PowerBook keeps freezing after sleep.

I have a 1Ghz PowerBook that often freeze when I try to wake it up from sleep. The screen goes dark and a box appears in the middle telling me that I need to hold down the power button for a few seconds and to restart, it's written in a few different languages. I bought a new battery for it and have been having this problem since then. It never happened with my old battery, but I made sure that I calibrated the new one properly.
I'm running OSX 10.4.8 on it and have 1gb of memory.
Does anybody have any suggestions about what is happening and what I can do to stop it from happening anymore?
Thanks.

You are experiencing a Kernel Panic as seen and described in Apple doc.#106227.
FJ has some good KP tips.
Or, do everything, in order, in Dr.Smokes Resolving Kernel Panics and don't leave out any steps (most used KP site in the forums).
Quote from Dr.Smoke "My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein"
Here's more at a brody's KP site.
Cheers!
DALE

Similar Messages

  • 17 " Powerbook G4 freezes after sleep

    I have a "17 Powerbook G4 1.33GHZ  768 Ram osx leopard 10.5
    everytime I wake it from sleep the screen comes back up everything apears on the bar across the top except the wifi symbol.
    When you try to use it it will work for like a second then freeze.
    could this be a ram issue maybe?

    I'm more incline to lead toward there being a fault with the logic board, however there wouldn't be any harm in trying some different RAM modules in your PowerBook to see if that makes any different. There could be a number of reasons why this happens. I've known an iBook to have done this in the past and that turned out to be a fault with the logic board mainly around the graphic controller.
    Try some more memory and see if that helps.

  • I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.

    I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.  I will post my computer's 'specs' below.  I installed Lion, from Snow Leopard, through the App store.  The first week, it worked like a dream, and was loving my brand new computer, or so it seemed.  I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2. 
    The freezes are sporatic at best, and cannot be narrowed down to one app.  I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there.  That fixed the problem.  For about three or four days.  From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument).  My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out.  That would not be good for me, as I am a High School student, who works online. 
    So I then decided to go to the Apple store, see what they said.  They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board.  This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone. 
    So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion.  Figuring maybe my data was corrupted during install.  This helped for a day or two, and happened again.  So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install.  I got my computer back last night.  Now, I am not saying that didn't help.  Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself).  I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours.  Which, let's be honest is still a lot. 
    So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas?  Or guarenteed fixes?  I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people.  Thank you to those who read through my whole spiel, and thank you to those who will help me!
    [Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome.  Especially DIY fixes.  (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
    Macbook Pro
    15-inch, 2.53GHz, Mid 2009
    Processor:  2.53 GHz Intel Core 2 Duo
    Memory:  4 GB 1067 MHz DDR3
    Graphics:  NVIDIA GeForce 9400M 256 MB
    Software:  Mac OS X Lion 10.7.2 (11C74)

    Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

  • Satellite Pro A210 PSAFHE - Windows 7 - freezes after sleep/hibernate

    I have a Satellite Pro A210 PSAFHE running dual boot Windows XP/7
    Using Windows 7 - either 32 or 64 - the system always freezes after sleep/hibernate.
    This never happens with XP which sleeps and hibernates OK..
    There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    I like System 7 and use it on my other computers but without sleep/hibernate I will revert to XP.

    Hi
    > There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    Sorry mate but you are wrong.
    All Win 7 drivers for Satellite Pro A210 are released on the Toshiba European driver page I recommend checking it again
    Since this issue does not appear using Win XP, I can say for sure that this has nothing to do with the hardware but its a software related issue
    I recommend updating the graphic card driver
    Furthermore there is a new BIOS for Sat Pro A210 PSAFHEits v2.0
    Check if you are using the latest version

  • Macbook pro keeps freezing after updating to Maverick

    my 1 year old macbook pro keeps freezing after i updated from mountain lion to maverick.
    all the time i had mountain lion i can remember maybe once where my mac froze. now, it froze probably 5 times in the last 5 days.
    how can i fix this, or better still - how can i revert back to mountain lion? no, i never used time machine and i have 90gb left on my disc.
    annoying.

    See ds store's user tip -> https://discussions.apple.com/docs/DOC-6162.
    Good luck,
    Clinton

  • Lion freezes after sleep

    Anyone find a fix for the freeze after sleep on Lion

    Try using disk utility to verify/repair your hard drive, also repair your permissions. 

  • IMac 2007 freezes after sleep and then can't find hard drive after reboot.

