Powerbook g4 help!!

i just bought a used powerbook g4 17 1.67ghz and it won't turn on, all i hear are the fans running and the hard drive I've tried resetting the power management but it did no good. any idea's ??

Thank you every one for the response. This is what I've done so far and have had no luck! I first reset the pmu like all the blogs tell me to do and that didnt work so the I took out the battery and let the PRAM battery charge, that didn't work so I ordered a used one off line then installed it and that didn't work either.  I then took out the hard drive and hooked it up to a external kit to see if maybe the hard drive was faulty and it was fine. Then then got a monitor adapter and hooked it up to a monitor to see if maybe it was just the screen and still no luck. I'm really thinking its the logic board now. I'm normally not one to pour a ton of money in to some thing that really no longer matters but I love a good challenge and I am not giving up. If any one has any more ideas before I either sell it or buy a cheap logic board please let me know. The following information might help. When I plug it in the battery charges and stayes charged. When I press the power botton no lights will come except for a very slight and dull flash on to the screen and it's gone just as quick as it came on then the fans come on and if I put my ear up the key board I can hear the hard drive spinning. This is a puzzle for me as I normally only rebuild windows machines but this last January I bought a new Mac book iPhone and iPad and have been fixed on apple products.

Similar Messages

  • 10.4.8 killed my powerbook! Help!! :O

    I went a long time without installing any updates on my powerbook so today I figured I would update to 10.4.8 from 10.4.6 among other things. After it installed, my powerbook restarted like usual and then restarted again but this time spent about 20 minutes on the screen with the apple logo and the little whirling thing underneath.
    I took it to a mac genius who tried some stuff and told me that he could not fix it--that I must do an archive and install otherwise he would charge me for it. I went home and tried to fix permissions first and I got this message:
    -Keys out of order.
    -Rebuilding Catalog B-tree.
    -The volume Macintosh HD could not be repaired.
    -Error: The underlying task reported failure on exit.
    -1 HFS volume checked
    -1 volume could not be repaired
    -Repair attempted on 1 volume
    -1 volume could not be repaired...
    Great! So I just resigned myself to doing an archive and install and when I get to the screen to select the destination volume, nothing appears!
    I have not backed up my data either so desperately need to copy the files somehow...
    A simple OS update gone wrong!
    What can I do?
    15" PowerBook G4 1.67Ghz 2GB RAM   Mac OS X (10.4.6)   Logic 7 / Yamaha C5 & MO8

    Glad to help. If you are lucky you'll recover your files. Once that is completed be sure to do the following before reinstalling OS X:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    After the formatting has completed quit DU and return to the installer. Now proceed with the installation. After you get a successful installation going you can restore your files from the backup.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Cleaning my powerbook, any help is very much appreciated

    Hello,
    My 12" powerbook is getting a bit grimy in places, and I was wondering if anyone knows any household stuff which will clean it up a bit. Also, I have 2 light scratches on the front of the laptop, and I was wondering if anyone knows any kind of solvent or liquid which would help in the cleaning up of the scratches so it makes it look new again. When you have a machine as good looking as a powerbook and you get a couple of light scratches, it really does make the laptop that much more undesirable. Thanks, and any help is welcome

    i use a light multi purpose cleaner on the case and water and a microfiber cloth on the screen not any chemicals it will cause it to dry out and start to crack.the only cleaner apple recommends is iklear but its pricey but it will do wonders for the whole computer

  • G4 Powerbook nightmare help?

    Please help. I'm on my second 17" g4 powerbook and I can't believe I'm having trouble again. I barely even use this one, just for emailing and some random safari browsing. Nothing too heavy. I was working off the battery the other night and forgot to plug the laptop back in to the AC source before I went to bed. Woke up and everything seemed dead, so I plugged it in and forgot about it.
    Several hours later, when I attempted to start up the powerbook, I get the blinking "? and I know that's not good. I try every startup disk I own and either they can't find a startup volume to troubleshoot or with my original powerbook disks, I get kernel panics. What the heck?
    I bought this from a friend who installed Leopard on it. He hasn't transferred over the OS disks to me yet, but since I can't get it to reboot from the original powerbook disks, I'm not sure that if I buy the newest Leopard disks, that would make a difference.
    Is the hard drive completely fried? Or is it wiped clean for some reason? Since some of my startup disks can't find a startup volume, I'm wondering if for some reason, the directory structure is totally messed up. Is there a way I can create a new directory or reformat the hard drive in terminal or something?
    Or am I destined to replace the hard drive? I'm a life long mac user, but definitely not impressed with the 17" g4 powerbook. Too many headaches with this computer...

