Powerbook refusing to start up.
Hi,
My powerbook is refusing to start up, it gets to a white screen with the grey apple logo, and then stops, It just stays on that screen.
i've used the install disc to use disk utility it verifies and repairs my permissions fine.
But after trying to repair my disc has the disc contained an error, it couldn't complete it's task, the message i was given was:
Keys out of order (this was in red)
rebuilding catalog B-tree
The volume Mackintosh HD not repaired
Error: The underlying task reported failure on exit (-9972)
and that was that.
i've also tried doing a firmware boot. Now I'm really not sure what's going on? or what to do, I've got files on there which I havent had a chance to back up do to working on them at the time. And so I need them, any advice? is my hard drive failing? because this problem has cropped up a number of times but I've usually managed to get it back up and running after a few attempts.
I had exactly the same problem!! but after i tried to repair the disk, fortunatly it managed to work. but then then as soon as i got the machine re-started i backed up the disk, did a 7 pass erase and then started from scratch.. it was a painful exercise but taught me the importance of an external back-up. What i would suggest is that you find another mac, and see if you can access your HDD via the other mac in firewire diskmode. This should enable you to get the data you need of your HDD and then do what i did... i.e. erase and re-install.. Hope that help.. and good luck.
Similar Messages
-
Installed the latest update and now Finder refuses to start/crashes
Hey guys,
I just installed the latest 10.4.11 update or whatever, along with Quicktime, iTunes, etc., and now when I log in to any account, Finder refuses to start. If it does start, it crashes.
I've googled around and all I could find was that I should switch from one Admin account to another to stop it, but that looked outdated and didn't work anyway.
I'm on a PowerBook G4, 10.4.11. Hopefully someone can tell me how to fix this soon.Hi, and a warm welcome to the forums!
Actually, I take double posting to mean you started the same Topic in two different placesat once!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120 -
As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
Anybody have any good advice?
I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry -
Firefox refuses to start up at all
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?
Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
Have you tried quitting Pages completely and the restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?
AIR give you classes to detect an on-line or off-line status, it's in
this way for the sake of flexibility for instance what happens if you
only what to sync data only on Saturdays at 2 am? If it were done
automatically that'll be a problem. And it isn't so complicated.
You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
it's an application that does everything you have in mind.
I don't understand your question abou file types.
An AIR app can communicate with almost every backend served tech
CF, .Net, PHP, RoR.
Sincerely,
Michael
El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
>
I have to say that I'm loving the picture! well cool!
>
Sorry but I don't quiet understand. I thought AIR did the updating
automatically? I didn't realise the developer had to program the
logic of how the updates take place? Is it a case in most AIR apps
that when online the app updates the server and once every intervel
(of however long) the local SQLite DB is synced to the more updated
server DB. Then when offline the developer has to sense that the app
is offline and store a log manually of the updates without any help
from AIR itself, and then update once it comes online again?
>
Can AIR link to anything more than a database on the server side
apart from webservices, for example .as files or any other file types?
>
What type of server is a Flex app stored on, is it a specific Adobe
server rather than a Java or .NET server?
>
Thank you so much for your last comment!
IrishAIRMax
> -
[SOLVED] Unbound refuses to start
Hi,
I've set up DNSCrypt and Unbound, as explained in the wiki. I've enabled systemd services both for DNSCrypt and Unbound and created configuration file, to have DNSCrypt started before Unbound.
Here is my /etc/systemd/system/dnscrypt-proxy.service.d/unbound.conf:
[Unit]
Before=unbound.service
DNSCrypt starts up just fine, however Unbound doesn't and I get following output, to systemctl status unbound -l command:
● unbound.service - Unbound DNS Resolver
Loaded: loaded (/usr/lib/systemd/system/unbound.service; enabled)
Active: failed (Result: start-limit) since Sun 2014-08-24 08:12:08 CEST; 52min ago
Process: 4949 ExecStart=/usr/bin/unbound -d (code=exited, status=1/FAILURE)
Main PID: 4949 (code=exited, status=1/FAILURE)
Aug 24 08:12:07 esme unbound[4949]: [1408860727] unbound[4949:0] fatal error: could not open ports
Aug 24 08:12:07 esme systemd[1]: unbound.service: main process exited, code=exited, status=1/FAILURE
Aug 24 08:12:07 esme systemd[1]: Unit unbound.service entered failed state.
Aug 24 08:12:08 esme systemd[1]: unbound.service start request repeated too quickly, refusing to start.
Aug 24 08:12:08 esme systemd[1]: Failed to start Unbound DNS Resolver.
Aug 24 08:12:08 esme systemd[1]: Unit unbound.service entered failed state.
The weird thing is, that sometimes Unbound will start, but I don't know on what it may depend. Does anyone have an idea, how to fix it?