    I'm having a problem where my mid 2007 iMac (2.4 GHz core duo w/ 6 Gb of ram) freezes after sleep.  It seems to happen only when an application was open at the time of sleep.  The freeze manifests as the cursor turns into the spinning wheel, but the computer can't do anything.  Command-option escape doesn't work.  Most of the time after I reboot, the iMac can't find the hard drive.  If I leave the computer off for 15 minutes then it will reboot ok.  Is my hard drive going out or do I have another problem?  I'm running Mountain Lion 10.8.5.  I've repaired permissions, verified the hard drive and reset the NVram but I still have the problem. 

    Here is the console right before the time of the crash.
    11/10/13 10:02:13.069 AM SyncServer[18050]: [0x7fe02140bde0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
    11/10/13 10:02:13.912 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    11/10/13 10:02:16.947 AM iCalExternalSync[18051]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
              0   iCalExternalSync                    0x000000010186ca60 iCalExternalSync + 125536
              1   iCalExternalSync                    0x000000010185bac9 iCalExternalSync + 56009
              2   iCalExternalSync                    0x000000010186b694 iCalExternalSync + 120468
              3   libdyld.dylib                       0x00007fff8abf17e1 start + 0
              4   ???                                 0x0000000000000005 0x0 + 5
    11/10/13 10:02:16.948 AM iCalExternalSync[18051]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
    11/10/13 10:02:16.959 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021496b30 to com.apple.iCal
    11/10/13 10:02:31.511 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    11/10/13 10:02:32.786 AM iCalExternalSync[18053]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
              0   iCalExternalSync                    0x000000010618ba60 iCalExternalSync + 125536
              1   iCalExternalSync                    0x000000010617aac9 iCalExternalSync + 56009
              2   iCalExternalSync                    0x000000010618a694 iCalExternalSync + 120468
              3   libdyld.dylib                       0x00007fff8abf17e1 start + 0
              4   ???                                 0x0000000000000007 0x0 + 7
    11/10/13 10:02:32.787 AM iCalExternalSync[18053]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
    11/10/13 10:02:32.797 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021434b60 to com.apple.iCal
    11/10/13 10:04:21.138 AM com.apple.usbmuxd[29]: _SendAttachNotification Device f0:d1:a9:1b:e1:0b@fe80::f2d1:a9ff:fe1b:e10b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
    11/10/13 10:04:46.805 AM iTunes[15640]: Entered:_AMMuxedDeviceDisconnected, mux-device:48
    11/10/13 10:04:46.805 AM iTunes[15640]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:48
    11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Mux ID not found in mapping dictionary
    11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Can't handle disconnect with invalid ecid
    11/10/13 10:11:17.664 AM com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)
    11/10/13 10:11:17.664 AM com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)

  • Help: Macbook freezes after sleep and gray screen freeze on startup

    I've got a new MacBook (45 days old, minimal usage) and I'm starting to have some problems.
    When my computer goes to sleep after inactivity I have a hard time waking it. The screen turns on right away but the mouse/cursor remains frozen. The computer does not respond to any keyboard commands. I usually have to reboot the machine when this happens. I noticed this problem a few weeks ago and it has since become more and more frequent.
    I've also noticed that with some regularity my computer freezes on the gray screen during start up and never reaches the mac icon. This has become more and more frequent since I first noticed the initial problem and happens one in every 3 or 4 startups.
    I haven't installed any new software except for the regular software upgrades. Nothing extraordinary.
    Is it possible that these problems are related? Am I doing something wrong?
    Any help would be greatly appreciated.

    The grey screen on startup may be the known issue, especially if you start to get vertical lines on the screen. If you can reboot using PRAM reset, go to the displays control panel, set the resolution to something besides your current resolution, then revert to your original setting. That should fix that part.
    As far as the freezing after sleep goes, I had a similar issue where the macbook would not actually go to sleep (white light stayed solid), and opening the lid would result in a dimmed screen that I had to force-shut down the computer to get out of. After sending it in for RSD, this seems to have been resolved.

  • Imac freezes after sleep

    Just 4 days ago, I noticed that my iMac freezes after sleep, I haven't added or altered any programs nor downloaded any new software.
    System was working perfectly prior to this.
    Any ideas? My iMac is a 21.5 inches, 3.06 GHz Intel 2Duo, 4GB 1067 MHz DDR3, 500GB HDD
    Thanks

    Just 4 days ago, I noticed that my iMac freezes after sleep, I haven't added or altered any programs nor downloaded any new software.
    System was working perfectly prior to this.
    Any ideas? My iMac is a 21.5 inches, 3.06 GHz Intel 2Duo, 4GB 1067 MHz DDR3, 500GB HDD
    Thanks

