse, it became apparent what the problem was. I tried re-booting, switching the mouse off and on, the usual stuff. Few days later, I tried the Mighty Mouse again and it worked fine.
    Thanks in advance, all.
    Matt

    Hi there
    Apologies for the delay in coming back here, been kind of busy.
    I tried the canned air solution and unfortunately, it didn't work. However, having spoken to a number of people about this since my posting and the help posted to this forum, using the canned air generally comes highly recommended because it usually does solve such problems.
    So, I've also looked for a cleaning disc and am still searching (to be fair, I've not yet looked very hard) but the problem seems to be that most stores sell cleaning discs designed for drives with a CD tray, rather than the slot loading mini approach (which also has fabric to held clean the disc on its way in, rather negating the benefit of using any fluid or gel on the disc).
    I'm going to keep looking and will post back here to let you know if I have any luck or not. Do try the canned air solution - it may work, also please post to let us know if you solve it or not. I fear that there's a proper problem with the drive...
    Good luck and thanks, All. Will post again.
    Regards,
    Matt

  • Optical Drive ejects Blank Discs

    I have an internal optical drive Pioneer model DVD-RW DVR-104. Whenever I insert a blank DVD-RW disc it ejects it. If I am trying to copy a DVD in the Toast application, the blank disc keeps being ejected with a Toast message that says "Insert a recordable disc". If I insert a recorded DVD it plays fine and the Toast application copies it but I can't get it written on a blank DVD because the blank disc keeps being ejected. How do I fix this problem?

    Yes, absolutely. From doing a search on the net, this seems to be a very common issue.
    When I had the latest version of Leopard, all ran smoothly. Burning was fine. Ever since the installation of Snow Leopard, my superdrive ejects all blank CD's.
    Behaviour is as follows:
    - Any blank CD spins 3 times, then gets rejected. It will not mount or be 'recognised'
    - This happens with any brand
    - This happens after a reboot, or shut down, wait a few moments, start up again
    - I've already done disk repair (which is standard practice after any software update)
    - I've taken the battery out and waited, and put it back in again
    I talked to Apple support and tried the following:
    - Shut down and start up by pressing cmd-option-R-P and trying to boot up after the second beep (presumably to reset the pram or something)
    - Creation of a test user account and trying to accept the CD
    None of these work. It accepts a blank DVD perfectly well, but not CD. And the interesting thing is that if I have the blank CD, and burn content onto it with my other mac laptop, and put it back in - it accepts it perfectly. It's only blank CD's that get rejected.
    I talked to the folks at the Apple store, and they said it sounded like a driver issue and that it "should" be fixed with a future update for the particular super drive I have (Matshita DVD-R UJ-857E - you'll find this common with most of the people who are having this issue, it appears to be a Snow Leopard issue with that particular drive)
    PP

  • Optical drive ejecting disks

    my optical drive keeps ejecting blank disks and DVDs.  I've tried different makes and formats but the drive keeps ejecting them.  Any ideas on what can I do to rectify

    The drive accepts discs but they do not mount or are automatically ejected
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    The MacBook Air SuperDrive is designed to be used with MacBook Air and Mac mini computers that do not have a built-in optical drive. For best results, connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
    Reset the System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
    Mac OS X 10.6 Snow Leopard or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
    OS X 10.7 Lion or later: Open System Information by choosing "About this Mac" from the Apple () menu. Then, click System Report.
    If the disc continues to not be recognized, contact Apple, an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.
    http://support.apple.com/kb/HT2801?viewlocale=en_US

  • Second optical drive ejects for no reason

    I've installed a Pioneer BDR-101A Blu-ray drive in the secondary optical drive bay in my Mac Pro 1,1, which has two 2.66 Dual-core Xeons, 5GB RAM, and an NVIDIA GeForce 7300.
    Since installing the Blu-ray drive, the eject button seems to have a mind of its own. Notably, it will eject the tray with nothing in it when the computer wakes up, when I launch Toast, and when I start the computer up. Has anyone else had this problem with a secondary drive in their system. What should I try to make this stop.
    Thanks in advance.
    Chris

    Checked that upon installation. I've now discovered that it ejects when a disc is put into the drive. It sort of can't "hold anything down" and after a few second in the drive, it spits the disc back out.
    Thanks for the suggestion.
    Chris

  • [SOLVED] Disable optical drive eject button

    My little 2-years-old brother loves to play with eject button on my optical drive. I want to find the most simple way to disable it temporary and I want it to be software, i.e. physically blocking the button isn't good. Any software tool for that?
    Thank you for attention, Artyom.
    Last edited by drugcpp (2010-07-01 11:02:31)

    Debian has setcd which does what you are looking for. Here is the description:
    This program allows you to control the behaviour of your Linux cdrom player.
    You can control: auto close, auto eject, medium type checking and tray/caddy locking. You can get information on the volume name of CD-ROMs and other data, and you can set the speed of your drive and choose a disc from a jukebox.
    The source of this package may be an example for cdrom player program developers that wish to exploit the features of the linux cdrom interface.
    Unfortunately, there is no Arch package of it. If no one else beats me to it, I can package it later today

  • Optical drive ejects disks when I put them in

    I tried inserting a disk into the optical drive and it would eject it right after.

