Powerbook pismo with OS 10.4.9 not display battery time

I was very curious why my newly upgraded powerbook pismo (400 MHz, 1 MB, 55 GB drive, firewire, etc) would no longer display "time remaining" when on battery or external voltage.
I was getting very close to ordering another battery (6600 mAH) for $150 but decided to do some research first. Lo & behold on the archives there were 30 entries about the same problem on OS 10.4. So in a nutshell, a powerbook pismo with OS 10.4 will not display battery time remaining no matter how many brand new batteries you mail order.
I'll learn how to use system profiler more often (remaining capacity mAh/amperage = time remaining).

There's nothing at all wrong with preferring APpleWorks and wanting to continue using it. It's a bit unfashionable these days, but there are many people who have discovered how powerful, flexible and easy it is to use and continue to use it despite the development of alternatives!
Of course, it does have the drawback of not being intel native, so performance on intel-based Macs will be relatively poor in comparison to iWork, but if that doesn't cause you any problems in use, then it's purely a matter of what you want to use not what anyone else thinks is appropriate!
That said, what exactly is the problem? Can you scroll by clicking the scroll arrows and dragging the scroll bar, but not by using the mouse wheel?

Similar Messages

Take picture with iPhone but it does not display it

I take pictures with iPhone but it does not display it

Take a picture. Tap on the thumbnail at the bottom left (portrait) or bottom right (landscape) of the screen to display it and access the rest of the camera roll. Why is everybody complicating this?

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

Websites with flash photo galleries do not display photos in firefox.

I manage several websites that use the 'expose' photo gallery. Expose uses flash to display photos in the photo galleries. When you go to one of these web sites and click on the photo gallery link, the photos are not displayed, the page shows the gallery buttons but no photos. Using Internet Explorer or Chrome browsers, the photo galleries work fine. Here are 3 web sites to view;
www.wishardgallery.com - click on photo gallery
www.applemanart.com - click on art gallery
www.jewelimages.com - click on any of the gallery links on the left menu
Do the same with IE or Chrome to see the photos displayed.

Some galleries are displayed via JavaScript, so if they aren't working the make sure that you aren't blocking JavaScript.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key). 
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

With IE UIX buttons are not displayed correctly

Hello there,
We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
Thanks,

Hi Andy,
sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
it happens with random buttons...
i haven't seen this problem in mozilla. its quite frequent in IE.
our customer is very annoyed by this problem :(

Lightroom 4 (beta and current release) - Issue with Select Catalog screen - catalogs not displaying

I noticed this during the beta test version of LR4 and was hoping it would be corrected in the actual release (which I installed yesterday). Here's the issue:
When the Select Catalog window opens, catalogs will not display unless I click in the empty space in the window (first screenshot)...then they will appear one by one as I start to click (second screenshot) until all are displayed.
Does anyone have any suggestions?? These catalogs are NOT on a network drive, they are on my desktop machine (Win Vista 64-bit).

I have the identical problem.
LR3 worked perfectly. LR4 won't refresh the Catalog screen at startup without me clicking on each entry. Only when an entry is selected will it appear.
I have an nvidia GeForce 9800GT video card, supporting dual monitors.
I'm using Vista 64.
I just upgraded to LR4 64bit, and immediately had this problem.
I installed the most current video driver (2/12/2012) with no change in problem (or performance).
I have not noticed any other program having issues, and have not changed any hardware recently.
I am also noticing that LR4 is visibly slower than LR3, to the point where most sliders don't slide evenly, but jump in increments unless I move VERY slowly.
I've watched the processor load using resource monitor: it is not peaking over about 65% during slider actvitivity.
I have an Intel Core2 Quad CPU Q9550 @ 2.83GHz with 8 gb of ram.

Digital Clock Time is not display present time

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Portlets not displayed first time until refresh

Hi,
I have a strange bug when using WLP 8.1 sp5.
When I go on a page for the first time, my page (Portal Page) is bad displayed : its title is diplayed but the inner portlet is not displayed.
When I look at the source, I can see that the Portal rendering stopped at the page level (no HTML for the skeleton of portlets).
If I refresh the page (just F5 or refresh button), the portlet "magically" appears.
Do you have any idea ?