Last edited by PiotrPyclik (2014-09-02 21:06:08)The strange thing is, that half of the times dnscrypt-proxy and unbound start without any problem - in such case, I can also stop and start them manually. Last time, unbound failed to start and here is output I've got:
~ sc-status unbound
● unbound.service - Unbound DNS Resolver
Loaded: loaded (/usr/lib/systemd/system/unbound.service; enabled)
Active: failed (Result: start-limit) since Tue 2014-08-26 21:31:10 CEST; 4s ago
Process: 1834 ExecStart=/usr/bin/unbound -d (code=exited, status=1/FAILURE)
Main PID: 1834 (code=exited, status=1/FAILURE)
Output stays exactly the same, regardless of status of dnscrypt-proxy. Also, it is different than in my first post. I don't know why, because I haven't changed configuration.
Here is my netstat -lutnp:
~ _ netstat -lutnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 236/connmand
tcp 0 0 127.0.0.1:8118 0.0.0.0:* LISTEN 254/privoxy
tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 265/btsync
tcp 0 0 0.0.0.0:62204 0.0.0.0:* LISTEN 265/btsync
tcp6 0 0 ::1:53 :::* LISTEN 236/connmand
udp 0 0 127.0.0.1:37504 0.0.0.0:* 265/btsync
udp 0 0 0.0.0.0:62204 0.0.0.0:* 265/btsync
udp 0 0 0.0.0.0:3838 0.0.0.0:* 265/btsync
udp 0 0 0.0.0.0:1900 0.0.0.0:* 265/btsync
udp 0 0 0.0.0.0:59303 0.0.0.0:* 233/systemd-timesyn
udp 0 0 127.0.0.1:53 0.0.0.0:* 236/connmand
udp 0 0 192.168.0.101:49312 0.0.0.0:* 265/btsync
udp6 0 0 ::1:53 :::* 236/connmand -
My Apple Mobile decive doesn't recognise my iPhone and refuses to start.
My Apple Mobile device doesn't recognise my iPhone and refuses to start, I've tried all the trouble shooting options on here and none of them have worked, culd someone help me out please?
Make sure you have the Latest version of iTunes installed on your computer...
http://www.apple.com/support/itunes/install/
Are you running as an administator...
Have you ever used this phone with this computer before... -
I had reset my iPhone and my Dictaphone refuse to start. I sea a microphone picture but when I push the 3 horizontal bars or the red buttom, they return to the main menu...
rstevenson wrote:
If i factory reset my iPhone will it relock to O2?
I've had my iPhone 3G for a couple of years and when out of contract i asked O2 to unlock it, which they did. I've used a Three sim card and it works okay. I've now decided to sell it but before I send it to the buyer i want to factory reset the phone. Will it remain available to use on any network once i've reset it, because i've advertised it as an unlocked phone?
If it was officially unlocked by O2 it will remain unlocked if reset or updated.
Also, just as a side note if you can help. Its running iOS 3.1.3. Once factory reset and connected to iTunes will it force an iOS 4 update or can you choose not to update the OS?
If you restore it in iTunes it will be updated to the current release, 4.3.1. There are ways around this; Google is your friend. -
Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have taken with my nikon D500 and transferred to WINDOWS 8.1. i have tried to re-install lightroom : the procedure asks for the serieal number , but refuses to accept the number that always worked. PLEASE help!! jan
If you are certain you have the right serial number, there really isn't much we can help you with here. You might try downloading and installing the last version of Lightroom 2. It will be the trial version, but when the trial screen appears there is an option to indicate that you have a serial number. Incidentally, Lightroom serial numbers start with the first four digits being 1160.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 2.7 - English, French, German -
Dreamweaver cs4 refuses to start. Error window pops up but there is no message
I recently downloaded an Dreamweaver extension (HTML5) for cs4. Shortly after I got an error while I was working in Dreamweaver about the ssi.html server. When I closed dreamweaver and tried to restart, Dreamweaver refused to start. There is a popup message window with an OK button but there is no error message in it. I already removed my personal configuration files but that didn't help. Any suggestions. I looked on the Adobe site but most links to technical notes that could be helpful, were broken.
I have exactly the same problem, except that I regularly open up the npr site. But here is the real problem. I open firefox>preferences>advanced>encryption>view certificates>add exception. But here is the problem. I can not click on the box to permanently store exception. This box appears permanently closed.
I am currently running firefox 9.01, and I've got to say I never had any problems with firefox in all the years I've used it. But ever since it went through this dizzying series of upgrades from 3.6 to the present it has given me problems.
I am a regular npr listener, and so this annoying error message is really making me consider permanently leaving firefox for chrome or safari. -
Hi,
I wanted to make space on my T43 and made the unfortunate mistake of compressing the hard drive. Everything was fine till i turned the computer off. Now when i turned it on the next day, it refuses to start up and gives an error message saying ' AEQSPQ is compresse, Press ctrl+alt+del to restart' . But when I press these, it does not restart but temporarily shows me the IBmM logo page where I have an option to interrupt normal startup by going into the BIOS utility, and then it goes back to the same error message. I do not know what to do in the BIOS part.
I am getting an ATA hard drive case to back up my computer memory but i do not know how to fix this problem. I have important documents on my computer that i need urgent access to and cannot. Desperate need of help here. Would appreciate advice. Thank you.Hi,
Thank you for the prompt reply. I chose the built in windows option to compress and it did not distingusih it as a non compressible file. I went to my computer and right clicked on drive C, where i chose 'compress files to make space'. It took a few minutes and was done.