  • G3 PB freezes after sleep

    I've got a G3 series Powerbook, either 1st or 2nd gen, don't know which.
    It has OS 9.2.2 installed on a 2 gb HD, 256 megs RAM.
    It has this funny habit of freezing when you wake it up after sleeping, even for a moment. I've tried starting with just the base OS active, and it still happens, so it seems it's not a problem with extensions or conflicts.
    It also quits the Finder and restarts, then freezes after a moment when you eject the wireless card.
    Also, the drive has only 78 megs free.
    Any thoughts on what might be the cause/solution for this?
    Thanks

    Hi, Brett -
    Make sure that there is a folder named Multiprocessing in the Extensions folder (in System Folder), and that that folder contains the file named Apple CPU Plugins. The absence of that can cause wake-from-sleep problems -
    Article #TA22088 - Mac OS: Do Not Remove Multiprocessing Folder
    If that folder is missing, it can be easily replaced without installing any software - insert an OS 9.2.1 Install CD (do not boot to the CD), then go into the System Folder on that CD and copy the Multiprocessing folder from within its Extensions folder to the proper location on your hard drive.
    Other possible causes -
    • There are some issues linked to the version of CD/DVD Driver extension and an Iomega Driver extension; these can also affect sleep.
    http://discussions.apple.com/thread.jspa?threadID=121946
    • In some configs the extension named InputSprocket Extension can cause some conflicts with 3rd-party USB extensions. Testing for such conflicts (such as by disabling the InputSprocket Extension temporarily) can reveal whether they may be at play.

  • My MacBook Pro is extremly slow and keep freezing after upgrading to Yosmite, please advise

    My MacBook Pro is slow after updating to Yosmite it keep freezing and Safari most of the time not responding, generally speaking the performance is way worse than Mavericks when it was installed and here is my config:
    EtreCheck version: 2.0.11 (98)
    Report generated December 1, 2014 at 12:53:23 PM GMT+2
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2012) (Verified)
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 4000 -
            Color LCD 1440 x 900
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Uptime: one day 16:9:57
    Disk Information: ℹ️
        APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) /  [Startup]: 748.93 GB (80.35 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 60
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) Support
        [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) Support
        [not loaded]    com.nike.sportwatch (1.0.0) Support
        [not loaded]    com.novatelwireless.driver.3G (3.0.7) Support
        [not loaded]    com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
        [not loaded]    com.option.driver.Option72 (2.15.0) Support
        [not loaded]    com.option.driver.OptionHS (3.26.0) Support
        [not loaded]    com.option.driver.OptionMSD (1.21.0) Support
        [not loaded]    com.option.driver.OptionQC (1.11.0) Support
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
        [not loaded]    com.vodafone.driver (3.0.5) Support
        [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) Support
        [not loaded]    de.novamedia.driver.NMSamsung (0.0.2) Support
        [not loaded]    de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
        [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
        [loaded]    net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
            /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) Support
            /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) Support
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) Support
            /System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
            /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
        [not loaded]    com.novatelwireless.driver.3GData (3.0.7) Support
            /System/Library/Extensions/Vodafone.kext/Contents/Plugins
        [not loaded]    com.vodafone.driver.Data (3.0.5) Support
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.CS5ServiceManager.plist Support
        [running]    com.nike.nikeplusconnect.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.rim.BBAlbumArtCacher.plist Support
        [running]    com.rim.BBLaunchAgent.plist Support
        [running]    com.vsearch.agent.plist Support
        [failed]    de.novamedia.VodafoneDeviceObserver.plist Support
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist Support
        [invalid?]    com.adobe.SwitchBoard.plist Support
        [running]    com.autodesk.backburner_manager.plist Support
        [running]    com.autodesk.backburner_server.plist Support
        [loaded]    com.autodesk.backburner_start.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [loaded]    com.oracle.java.JavaUpdateHelper.plist Support
        [running]    com.rim.BBDaemon.plist Support
        [not loaded]    com.vsearch.daemon.plist Support
        [running]    com.vsearch.helper.plist Support
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.BlueStacks.AppPlayer.LogRotator.plist Support
        [loaded]    com.BlueStacks.AppPlayer.Service.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UninstallAgent.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
        [loaded]    com.facebook.videochat.[redacted].plist Support
        [invalid?]    com.jdibackup.JustCloud.autostart.plist Support
        [invalid?]    com.jdibackup.JustCloud.signup.plist Support
        [running]    com.nero.HSMMonitor.plist Support
    User Login Items: ℹ️
        uHD-Agent    Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
        iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application (/Applications/Dropbox.app)
        SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        uTorrent    Application (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
        AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
        Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
        net.juniper.DSSafariExtensions: Version: (null) Support
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
        Silverlight: Version: 4.1.10329.0 Support
        MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
        JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
        BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
    Safari Extensions: ℹ️
        Awesome Screenshot
    3rd Party Preference Panes: ℹ️
        Flash Player  Support
        FUSE for OS X (OSXFUSE)  Support
        GoPro  Support
        Growl  Support
        Java  Support
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            42%    firefox
             9%    WindowServer
             4%    system_profiler
             2%    hidd
             1%    plugin-container
    Top Processes by Memory: ℹ️
        1.44 GB    firefox
        215 MB    Viber
        155 MB    softwareupdated
        146 MB    mds_stores
        146 MB    WindowServer
    Virtual Memory Information: ℹ️
        206 MB    Free RAM
        3.39 GB    Active RAM
        3.14 GB    Inactive RAM
        1.16 GB    Wired RAM
        21.12 GB    Page-ins
        790 MB    Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Mac Keeps Crashing after sleep