    It's possible that the internal backup battery is discharged. It helps the computer remember a lot of things, including the startup volume. If the battery let the computer forget what startup volume to use, you could get the question mark.
    Remove the main battery and leave the computer on the AC adaptor for several hours. If the internal battery can still hold a charge, that will help.
    Have you tried booting in Safe Mode? Hold SHIFT during startup. That does some directory cleanup that may help.

  • Powerbook G4 help needed!!!

    I've seen this question asked a million times but since I haven't backed up recently I wanted to ask it again, stressing that I have not backed up recently.
    My 15" powerbook g4 refuses to get beyond the grey apple screen. I've got it set up so that I have to type in a password before it goes to the main screen, but it won't even get to that point.
    Before this happened, I accepted some security update and it didn't complete so I got an error message saying it would throw itself in the trash and to try again another time. Then Excel crashed on me each of the three times I tried to load it. So I restarted the computer and it wouldn't get past the grey screen. Then I held down the power key to turn the thing off entirely. I waited, I turned it back on and same grey screen. The dial turning for ages.
    Help please?!? Apple support is closed and I start a new job in the morning that requires me to bring my computer.

    Using disk utility: [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    Grey or blue screen startup issues (also applies to 10.4) [Your Mac won't start up in Mac OS X|http://docs.info.apple.com/article.html?artnum=106464]
    Try starting in Safe Mode by holding down the shift key at startup. If that works you're in a much better position than some. Report back.
    Two things seemed to be solutions for Security Update 2008-008 problems from what I have read, and may also work with 2009-01.
    One is Archive and Install which will replace the corrupted system but then requires you reapply all your updates. Select the keep settings and preferences when doing A&I. Make sure you select that option when doing A&I if you want settings and preferences kept. Some third party applications may need reinstalling if they have special components.
    [Mac OS X: About the Archive and Install feature|http://support.apple.com/kb/HT1710?viewlocale=en_US]
    [X-Lab Archive and install|http://www.thexlab.com/faqs/archiveinstall.html]
    [Kappy's A&I instructions|http://discussions.apple.com/thread.jspa?threadID=1823034&tstart=0 ]
    [How to get files from a previous home directory after Archive and Install|http://docs.info.apple.com/article.html?artnum=107297]
    The other is to try to re-install the security update on the main drive while booted from a secondary drive or in Single User Mode. This could be from another Mac computer while your first one is in Target Disk Mode, perhaps a bootable backup drive, or possibly from your installer disc. Here's references for those methods:
    http://discussions.apple.com/message.jspa?messageID=8728797#8728797
    http://discussions.apple.com/message.jspa?messageID=8733921#8733921
    http://discussions.apple.com/thread.jspa?messageID=8634535#8634535
    A version of this is to use Single User Mode and Terminal to re-install the update as in:
    http://discussions.apple.com/message.jspa?messageID=8991074#8991074
    Updating
    Certain steps appear to minimize the risk of an update producing problems.
    Number one is to make sure you have a bootable clone backup (a backup from which you can boot, copied using a cloning tool such as CarbonCopycloner or SuperDuper)) of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
    Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk. Permissions repair can, and is probably best, done when booted from your internal drive.
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
    [Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
    You can also go to the step of booting into safe mode to do the install.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
    Repair permissions again afterward.
    It also helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
    The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
    Almost all of the above steps (except backup) have been questioned as to necessity because probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe.
    [BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
    [Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]

  • Problems with my powerbook, need help!!!

    hello
    1) my powerbook is over 1 year old, suddenly my backlight do'not working anymore, when i am ind a dark rum, most of time it won't turn on, but som time it turn on, bus there are no light comming up from, even i turn the light too full.
    2) the light that will light when powerbook is in sleep not working probably, it on all the time, even when the powerbook not in sleep.
    3) my auto ambient light change is not working probably, it is not sensitiv enoughe, and som time, when i was ind a very bright place, the light turn lower, insteed turn brightere. anybody can help me!!! becuse, if i fix it ind af apple workshop, it will kost me a lot of mony, when my powerbook is not under ganranty anymore.
    thx
    machi

    Hey Macho Man,
    No problemo. You could go into the powerbook yourself and stick some LEDs to the side of it. Of course, if you screw up your computer will be messed up forever. So maybe not...