For the both .portal and desktop
It happens after login.
I use a backing file with handlePostBackData method to check the login action.
If everything is ok, I redirect the user to the private space.
On this space, another backing file check that the user is authorized to access to the private space (so it checks for destroyed sessions, url hacks, ...).
I can put the code of the backing files if you need it.
After some tests, it seems to be a problem in relation with the page label. If the page label is a book , the portlet don't dipslay, but if the label is the full way to the page, it appears immediately.

Ical events not displaying correct time zone

Hi All,
I have a weird issue and I'm not sure if it's an iCal or an entourage problem. When one of our Entourage2008 (exchange) users sends a meeting invite to a user in a different time zone using ical, the meeting shows in ical as the time the entourage user who created it, aka not adjusting for the time zone. Entourage to outlook calendar or another entourage calendar works fine, and iCal to iCal works fine; just not Entourage to iCal. Also, a calendar event from the iCal user to the Entourage user does adjust correctly for the time zone difference, which is why i'm exactly sure where the problem lies. I did post in the mactopia forums too so please don't yell at me for posting an 'entourage' problem in a mac forum. any help anyone could provide would be appreciated.
Thank you.
i'm on 10.5.7 with the latest updates for mac os x and the latest office for mac updates, and we are running off a hosted exchange server. we've experienced the same issue whether we have iCalis ("turn on time support") option enabled in iCal or not enabled.

It's annoying as it should not be this complicated. I've implemented a work around, but it's not ideal. I have entourage running but not open, and have sync services set to sync with ical. A new invite comes into mac mail, the user clicks on the ics file (which opens entourage calendar), accepts the meeting, and closes the entourage window. The correct time is in entourage calendar, and then syncs with ical and the meeting has the correct time for that time zone.
If anyone has found a real fix for this problem, please let me know.
Thanks for letting me know I'm not the only one Jim.
Slater

Datediff formula not displaying negative times

I have a DATEDIFF formula between two times that is not displaying a negative time when for example:
DateDiff ("n",next({caseintraop.orsetup_start_datetime}), {caseintraop.pat_or_out_datetime},
so if the time it pulls is 930am-1000am, it gives us 30 not -30 min.
When the field is formated to show negatives it does the oppostie and shows the postive times as negatives and vice versa.
Is there a way to format the formula to show the correct resulted time diffence?

You wrote
DateDiff ("n",next({caseintraop.orsetup_start_datetime}), {caseintraop.pat_or_out_datetime},
so if the time it pulls is 930am-1000am, it gives us 30 not -30 min.
This will never be negative because start time 9:30 am is before end time 10:00 am
DateDiff does not subtract end time from start time, if you want it to be negative just reverse the order.
Ian

IMac 27inch (late2009) 2nd display connecting a powerbook (2012) with mini displayport cable is not working

Any solution to solve this?

Solley wrote:
I'm trying to connect my new Dell U2713H to my MBPr early 2013 (runs Yosemite 10.10.2) using MiniDisplayPort-to-DisplayPort cable but I'm getting the floating msg on the Dell "No DVI-D cable. The display will go into Power Save Mode in 5 minutes." DP is plugged into the input DP port on the monitor.And of course power cable is plugged in as well. Do I miss something?
You probably need to press the buttons usually located in the bottom right corner of the screen to tell the screen to use the Displayport socket and not the DVI socket. It sounds like it is currently set to use the DVI socket which of course is not connected to your computer. As a result of not finding a computer attached to the DVI socket it then decides there is no point staying turned on and instead goes in to energy saver mode waiting for something to appear on the DVI socket.

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

PROBLEM WITH XML PUBLISHER AND GRAPH NOT DISPLAYING IN ORACLE APPS

Hi
All you XML Gurus here. I have a problem, When i create a report in XML Publisher desktop i can see a graph im putting into the report on preview and works fine. But when i upload the report as a rtf file into Oracle applications i can see everything else the table logo and stuff .. But just not the Graph Itself when run on the concurrant manager....
Problem number 2
Is there a way that i can use XML Desktop and create a line graph with 2 lines rather than 1 plotting
here is my xml for graph i have made with one line
chart:
<Graph>
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(.//SELF_OTHERS)}" rowCount="1">
<RowLabels><Label></Label></RowLabels>
<ColLabels>
<xsl:for-each select=".//SELF_OTHERS"> <Label><xsl:value-of select="BEHAVIOUR"/></Label>
</xsl:for-each>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each select=".//SELF_OTHERS"> <Cell><xsl:value-of select="SCORE"/></Cell>
</xsl:for-each> </RowData>
</DataValues>
</LocalGridData>
</Graph>
All help would be much appreciated to my 2 problems....
Thanks
Sha