    I have a brand new iMac.
    It works perfectly, except that it crashes after waking it from sleep. Not always, but frequently enough to be quite annoying. I initially thought this was due to network hardware I had installed for a network storage drive, but I have since uninstalled it, and it did not fix the problem.
    I will wake if from sleep, it will work for about 30 seconds, then the screen will turn pink (or white, or gray) and it will freeze. Sometimes this will happen when I have pressed no keys. Sometimes this will happen when I go to start a program.
    I called the support line, and they had me do a hardware reset (holding Command, Option, P, R while starting.) But this did not fix the problem.
    If I set my computer never to sleep, I have no problems.
    I am trying to avoid bringing my iMac back to the Apple store. I read a post once where a person said this occurred because of a wireless router problem. Has anyone heard of this as a cause? I am using a Lynksys, but was thinking of getting Apple's Time Capsule anyway, and will do so now if this would fix the problem. Does anyone know if this might fix the problem?
    If it is any help, this is the error message I always get in Console Messages:
    12/19/10 11:05:10 AM apsd-ft[146] <APSCourier: 0x100609db0>: Stream error occurred for <APSTCPStream: 0x102f02bf0>: Error Domain=NSPOSIXErrorDomain Code=57 UserInfo=0x102f01480 "The operation couldn’t be completed. Socket is not connected"
    12/19/10 11:05:10 AM apsd-ft[146] <APSCourier: 0x100609db0>: Stream error occurred for <APSTCPStream: 0x102f02bf0>: Error Domain=kCFErrorDomainCFNetwork Code=2 UserInfo=0x102e29c10 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)"
    Any advise appreciated, thanks.
    -Lee

    I could not find any kernal panics in the console list, but I did figure out the problem.
    Apparently, network storage devices can be problematic if the iMac sleeps, and they do not support sleep. I have since purchased a Time Capsule as my router, and now have my network storage device plugged into this. Actually, my router could have been the problem also, as it does also serve as network storage.
    For anyone who reads this who has problems with the iMac crashing after sleep, consider what network storage devices might be connected.
    -Lee

  • Safari keeps freezing after the 5.1.4 update

    Safari keeps freezing up after the 5.1.4 update. I have no extensions. I also tried using firefox and it too freezes so it might not just be a safari problem.

    I'm convinced that something is possibly broken in Safari 5.1.4.  It's the first Safari update that has actually forced me back into using Google Chrome.  I've had intermittent beach balls and system wide stalls since moving to 10.7.3 (including Safari 5.1.4).  Removed every extension in Safari without avail.  Activity Monitor and Console never conclusively pinned down the culprit.  I finally moved back to Chrome, and my system is working again as intended.

  • Droid RazR keeps freezing after ICS upgrade

    After the ICS upgrade my Droid RazR keeps freezing & I have to reset it by holding down the on-off & volume down buttons...I did a factory reset as well which seemed to help but it still sporadically freezes up especially when texting...Is anyone else having this issue & know of a solution..? My battery drains a lot faster now too I've noticed.

    In another discussion thread, regor3 did the FR but did not allow the reset to restore the apps. Instead they reinstalled the apps one at a time on their own and things improved dramatically. There are apparently some old GB apps that don't play well with ICS.

  • Why does my iphone 4s keep freezing after downloading ios7?, why does my iphone 4s keep freezing after downloading ios7?

    my iphone4s keeps freezing immediately after downloading the ios7 update.
    has anyone else encountered this?
    will there be an update to fix this?
    what are people doing to solve this problem?
    thanks

    Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
    Genius Bar Rerservation :  http://www.apple.com/retail/geniusbar/

Maybe you are looking for