    Since my machine was only 2 days old the genius bar let me exchange my mac for a new one after seeing the problem in action, he even tried the DVD in 3 other macs at the counter, 2 could read it and one could not. the problem was thought to be with a dual-layer DVD but he grabbed some other DVDs and it was able to read it, so whatever the difference between the 64-bit and the 32-bit DVDs of windows 7 is, that is what the problem is isolated to in my case. I got my new machine home and it still cannot read the disk. Same problem as before, it reads the disk and promptly ejects it, I think the firmware needs to be upgraded because it does this in windows, during a boot, or within snow leopard. Please let me know what else I can try before I take this machine back.

  • Pavilion dv6-6b51sa optical drive eject button difficult to operate? the button seems very "flush"

    I have recently purchased a new Pavilion dv6-6b51sa.  The button for the optical drive sits very flush to the casing and you have to press quite hard to eject the drive. Is this nomal or should the button sit proud and eject easily?

    I think the trend in design is to make them recessed so they do not accidentally get tripped. I am pretty sure that even if you replaced the drive you would have the same issue. 

  • Empty optical drive ejects randomly (every 2-15 mins)

    I'm having a problem with my recently purchased Studio 1535 laptop....
    Specs:
    Vista Home Premium (SP 1) (32-bit)
    Intel Core2Duo T5750 (2GHz)
    4Gb RAM
    The problem is that every now and then I hear the optical drive make an eject sound, even though there is no disc in it. It doesn't seem to happen when a disc is inside ...I can play CD albums without them ejecting mid play.
    I don't think the behaviour is a serious problem (the noise that the drive makes sounds more or less like a normal eject mechanism). However, it's quite annoying and disconcerting, and I don't think it's 'normal' because we have another Studio 1535 (exactly the same specs) that doesn't behave like this.
    If anyone can help me rectify this behaviour I'd be extremely thankful!
    Thanks,
    Marc
    Message Edited by RelicDelic on 09-06-2008 11:43 AM

    first try upgrading the firmware on the drive. this is different than the drivers or the bios version. if that does not work, try this and let me know... i have heard of this on some older laptops... it is worth a shot in the dark. try both separately so we know what worked....
    --Restore Setup Defaults
    Follow the appropriate steps below for your system:
    1. Restart your computer.
    2. At the first text on the screen or immediately after the Dell logo appears,
    press the <F2> key every three seconds until the message Entering Setup appears.
    3. When the System Setup screen appears, press <Alt> + <F> keys at the same
    time to resotre the defaults. (DO THIS AT YOUR OWN RISK, IF YOU HAVE A CUSTOMIZED BIOS, MAY HAVE TO GO THROUGH IT AGIAN - not a big deal)
    4. Press the <Esc> key.
    5. Press the <Enter> key to save changes and exit.
    Your computer restarts.
    --check if the drive ejects in bios.
    To enter into Bios please perform the following.
    Restart the system.
    Keep tapping the F2 as soon as you see the initial dell logo key to Enters
    System Setup menu (i.e. the bios screen)
    2.Press the eject button on the front of the CD drive.
    3. Restart and try it out.

  • IMac optical drive ejects every disc

    I am trying to transfer tracks into iTunes from CD's but the optical drive on my iMac rejects every disc? Please help!

    Check the settings in System Preferences > CDs & DVDs
    And make sure CDs & DVDs is selected in Finder > Preferences > General

  • My optical drive starching all my discs

    my optical drive is stratching my disc

    stop using it and bring it to Apple or an AASP for diagnosis..something must be wrong with the internal mechanisms.

  • Booting PowerBook G4 WITHOUT optical drive?

    Hi everyone,
    I recently posted a thread about a dysfunctional optical drive. I have had to remove the drive, there was just no getting the CD out and the computer wasn't booting.
    Question:
    Is it safe to boot the computer WITHOUT the optical drive installed. OR
    Should I NOT boot the computer until a new drive is installed?
    Thanks!!
    MLS
    Message was edited by: MLSundar

    should be no problem to boot it with the optical drive removed, nothing will get damaged

Maybe you are looking for

  • Fraud follow up

    I just recently had my account hacked. They used my phone upgrade and ordered an iphone5 and had it over-nighted to Denver. From what the local Verizon store person tells me, they didn't stop FedEx in time and this ******* got this iphone5. Verizon i

  • How do I save/burn photos with their intended orientation

    When I upload photos they display with the proper orientation ie: landscape or portrait. When I burn photos or load them to a web site they all transfer in landscape format. I am using a canon program to upload and it is supposed to auto orient the i

  • How to leave screen pocessing in below code

    Hi all, I have alv tree, while adding node i get some input from user. so i have created a screen with two fields on continue i want to create a node based on the user entered values.   METHOD handle_node_ctxt_menu_sel.     CASE fcode.       WHEN 'AD

  • HTTP Service consumption in ABAP

    Could someone point me to a document or steps that is required to write a abap program to consume a http/https service. We have a need where a provide does not publish a Webservice but has a HTTP POST facility to perform transactions.

  • Is it possible to customize the ARUN table (J_3ABDBS) and delivery creation program (transaction VL04) in SAP?

    I am a student, pursuing MBA and currently doing internship with a big fashion and lifestyle company in India. I am stuck at a place where i need help. We are planning to give customer the control over the time of delivery of their orders as per thei