  • Hello, I purchase a radeon 9800 pro 128mg, I have a mac G4 (Double mirrors) I am replacing the old Radeon 9800 pro 128mb. I am using  10.4 TIGER. I installed the card and I am still getting a black screen. my monitor works on my g4 powerbook desktop Help?

    Question #1
    Hello, I purchase a Radeon 9800 pro 128mb  from ebay.  I own a mac G4 ( double mirror doors) I am using tiger10.4 I am replacing my old radeon 9800 pro 128mb with one from ebay. I installed the card properly but I am still getting a black screen. why?  Monitor works on my powerbook G4 laptop.
    QUESTIN #2
    Can I upgrade my hard drive to a 2tb with the proper PCI card and cable ?

    #1, tough to tell, is it using the VGA or DVI output?
    #2, yes, if you can find a Mac compatible card.

  • Powerbook death - help!

    Hi. I'm having major problems with my 12inch G4 1.5ghz Powerbook and have just rather annoyingly been turned away from the Regent Street apple store in London for not having an appointment with a genius... perhaps I could have booked one if my mac worked?)...
    background - I was using facebook and I got a message telling me my mac needed to restart, so I did. It got as far as the apple logo, then told me to restart again, so I did. Now it gets as far as the apple logo and something happens, it freezes and looks as though the apple logo is shot across the screen (see image - http://img356.imageshack.us/my.php?image=brokenvm8.jpg)
    I've been through all the forums I can find in the hope of finding the answer but I'm completely stumped.
    The commandoption+pr does nothing, neither does ctrlshift+optionpower. The mac freezes before it gets a chance to restart. It won't boot from a CD or into safe mode. I can however get into a console by holding apple+s when restarting but I don't know what to do in there, if anything.
    Anyone have any advice??
    Thanks!
    Jamie

    Hi Jamie,
    Ok... here are instructions on Target Disk Mode:
    Transferring files between two computers using FireWire
    To transfer files using FireWire:
    1. Shut down the first computer and leave the second computer on.
    2. Connect the two computers using a 6-pin to 6-pin FireWire cable. (If both computers have higher-speed FireWire 800 ports in addition to the standard FireWire 400 ports, you can use a 9-pin to 9-pin cable with the FireWire 800 ports to transfer data at higher speeds.)
    3. Open System Preferences, click the Startup Disk, and click Target Disk Mode. (Or, start up the first computer while holding down the T key.)
    4. A disk icon for the first computer appears on the desktop on the second computer. Drag files to and from the disk to transfer them.
    5. When you finish, eject the first computer's disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
    6. Push the power button on the first computer to shut it down and disconnect the FireWire cable.
    "I was using facebook and I got a message telling me my mac needed to restart, so I did. It got as far as the apple logo, then told me to restart again, so I did."
    Typically, when you get the dialog telling you to restart your computer it's the result of a kernel panic. Usually just rebooting your Mac will resolve the issue but... here's more information on kernel panics just in case: Resolving Kernel Panics
    You should be able to access your files on the PBook via Target Disk Mode!
    Carolyn
    Message was edited by: Carolyn Samit

  • Cant download Aperture Demo on Powerbook need help

    Im trying to download the demo version of Aperture on my PB G4 17". I checked out all the specs and I should be good. My PB has 2GB, 1.25GHz and at least 15 Gigs left on my Hard drive. I used the Aperture Checker and it says I dont have the minimum requirements but I do.Thanks for any help.

    i think the problem here is the 1.25GHz G4 processor ...
    there are ways around the install checker ... and it will run afterward, but the installer balks at the 1.25GHz G4 ...
    actually did you just try to install - screw the compatibility checker ...

  • Need to eject CD powerbook G4-Help!

    Laptop has been running fine, no sign of trouble, then today, what I believe is called a "kernel panic" where it tells you to shut off computer and restart. Have done that around 50 times, it starts booting up, apple comes up, then it goes back into kernel panic and won't boot all the way.
    I then put in Disk Warrior to try to boot off so I could see about repairing the drive, but it won't boot off of DW cd and now I can't get the CD out because the computer won't boot up. Tried pushing eject of course, does nothing.
    Is there any other way to get the CD out so I can put the Apple install disc in and see if I'm able to boot from that?
    Thanks for any help!

    Thanks, I was actually able to eject it. Now I'm trying to hook the laptop up to my Imac as a "target" firewire disk, but my imac isn't recognizing it.

  • Dropped my PowerBook G4. help..