Hi All
Will post solution tomorrow or Monday on blog. Heres the chart XML for now.
chart:
<Graph graphType="LINE_VERT_ABS"><LegendArea visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//SALE, 'YEAR'))}" rowCount="3">
<RowLabels>
<Label>SOFTWARE</Label>
<Label>HARDWARE</Label>
<Label>SERVICES</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/YEAR" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SOFTWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/HARDWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SERVICES)" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
with the following data
<?xml version="1.0" encoding="UTF-8"?>
<SALES>
 <SALE>
 <YEAR>2006</YEAR>
 <SOFTWARE>1200</SOFTWARE>
 <HARDWARE>850</HARDWARE>
 <SERVICES>2000</SERVICES>
 </SALE>
 <SALE>
 <YEAR>2007</YEAR>
 <SOFTWARE>1000</SOFTWARE>
 <HARDWARE>800</HARDWARE>
 <SERVICES>1100</SERVICES>
 </SALE>
 <SALE>
 <YEAR>2008</YEAR>
 <SOFTWARE>900</SOFTWARE>
 <HARDWARE>1200</HARDWARE>
 <SERVICES>1500</SERVICES>
 </SALE>
</SALES>
The latest Template Builder makes this a cinch!
Regards
Tim
http://blogs.oracle.com/xmlpublisher

Flash chart with dynamic sql query does not display

Hi,
In my schema SIVOA I have a lot of tables declared like this :
CREATE TABLE "SIVOA"."EVV_xxxx"
   (     "CLEF_VAR" NUMBER(4,0),
     "DATE1" DATE,
     "VALEUR" NUMBER(16,8) Only the last part of the name changes "xxxx". For example E009, E019, etc....
I am making a chart page with report and want the user to select a name of a table and I will display using dynamic sql query, the table report and chart.
P184_ENAME is a select list returning the last part of the name of the table, fro example 'E009', 'E019', etc.
P8_CLEF_VAR is an item containing a value. This value is a key retrieved like this :SELECT CLEF_VAR
FROM SIVOA.SITE_ECHELLE
WHERE SITE = :P184_ENAMEI built a classic report using a sql dynamic function :DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = :p8_clef_var' ;
RETURN (x);
END;:p8_clef_var is an itme containing the value '4544'.
This works perfectly fine !
When I use this sql fucytion into a flash chart it does not work. I get this message "No data found".
I do not understand why a the report get a result and not the chart !
But if i hard-code the number of the CLEF_VAR instead of fetching it from :p8_clef_var I get a nice chart ! Go figure !DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = 4544 ' ;
RETURN (x);
I cannot stay with the key (CLEF_VAR) hard-coded unformtunately !
My question is how to get the chart displaying properly ??
Thank you for your kind answers.
Christian

Alex,
Using your request, with the classic report I get results (data), but I get the same message with the Flash chart : "No data found" ! I don't know how to investigate this. i tried many things but nothing works.
Christian
PS I tried this :
DECLARE
   X   VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, ROUND(VALEUR,2) FROM SIVOA.EVV_'
      || UPPER (:p184_ename) ||
      ' WHERE CLEF_VAR = '
      || :p8_clef_var ||
      ' AND DATE1 BETWEEN TO_DATE ('''
||:P8_DATE_DEBUT||''', ''DD/MM/YYYY HH24:MI'') AND TO_DATE ('''
||:P8_DATE_FIN||''', ''DD/MM/YYYY HH24:MI'')'
RETURN (X);
END; But it does not work either. I could find that the SLQ syntax generated is good becaus I put it into an item which display the return done by the pls/sql.
What is sttange also with the classic report is that if I do click on next or previous to see another rows, I get the message "No data found". If I try to export the report I get an excel file with "No data fouid".
Does anybody already tried my "need" here ? i find strange thant I should not be the firs one trying to get a report an tables which name would be "dynamic".
Tahnk you.
Edited by: Christian from France on Feb 13, 2009 3:05 AM

Powerbook pismo with OS 10.4.9 not display battery time

Similar Messages

Maybe you are looking for