The error message in itself does not give any hits on google but i found some similar cases of hard drives being compressed and people getting the same error message as me but with a different file name.
My case is very similar to this case, : http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/39f3b8cf-419f-435b-818d-11cd05d17ff..., only difference is that she has an HP and I have an IBM.
According to the post above, it is a very common problem and HP has even written an article about it, with step by step instructions on how to fix the problem but i do not know how to apply these steps to my T43. You might have guessed by now that I am no computer whiz. Hope u can assist. Once again, thanks a bunch. I appreciate your help. -
Apple paid apps refusing to start
I've had this before, and seen it in threads going back some time but haven't found a definitive answer. Occasionally (rarely thankfully) some apps will refuse to start on my iPhone 4 (currently iOS 5.0.1). The icon zooms out as normal but then simple returns to the Home page. This morning none of my paid Apple apps would start, but all the "built in" ones were fine. I re-downloaded Numbers and all of them then worked. In fact, downloading anything seems to fix the problem. But it will be back, I know it will. Perhaps just the act of using my Apple ID and password is the important thing, and not the actual downloading. Does anyone have a definite answer to this one?
Hi theafroguy, Welcome to the Forums.
It may be worth trying again off and on.
The forums themselves go off line for varying degrees of time. A thread (???) said Apple was working on it. It's been going on for weeks. A real PITA. -
Rsyslogd refuses to start after pacman upgrade
Hello,
After last pacman upgrade rsyslog refused to start.
This also caused boot problems - systemd would go into infinite loop trying to start rsyslog and failing miserably.
I've disabled rsyslog.service from chroot environment and booted from disk - it helped.
I've also noticed that latest package version ( rsyslog-7.2.6-4-x86_64) does not ship with /etc/rsyslog.conf, so
upgrading to it removes this file which is why rsyslog refused to start
Downgrading, copying file elsewhere and moving it back to /etc/rsyslog.conf is a simple workaround.
Previous package versions had this file inside ( I checked rsyslog-7.2.4-1 and rsyslog-7.2.6.1, both for x64)
Hope that helps someone.
Should I perform anny additional steps to resolve this issue ( e.g open a bug ? )
Thanks for any help!The package was changed with 7.2.6-4 to copy rsyslog-example.conf to /usr/share/doc/rsyslog/ rather than as configuration to /etc.
Probably because the rsyslog devs apparently changed it in a way that causes the program to instantly go into an infinite loop.
Since it won't start at all without /etc/rsyslog.conf present, I just copied the default Debian ships 7.2.6 with (available in here). Works properly so far.
Last edited by misc (2013-03-14 23:16:19) -
My Iphone 4 refuses to start. I have already tried to recover my Iphone but the recovery fails at a certain point so it doesnt finish and Im still unable to use my Iphone. Does anybody know what to do?
Hello Maniac Jack,
Thank you for getting back to me and offering your input. I did attempt what you suggested and it wont do anything, It won't trun off or on. It is frozen. Actually I am on my way to an Apple store to have them look at it. I called to make an appointment, they said I needed to go online to make appointments. So I go the apple site to make an appointment and now I have to download Safari in order to do that. Well, I already have it downloaded but I don't see why it has to be on their stupid browser. All I want is an appointment dammit! What the heck is Apple trying to do with this egotistical, power hungry, bull sheeet! It has taken me 15 minutes of my time just to have them look at their defective goods. I am begining to have my doubts about Apple and what they are trying to accomplish. I really appreciate you helping me and I don't think you are an Apple employee, so please don't think I am launching on you. I really am grateful to vent this before I walk into their store and go postal on them.
Hope you have a great rest of your day and that my electromagnetic field doesn't rub off on ya.! tee hee
Maybe you are looking for
-
Scaling Out PowerPivot for SharePoint 2013
I've been struggling with the TechNet/MSDN documentation on adding PowerPivot servers for scale-out implementation. http://msdn.microsoft.com/en-us/library/2dbddcc7-427a-4537-a8e2-56d99b9d967d My test farm consists of 2 web front end servers and 2 ap
-
An archive that did not work?
HI.. W/ about 9 GB left, Ive been burning photos to disk, from within Iphoto, to delete some of the 6000 images Ive amassed. I deviated from that on monday, while wanting to be double-safe, within Finder, I highlighted my Iphoto folder hierarchy and
-
How do you assign keywords in iMovie 10.0.7?
I cannot find how to assign keywords in iMovie 10.0.7.
-
Hi this is saroj. i am new to alv reports.i have done a alv report by using FMs events_get,commentary_write,grid_display. i am getting the data but i am not getting the header text of report and logo. my coding is like this. tables: kna1. types: begi
-
Subscription notification email - deleted clicking on link - Urgent
Hi All, We are using NW04 Portal SP11, we are using Subscription service, everything is fine except one issue.. when we subscribe a document, we are getting an email with the link "CR.txt" Subscription Administration generated this notification: The