    ..I did a terrible thing..dropped my PowerBook. It was from a height like knees. It is still working, but the screen is damaged. Even though I can see everything it is rather difficult to close it. and the case is a bit ''into the screen'' in bottom corner.
    I was just wondering what should I do. I know I should repair it, but is it expensive??...or maybe it's nothing and I can keep on workin on it?
    Thank you!

    Hi, Venchito, and welcome to Apple Discussions.
    I assume your Powerbook is Titanium, not one of the newer Aluminum models, about which I know very little. The following comments presume you have a Tibook.
    If the Powerbook still works, of course you can go on using it as long as it continues to do so. The display assembly (which includes the LCD itself, the metal bezel, the upper latch mechanism, the hinges, the internal backlight, the sleep light and the three cables that connect the LCD, backlight and sleep light to the computer) is the Powerbook's most expensive part by far. Unless you get a stellar price on a good used display and can do the work yourself, it won't be worthwhile to repair your Powerbook. If you continue to use it "as is," be aware that any tightening or binding in its hinges as a result of the fall will shorten their life expectancy dramatically, and if/when they break, you'll be forced at that time to choose between replacing your display and moving on to a different computer.
    With smart shopping and patience, you could replace the PB itself with an equivalent or newer used model in working condition for the same money you'd spend having a technician repair yours. Of course on its face, this suggests that a used display ought to cost significantly less, but the labor required to remove one from another PB is substantial, and that labor cost plus a profit margin gets added to the price of the salvaged display before you buy it — making it pretty pricey. Then if you also have to pay to have someone install it for you, you're apt to be right up around the fair market value of a good used Tibook.

  • Problems firing up your g3 powerbook need help read here!!!!!

    For most the reset switch on the back of the powerbooks works well for startup errors for the rest of us.
    There is another alternative.
    which is if you have issues starting up your powerbook just restarting it doesn't work and you have tried and tried.
    try the pram battery just look under your cd drive for the pram battery pull the battery reconnect the battery and no issues after.
    because a lot of people have had issues with this problem i decided to post this here because it is hard to keep a powerbook going

    Good advice! (fixed my Pismo)
    ...you can get a new PRAM battery here and restore your PowerBook to it's former glory... : )
    http://www.powerbookmedic.com/G3-PRAM-Battery-Replacement-for-Lombard---Pismo--- BRAND-NEW-p-16263.html

  • Sony Clie with Powerbook? Help

    I just got my Dad's old PDA which is a Sony Clie PEG-T665C which runs Palm OS. I was wondering will this work with my Apple Powerbook. The reason being is because I noticed the CD had "windows only"
    I REALLY want and hope for this to work, are there anywork arounds... I just want it to sync with iCal and Address book so I do not see why this could not work... So any ideas on how to setup this up please? Oh also of note, this is my first palm so I am new to it...
    Thank you,
    TM

    Check out Missing Synch at:
    http://www.versiontracker.com/dyn/moreinfo/macosx/19749
    Joe

  • Install OS X 10.5 on powerbook G4 help

    i need to upgrade my operating system from tiger 10.4.11 to leopard 10.5. my computer meets all the tech specs but i wanted to find out of i can install any version of leopard OS X 10.5 (e.g. 10.5.6) or if i have to start at OS X 10.5 and then update via software updates (I need to get up to 10.5.8 for the iphone 4 to work). i'm having trouble finding OS X 10.5 in general, but have been able to find 10.5.6.

    maikib wrote:
    i'm having trouble finding OS X 10.5 in general, but have been able to find 10.5.6.
    Be careful, 10.5 disks can be hardware specific disks and all seem over-priced.
    You can order them from Apple Store's phone sales, 1-800-MY-APPLE (1-800-692-7753), for $129 USD. Alternatively, Customer Service and Sales Support at 1-800-676-2775.
    -mj

  • Help with locked firmware

    i cannot open my mac in single user mode and i think it is because i was given by my university a locked firmware powerbook. please help me unlock it.
    thanks
    disfasia

    I don't know how reliable/accurate this information is but this website has some ideas for removing an Open Firmware password:
    http://www.securemac.com/openfirmwarepasswordprotection.php
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    FWSucker:
    Retrieving the Password Used with Software
    If you are allready booted into the MacOS the Open Firmware Password can be retrieved by using the application FWSucker created by mSec. We warn you of this program because many administrators believe that their Macs are secure at night when they shut them off just because they have the Open Firmware Password set. Be cautious of this application, and if you are using any desktop security software we suggest keeping this program restricted by it.

Maybe you are looking for